Used Versatile 900 for sale (5,913)

Condition: new, new ! twin shaft paddle mixer Fgsdpoyu I Evefx Acwoa all stainless steel variable speed microcontroller 13,2 kW Max. loading volume: ± 500L 2 mixing directions inspection gantry safety lid Easy clean CE-approved with vacuum pump Büsch 6,2 kW + Loader for eurobins

Condition: used, tank capacity: 900 l, GENERAL INFORMATION Equipment: Disc valve Design: upright Remarks: Height-adjustable knuckle screws on the feet are partially missing (must be retrofitted on site for installation; otherwise, the outlet would be lower than the feet); Inner tank surfaces partially show metallic discoloration; 2 tanks have a dent at the junction of the cylinder and top head (see photos). Inner diameter: 890 mm Total height: 2,100 mm Location: Bremen Volume: 900 liters Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 1,460 mm Last intended use: Brewery TANK Support type: Height-adjustable feet Number of feet: 3 units EQUIPMENT Outlet: 35 mm Fjdpfxjyckxus Acwjga MATERIAL PROPERTIES Material of feet: Stainless steel

Condition: used, tank capacity: 900 l, GENERAL INFORMATION Features: disc valve, spray head Design: oval Fsdpjyckvtjfx Acwsga Overall width: 760 mm Overall height: 1,330 mm Overall length: 1,850 mm Location: Bremen Volume: 900 litres Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Last application: beer tank TANK Support design: height-adjustable feet Number of feet: 4 pcs EQUIPMENT Outlet: 35 mm Note: slight residues MATERIAL SPECIFICATION Foot material: stainless steel

Condition: used, tank capacity: 900 l, GENERAL Equipment: butterfly valve, spray head Design: oval Remarks: Height-adjustable foot screws incomplete (compensation must be provided on site for installation); a spray head may not be present in every tank Overall height: 1,950 mm Location: Bremen Volume: 900 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,290 mm Previous use: beer tank TANK Support type: feet height-adjustable Number of feet: 4 pcs Fgjdoyckvmepfx Acwsa EQUIPMENT Outlet: 35 mm Note: slight residues MATERIAL SPECIFICATION Feet material: stainless steel

Condition: ready for operation (used), * Brand: HONERT * Type: Reversible (can turn left and right) * Dim: length 3200 mm - width 900 mm * Driving: 4 pieces vibration motors * Incl.: steel construction and springs. Fgedsywmnpjpfx Acwsa

Condition: used, Year of construction: 2008, Deburring machine belt grinder Manufacturer: Weber Type: MK 900 Year of manufacture: 2008 Fgodpfx Acjyy Dcvjwoa Control: Weber "i-Touch" controller with multi panel Abrasive belt length: 2,620 mm Working width: 900 mm Working height: 900 mm (constant) Workpiece thickness: 3–120 mm (depending on model, up to 1–100 mm) Feed rate: 1–10 m/min (infinitely variable) Belt drive power: up to 37 kW (depending on station) Specially designed for processing oxy-fuel and plasma cut parts (heavy plate) 2426

Condition: good (used), Fan, blower, electric motor, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, axial ventilator, suction fan, high-performance axial fan, stable fan -Manufacturer: Multifan, Axial fan, Duct fan type 6E40 -Motor: 0.17 kW 900 rpm -Flow rate: 3760 m³/h -Protection class: IP 55 -Number: 1x fan available -Dimensions: 500/450/H480 mm Fodpfsywib Eox Acwega -Weight: 10 kg

Condition: good (used), Fan, ventilator, electric motor, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan, stable fan -Manufacturer: Multifan, built-in fan suction fan type 6E63 -Engine: 0.60 kW 900 rpm -Conveying volume: 12020 m³/h -Fan: Ø 630 mm / Ø 640 mm -Protection class: IP 54 Fgjdpfx Acsuncx Aewsa -Number: 2x fan available -Price: per piece -Dimensions: Ø 630 x 340 mm / Ø 640 x 340 mm -Weight: 13.1kg / 13kg

Condition: good (used), Year of construction: 1981, Table size 1300 x 400 mm Tool recording A4, ISO 40 Trajectories X-axis, autom./hand 1000/1020 mm Y-axis, autom./hand 350/370 mm Z axis, autom./hand 430/450 mm Speed range, 2 levels 32 – 1400 U/min Pinole in the vertical milling head yes Milling head, swivel ± 90 ° Pre-push X/Y axis, continuously 10 – 1000 mm/min Pre-push Z-axis, continuously 4 – 400 mm/min Breaking X/Y axis 5 m/min Rush pass Z-axis 1.8 m/min Drive power, vertical + horizontal 3.2/4 kW Area requirement L x B x H 3200 x 2700 x 2200 mm Fgsdpfx Acjd D Tf Hswsa Weight 2400 kg Accessories/Special features: • NC-Point Stretch Control HEIDENHAIN TNC 131 S • Interface RS 232 • Stepless feed • Automatic and/or manual operation possible • Safety devices/-queries for securing hand cranks when the X-Y and Z axis are moved manually as well as manual tool clamping • Vertical and horizontal milling spindle • Pinole in vertical milling head • Hydraulic axis clamping • Central lubrication • Coolant system Siegfried Volz Machine Tool Ruffle drinking str. 151-153 D-44143 Dortmund-Wambel

Condition: new, Year of construction: 2026, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW Fedpfx Acegfm Ryowsga 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: good (used), Year of construction: 1993, functionality: fully functional, Table router TF900 - Year of manufacture: 1993 - 380 Volt Fedjygm D Ujpfx Acwega - 3-speed control Transport available at extra cost!

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Fedpfx Aexgqmxscwsga Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one Fgodpfsfg E Hpsx Acwsa high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: ready for operation (used), machine/vehicle number: 80290, Extraction capacity: 5500 m³ / h Negative pressure: 765 - 351 Pa Fgsdjft Siuepfx Acwsa Suction opening: 180 x 220 mm Outlet opening: 300 mm Ø Speed: 1400 rpm Drive motor: 380 V, 5.3 kW Weight: 60 kg Required space: 720 x 680 x 350 mm

Year of construction: 1970, condition: used, engine: 380 V, 5,5 kW space needed: 1200 x 1600 x 3200 mm Fgjdpfx Acs Sxmiowoa weight: 1200 kg

Year of construction: 1970, condition: used, Stand adjustable crosswise by hand: 600 mm Spindle on column manually adjustable in height: 1200 mm hydraulic automatic vertical movement: 900 mm hydraulic automatic transversal movement: 200 mm Fgsdpfx Aceb N Dgmowsa maximum distance between table and spindle support (long spindle): 600 mm drive motor: 380 V, 2800 rpm, 5,5 kW table-Ø: 550 mm space requirement: 1600 x 1200 x 3200 mm Weight approx.: 1.2 t hydraulics: 2,2 kW; space requirement: 800 x 800 x 1200 mm; weight approx.: 300 kg

Year of construction: 2010, condition: good (used), machine/vehicle number: 182245, table mounting size: 500 x 1050 mm movements x/y/z: ca. 800/500/500 mm spindle taper: BT 40 ISA min./max. distance table/spindle: 100/650 mm spindle turning speed range: 8000 rpm number of tool positions: 24 pieces carriages: 5 - 6000 mm/min rapid move: ca. 15 m/min spindle drive: 11/15 kW electrical connection: 400 V, ca. 20 kVA kW space needed: 2450 x 2220 x 2780 mm weight: 5200 kg Delivery time: approx. middle April 2017 Fodpfxjdbh Ude Acwega

Condition: used, functionality: fully functional, machine/vehicle number: H2X396J00939, Year of construction: 2018, operating hours: 14,083 h, load capacity: 8,000 kg, lifting height: 3,670 mm, fuel type: diesel, mast type: simplex, construction height: 3,180 mm, power: 84 kW (114.21 HP), fork carriage width: 2,180 mm, empty load weight: 13,845 kg, total length: 3,350 mm, drive type: Diesel, construction width: 2,180 mm, Diesel forklift Chassis number: H2X396J00939 Fsdjyvauxspfx Acwjga Load center: 900 ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Standard Transmission: Linde Hydrostat Condition: Limited operability Technical condition: Normal Front tires type: Super elastic Front tires size: 8.25-15 Front tires condition: 0 - 20% Rear tires type: Super elastic Rear tires size: 300-15 Rear tires condition: 0 - 20% Description: The unit is sold as-is. The mast shows some play. Common defects and signs of wear are present (hydraulic hoses, bearings, pins, etc.). We offer the forklift in functional condition, but without a UVV (accident prevention regulation) inspection. 3rd valve, half cabin, safety light, rotating beacon.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 2,025 h, load capacity: 8,000 kg, lifting height: 4,855 mm, free lift: 1,530 mm, load center: 900 mm, fuel type: diesel, mast type: triplex, construction height: 3,010 mm, fork carriage width: 2,200 mm, fork length: 2,400 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: NEW, rear tire type: cushion tires (black), rear tire size: NEW, drive type: Diesel, Diesel forklift Load center: 900 mm Fork width: 200 mm Fork thickness: 70 mm ISO class: ISO class 4 = 5,000 – 10,000 kg Mast type: Triplex Fjdpfx Aex E Ekxecwoga Condition: Refurbished, without warranty Technical condition: very good Front tires type: Superelastic Front tires size: factory new Front tires condition: New Rear tires type: Superelastic Rear tires size: factory new Rear tires condition: New Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, road approval (StVZO), full cab, rotating beacon, LED,

Condition: used, Used Kason model K40-2-SS stainless steel 2-deck screen. Screens measures approximately 900mm diameter. Unit has (3) product discharges. Fgjdpfoygvm Sjx Acwoa

Condition: used, all stainless steel speed up to ± 50 strokes / min. mobile with outfeed conveyor belt width 900 mm content of hopper : 530L surface of the dies 870 x 140 mm suitable for dies with a thickness of min. 6 mm and max. 40 mm power 22,8 kW weight 2.200 kg Siemens PLC + HMI Touch (digital readout with possibility of storing recipes) renewed control box with new electrical components and cables hydraulic system fully overhauled, cylinders, pumps, motors, piping, filter,... Fjdjyn Dcqopfx Acwsga this forming machine is ideal for forming all kinds of meat burgers, chicken products such as nuggets, chicken burgers, schnitzels,... fish products : fish nuggets, fish burgers, fish fingers potato and vegetables products, vegetarian products. nuggets (depending on product and diameter): 60.000-80.000 pcs/hr burgers (depending on product and diameter): max. 22.000 pcs/hr completely overhauled new PLC control Barsso/Siemens S7/1200 + HMI TP700

Condition: used, Year of construction: 2022, operating hours: 1 h, machine/vehicle number: G22I970759, fuel type: diesel, motor manufacturer: Cummins QSK23-G3, General information Field of application: Construction Fsdpfsxzap Ssx Acwjga Weights Empty weight: 6.345 kg Functional Generator capacity: 900 kVA CE mark: yes Other information Fuel consumption: 134 L/Hour at 75% Load Prime Generator: Stamford HCI634H1 Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Transport dimensions (LxWxH): 4,32x1,86x2,15 Production country: IN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel = Remarks = Surplus unused 2022 generator set.

Condition: good (used), Year of construction: 2006, control Rexroth Fgedpfxowzmrie Acwoa

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Fgodpfxsxuv Ude Acwea Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, In our opinion, the machine is in good used condition and can be inspected Fgsdpfjx Ik Tksx Acwja under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!