Used Vitap Quartz for sale (31)

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 020313L, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Hjdpfx Aajxn Hzbscenu Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard

Condition: good (used), Year of construction: 2015, Code: 0185 Brand: VITAP Model: QUARTZ 3 - CE Standard Automatic edge bander for wood, Pvc, Abs and melamine edges for carpentry, furniture, kitchens, custom-made furnishings, panels and various - CE Standard - Year 2015 Technical data: Panel height mm 10-50 Edge thickness mm 3 Minimum panel length mm 140 Track feed speed mt/min 7 Composition: Gluing unit: Glue tank capacity kg 1 - Power consumption Kw 3,5 End cutting unit: Blade rotation speed rpm 12000 - Power consumption Kw 0,7 - Tools mm 80x2 F32 Trimming unit: Blade rotation speed 12000 rpm - Cutter diameter 68 mm Z6 R=2 - SIKO display adjustment Hodpfjw D Ehnsx Aaconu Protective cabin Panel support Suction ports n° 2 diameter 60 mm - n° 2 diameter 40 mm Max installed power 5 Kw Compressed air 6 bar Overall dimensions mm 2100 x 800 x 1500 Weight kg 400

Year of construction: 2023, condition: ready for operation (used), Main Drive Spindle speed range 3600 RPM Spindle motor power 5 kW Tool taper ISO30 Number of axis 3 Workpiece Workpiece X 270 mm Workpiece Y 1250 mm Hnedpfxoxn U Dwj Aacsu Workpiece Z 50 mm Workpiece weight 40 kg Additional Equipment 20" LCD TFT monitor Industrial PC WSC user interface with Lister, parametric tools, and parametric setup Graphical CAD programming TPA EDI32, basic version USB port Storage of all files Macro programming Import of DXF files CE compliant Main Drive Spindle speed range 3600 RPM Spindle motor power 5 kW Tool taper ISO30 Number of axis 3 Workpiece Workpiece X 270 mm Workpiece Y 1250 mm Workpiece Z 50 mm Workpiece weight 40 kg Additional Equipment 20" LCD TFT monitor Industrial PC WSC user interface with Lister, parametric tools, and parametric setup Graphical CAD programming TPA EDI32, basic version USB port Storage of all files Macro programming Import of DXF files CE compliant This 3-axis VITAP K3 CNC Wood Machining Centre was manufactured in 2023. Consider the opportunity to buy this VITAP K3 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: good (used), Code: 0097 Brand: VITAP Model: ALFA 35 T - CE Standard Semi-automatic multiple boring machine with 35 spindles for furniture, kitchens, bathroom furniture, custom-made furniture, panels - CE Standard Technical data N° 35 spindles with quick coupling Centre distance between each spindle mm 32 Hedpfx Aaewpw Dxecenu Centre distance between first and last spindle mm 1088 Max depth of hole mm 70 Board dimensions mm 1454 x 590 Spindle rotations per minute 2800 Motor power Hp 3 Turret with 6 different depth positions Side fence Horizontal/vertical 45 degree pneumatic tilting head Metric bar 3000 mm with stops Fence for 45 degrees frames Operating pressure 6- 8 atm Overall dimensions mm 1590 x 860 x 1140 h Weight kg 454

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 220428 an, feed length X-axis: 6,000 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 50 mm, workpiece weight (max.): 100 kg, power: 5 kW (6.80 HP), Selling K2 2.0 due to machine replacement. Very good machine, requires only one operator. Configuration: 1 milling spindle 5.0 kW 12 + 4 + 4 pcs. drilling spindles 1 grooving saw Hedjxk Ut Repfx Aacenu Return conveyor pushes elements back to the operator or behind the infeed machine. Max. element size – x 1250 x 50 mm

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Dowel drilling machine Hnjdpfx Aaeuf Dmueceu Make Vitap Type Forma 63 H year 2000 with 3 units 2x bottom 1 x lateral with 21 spindles Pneumatic

Condition: like new (used), Year of construction: 2018, Number of independent vertical spindles: 8 Number of horizontal X-axis spindles: (2+2) No. of horizontal Y-axis spindles: (1+1) No. 1 blade for channel execution on the back of the cabinet: (ø 100 mm) Max. panel thickness: 50 mm Control: Full Parametric Max panel weight: 25 kg Max panel dimensions (see layout) : X ,Y 920, Z 50 mm Min panel dimensions: X 270,Y 150 (70 op.), Z 12mm Numbers of controlled axes: 3 Panel feed rate: 25m/min Spindle rotation: 3600 rpm Hedouxmvzjpfx Aaconu Operating pressure: 7 bar Suction mouth diameter: ø 120 mm Suction rate: (2000 mc/hour) - (30 m/s) Max depth of all horizontal drilling in X and Y: 30 mm Max drilling depth in vertical: 45 mm Max horizontal drill bit diameter: 12 mm Max vertical drill bit diameter: 35 mm Motor: 1.5 kw Dimensions: 2200x1350x1550 mm Weight: kg 715 CE standards

Condition: used, Year of construction: 2020, WELCOME TO THE "BAR NESTING REVOLUTION" WITH ALL THE ADVANTAGES OF CLASSIC NESTING PROCESSING BUT WITHOUT ANY MORE LIMITS IN HORIZONTAL DRILLINGS. To move from high production to "JUST IN TIME PRODUCTION" it is necessary to review the production methods nowadays. production and adequate cost reduction to respond to ongoing market trends. Automatic tool changer with 4 positions and large capacity Y-axis 1250 mm. Patented D-D-T (Double Dynamic Transport) system with continuous panel movement without any piece recovery via 2 clamps. Maximum panel grip, panel thickness from 3 to 50 mm. 4-sided squaring device 0-3 mm. Vitap Bar Nesting System. 12 independent vertical spindles. 2 + 2 horizontal spindles on the X-axis. 2 + 2 horizontal spindles on the Y-axis. Blade d.100 mm. ISO 30 5kW electrospindle (rpm 12000\24000) Full Parametric Control with the ability to import CAM and DXF files Maximum panel dimensions x infinity \ y 1250 mm \ z 50 mm Minimum panel dimensions x 270 mm \ y 150 mm \ z 3 mm Weight 1400 Kg Dimensions 2900 x 1650 x 1890 mm Hnodpewu D I Ujfx Aaceu

Condition: ready for operation (used), Year of construction: 2023, This VITAP BLITZ 2.0 multi-spindle drilling machine was manufactured in 2023. It features a drilling head at 3500 rpm, three horizontal and vertical independent spindles, and a glue and dowels inserting unit. The machine is equipped with a 19" LCD TFT monitor, Windows PC system, and Albatros TPA software. Ideal for "JUST IN TIME" or mass production. Contact us for more information about this machine. Hnodpfoxb E Imox Aacsu Application Types Boring & Drilling (Wood)

Condition: used, Vitap Alfa35T dowel hole drilling machine for precise and fast drilling of dowel holes (horizontal and vertical) in solid wood and panel materials. The machine is ideal for series production in furniture construction and for precise joints in interior design. It includes a stop for miter joints. drilling spindles: 35 division: 32 mm Spindle distance: max. 1,090 mm drilling depth: adjustable up to approx. 65 mm Hjdow Ektlopfx Aacsnu Pivot: pneumatic

Condition: used, Year of construction: 2016, Vitap Eclipse Edgebander for round shaped, curved workpieces Semi-automatic edge banding machine for large round or curved workpieces with a panel thickness between 10 and 60 mm and a belt thickness between 1 and 3 mm. The 60 mm height is only possible with an edge banding thickness of 1 mm. If the edge band is thicker, it depends on the quality of the band and must be tested beforehand in connection with the cutting unit. Description; Two copy rollers for the shape of the workpiece to be scanned Gluing station Glue tray with a capacity of 1 kg Two 800W heating elements with electronic temperature display via the PLC Glue application via glue roller Glue tray made of aluminum for heat distribution Glue supply can be adjusted by means of a button Automatic cutting unit for edge banding material on the roll from 3 to 45 mm Hedpfx Aaowgb Hxsconu Aggregate is activated by a sensor for closed edge tape with a perfect connection or by an encoder if only 1 side is pasted Laser system for length determination, no pre-measurement necessary On-off capability for throughput Height-adjustable table for narrow panels On-off capability for milling aggregate Two copy rollers for the shape of the workpiece to be scanned Milling unit equipped with 2 x 0.5 kW (15000 rpm high frequency) with top, bottom and front copy rollers Milling unit equipped with blades R=2, Phase 15°, D=69, Z=6 Large panel turntable with vacuum to hold product (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), number of spindles: 35 Hedpfx Ajw U Aiioaconu pneumatic head inclination

Year of construction: 1999, condition: excellent (used), 21 drilling spindles Spindle spacing 32mm Pneumatic clamps Possibility to drill vertically, horizontally and at an angle of 45 * Hsdpfsh Txmtox Aaconu Depth adjustment from 0 to 80 mm

Condition: ready for operation (used), Technical characteristics Hnsdpfx Aaettdm Dscju Semi-automatic 13-spindle multi-spindle drilling machine Distance between chucks : 32 mm Center distance between first and last chuck : 384 mm Max. drilling depth : 75 mm Spindle speed : 2800 rpm Cast-iron table 600 x 400 mm Max. workpiece dimensions : 600 x 3000 mm 1.5 hp motor 1 vertical pneumatic presser Cycle start with foot pedal Operating pressure 6 bars Power and Motors Voltage: 380 V Pluging: Three-phased Power: 2 Kw Motor: 1,5 CV Overall dimensions Lenght: 750 mm Width: 560 mm Height: 1200 mm Weight: 160 Kg

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 600 KG Additional Equipment Glue Pot Capacity: Max glue pot capacity 1 Kg (with optional 2 Kg glue pot) Gluing Unit:Edge gluing on open and closed curved panels of small and large dimensions/1 gluing roller/2 rollers to copy the shape of the panel/2 800 W resistors with electronic temperature control/Manual adjustment of the glue quantity/Glue temperature adjustment/Automatic edge cutting system PLC System: For setting the measurement and cutting of the edge with encoder reading Laser: Facilitates cutting programming for closed pieces without the need to measure the piece Piece Feeder: On/Off automatic piece feeder Work Surface: For edging and trimming small pieces Edge Magazine: Rolled edge magazine with idle roller system Hnsdpfx Aaov H E S Tscsu Trimming Group: 2 high frequency 0.5 kW motors with rotation speed of 15000 rpm /On/Off trimming unit/Pneumatic lifting of the two motors/2 brazed cutters R=3 Z=6/ Articulated Arm: Complete with workpiece depression table for edging and trimming large pieces This VITAP Eclipse edgebander was manufactured in 2018. Ideal for precise edge finishing, it ensures consistent performance for woodworking projects. Consider the opportunity to buy this VITAP Eclipse edgebander. Contact us for more information. Application Types Edge Banding

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 601264, Technical specifications: -spindles 21 -center distance between spindles 32 mm -width of the drilling head 640 -maximum hole depth 70 Hnsdpjtrn Ryofx Aaceu -maximum dimensions of drilled parts 800x3000 -spindle revolutions per minute 2800 -motor power 2 kW -normal pressure 6 - 8 bar -weight of machine 295 -machine size 1070x890x1240

Condition: new, Year of construction: 2020, Machine type K2 2.0, new machine, as new, the machine bears the CE label, automatic, the machine has 4 axes, flow processing machine, with air pressure cylinder for holding item, works beneath the item, working width 150/1250 mm, working height 3/50 mm, working length 270/5000 mm, feed speed 25 m. per minute, motor size 5 kW, with 4 tool holders, tool mountings: ISO30, blade diameter 100 mm., tolerance precision +/- 0.15 mm, number of drill spindles 20, maximum bit length 43 mm.. Hodsh I Nd Sjpfx Aacenu +Machine is also bought with software for TPA codes +Licens for programming on external PC

Condition: used, Vitap Alfa35T dowel hole drilling machine for precise and fast drilling of dowel holes (horizontal and vertical) in solid wood and panel materials. The machine is ideal for series production in furniture construction and for precise joints in interior design. Hnedpfx Aaewdulcscou drilling spindles: 35 division: 32 mm Spindle distance: max. 1,090 mm drilling depth: adjustable up to approx. 65 mm Pivot: pneumatic

Condition: like new (used), functionality: fully functional, universal TRIMMING machine model VITAP RC 91 second-hand machine, like new machine equipped with 2 cutters with copying device and cutting circular saw volt. 380 / 50 edge thickness (min / max) mm. 0.3 / 3 edge height (min. / max.) mm. 10 / 60 TRIMMING , ROUNDING machine model VITAP ROUNDERN Hjdpfx Aowm Iu Aeacjnu second hand machine , like new

Condition: ready for operation (used), Technical characteristics Hnodpfstqq Hpox Aacju Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Lenght: 1142 mm Width: 800 mm Height: 1140 mm Weight: 300 Kg

Condition: used, machine/vehicle number: 007247, Maximum edge height: 3 mm Hodpfet H Twyex Aaconu

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 510501 U, workpiece weight (max.): 25 kg, saw blade diameter: 100 mm, workpiece height (max.): 50 mm, drilling depth: 45 mm, saw blade speed: 7,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Drilling and Milling Unit Number of independent vertical spindles: 8 Number of horizontal spindles on X-axis: 4 Number of horizontal spindles on Y-axis: 2 Saw blade unit – diameter: 100 mm Milling head: 3.6 kW, ISO 30 – 12,000/24,000 rpm Spindle speed: 3,600 rpm Saw blade speed: 7,000 rpm Maximum horizontal drilling depth (X and Y axis): 30 mm Maximum vertical drilling depth: 45 mm Maximum horizontal tool diameter: 12 mm Maximum vertical tool diameter: 35 mm Number of controlled axes: 3 Motor power: 1.5 kW Workpiece Maximum panel thickness: 50 mm Maximum panel weight: 25 kg Maximum panel size: X 1,100 mm, Y 50 mm Minimum panel size: X 270 mm, Y 150 mm, Z 12 mm Panel feed speed: 25 m/min Control System Control: Fully parametric MACHINE DETAILS Electrical Data Rated voltage: 400 V Frequency: 50 Hz Rated current: 21.1 A Max. surge current: 0.018 kA Total power: 6.4 kW Compressed Air and Extraction Air pressure: 7 bar Extraction diameter: 140 mm Exhaust air volume: 2,000 m³/h – 30 m/s Maximum air consumption: 60 Nlt./min Hodpfx Aasw Dzm Tjcsnu Dimensions & Weight Dimensions: 2,520 x 1,600 x 1,680 mm Weight: 900 kg

Condition: new, Year of construction: 2021, Machine type K2 2.0, new machine, the machine bears the CE label, automatic, with CNC control, the machine has 4 axes, flow processing machine, with air pressure cylinder for holding item, works beneath the item, working width 1250 mm, working height 50 mm, working length 6000 mm, motor size 5 kW, the machine's motors are rated at 400 volts, motor rpm 1200/2400 per min., with 4 tool holders, tool mountings: ISO30, feed speed 25 m. per minute, tool diameter max. 35 mm., tolerance precision +/- 0.15 mm, number of drill spindles 20, maximum bit length 43 mm., air consumption: min. 7 atmospheric pressure, complete with some accessories. Hnedpfsh Izk Usx Aaceu

Year of construction: 1999, condition: used, functionality: fully functional, Manufacturer VITAP Model SIGMA 2TA Machine type Multi support drilling system for line and dowel drillings Year of manufacture 1999 Feed-through line – yes Drilling supports from below – 4 Horizontal drilling supports – 2 Drilling block positionin gmanually Working width max2.500 mm Hsdpeiffpxsfx Aaconu Working depth700 mm Passage height max 40 mm Grid 32 mm – yes Drilling blocks per support – 2 Number of clamping bridges 2 Pneumatic top pressure Drilling support positioning – manually Drilling bars 90° pivotable Drilling spindles per support – 2 CE marking – yes Weight 1.600 kg

Condition: excellent (used), 6 drilling units with two heads two side heads spindles span 32mm Hnedpfx Aaew Ad Tmocou max material length 2250mm magazine feeding manual regulation of units span rotated heads pneumatic top pressure drilling depth regulation