Used Uv Dryer for sale (2,654)

Condition: used, Year of construction: 2014, Overview  The Gesete XT 500 bottle drying system was manufactured in 2014 and is designed for drying bottles upstream of a labeling machine (Etima). It removes residual moisture to ensure good label adhesion. Technical details Manufacturer: Gesete Model: XT 500 Year of manufacture: 2014 Application: Bottle drying before labeling (Etima) Iajdpew N Nkpjfx Afnen

Condition: used, Year of construction: 2012, Overview This industrial air dryer was manufactured in 2012 by the Swedish company Atlas Copco. The FD760 VSD model is a refrigeration-type dryer designed for continuous operation in compressed air systems up to 14 bar, with a maximum flow capacity of 760 L/s. The unit is still installed and connected, has been regularly maintained, with the latest maintenance completed in August 2025, and is in excellent operating condition. It is immediately available and can be inspected on site. Technical data  Application: Air dryer for 7 7-bar low-pressure compressor Flow Capacity: 760 L/s Operating Pressure: Up to 14 bar Power Supply: 5.6 kW Refrigerant: R410A Weight: 380 kg Isdpfsxrnn Dex Afnean

Year of construction: 2019, condition: as good as new (ex-display), 100l dryer for submerged arc flux. 0-400 degree with electronic control Iodpfx Ajm Dr Szjfnsan

Condition: like new (used), functionality: fully functional, Krebeck drying tunnel whit buffert conveyor. Regulated speed on both conveyors and hot air drying fan attached. wet fruits can be pre-dryed before subsequent processing e.g. on a package line. Contamination, leaves and stalkes get filtered out at the same time. Three power levels are available. The temperature gets digitally displayed. Iasdpfx Asyityhefnjn Outfeed hight 150 cm Indeed hight 90 cm Belt width 50 cm

Year of construction: 2017, condition: refurbished (used), Dryer conveyor for digital direct-to-garment (DTG) printing: Asso 600 by Chiossi & Cavazzuti Hot air dryer for DTG printing good condition. Double belt conveyor. Year 2017. Textile oven almost new, overhauled and cleaned. Sold new for just over €12,000. Iedpfsyh Rgyex Afnjan Delivery not included - On request Characteristics of the Chiossi & Cavazzuti ASSO 600 drying tunnel: - MAX POWER: 9,5 KW - FIELD OF APPLICATION: Textile digital printing, pre-treatment drying for dark and light textiles, water-based digital ink drying. - DRYING SYSTEM: Warm air circulation - DRYING SURFACE: 2000 x 600 mm - MAX PRODUCTION: 180 pieces/h Possibility of offering a complete set with a DTG Brother, Epson, Kornit printer and a Schulze PretreatMaker IV pretreatment machine depending on availability. Electric Modular Dryer Forced Hot Air System Drying Area: 2000x600 mm Specifically designed to cure and dry digital printing on fabrics, the massive advantage of these dryers is the high volume of forced air circulation: this facilitates and accelerates the evaporation of water-based digital inks with unmatched results on the finished garment in medium-long drying process.

Year of construction: 2005, condition: ready for operation (used), The CKT 300 dry air dryer from Koch is available for sale as of 05/26. The customer is still using the unit. However, it is possible to inspect the machine on site. Iedpfx Aoyh I U Uofnean

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, The CKT 110 dry air dryer from Koch will be available for sale from 05/26. The customer is still using the unit and it can be inspected on site. The vacuum loader is NOT for sale. The device has been serviced regularly by Koch, as evidenced by the inspection stamp! CKT 110 Dry air output: 110 m³/h Power: 10 kW Iaedpfoyh I S Hjx Afnjn

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, overall weight: 9,000 kg, table length: 825 mm, table width: 625 mm, controller model: 21i MB, Travelling Bridge CNC Vertical Machining Centre Table size (2) 825 x 625 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Iaodpfx Asx Tud Rofnjn Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2016, EFI Vutek GS2000Lx Pro - Ultradrop Colour configuration: 4 colours + white Manuf. Year: 2016 Mileage: 150.00m² RIP: NA In production Availability: January 2026 Demo possible Transport and installation in Europe available upon request The EFI VUTEk GS2000LX Pro with UltraDrop Technology is a hybrid flatbed/roll-fed superwide inkjet printer featuring native 7 pL print heads for high-definition quality, LED curing technology, and a maximum print speed of up to 2,000 ft²/hr. It supports both rigid and flexible media up to 80 inches (2 m) wide. Key Specifications Print Technology LED UV-curing, grayscale 7 pL UltraDrop Technology print heads Max. Print Resolution True 600 or 1000 dpi (selectable) Max. Print Speed Up to 2,000 ft²/hr (186 m²/hr) in Fast-4 mode Color Capability 8 colors plus white ink printing (optional clear varnish channel) Max. Media Width 80 in. (2 m) Max. Media Thickness 2 in. (5.08 cm) Media Types Flexible and rigid substrates Iaodpjx Tuyfofx Afnon Ink Type Genuine EFI UV Inks supplied in 5.0-liter containers Automation Single-pass, multilayer print capability; continuous print with less than five seconds between boards Dimensions (WxHxD) 202" x 66" x 63" (without tables) Machine Weight 5,050 lbs. (2,291 kg) Features and Benefits UltraDrop Technology: Offers smaller drop sizes (native 7 pL) and more precise control with true multidrop addressability for outstanding smoothness in shadows, gradients, and transitions, as well as superb four-point text quality. LED Curing: "Cool cure" LED technology extends the range of supported substrates (including heat-sensitive media), increases uptime with instant on/off lamps, and drives down operating costs and energy consumption. Workflow Integration: Optimized for use with the EFI Fiery proServer with Fiery XF production DFE and color management workflow, allowing seamless integration with EFI Web-to-Print and MIS/ERP solutions. Environmental Benefits: The LED system provides a greener printing solution with lower power consumption, fewer consumable parts, less waste, and low VOCs compared to conventional mercury arc lamps.

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, type of input current: AC, laser power: 6 W, type of cooling: air, total width: 920 mm, total height: 1,760 mm, total length: 940 mm, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, travel distance Z-axis: 500 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 355 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, UV Fiber Laser 355 nm, 6 W – NEW, SK LASER KOLLTRONIC with Workstation, Made in Germany Laser Source IPG – Made in Germany Laser Safety Class 1 Workstation: - Combined sit/stand workstation with ergonomic legroom - Fully enclosed aluminum profile construction - Front door with laser protection glass for clear visibility - Bright workspace lighting - Dimensions: H 1760 × W 920 × D 940 mm - Work platform: Stainless steel plate with 25 mm hole grid (710 × 400 mm) - Rear service door, screwed for easy part loading - Motorized Z-axis: travel distance 500 mm (focus depending on lens) - Extraction nozzle DN50 (extraction optional) - Safety (PL4) - Emergency stop - Interlock with 2 standard relays - Safety relay for door monitoring UV Fiber Laser: - Wavelength: 355 nm - Power: 6 W 40 kHz - Pulse energy: 20 µJ - Pulse frequency: 10–300 kHz - Air cooled - Pilot laser red light + 2 distance lasers for focus adjustment (Laser class 2) - Laser head manually adjustable in Y-axis Scanner & Optics - F-Theta lens F = 160 mm, anti-reflective protective glass - Marking field: 110 × 110 mm Control: - Windows 11 Iaedpeyiz Dzefx Afnen - 19" TFT monitor, keyboard, mouse - Interfaces: RS232 / Ethernet / USB - KOLLTRONIC marking software: text, logos, QR/Data Matrix, barcodes Operation: - 230 V / 50 Hz - 15–35 °C Condition: - New machine - CE compliant · Made in Germany

Condition: like new (used), functionality: fully functional, 2 x 150 liter dryers with the option to connect an additional 150 liter container. The drying unit is already prepared for this. Iedpfx Afsxk Tx Senoan

Year of construction: 2007, condition: excellent (used), Inline can / jar washer & dryer Completely stainless steel Iaodpeh Eazzjfx Afnon Container Max 180mm wide & 250 hight as-is or tested and adjusted to costomer needs

Condition: good (used), Year of construction: 2017, Boge C10 LDR-350 Screw Compressor + Dryer + Receiver tank Manufacturer: Boge Model: C10 LDR 350 Iedpfxsyfpk Us Afnoan Year: 2017 Max. pressure: 10 bar Receiver volume: 350 liter Rate of flow: 1,03m3/min Motor speed: 1.500 min Motor Power: 7,5kW Machine Dimensions LxWxH: 1.960x72x1.350 mm Machine Weight: 350 kg.

Year of construction: 2025, condition: used, New exhibition machine! Stationary piston compressor with refrigeration dryer, condensate drain, oil-water separator, and pre-/fine filter. The universal model with belt drive and high-quality equipment. Especially suitable for craftsmen. These compressors are used wherever compressed air quality, durability, and efficiency are essential. Long service life thanks to 2-stage high-performance units with low speed, specially machined cast-iron cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimal cooling through large fan wheel, motor with overload protection, easy condensate drainage via standard 1/2'' ball valve, equipped as standard with Condor pressure switch and manometer, supplied on safety stand pallet with vibration dampers. Technical data: Suction capacity 650 l/min, FAD 520 l/min, max. pressure 10 bar, tank capacity 270 l, cylinders/stages 2/2, speed 920 rpm, motor output 4 kW / 400 V Location: Rieth Iodpfsyi Hdysx Afnjan

Condition: new, Year of construction: 2025, functionality: fully functional, sweeping width: 530 mm, fuel type: electric, drive type: Elektro, Scrubber dryer Iedpfx Afeyi Impenoan Condition: New machine Technical condition: New Battery voltage: 24V Battery capacity: 180Ah Battery type: Gel Battery year: 2025 Battery condition: New Description: New machine with 12 months warranty

Condition: good (used), Stock number: 3078 Manufacturer: Labotec Model: DDM 120-3 Year of manufacture: 1995 Machine number: 9SP5 5701642 Con-Evator PGT: 9ST6 1405 610 Operating hours: Container capacity: 120 l Temperature range: up to 180 °C Condition: good Iaedpfxjyk Hf Tj Afnjn Dryer: 9 kW Blower: 1.5 kW Weight: 215 kg Dimensions: 1,200 x 800 x 1,700 mm

Condition: excellent (used), ID - 344 980-14 SN - 29 212 466 Connection via terminals for max. 20A with suitable cover for ribbon cable Module width: 50 mm Iaodpeud Ilrefx Afnen Supply voltage:400V~ +/-10% 385V- to 750V- This UV 105 can be used with both Heidenhain and Siemen inverter systems. inverter systems. All technical specifications are without guarantee.

Year of construction: 2022, condition: new, functionality: fully functional, Lauber wood dryer longitudinal ventilation Chamber with stacking trolley Net volume 7.2 m3 with wood temperature measuring point -> new / unused / original packaging -> available immediately (standard delivery time approx. 3/4 year) -> see detailed description in the photos -> collection, loading, etc. by buyer -> transportation, customs clearance and insurance by buyer Iaedpfxemidtre Afnjn

Condition: used, Year of construction: 1988, machine/vehicle number: 1743, UV-Beschichtungsmaschine - UV-Coating machine Billhöfer Gula Speed CGS JKN 112Year 1988 - Serial-No. 1743 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card board Online-Video-Inspection by Skype-Video Iedoh Axquopfx Afnean We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1982, UV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV-112Year 1982 - Serial-No. 9035 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card boardUV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV- Isdpsh Ayfpefx Afnsan Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2020, functionality: fully functional, Refrigeration dryer with condensate separator, year of manufacture 12/2020, capacity/volume flow: approx. 1.75 m³/min (≈ 105 m³/h / 1050 l/min), pressure dew point: typically +3 °C (under reference conditions), max. operating pressure: up to approx. 14 bar, dimensions: approx. 255×455×708 mm, weight: approx. 36 kg, in good condition. Price ex location. Transport available at extra cost! Iaodpfx Asybbggefnon

Year of construction: 2009, condition: used, Used machine environmentally friendly thanks to the use of R404A Energy savings due to rotary refrigerant compressor (20–30% more efficient than conventional piston type) Iaedpfx Ajw Rhi Tefnon Intelligent condensate drainage Maximum operating pressure: 13 bar Processed compressed air volume: 5,200 l/min, 7,312 m²/h Motor power: 1.58 kW, 230 V Maximum inlet temperature: 55°C Dimensions: 557 x 460 x 789 mm Availability: short notice Storage location: Röllbach

Year of construction: 2011, condition: used, Rated power: 5.5 kW Motor speed: 2930 rpm Max. operating pressure: 11 bar Dryer type: CT 8 Refrigerant: R134a Refrigerant charge: 0.260 kg Max. operating pressure (cooling system) HP 21 bar / LP 16 bar incl. Aquamat CF 3 oil-water separator Storage location: supplier Iodpjxtnvkefx Afnsan

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Iedpfx Aox R D Efsfnean Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 2000, Manufacturer: Guedu Rosenmund Model: RGFD 1.1 Year: 2000 Type: Agitated Nutsche Filter / Dryer Iaodpsx R Didsfx Afnjn Filtration area: 1.1 m2 Capacity : 1350 Litres Pressure : -1 / 3,9 bar Half shell : 20 litres Mixer Empty weight : 3200 Kg 316 L stainless steel Agitation up/down stroke: 400 mm Application: solid-liquid separation of mixtures to be filtered under pressure and/or vacuum Hydraulic group Electrical cabinet Complete technical file with certificates and drawings.