Used Veneer Guillotine for sale (1,407)

Year of construction: 1980, condition: ready for operation (used), Cutting length: 2520 mm, cutting thickness: 4 mm, voltage: 380 V, power connection: 16 A. The blades of the shears are likely no longer able to be sharpened due to wear and tear and would need to be replaced. On-site inspection is possible. Bodpfjxz Ewusx Aa Uocw

Year of construction: 1999, condition: ready for operation (used), A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible. Bodpfew I E Dvjx Aa Uscw

Condition: good (used), Perfecta 132 TS Paper Cutting Guillotine The machine is in very good condition and ready for production. Manufactured in 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Perfecta premium cutting machines are manufactured in Bautzen, Germany. Bcedpoymxm Iefx Aa Usw Perfecta Machine Features: – Interactive User Interface – 18.4” Touchscreen – USB Interface – CIP Data Module – Positioning via Electronic Handwheel – Programmable Holding Pressure – Automated Knife Change from the Front – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1320 mm Maximum Stack Height: 165 mm Infeed Depth: 1325 mm Minimum Cutting Capacity with Sheet Metal Under the Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under the Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Knife Capacity: 44 Cycles/Min Saddle Guidance: Over the Work Table Power Main motor: 4.5 kW Net weight: 3410 kg The machine includes a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: good (used), Perfecta 76 UC Paper Cutting Guillotine This machine is in very good condition. It has been in one hand since new. Technical specifications: Cutting width: 760mm Stack height: 110mm Weight: 1650kg Power supply: 400V Equipment: – LCD programmer – photocells – air table – cutting line Bcjdjymxmzepfx Aa Uew – hydraulic clamp with variable force adjustment – manual – tool kit – clamp plate – spare blade

Condition: good (used), Polar Mohr 78 X Paper Cutting Guillotine Machine has been serviced and is ready to use, in perfect condition. Manufactured in 2008. Technical specifications: Cutting width: 780mm Stack height: 120mm 15″ LCD display 400V power supply Weight: 1400kg Side tables Bedeymxl Ropfx Aa Uecw Chrome table surface Table lighting and optical cutting line Continuously adjustable pressure Additional rear table covers. Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), IDEAL EBA 5560 Hydraulic Guillotine A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, intuitive and simple to operate, yet with the performance of a large industrial machine. The machine was used in an office and is the latest product from the German manufacturer Ideal. Control: 99 programs, each with 99 steps Data entry via LCD touchscreen Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Switching mm/inch Hydraulic knife and pressure beam drive Photocells Side tables Cutting line Technical data: Cutting length: 550 mm Infeed height: 95/92 mm – with under-beam bar Infeed depth: 570 mm Front table depth: 460 mm Minimum final cut: 32/60 mm – with under-beam bar Power supply: 230 V / 50 Hz Bsdpfx Aaoymxlks Uscw Power: 1.5 kW Weight: 369 kg Dimensions: 1520 x 1400 x 1370 mm

Condition: good (used), functionality: fully functional, Year of construction: 1994, Sheet width: 4000 mm Sheet thickness: 6 mm Upright distance: 4010 mm Machine weight approx.: 7,500 kg Total power: 16 kW Bodeyfd Nljpfx Aa Uscw Back gauge: 700

Condition: used, Year of construction: 1991, Cutting length 3100 mm Bodpfx Aaer I E Hcj Uecw Cutting height 45 mm Motor output 1,8 kW dimensions 4000 x 500 x 920 mm weight 450 kg

Condition: good (used), Year of construction: 2000, total width: 4,000 mm, total length: 4,000 mm, total height: 3,200 mm, overall weight: 43,000 kg, type of input current: three-phase, temperature: 160 °C, pressing force: 500 t, continuous press with mylar belt dimensions: 2700 x 3200 mm Bcjdpfx Aasycxvuj Uow

Condition: good (used), functionality: fully functional, Year of construction: 2013, actuation type: electric, working width: 3,050 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 10 1/min, stroke rate (max.): 47 1/min, sheet thickness (max.): 3 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 650 mm, power: 11 kW (14.96 HP), input voltage: 400 V, overall weight: 2,500 kg, total length: 3,800 mm, total width: 1,650 mm, total height: 1,650 mm, number of support arms: 3, Equipment: angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Digital display Bodpoyhfplofx Aa Ujcw

Condition: good (used), Wohlenberg 92 Paper Guillotine The device is in perfect condition, very low mileage. An unusual machine on the market. This is the newest model, currently in production. In one hands from new. Under a service contract until the very end. Year of production 2011. Technical data: Cutting width: 920 mm Stack height: 120 mm Weight: 2000 kg Power supply: 400 V Equipment: – programmer with 19” touch screen monitor – CIP-3 and CIP-4 operation, visualization of cutting on the monitor – memory expansion via USB, possibility of connecting the machine to the network – photocells – air table – cutting line – chrome table surface – rear saddle control on a servo motor – super fast work, always stops at „0” – hydraulic clamp with smooth force regulation Bodjymmzyopfx Aa Uocw – user manual – set of tools – sheet metal for clamp – tapping block – spare knife

Condition: as good as new (ex-display), The KMT RNC 2004 is a powerful and precise Guillotine Shear designed for superior performance in the Sheet Metal Processing category. Built with a robust solid steel weldment, this advanced plate shearing machine incorporates premium features such as an NC-controlled back gauge and a sliding-block guided cutter bar to ensure clean cuts with minimal torsion. The innovative "Return-to-Sender" function not only enhances process efficiency, making it easier to handle large plate sections, but also ensures operator safety. With a working length of 2.060 mm and a maximum plate thickness of 4 mm for materials up to 450 N/mm², the KMT RNC 2004 is especially suited for machining stainless steel plates using reversible cutters that boast multiple cutting edges. Additionally, the ergonomic design, bright LED cut-line illumination, and accessible maintenance features make this machine a user-friendly choice. Experience the efficiency of the KMT RNC 2004 and step up your Guillotine Shear operations by ordering now. Bsdpfxjww T Tfj Aa Uocw

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Cutting thickness: 6.35 mm Backgauge: 770 mm Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Bedpfx Aajtvb Iuj Ujcw Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal

Condition: used, guillotine scissors cutting blades, replacement blades for guillotine scissors, replacement blades, cutting blades, scissor blades -Cutting knife. Replacement blades for table shears, 2 pieces Bcjdpfx Aasn Nbnqe Uew -Cutting length: 2550 mm -Hole spacing: 125/200 mm / Ø10 mm see photos -Price/tax: complete -Total weight: 40 kg

Condition: good (used), Stop for press brake, bending machine, guillotine shears... Bedpfsxf Dmcsx Aa Ujcw -Stop bar: from Atlantic ATS 3006 guillotine shear, without drive motor -Stop length: 2670 mm -Travel: 800 mm -Accessories: see photos -Transport dimensions: 2670/1050/H320 mm -Weight 186 kg

Condition: good (used), Year of construction: 1962, guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears -mechanical guillotine shears -Cutting width: 2040 mm -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm Bcsdpfx Aodzd Husa Usw -Weight: 1378 kg

Condition: used, Stop for press brake, bending machine, guillotine shears ..., clamping angle, clamping aid,.Support rail for press brake, bending machine, guillotine shears, stop rail, clamping rail -Manufacturer: RAS, support rails from guillotine shears type RAS 53.60 -Dimensions: 805/100/H80 mm / groove width 16 mm 3 pieces -Dimensions: 720/75/H85 mm with stop rail 1 piece -Delivery/Price: complete -Transport dimensions: 805/350/H80 mm -Weight 34.8 kg Bcsdpfet Rl Ulsx Aa Ujw

Condition: used, Replacement knife for table shears, replacement blades, cutting knives, shear knives -Number: 2x knives available -Angle honed: 90° -Dimensions: 20 x 80 mm Bodpocn Shqofx Aa Uecw -Lengths: 2x 2397 mm -Hole spacing from: 73/125/200/200/200/200/200/200/200/200/200/200/200/125/73 mm -Threaded hole -Price: complete -Weight: 56 kg

Condition: used, Replacement knife for table shears, replacement blades, cutting knives, shear knives -Dimensions: 79 x 19 mm -Lengths: 2x 1055 mm -Hole spacing: 50/238 mm Bcedpfx Aaoctyq Ao Uow -Bore: 17 mm countersunk -Price: complete -Weight: 24 kg

Condition: good (used), Guillotine scissors, guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, lever shears, lever guillotine shears, hand guillotine shears -Guillotine scissors: hand guillotine scissors, solid design Bcjdpfx Aaemch T Ej Ujw -Cutting width: 1030 mm -Max. Section thickness: approx. 2.0 mm -Fence depth: 550 mm, fence with removable rail -Dimension: 2250/870/H1295 mm -Transport dimension: 1670/870/H1110 mm -Weight: 414 kg

Condition: good (used), Plate shears cutting blades, replacement blades for plate shears, replacement cutting edges, cutting blades, shear blades -Cutting blades. Replacement blades for Atlantic ATS 3006 guillotine shears, 2 pieces -Cutting length: 3120 mm -Hole spacing: 195 mm / M14 see photos -Dimensions: 49/19/3120 mm / 49/19.4/3120 mm -Price/Delivery: complete -Transport dimensions: 3200/120/H190 mm -Total weight: 57 kg Bcedpfoxf Dpksx Aa Uew

Condition: good (used), Guillotine scissors, guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, lever shears, lever guillotine shears, hand guillotine -guillotine scissors: hand guillotine cutting width: 1060 mm Bcedpfx Aaeiwuyrj Uew -Type: unfortunately without type designation/cutting data -Cutting width: 1070 mm -Max. Section thickness: mm -Stop depth: 435 mm -Total dimensions: 1760/890/H900 mm -Weight: approx. 161 kg

Condition: used, Table shear cutting knife, replacement knife for table shear, replacement cutting, cutting knife, shear knife -Spare knife: for guillotine shears, from stock for guillotine shears Fischer DHS 12/3000 -Quantity: 4 pieces available Bcsdpfx Aajharuls Usw -Lengths: 2x 2650/100/25 mm / 2x 450/100/25 mm -Hole spacing: 200/250 mm, see photos -Accessories: incl. Box with fastening screws -Price: complete -Weight: 126 kg

Year of construction: 1970, condition: used, Hand guillotine shears, guillotine shears, sheet metal shears, sheet metal shears, folding machine, edging bench Bcsdpsd E R R Sofx Aa Uow -Hand guillotine shears combined with: folding machine -Cutting width: 610 mm -Max. Section thickness: 1.0 mm -Swivel bending machine -Max. Working width: 610 mm -Max. Sheet thickness: 1.0 mm -Transport dimensions: 845/910/H1230 mm -Weight: 240 kg

Condition: used, Veneer saw, veneer saw machine, jointing machine, fine cutting machine, fine cutting circular saw, Veneer saw drive motor Bcjdpsh Elztefx Aa Uow -Veneer saw: SF Scheer drive motor EM 21 -Drive: 1.6 kW 2820 rpm -Dimensions: 265/270/H255 mm -Weight: 24 kg