Used Veneer for sale (521)

Condition: new, functionality: fully functional, For repairing and cross-gluing veneers. Damaged or torn veneers are reliably repaired with the simplest handling. Combined veneer strips achieve optimum tear resistance thanks to end cross-gluing. The perfect design fully utilizes the advantages of the KUPER glue thread. The practical construction of the device allows immediate use without extensive training. After an approximate preheating period of 5 minutes using the temperature controller (sold separately), the KHL 1 is always ready for operation. Light pressure is sufficient to efficiently apply the glue thread to the veneer sheet. Smooth operation is ensured by maintenance-free use. Net weight: 1.2 kg including 1 spool of glue thread 1.8 kg with temperature controller Gross weight: 2.5 kg Standard accessories 1 test spool of original KUPER glue thread type K 3, Dcsdpfx Asxdxk Hsmnsi 10 threaders, 1 operating manual, item no. 51204 Item No. 0132771

Condition: new, input voltage: 400 V, input frequency: 50 Hz, For joining veneers with thicknesses ranging from approximately 0.3 to 3.0 mm. The machine uses a special glue thread, which is applied in a zigzag line over the joint. High adhesion and tensile strength ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is embedded internally, thus eliminating the need for sanding the adhesive medium. Specific features: Dodjxdxccjpfx Amnsci * Torsion-resistant C-frame design made of steel * Stainless steel worktable * Standard heating system * SP control system * Pneumatically regulated adhesive pressure * Disc wheel system with tolerance compensation for various veneer thicknesses * Adjustable heating performance for both idle and processing modes * Tool-free adjustment of the adhesive pressure roller * Fully automatic start/stop function via photoelectric sensor Technical data: Throat depth: 1250 mm Feed: 4 speeds, approx. 15, 30, 45, 60 m/min Veneer thickness: approx. 0.3 – 3.0 mm Operating voltage: 400 V, 50 Hz, 3 phase Compressed air connection: R 1/4'' Compressed air consumption: approx. 7 NL/min Total connected load: approx. 3.1 kVA Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg release agent 105661 1 set of tools, 1 operating manual Glue thread offers available upon request! Art. No. 0149650

Condition: new, functionality: fully functional, - Device for unrolling and moistening joint paper; including operating manual - for use with joint paper up to 20 mm wide Required joint paper available on request! Dsdexd Sldopfx Amnjci

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, OUR BESTSELLER – 1000 mm Throat Depth Veneer splicing machine for gluing veneer strips including glue application unit with nearly horizontal glue application disc. Perfect in combination with glue cooling system (optional). NEW INDUSTRY 4.0 All essential machine and performance parameters are recorded, transmitted and made available centrally for analysis (optional). Additional modules for monitoring power and compressed air consumption available (optional). Dcodpfx Aexdxktemnoi SPECIFIC FEATURES - Innovative veneer feeding system with disc wheels and tolerance compensation mechanism for jointing without offset - Low-maintenance, energy-saving, and veneer-friendly high-performance plastic chains (excellent sliding properties, minimal heat conduction, and no discoloration) - 12 mm slim, chrome-plated heating rails ensure minimal stress on veneer due to shrinking, and significantly reduced energy consumption - Intelligent automatic energy management for standby and operating mode - Intuitive control panel with all key functions at a glance, parameter memory TECHNICAL DATA* Throat depth: 1,000 mm Veneer thickness: approx. 0.35 – 2.5 mm, optionally from approx. 0.25 mm, optionally up to approx. 5.0 mm Veneer lengths: from approx. 300 mm Veneer width: from approx. 35 mm Feed speed: steplessly adjustable from 12 – 55 m/min Operating voltage: 400 V, 50 Hz, 3 Ph + N + PE Total connected load: 4.1 kVA Air consumption: approx. 5 NL/min at 6 bar *Subject to material testing, depending on wood species and micro or thick veneer package (option) only without micro and thick veneer package (option) GLUES Suitable for urea resin adhesive Glue offer available on request! Item No. 0164700

Condition: good (used), Year of construction: 1982, still well-preserved veneer saw with planer unit Dodpfeyizztex Amneci max. cutting length 3050 mm no rear stop included

Condition: excellent (used), Shelf length: 2500 mm Dsdpfoy Syanjx Amnoci Shelf width: 1300 mm 4 hydraulic cylinders Clearance: 450 mm Press – water-cooled Safety shear pin

Condition: refurbished (used), Year of construction: 1983, machine/vehicle number: 3/1406, functionality: fully functional, table width: 1,300 mm, table length: 2,500 mm, Veneer press, Joh. Langzauner & Sons ----- Technical data ----- Dsdoy Twrkjpfx Amnjci Pressing area: 2,550 mm x 1,300 mm, Power per heating plate: 7,200 W, Number of cylinders: 4 pcs.

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, number of cylinders: 10, working width: 1,400 mm, cylinder diameter: 85 mm, working length: 4,000 mm, TECHNICAL DETAILS Max. working length: 4,000 mm Max. working width: 1,400 mm Number of press cylinders: 10 Cylinder diameter: 85 mm MACHINE DETAILS Heating system: Oil EQUIPMENT System with pre-feed conveyor belt System with outfeed table Safety standard: CE marking Dedpsyqybhefx Amnjci The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8212

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 2,400 mm, space requirement length: 9,000 mm, working width: 1,600 mm, Crosswise Veneer Splicing Machine / Cross Splicing Machine Manufacturer: Kuper Model: ACR CrossRunner 1600 Year of manufacture: 2007 Dcjdpfxoyayumj Amnei Narrow cross splicing machines for pre-glued veneer strips with a small working width. The machine operates significantly faster in cross-feed mode compared to longitudinal machines and is thus an economical alternative, for example, for cross-veneered interior doors or smaller furniture parts. Working width: 1600 mm (along the grain) Veneer strip width: from approx. 60 mm Veneer thickness: approx. 0.3 - 2.5 mm Feed speed: approx. 30 m/min Suitable glues: PVAc or urea glue With automatic stacking Control: Siemens Simatic with touch display Voltage: 400 V, 50 Hz, 3 Ph Rated current: 16 A Overall dimensions (W x L): approx. 2400 x 9000 mm

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Dsdpfx Ajt Akcfjmneci Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg

Condition: used, Year of construction: 1990, No. 04502 Veneer press Ott JU 2511/70 Used, year of construction 1990 Electro-hydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm LW Heating electric 4 hydraulic cylinders each 80 mm diameter Total pressing pressure 70 tons Specific pressing pressure 2.5 - 3.5 kg/cm2 Opening width 400 mm Button control for opening - closing - stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Dcodpexwp S Iefx Amnsi Safety rip cord Incl. electric cable and plug 32 A Incl. electric plans, operating instructions as .pdf file Transport dimensions approx. 2900 x 1400 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2015, functionality: fully functional, Machines connected in one line (all three machines are only sold together): 1. Veneer cross-jointing machine FURNIMASTER FZR-21 2. Direct unloading device DA-12R 3. Scissor lift INCLUDED Veneer specifications Veneer strip length (grain direction) 350 - 2100 mm Veneer strip width (cross grain) 50 - 500 mm Veneer strip thickness 0,3 - 1,5 mm Power data Maximum nominal output / machine cycles 30 cycles/min. Average production speed 17 - 20 cycles/min. Connection data (Basic machine) Connection power 9 kW Compressed air 6 bar Power consumption Electric energy 6,2 kWh Compressed air 15 NL/min. Dimensions and weight (Basic machine) Dsdpfx Amjy Tpb Rsnsci Length 3500 mm Width 1500 mm Height 1530 mm Working table height 930 mm (+50/-0 mm) Net weight, approx. 2500 kg

Condition: used, Year of construction: 2009, functionality: fully functional, Veneer splitting machine FANNINGMASTER 515 for sale! Roller conveyor INCLUDED Veneer specifications Veneer strip width (cross grain) 45 - 515 mm Veneer strip length (grain direction) 400 - 4000 mm Veneer strip thickness (depending on quality of veneer) 0,3 - 1,5 mm Djdpfx Asy Tngxsmnjci Veneer package height 10 - 40 mm Machine capacity Throughput speed approx. 30 m/min. Machine specifications Electric energy 1,2 kW Compressed air 6 bar Power consumption Compressed air consumption 5 NL/min. Dimensions / weight Measurements Length 2360 mm Width 1570 mm Height 1750 mm Net weight, approx. 1150 kg Working table height 900 mm

Condition: used, Year of construction: 2006, functionality: fully functional, CUTMASTER Fisher + Rückle AFD-35/2600 is an industrial, heavy-duty double-blade longitudinal veneer guillotine. Tech. data Cutting length 2.600 mm Length of cross-cut 1.477 mm Dcsdpfx Amsy Tm Tkenei Cutting height 100 mm Strip width min 20 mm Double-blade Rip fence Yes Pressure beam pneumatic Blade drive pneumatic Weight 3.800 kg CE marking Total connection 10 kW

Condition: used, used, good condition Manufacturer Joos Model HP65/2 1 level Plate size approx. 2500 x 110 mm Opening width approx. 360 mm Side guide Electric heating Aluminium plates Piston diameter 80 mm 4 lower pistons Space requirement approx. 2900 x 1300 x 1900 mm Weight approx. 3200 kg Total connected load 15.4 kW Storage location 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition, without warranty or guarantee Dodpfjyu U Evox Amneci

Condition: used, used, in good condition Manufacturer: Joos Model: HP65/2 Machine no.: 79/9 510 1 deck Cover plates - natural aluminum GS tested Panel size: 2500 x 1100 mm Opening width approx. 360 mm Tip control Safety device: foot rail - shutdown Side guide Electric heating Piston diameter: 80 mm Lower pistons: 4 units Space requirement approx. 2900 x 1300 x 1900 mm Weight approx. 3200 kg Dcsdpfxsyu U D Se Amnsi Total connected load 15.4 kW Stock location: 97447 Gerolzhofen, loaded free, unpacked Delivery in current condition as inspected, without guarantee or warranty

Condition: used, Year of construction: 2013, functionality: fully functional, Fisher+Rueckle FZR-24 Veneer cross-gluing machine, year 2013 for sale! Veneer strip length 400-1100 double lane/ 350-2100 mm single lane Veneer strip width 50-500 mm Veneer strip thickness 0.3-1.5 mm Max nominal output /machine cycles 30 cycles/min Dodpfx Ajumrf Asmneci Average production speed 17-20 cycles/min Effective length of heating zone 2478 mm Connection power 22 kW Compressed air 6 bar Glue types PVA or UREA based

Condition: used, Year of construction: 1985, from schoolused, great condition, little usedMake MayerType FSKYear of construction 1985Machine no. 7936GS testedEngine 1.8kWCutting length 3000 mmSaw blade diameter approx. 180 mmpneumatic tensionrear support tableWeight about 800 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Dodpevwf Agefx Amnoci

Condition: not inspected (used), functionality: unexamined, 5 kW 20 press cylinders 3 press cylinders individually with foot valve Each set of 5 cylinders individually disconnectable with hand valve Assembly machine - cutting length: 9300 mm Dodpfx Aox Hiqrjmneci Total height: 2100 mm Pressing height: 1300 mm Extraction port: 120 mm

Condition: not inspected (used), Year of construction: 1975, Power connection: 400V, 13kW 2 heating plates, each measuring 1200 x 2250 mm Heating plates controlled by 2 thermostats Pressing pressure: 250 bar Dimensions (L x W x H): 2590 x 1330 x 1950 mm Dedpskkflbefx Amnsci Weight: approximately 2800 kg Press stroke: 380 mm

Condition: reconditioned (used), functionality: fully functional, power: 9 kW (12.24 HP), Ott veneer press Dsdpfxotwp Iws Amnjci connected load 380V 9kW Panel size 2250 x 1350 mm Elkom heating plates, gold anodized Plates and hydraulics in order

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 081263, Connection value: 380V, 1.85kW, 4.8A Dedpfx Amjh U Dbronsci Length of pressure bar: 3100 mm Pneumatic material clamping with manual lever valve Chassis Stop guide, 520 mm long 6x support brackets

Condition: used, Year of construction: 1987, used, top condition, low hours Manufacturer Bürkle / Joos HP 60 Completely overhauled by Joos in 1987, safety interlock Model S60/250/130 Year of manufacture 1987 Machine no. 63/310777 1 deck Plate size: 2500 x 1300 mm Opening height: 290 mm Tip control Safety cable underneath Electric heating Max. specific pressing pressure 2.5 kg/cm² Bonded aluminium plates Piston diameter: 60 mm Bottom piston & piece Space requirement approx. 3000 x 1500 x 1800 mm Weight approx. 3000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as inspected, in current condition, Dcedpoythdpefx Amnsi without warranty or guarantee

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 2911, Depth: 920 mm Feed rate: approx. 20 m/min Dcjdpfx Aey Iadlomnsi Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg

Year of construction: 1999, condition: ready for operation (used), A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible. Dcjdpfx Amjw I E Dvonei