Used Unwind Rewind for sale (481)

Condition: excellent (used), Year of construction: 2021, Ref: 11034 . 2021 Komfi Sagitta 76 Laminator Latest model, B1 size sheet thermal laminator Features: Robust and powerful machine suitable for lamination in continuous operation with a standard volume of millions of sheets per year. Designed for time-efficient work: feeding sheets from a pallet including easy placement of the pallet into the machine using laser pointers Quick adjustment of the machine to a new job, air shaft, pneumatic snapping unit or hot knife for reliable separation of a wide range of foils. Digitally printed jobs can be easily and conveniently processed on the machine. Well suited and highly applicable for both commercial printing and the packaging industry. Energy saving zone heating system with fastest heat up time. Stop on the sheet overlap to avoid waste sheets. Zero overlap possibility for processing thick substrates. Automatic pressure and temperature detection to prevent irregularity in lamination quality. End of job function for easy rewind of film. Sensor for sheet separation detection and jam detection. Job settings memory Built-in internet connectivity for service support. Equipped with: Feeder: Double action feeding head for reliable feeding even at high speed and small format. Front lay register for precise and constant sheet overlap. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Adjustable separation blowers for reliable separation of sheets from the pile and trouble-free loading of long sheets. Laminating unit: Powerful pneumatic pressure system to ensure excellent laminating result. Adjustable device with distance stoppers to enable processing thick substrates and windows lamination. Air shaft for 3” reel core laminating film. Adjustable spread roller for perfect smoothing of difficult film before lamination roller. Zone heating of the laminating roller saves energy when laminating small formats. Temperature sensor inside the cylinder for extremely precise regulation Polyurethane pressure roller for longer roller life. Hedpfx Aexx Uzqsa Eog Separator & delivery: Rotary separation knives for reliable film separation at high speed. Built-in perforator to support trouble-free sheets separation, or to be used for special jobs where knife is not applicable. Pneumatic driven separation roller. Automatic (pneumatic) skew wheel increases reliability of separation for wide range of jobs. Good to use for long sheets. Adjustable speed of snapping roller for perfect separation of difficult jobs. Jogging table. Specification: Max. production speed: 60 m/min (50 m/min with hot knife) Max. sheet size: 760 x 1120 mm (up to 1330 mm) Min. sheet size: 300 x 220 mm Paper weight: 115-600 gsm Max. paper pile height: 83 cm (incl. pallet) Heat-up time: 3-5 minutes Overlap accuracy: ± 0.8 mm Dimensions (incl. delivery desk): 4.25m x 1.55m

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Heidelberg SBG | 56x77cm Hjdpsx Eizmsfx Aa Eog ・Fully Refurbished 2015 ・2 Foil Rewind ・4 Zone Heated Aluminium Drop-In Plate ・Automatic Impression ・Superb Machine | Fully Serviced | Excellent Condition CAN BE VIEWED AND TESTED IN THE UK

Condition: good (used), Reel, unwinding reel, winding reel, unwinding reel, sheet metal unwinder -Reel: with 3 retaining brackets Hjdpfx Aox Ifc Toa Esg -Diameter: 950 mm -Reference: M20 shaft, dimensions see photos -Dimensions: Ø 950 x 410 mm -Weight: 35 kg

Condition: used, Year of construction: 2015, functionality: fully functional, Manufacturer, Modell: Xeikon 3500 + GM Converting System Scope of delivery: Xeikon Press + GM Inline Finishing System Status: Xeikon Service Date of Installation: June 2016 Year of Manufacture: 2015 Counter: ca. 5,6 Mio running meter Operation hours: ca. 5070 h Print Technology: Dry toner electrophotography Imaging Head: High-Precision LED Matrix Printing Engines: One-Pass, 5 (CMYK+White/Spot) Media Input: Web-fed Media Output: Rewinder Imaging Quality: 1200 x 3600 dpi, variable dot density Media Width: 250-516 mm Toner: QA-I dry toner Hodpfx Aaovitwpe Ejg Printing Speed: Up to 594 sqm/h Media Weight: 40-350 g/m?, 550 ?m Substrates: coated/uncoated Papier, PE, PP, PET, Vinyl, Coex-Folie Digital Front End: Xeikon X-800 Xeikon 3500 | Digital Label B2 Press, Year of manufacture 2015, First Installation June 2016, Print Counter: around 5,6 Mio. meters (status May 2024), Operating hours: around 5.070 hours (status May 2024), Digital Front End: Xeikon X-800 with control PC and 2 monitors, Xeikon Software My Press Version 6.63.x, Machine is expected to be dismantled in week 24, Machine is still in service contract GM DC 500 | Converting System, the DC500 can be set up as an in-line extension to a digital label printing system, allowing the web to continue directly into the converter from the digital press, Year of manufacture 2016, First Installation June 2016, Web Width 100 mm ? 500 mm, Substrates 50-200 gsm, Buffer for manual change of rools in production, Full or Spot Varnish possible, Semi-rotative Die-Cutting Station, Semi-Rotary Speed 40 m/min, Die Plate Size (repeat) 50-558,8 mm, Slitting | 1x Dish Knife and 15x Razorblades, 2 Rewinders with 75 mm diameter, Waste Matrix Rewinder, 4 Anilox Roller, 4 Print Cylinder for varnish, Machine is expected to be dismantled in week 24, Machine was in service contract, Pictures and datasheet attached Through many years of serious and professional development, JORG Graphische Produkte GmbH has established itself as one of the world's leading providers of certified pre-owned digital printing and finishing systems. Since we have started the Digital Press business in 2009 we have sold more than 190 High-End Digital Printing Systems for commercial, packaging and label printing worldwide. Meanwhile, the scope of services of JORG includes qualified advice according to customer specifications, Machine Sales, On-Schedule Delivery Service, On-Site Installation with Operator Training as well as After-Sales Service and Support. The machines of the brands such as Xeikon, HP Indigo, Epson etc. are currently located in the following countries: Austria, Belgium, Botswana, Brasil, Bulgaria, China, Chile, Croatia, Cyprus, Denmark, France, Germany, Ivory Coast, Guinea, Hong Kong, Hungary, India, Israel, Iran, Italy, Jordan, Kenya, Kyrgyzstan, Latvia, Madagascar, Mali, Malta, Mauritius, Macedonia, Morroco, Netherlands, Nepal, Panama, Romania, Russia, San Marino, Switzerland, Sweden, Serbia, Slovakia, Slovenia, Syria, South Africa, Tahiti, Taiwan, Turkey, UK, Uruguay, USA, Wales

Condition: like new (used), Year of construction: 2025, product width (max.): 340 mm, Unwinding Web guiding Corona treatment Web cleaner 8 x flexo print stations 8 x GEW UV dryers, GD3 Hjdpfx Aasx I D Uhj Ejg 8 x chill rolls 1 rail system 1 cold foil unit 1 lamination unit 1 print-on-glue unit for 2 colors Video inspection Register control Rewinding unit Waste rewind 1 rotary die cutting unit Chilling machine 8 x sets of printing sleeves with magnets 8 x anilox rollers

Condition: refurbished (used), Year of construction: 2013, We have multiple Mueller Apparatebau paper cutting systems available! Paper cutters fo pin feed available. Hedpfx Aaetwc Abs Ejg We offer all machines after complete maintenance. We mostly have model 6612 but we also have a paper cutter system type 6611. Next to that we have a lot of other Mueller modules like unwinder, collating module and folding modules etc etc! Just let us know and we have the solution!

Condition: excellent (used), Compressed air thermoforming machine with unwind stand, double heaters, stacking with conveyor belt Hedjwt D Npjpfx Aa Ejg

Condition: used, For Sale: ULMA Ocean Shrink Wrapping Machine (2007) – Recently Out of Production We are offering a ULMA Ocean horizontal shrink wrapping machine, just taken out of production and in ready-to-use condition. This is a robust industrial shrink film packaging solution, ideal for high-speed packaging applications. The machine also includes a residual film rewinder for clean and efficient film handling. Key Features - Brand: ULMA Packaging - Model: Ocean - Year: 2007 Hedsx Ic E Sjpfx Aa Ejg - Type: Horizontal Flow Wrap Shrink Wrapper (HFFS) designed for shrink film packaging at high output rates. ([ULMA Packaging](?utm_source=)) - Industry Use: Originally developed for the frozen fish sector, but suitable for a wide range of products requiring shrink-wrapped finish. - Construction: Heavy-duty stainless steel and hygienic design for easy cleaning and operation in demanding environments. - Sealing System: Innovative oval motion cross sealing jaws for high-speed sealing and efficient product transfer. - Compact Footprint: Requires less than ~5 m² of floor space. Estimated Technical Specifications (Based on typical Ocean configuration and published ULMA data for this model type) - Packaging Speed: High output (machine is capable of high-speed operation depending on product and film type). - Film Type: Polyolefin shrink film suitable for robust, retail-ready packaging. - Film Width Capacity: Typically capable of handling standard industrial shrink film widths (consult for confirm). - Operation: Automatic horizontal feed with cross sealing and continuous shrink tunnel compatibility. - Hygienic/Clean Design: Built to minimize dust and facilitate washdown cleaning. - Additional Equipment Included ✔ Rest Film Rewinder – collects leftover film for improved workflow and reduced waste. ✔ Optional shrink tunnel interface for seamless shrink finishing. ----- Excellent choice for food producers, contract packers, or industrial lines looking for proven ULMA reliability with an efficient shrink-pack solution. Contact us for more details, photos, or to arrange a viewing. ----- Als je extra details wilt toevoegen zoals precieze product-afmetingen, snelheid in stukken/minuut of elektrische specificaties kun je me die info geven of indien beschikbaar de machine-tag/plaatjes sturen — dan werk ik de advertentie verder af.

Condition: good (used), Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder Hodpfx Asi Exp Eea Esg -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M Belt tension: pneumatic -Material stress: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic power unit: can be supplied for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332 kg

Condition: used, Year of construction: 2005, functionality: fully functional, 1. Manufacturer • Manufacturer: Karl Eugen Fischer GmbH 2. Machine Identification • Machine type: Adhesive Strip Applicator with Layer Gauge • Model: HTBC • Year of manufacture: 2005–2015 (serial production range) 3. Intended Use • Cutting and application of rubber strips and/or ply materials • Designed for use in tire manufacturing and rubber processing 4. Mechanical Construction • Heavy-duty steel frame construction • Industrial green paint finish • Elevated operator platform with integrated access stairs 5. Conveyor and Material Handling • Wide flat-belt conveyor system for continuous transport of rubber sheets • Conveyor system integrated into the cutting and application process 6. Unwinding and Rewinding System • Overhead and lower roller stations • Designed for handling liner and ply materials • Configured for controlled unwinding and rewinding operations 7. Electrical Equipment • Power supply: 400 V / 50 Hz • Control cabinets: Hodpex Iuf Refx Aa Ejg – Large, free-standing grey control cabinet bank – Integrated climate control system 8. Safety Equipment • Yellow safety fencing • Mechanical safeguarding of hazardous areas

Condition: like new (used), Year of construction: 2012, operating hours: 344 h, functionality: fully functional, grinding length: 850 mm, grinding width: 400 mm, total height: 505 mm, overall weight: 3,500 kg, Equipment: documentation/manual, Base machine Type Linea Iron 6.3 Preparation for magnetic chuck with safety function Magnetic chuck 600 x 300 x 70 mm Paper band filter unit with manual paper unwind Hedpfxext Rt Ss Aa Eog Air cooling for hydraulic oil Dressing fixture at the end of the table, incl. space for lateral diamond 2x grinding wheel flanges with manual weights Machine grinding range: Longitudinal 850 mm. Cross 400 mm including max. B (50 mm) grinding wheel. Height distance table to spindle center 505 mm. Weight 3,500 kg.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz - Power specifications: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Technical data: - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm - Capacity: Up to 25 cycles/min* (Special) features: - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) Hsdpfx Aaew Ryt Do Esg - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Year of construction: 1997, condition: ready for operation (used), General Data Measurements width 2610 Measurements depth 3270 mm Measurements height 2240 mm Machine weight 2600 kg Control Unit Model System 16-WB Brand FANUC Main Drive Max taper angle ± 30 degrees/80 mm (option ± 45 degrees/40 mm) Number of axis 5 Movement X-Axis Movement 520 mm Y-Axis Movement 370 mm Z-Axis Movement 300 mm (275 mm in water bath) Hjdpfx Aaex Imp Ij Eeg U-Axis Movement ± 60 mm W-Axis Movement ± 60 mm Workpiece Workpiece X 790 mm Workpiece Y 730 mm Workpiece Z 275 mm Workpiece weight 650 kg (with coaxial spindle), 450 kg (with water bath) Table Outer length 750 mm Outer width 590 mm Additional Equipment Bedra wire unwinding device BAS 45/100E (to the left of the machine), capable of handling wire spools weighing up to 45 kg This 5-axis FANUC Robocut Alpha 1C erosion machine was manufactured in 1997. It features a coordinate travel of 520 x 370 mm on the X and Y axes, and a Z-axis adjustment of 300 mm. The machine can handle a maximum workpiece weight of 650 kg and offers a rapid traverse of 900 mm/min. Ideal for precision erosion tasks, the FANUC Robocut Alpha 1C machine we have for sale. Contact us for further details regarding this erosion machine. Application Types EDM

Condition: good (used), functionality: fully functional, Size: max 340 x 260 mm; min 90 x 115 mm Size (without lap): max 340 x 250 mm; min 90 x 115 mm lap: max 15 mm folio lap: min 6 mm low folio lap: min 8 mm Product size, stitching unit: max 340 x 260 mm; min 210 x 155 mm booklet thickness: max 6 mm Mechanical speed 1:1: max 25,000 t/h Mechanical speed 1:2: max 30,000 t/h equipment gathering chain & feeder - 8 station gathering track - 8 single base - 6 feeders 416 - product gluer 423 stitching unit - stitching unit 430 - 15" inch chain pitch - wire unwind device - thickness control/ plus-minus - 4 stitching heads three knife trimmer - three knife trimmer 426 knives - 2 sets of knives delivery - compensating stacker Robusto optional Equipment: --- not included --- Hedpfou S Ncbsx Aa Eog - crane system - bundle feeder - print roll feeder - additional stations - card gluer - div. conveyor belts - compensating stacker - strapping machines - wrapping machines - palletizer

Condition: good (used), Year of construction: 1996, Reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Manufacturer: Cisam Impianti, FEEDER belt feeding system -Type: 1000/2B -Passage: 395 mm -Transmission: Ratio 68.37:1, max. 251 Nm -Pneumatic cylinder contact force: 1.6 tons -Individual components: see photos Hjdpfxjitdiko Aa Esg -Dimensions: 1340/920/H1690 mm -Weight: 829 kg

Condition: used, Year of construction: 2009, THIMON Automatic Pallet Hooder LIGNE CPHP 2000 Manufacturer Thimon – Savoie Hexapole, Rue Louis Armand, BP 69, 73420 Méry, France Type Hedpfx Asx N Utqoa Esg Industrial automatic pallet hooder (film hood application with roll unwind) Industrial Applications Automatic hooding of pallet loads at end-of-line to stabilize, protect, and secure pallets before shipping. Used on production and logistics lines in food, beverage, chemicals, cosmetics, and FMCG industries. Main Technical Specifications - Type: LIGNE CPHP 2000 - Year of manufacture: 2009 - Registration / ID: 507304 - Compliance: CE Machine Usage The LIGNE CPHP 2000 automates the application of a film hood over a full pallet load. The pallet is conveyed into the hooding area, the hood is formed and applied around the load to ensure pallet stability, protection against dust and moisture, and consistent handling and transport performance. Features / Differentiators - Large-format film roll unwind system suited for industrial throughput and high-volume pallet loads - End-of-line integration with pallet conveying and guarded safety area - Clear traceability for service and spare parts through ID 507304 and type LIGNE CPHP 2000

Condition: used, Year of construction: 2016, MACHINING CAPACITIES: - Panel height (thickness) to be processed: 8 to 60 mm 10 to 45 mm when using the corner rounding unit - Panel length: >=220 mm - Panel width: 90 to 1100 mm - Feed (advance speed): 11 m/min - Workpiece overhang: mm - Minimum-maximum dimensions for panel radiusing: Ø x mm - Panel overhang relative to the conveyor belt: - Max spindle cutting depth: mm² - Workpiece gap: mm Roll edging: - Thickness: 0.4 to 3 mm - Width (height): panel thickness +4 mm - Minimum length: 200 mm Hsdox Dcn Njpfx Aa Ejg Strip edging: - Maximum thickness: 6 mm maximum 3 mm with corner rounding unit - Width (height): panel thickness +4 mm - Minimum length: 220 mm 280 mm with corner rounding MACHINE CONFIGURATION: - Unwinding table, usable Ø795 mm - Working table: L 4.15m / H 91.5 cm With 500 mm front extension - Chain feed conveyor - Anti-adhesive spray system - Edge trimming units (2 spindles) 12,000 rpm - Gluing station with interchangeable glue pot, 180-200°C Pneumatic pre-cut guillotine Pressure section with 3 rollers, 1 of which is motorized - End-trimming aggregate with 2 blades, 12,000 rpm - Top/bottom flush trimming unit with copying pads - Corner rounding unit - Radius scrapers - Straight scrapers Digital counters for settings (type SIKO) OTHER FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 21A - Feed motor: 0.75 kW - Spindle motors: 2 x 1.5 kW - Saw motors: 2 x 0.19 kW - Trimming (milling) motors: 2 x 0.55 kW, rpm - Pneumatic supply: 8–10 bar, dry air Required working pressure: 6 bar - Extraction ports: 3 x Ø75 mm int. + 2 x Ø50 mm int. + Ø95 mm int. Required volume flow: 1600 m³/h - CE marking, lockable safety switch, emergency stop push buttons Operating dimensions: 4.45 x 1.70 x h.1.80 m Transport dimensions (L x W x H): 4.25 x 0.90 x h.1.50 m Weight: 1430 kg

Condition: good (used), For sale is a winder plant with several modules Proprietor GEORG SAHM GMBH & CO. KG MACHINE FACTORY Number of modules 6 Types 5*Bitensor 910 E / 1* Sahm 410 E Sahm 410 E Winding speed Max. 350 m/min Winding width Max. 300 mm Drive Frequency controlled Frame 3-tier Bobbin diameter Max. 355 mm Yarn tension 100 to 1250 cN Laying system Electronic Bitensor 910 E Year of manufacture 2015 Unwinding speed 70 to 200 m/min Transverse length of unrolled packages Max. 300 mm Drive frequency controlled Hodpfx Aolz Snnja Esg Frame 3-tier = 9 unwinding units Yarn tension 50 to 400 cN Weight of unrolled packages Max. 12 kg Tube inner diameter of unrolled packages 75 to 94 mm Package diameter of unrolled packages Max. 320 mm Prices plus VAT S2qax Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2015 servo envelope inserting system available. 12 station base system!!!!! Hjdpfx Aasxyfmgs Eog More pictures will follow soon. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2015 Configuration: - 12 station base - 11x RF2 rotary feeder (other feeders possible) - Divert bin 1, 2 - Conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: used, Year of construction: 2004, Cloth cutter Kolbus: KS Year: 2004 Description: -Unwinder -Circular knives: 10 -Rewind for waste material: 1 Hsdpfx Aaexy Rfbs Esg -Delivery table Material width: max. 1.400 mm.

Condition: good (used), Double reel, reel, unwind reel, motorized reel for sheet metal processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, sheet metal unwinder Hedpfxshfavue Aa Eeg -Manufacturer: OBRU, height-adjustable reel with drive -Diameter/Width: adjustable, see photos -Dimensions: 750/730/H1130 mm -Weight: 114 kg

Year of construction: 2022, condition: as good as new (ex-display), WARRANTY: 12 months A fully operational multicolor inkjet system from showroom year 2022 for sale. SYSTEM ROLL - ROLL PROCESSING Description: The R540 is a multi-color inkjet press capable of printing 600+ duplex multi-color A4 pages per minute. The system takes advantage of the Matti inkjet writing system. In a single unwind, primer unit (optional), printing unit with IR drying, cutter and offset stacker are integrated. Variable formats can be produced. The system can be operated at different resolutions, e.g. 600x1200dpi, 600x600dpi, etc. Inks are available that work on both uncoated and coated papers. In addition, magnetic inks (MICR) can be used for security printing, e.g. checks, etc. Inkjet Machines - Advantages Hodeiz A H Hopfx Aa Esg - Pre- and post-processing integrated in one machine - Primer module integrated - Operation of the entire machine from one user interface - Variable formats - automatic changeover, without user intervention - Low printing costs compared to laser printers - Compact dimensions - Worldwide support, via "Matti Assited Reality Experience" - MARE - Possibility for individualization - adapt the DFE to your workflow - Accurate ink consumption estimation without printing - always costs always in view The system is sold due to not received customer acceptance. A return guarantee is excluded due to new goods. Purchased is as seen and per balance of all claims. With warranty services and bookable service package worldwide Test runs can be made on site by appointment The equipment can be inspected on site at the company. Payment options after viewing and in advance: - Bank transfer - Partial payments possible Price reductions: In principle, the selling price can be negotiated on site. Shipping / Pickup A shipping & packaging is basically against additional billing and after receipt of payment possible. The shipping - Verpackunbgskosten must be clarified in advance, which in turn will be added to the selling price of the goods. A self-collection is possible in principle, but can only take place after confirmed receipt of payment, regardless of which payment method has been chosen in advance. Other Appointments are agreed exclusively through this platform. Inspection In principle, the plant can be visited during normal business hours, location of the warehouse will be announced with definite interest.

Condition: used, Year of construction: 1989, About Bickel - HK 3/50 The Bickel HK 3/50 is a high-performance, narrow-web flexographic printing machine designed for label and packaging applications. This machine is ideal for printing on a variety of substrates, including paper, film, and foil. Key features of the HK 3/50 include its compact design, high-speed printing capabilities, and advanced ink system. The benefits of this machine include its ability to produce high-quality prints at fast speeds, making it an ideal solution for label and packaging converters. Typical applications of the HK 3/50 include printing labels, stickers, and packaging materials for the food, beverage, and pharmaceutical industries. Key Technical Aspects: Dimensions and Specifications : The Bickel HK 3/50 has a compact footprint of 3.5 meters in length, 1.5 meters in width, and 2.2 meters in height. It weighs approximately 2,500 kilograms and has a maximum web width of 330 millimeters. The machine's maximum printing speed is 200 meters per minute. Paper Handling : The HK 3/50 features a 3-spindle unwind system with a maximum unwind diameter of 1,000 millimeters. The machine is equipped with a servo-driven rewind system with a maximum rewind diameter of 800 millimeters. The paper handling system also includes a web guide system and a Corona treatment unit. Printing Unit : The HK 3/50 features 3-6 printing units, each with a maximum printing width of 330 millimeters. The machine uses a flexographic printing process with a resolution of 508 dpi. The printing speed can reach up to 200 meters per minute. Ink System : The HK 3/50 uses a water-based ink system with a chambered doctor blade system. The ink system features a 3-liter ink tank and an automatic ink circulation system. The machine is also equipped with an anilox roll cleaning system. Hsdpfx Aaex Exato Eog Plate Cylinder : The plate cylinder of the HK 3/50 has a diameter of 250 millimeters and a repeat length of 330-660 millimeters. The plate cylinder is designed for easy plate changing and features a pneumatic clamping system.

Condition: ready for operation (used), 4 x wire unwinding units for 50 and 25 kg wire spools Hodpfxoxrwflo Aa Eeg

Condition: good (used), Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, roller feeder, reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Profiling system: Roller insertion with cooling water/hot water device, from slat/blind manufacturing -Sealing heads: maier type DX 215 L / DX 215 R -Rollers: Ø 120 x 220 mm Hedpfx Aspwnf Nja Eeg -Drive: 1.1 kW -Individual components: see photos -Drive shaft: Ø 35mm -Dimensions: 1120/405/1310 mm -Weight: 312 kg