Used Veneer Press Prints for sale (28,961)

Condition: used, Year of construction: 1984, Special pressing size, large pressing depth 1600 mm Pressing length 2750 mm Plate size 2750 mm x 1600 mm - 2.75 x 1.60 m - with 3 heating plates 2 levels Phedev Hhudepfx Aa Eja incl. control system – newly retrofitted retrofitted Used, in good condition Manufacturer: Ott Model 300 K 135 Year of manufacture: 1984 Machine number: 13741 Number of levels: 2 pieces Cover sheets hard-anodized Plate size approx. 2750 mm x 1600 mm Opening width approx. 185 mm Tip control Safety cable below Side guidance Electrical heating Specific pressing pressure max. 5.5 Piston diameter 90 mm Lower pistons: 6 units Original price approx. €40,000 Space required approx. 3600 mm x 1600 mm x 2000 mm Total connected load 49 kW Storage location: 97447 Gerolzhofen, loaded free, unpacked Delivery in the current as-inspected condition, without warranty or guarantee

Condition: excellent (used), Year of construction: 2008, I sell the press for veneer and foil ORMA NPC 6/90 AS-BO. Product size max. 2500 x 1300mm Oil heating. Total power 20,5 KW at maximum. Pedpfx Aasu E E A To Eeha Very good condition. Available immediately.

Condition: good (used), functionality: fully functional, heating capacity: 14 kW (19.03 HP), Machine types: U 60 Machine no: 78/3103137 Power: 3/380V/50Hz Total power 14 Kw Press area: 2200X1250X400mm Pedpfswb Skkox Aa Esha

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Total pressing force at 320 atü: 80 tons Pressing cylinder: 6 pistons Motor power: 1.1 kW Heating-up time approx. 20 min. Pjdpfx Aaswx Rrnj Ejha Price ex works.

Condition: excellent (used), Shelf length 250 cm Width 130 cm Four hydraulic cylinders Phsdpfx Asxgnp Dea Eoa For water

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Phedpfxsv Sthge Aa Eoa Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, with new Mylar film used, in good condition Brand: Joos Year of manufacture: 1981 Machine no.: 81/10621 1 level GS certified Plate size approx. 2550 mm x 1350 mm Opening width approx. 400 mm Tip control Swivel control panel Lower safety bar Side guide Electric heating Max. pressing force 90 t Phodpeww Nd Hsfx Aa Esa Aluminium plates Piston diameter 80 mm Required space approx. 3000 mm x 1600 mm x 2100 mm Weight approx. 3000 kg Total connected heating load 20 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: like new (used), Shelf length: 3000 mm Psdpfxsxlgzpe Aa Eoha Shelf width: 1300 mm Number of pistons: 6 Water heating Weight: 4300 kg

Condition: as good as new (ex-display), Year of construction: 2021, total width: 1,618 mm, total length: 1,830 mm, total height: 2,400 mm, overall weight: 5,000 kg, type of input current: three-phase, input current: 81 A, input frequency: 60 Hz, opening width: 100 mm, operating temperature: 140 °C, cylinder diameter: 65 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN Psdpfxet Eq E Se Aa Esha 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: ready for operation (used), Hot press Plan size 2500 x 1300 mm Psdewbwixspfx Aa Eoha 1 intermediate plan 4 pistons

Condition: ready for operation (used), Shelf length 250 cm Shelf width 110 cm Clearance 40 cm Motor 1.1 kW 4 hydraulic cylinders Phedpfxswx H Hbo Aa Eea

Condition: ready for operation (used), Steinemann Veneer Press Press size 2750 x 1350 mm Opening width 600 mm. Please note: The press must be recessed 200 mm into the floor or placed on 200 mm feet. Electric heating plates 16.8 kW Press force 90 tons Specific pressure 3 kg/cm² Cylinders 6 x 80 mm Pjdpfxov Uqrbo Aa Ejha Weight approx. 4800 kg Space required 3700 x 1400 x 2100 plus 200 mm at the bottom Price 6000.- Condition: Ready for use

Condition: used, used Manufacturer Joos Machine no. 790 1 level Plate size approx. 2200 mm x 1100 mm Opening width approx. 280 mm Aluminum plates Piston diameter 80 mm Space requirement approx. 2800 mm x 1300 mm x 1850 mm Pedpfx Aaewrtlqj Esha Weight approx. 3000 kg Total connected load 13.2 kW heating power Storage location 97447 Gerolzhofen, free loaded, unpacked Handover in as-is condition as inspected, without guarantee and warranty

Condition: excellent (used), functionality: fully functional, Shelf length 3000 mm Shelf width 1300 mm Number of pistons 6 Clearance - 470 mm Water heating Pjdpfxswl Eb De Aa Eoha Pneumatic side pressure Piston diameter - 80 mm Safety switch tear-off

Condition: excellent (used), Technical specifications: Number of pistons: 6 Psdpew U Nvpofx Aa Eoha Piston diameter: 140 mm Connection to central heating Shelf dimensions: 3500x1300 mm Clearance: 120 mm Hydraulic pressing Motor power: 5.5 kW Power supply: 380 V Overall dimensions: Length: 4600 mm Width: 1320 mm Height: 2800 mm

Condition: used, Hydraulic press for hot/cold cycle processing of wood, composite materials, plastics, and various other materials Technical data: Platen size: 2,500 x 1,300 mm No. of platens: 3 solid steel platens, fully drilled, thickness 38/40 mm – covered with aluminum Phsdpfx Aajwzyizj Esa No. of chambers: 4 No. of intermediate platens: 3 Cylinder stroke: 450 mm Chamber opening height: 90 mm Platen movement: from bottom to top Maximum working temperature: 120° Platen heating by water or steam Total pressing force: 120 tons Specific pressure on 80% of the area: 3.3 kg/cm² No. of pressing pistons: 8, diameter 70 mm Hydraulic unit power: 4 HP Timer for timed opening Overall dimensions: 3,700 x 1,300 mm Weight: approx. 8,000 kg

Condition: excellent (used), functionality: fully functional, overall weight: 5,500 kg, Equipment: hot water, shelf length: 3500 mm Psdpsxlcthofx Aa Ejha shelf width: 1300 mm number of pistons: 10 piston diameter: 85 mm water heating

Condition: excellent (used), Year of construction: 2000, plate length 3000mm plate width 1300mm oil heating with electric heater 6 hydraulic pistons pistons diameter 85mm plates span 650mm pressure 3kg/cm2 pump motor power 2,2kW Pjdpfx Aspvk Tgsa Esha

Condition: excellent (used), functionality: fully functional, Thread splicer with glue Zigzag stitching Pjdpfx Ajxdw Azea Ejha Heater with air blowing Pedal control 380V power supply

Condition: like new (used), Year of construction: 2004, working width 2700 mm working height 100 mm Pedpfxexcn Dts Aa Eoha hydraulic cutting gauge adjustment to size cast body power supply 400V 3000 kg Year of manufacture 2004

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 3,600 kg, shelf length: 3000mm shelf width: 1300mm clearance: 400mm 6 hydraulic cylinders Piston diameter 85 mm Machine control from the touch panel Built-in electric oil heating Electric time opening Safety break Year of production 2025 NEW Logic control system Overall dimensions: length: 360 cm width: 160 cm height: 203 cm Phodowfrudopfx Aa Esa

Condition: like new (used), Shelf length 3500 mm Phedowtz Ucopfx Aa Eea Shelf width 1300 mm New aluminium shelves 6 hydraulic cylinders Piston diameter 70 mm Water heating Ground clearance 390 mm Safety rupture link Year 1999 Weight 4400 kg

Condition: excellent (used), functionality: fully functional, Shelf length 3500 mm Shelf width 1300 mm Number of pistons 8 Clearance - 430 mm Oil heating - built-in heater Piston diameter - 85 mm Safety switch - breakaway Pjdpfx Aewl Edlea Ejha Weight - 4600 kg

Condition: like new (used), Shelf length: 3500 mm Phedjwhwrgjpfx Aa Eoa Shelf width: 1300 mm Clearance: 390 mm Number of pistons: 6 Piston diameter: 80 mm Water heating Emergency stop with pull switch New Teflon foils on the plates Machine dimensions: Length: 410 cm Width: 160 cm Height: 200 cm

Condition: excellent (used), functionality: fully functional, overall weight: 10,600 kg, Shelf length 3700mm Shelf width 1300mm Water heating 10 hydraulic cylinders Piston diameter 100mm Pjdpswhduzofx Aa Esha Clearance between shelves 260mm Weight - 10600kg Maximum pressure 200 BAR Ability to work on 6 or 10 pistons Possibility of dismantling the middle shelf (Clearance 570mm)