Bundling machine banding machine

ATS Tanner CE 340 / 30

Condition: used, ATS Tanner ATS-CE 340/30 Banding Machine Product Width: 1”-13” Product Height: up to 6” Lsdpfx Aowlgz Ssa Ejta Speed/Cycles: 22-26 cycles/min. Performance: Up to 26 bandings per minute Band width: 30mm Voltage 115 V/50 Hz, 115 V/60 Hz Electrical Power: ca. 0.2 kW Weight: 25 kg

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Ltjdeh Nrh Uopfx Aa Eja Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Year of construction: 2014, condition: like new (used), functionality: fully functional, Polytype BDM 482 8 colour cup printer 2014 In excellent condition; only 18.500 hours made. Colours : 6 colorheads mounted. up to 8 colors possible. Maximum output/hour : 24.000 cups/hour Minimum cup diameter : 60 mm Ltjdpfxohbddks Aa Esa Maximum cup diameter : 190 mm Minimum cup height : 30 mm Maximum cup height : 160 mm Uv system : Uviterno Pre treatment : Corona

Condition: used, Year of construction: 2004, machine/vehicle number: 15005225, Automatischer Banderolierautomat - Automatic Banding Machine HIMA BA 30/800Baujahr / Year 10/2004 - Serial-No. 15005.225 Beschichtetes Kraftpapier bzw. Kunststoff-Folie Coated paper or plastic filmTechnical specifications: Leistung / Output: up to 23 Takte/min / cycles/min. Produktbreite / Width of banded product: 30 - 310mm Produkthöhe /Stack height: 3 - 200mm Bandbreite / band width 30mmTaktauslösung /Triggering of cycle: – von Hand/Starttaster / manual/start button – über Fußschalter / foot actuator – über Automatiktaster / automatic mode button Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Leden Aw Ucopfx Aa Eota On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Used C.P. Bourg BB3002 Single-Clamp Perfect Binder / EVA The C.P. Bourg BB3002 is a professional perfect binder for producing softcover books and brochures. This robust and reliable model is ideal for medium to large print runs in printing and binding shops. Key features: - Uses EVA hot melt adhesive for strong and durable binding - Cover feeder station for automatic cover feeding - Precise milling unit for optimal glue penetration - Glue application system with side gluing for increased stability - Touchscreen control panel for easy setup and operation - Memory function for up to 50 recurring jobs - Automatic format adjustment for quick changeovers - Integrated cooling section for fast curing Technical specifications: - Production speed: Up to 600 books/hour - Book block thickness: 1 - 60 mm - Book format: max. 320 x 380 mm, min. 100 x 100 mm Ltjdsu Srpgspfx Aa Esa - Cover weight: 80 - 300 g/m² - Cover magazine capacity: 80 mm - Book block paper: 60 - 160 g/m² - Milling depth adjustable between 0 and 3 mm - Glue type: EVA hot melt - Glue temperature: Adjustable from 130°C to 180°C - Electrical connection: 400V, 3 phases, 50 Hz - Compressed air connection: 6 bar - Dimensions (L x W x H): 2950 x 1135 x 1370 mm - Weight: approx. 1100 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Year of production: 2005 Manufacturer: GUK-Falzmaschinen Griesser & Kunzmann GmbH & Co. KG Machine availability – on request; Machine in use; possibility to carry out work tests during inspections; Good technical condition; Folding machine manufactured by the renowned German company GUK equipped with a high pile feeder (sheet picking with a suction roller from above) FL2-50, 2 folding pockets aggregates, pocket with maximum working widths of 50 cm and mobile chute delivery. Folding machine GUK model FA 50/6-6 FL2-50 – infeed width 500 mm (6+6 folding pockets). Maximum input format: 500 x 850 mm Minimum input format: 105 x 145 mm Minimum folding length: Ltsdsrx S Iwjpfx Aa Eea 45 mm Feed rate of sheets from feeder: 40 - 180 m/min Maximum performance: 27.000/from sheet A4 Power supply: 400 V/50 Hz Machine equipment: High pile feeder FL2-50; Batch counter. Multifunction counter programming the operation of the machine. Ability to fold sheets in groups (lots) of the given number in each lot, with stepless adjustment of the spacing between parties. I. folding unit FA 50/6, 6 folding pockets; Sound reduction hood, top. II. folding unit FA 50/6, 6 folding pockets Sound reduction hood, top. Mobile chute delivery S 520. To be added after I or II folding station.

Year of construction: 1997, condition: ready for operation (used), Built in 1997 Ljdpedxtlxefx Aa Esta Size max 370 x 370 mm min 100 x 100 mm Speed max 100 c/min Weight 250 kg (approx.)

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device Ltjdpfewypp Iex Aa Eja - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F-500, working width: 530 mm, type of input current: AC, input voltage: 400 V, overall weight: 200 kg, space requirement height: 1,070 mm, space requirement length: 1,100 mm, space requirement width: 710 mm, input current: 15 A, year of last overhaul: 2024, input frequency: 50 Hz, empty load weight: 200 kg, cutting length (max.): 530 mm, product width (min.): 530 mm, Electric Punching Machine 530 mm. maximum punching width. Complete with 3:1 punching tools for books. Other punching specifications are available, such as 2:1 and spiral coils. POA. Maximum punching thickness per stroke: 2.5mm. Maximum output: up to 1,000 punching per hour, depending on materials used and skills of the operator. Ltedpfx Aaerzuf De Esa Power: 400v 3 phase 50/60 Hz Dimensions: H 1070 x D 710 x L 1100 mm Weight:195 Kg nett

Condition: used, Year of construction: 1981, machine/vehicle number: 5171754, Palettenheber / Pile Hoists - Stack Lift Polar Mohr HL 600Year 1981 - Serial-No. 5171754 Format / Size max. 1100 x 800mm Hebekapazität / Loading capacity max. 600KG Hubhöhe / Lifting height max. 1000mm mit Lichtschranke zum automatische Anheben des Schneidgute with light barrier for automatically lifting the material paper Lodpfxeh Ax T Te Aa Ejta Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test