Used Unwind Rewind for sale (449)

Condition: ready for operation (used), Year of construction: 1985, max web width 1900 mm Klodpfsw Nvkisx Ablet

Condition: refurbished (used), Year of construction: 2012, LYISH Rewinder for Toilet paper and Hand towel rolls, and NON-woven rolls. Standard pyramid pattern for max volume. Rolls are perforated to length of 115mm (other sizes can be adjusted) Rolls length setting on PLC screen. The rolls are sealed with glue line and tail cutting. Also optional - coreless rolls production on Stainless steel mandrel Specifications: - Rewinding speed (max.) 350 m/min - Paper width – 2.75 m (Max) - Parent reel dia. – 1.25 m (Max) - Product dia. 350 mm (max.) - Pneumatic lifting arms for jumbo roll - Paper grade 17-70 g.s.m. single or double ply - Perforation – standard system includes 4 rotating blades, distances between perforation lines changes by changing gears. - Embossing – steel to rubber, standard pyramid pattern (special pattern – optional). -Core guiding system for logs – preventing conic edges during rewinding of large diam rolls - Finishing station including glue injection, cutting and turning the rolls for adhesion forming a tail seal. - Automatic ejection of finished rolls sideways out of the machine. - Machine is supplied as standard together with two 75 mm dia. mechanical shafts for the jumbo roll. - Power – 18 kw - Weight – 6500 kg The machine was refurbished by the producer - LYISH , and will be supplied with guarantee for 12 months. On line Slitting system (Slitter-Rewinder) - optional, can be added if required. Edge embossing system - optional (can be added if required) Klodpjd Skg Rjfx Ablet Full CE safety covers - optional (can be added if required)

Condition: new, empty load weight: 950 kg, maximum load weight: 2,550 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 5,420 mm, loading space width: 2,090 mm, color: silver, construction height: 1,000 mm, working width: 2,150 mm, Hydraulics, automatic reverse drive, drive-on ramp, full aluminium floor / tiltable loading area / electric winch / wheel stop bracket / spare wheel, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. full aluminium floor / tiltable loading area / electric winch / wheel stop bracket / spare wheel Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 950 kg - Payload: 2,550 kg - Interior dimensions: 542 x 209 x 0 cm (L x W x H) - Overall exterior dimensions: 725 x 215 x 100 cm (LxWxH) - Loading sill height: 66 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - Floor: full aluminium floor! - Drop sides: without - Drop side height: 0cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes - Hydraulics: manual hydraulics - Drive-on angle: - Wheel stop: adjustable wheel stop bar - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Lashing eyes: 12 pieces in the floor (750kg/pc) - Winch: yes - Electric with adjustable winch bracket - Supports: Support at the rear - Ramps: not necessary, drive-on wedges mounted on the vehicle - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Aluminum floor - Extremely robust - 1 sliding wheel stop bracket - Very stable welded steel frame - Tiltable loading area by means of hand hydraulics + 2 lifting cylinders - Frame cpl. frame completely hot-dip galvanized - many stable cross beams therefore high point load - additional longitudinal struts continuously welded in - 14 lashing eyes inside the loading area, rubber-coated (750kg/each) - automatic reverse drive - ALKO overrun device and parking brake - ALKO coupling head - very stable V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing lights plug - reversing lights - large dimensioned safety lighting - LED rear lights - integrated rear fog light - swivel lighting - automatic center support wheel - spare wheel mounted under loading area - registration papers: COC papers Incl. optional equipment: - cable winch, electric, adjustable left & right, as well as adjustable in length - incl. 12V battery for cable winch 12V battery for cable winch - weather protection cover for cable winch Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - anti-theft device - tarpaulin body - fixed box body - drop sides - additional wheel stoppers - storage box - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Kljdpsu Hrzfjfx Ablet

Condition: new, empty load weight: 820 kg, maximum load weight: 2,180 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 5,020 mm, loading space width: 2,090 mm, color: silver, construction height: 1,000 mm, working width: 2,150 mm, Equipment: cable winch, Hydraulics, Automatic reverse drive, Drive-on ramp, Tiltable cargo bed, Electric cable winch / Full aluminium floor / Tiltable cargo bed / Wheel stop bracket / Spare wheel, Hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. Electric cable winch / full aluminium floor / tiltable loading area / wheel stop bracket / spare wheel Technical data: - Make: Vezeko - Model: Imola - Vehicle type: Car transporter - Vehicle condition: New vehicle - First registration: without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (LxWxH): 502 x 209 x 0 cm - External dimensions (LxWxH): 670 x 215 x 100 cm - Loading height of floor: 60 cm - Perm. Total weight: 3,000 kg - Unladen weight: 820 kg - Payload: 2,180 kg - Chassis: High loader (wheels under the body) - Tyres: 195/55R10C - Chassis: ALKO rubber spring axle - Support wheel: Yes, automatic - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Electric cable winch - Freely adjustable bracket - Manual remote control with cable - 12V battery under the loading area in the box - Battery is charged via the 13-pin plug from the towing vehicle, provided the socket is fully occupied. - Full aluminium floor, with anti-slip coating - 1 adjustable wheel bumper - very stable welded steel frame - tiltable loading area by means of hand hydraulics + 2 lifting cylinders - loading area 434 cm + 68 cm approach wedge - side panels color: black - wheel stopper bar / lashing eyes color: red RAL 3020 - frame cpl. hot-dip galvanized - many sturdy cross beams therefore high point load - additional longitudinal struts welded in throughout - 14 lashing eyes inside the cargo bed, rubber-coated (750 kg/pc.)) - spare wheel mounted under cargo bed - automatic reverse drive - ALKO overrun device and parking brake - ALKO coupling head - very sturdy V-drawbar REINFORCED - 13-pin plug - reversing lights - large rear lights plug - reversing lights - large dimensioned safety lighting - swiveling LED rear lights - integrated rear fog light - swiveling lighting - automatic center support wheel Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - anti-theft device - tarpaulin body - fixed box body - drop sides - additional wheel stoppers - storage box - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Kljdpfx Aou Hryhoblot

Condition: new, empty load weight: 960 kg, maximum load weight: 2,540 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 5,420 mm, loading space width: 2,090 mm, color: silver, construction height: 1,000 mm, working width: 2,150 mm, Hydraulics, automatic reverse drive, drive-on ramp, full aluminium floor / tridem / tiltable loading area / electric winch / wheel stop bar / spare wheel, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. full aluminium floor / tridem / tiltable loading area / electric winch / wheel stop bar / spare wheel Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 960 kg - Payload: 2,540 kg - Interior dimensions: 542 x 209 x 0 cm (L x W x H) - Overall exterior dimensions: 725 x 215 x 100 cm (LxWxH) - Loading sill height: 61 cm - Tires: 195/55R10C steel rim - Brake: yes - Support wheel: yes, automatic - 100km/h: at extra charge - incl. Vehicle documents Vehicle superstructure: - Floor: full aluminium floor - Drop sides: without - Drop side height: 0 cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes - Hydraulics: manual hydraulics - Drive-on angle: approx. - Wheel stop: adjustable wheel stop bar - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Lashing eyes: 14 in the floor (750kg/each) - Winch: yes. electric with battery, winch bracket can be moved left and right - Supports: Support at the rear - Ramps: not necessary, drive-on wedges mounted on the vehicle - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Tridem / 3 axles - Aluminum floor - Extremely robust - Winch, electric, can be moved left & right, as well as adjustable in length - Incl. 12V battery for cable winch - weather protection cover for cable winch - 1 movable wheel stop bracket - very stable welded steel frame - tiltable loading area using hand hydraulics + 2 lifting cylinders - frame cpl. frame completely hot-dip galvanized - many stable cross beams therefore high point load - additional longitudinal struts welded in throughout - 14 lashing eyes inside the loading area, rubber-coated (750kg/each) - automatic reverse drive - ALKO overrun device and parking brake - ALKO coupling head - very stable V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing light plug - reversing lights - large safety lighting - integrated rear fog light - swivel lighting - automatic center support wheel - registration papers: COC papers Accessories can be retrofitted - please enquire: - 100 km/h approval with shock absorbers - anti-theft device - tarpaulin body - drop sides - additional wheel stoppers - storage box - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Klsdpfx Abou Hry Ujlet

Year of construction: 2014, condition: good (used), DT250 Slitter / Rewinder Year of manufacture: 2014 Machine type: Tabletop slitter rewinder for narrow web label materials Condition: Used – in good working condition Technical Data Maximum web width: 254 mm Maximum unwind diameter: 450 mm Maximum rewind diameter: 360 mm Rewind shafts: 2 × 76 mm 1 × 40 mm Slitting system: Rotary shear slitting with knife holders Accessories and Tooling Spare slitting knives included Core adapters included Machine Dimensions Length: approx. 1300 mm Depth: approx. 700 mm Height: approx. 600 mm Application The Daco DT250 is designed for finishing self-adhesive label materials and is ideally suited for digital label production environments such as HP Indigo, Konica Minolta AccurioLabel, Xeikon, and similar presses. Typical applications include: - Slitting wide master rolls into multiple narrow label rolls - Rewinding and roll inspection - Production of finished label rolls for customers Ksdpjyt H R Iofx Ablslt - Converting digital label print jobs into finished products Advantages of this Machine - Compact and space-saving tabletop design - Ideal for small and medium-sized label converters - Reliable and user-friendly operation - Suitable for a wide range of self-adhesive label materials - Cost-effective finishing solution for digital label production

Year of construction: 2004, condition: good (used), Main Technical Specifications • Web width: max. 330 mm • Max. web speed: 200 m/min • Max. inspection speed: 150 m/min (100% inspection) • Unwind roll diameter: max. 700 mm • Rewind roll diameter: max. 500 mm • Core diameter: 76 mm (pneumatic expanding shafts) • Web tension control: 0.5 – 10 kg, steplessly adjustable • Electronic web guiding system (Fife with ultrasonic sensor) Kodpfx Abeylynwolelt Slitting & Finishing • Shear knife slitting unit • 3 top and 3 bottom knives included • Fine adjustment in 0.05 mm increments • Integrated edge trim extraction • Pneumatic splice unit • Integrated label and meter counter Inspection System fleyeVision print inspection system (100% inspection) • Matrix camera (1380 x 1040 pixels) • Flash illumination • Detection of print defects such as missing print, register deviation, spots, missing labels, missing text, matrix waste Inkjet System Imaje S8 Master 2.2G • Two nozzles per printhead • Suitable for marking up to four label lanes • Fully integrated into the central machine control system

Condition: new, Year of construction: 2025, Cardboard Core winder maschine for Toilet Tissue paper rolls Specifications • Carton web width 60 - 76 mm • Production speed 35 - 40 m / min • Core i. diameter 40 mm - 80mm • No. of plies 2 , 3, 4 plies. (more optional) • Cut off length 600-2900 mm Kljdpoit N Rvefx Ablst Features • Operation with either hot or cold glue. • Exchangeable mandrels. (for different core size) • Crush cutting by two or three circular cutters with synchronized movement. • Variable speed – electronic. (three phase)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 259747, Size 516mm, roll-to-roll digital printing machine for labels, etc., Xeikon X800 front end mypress: incl. barcode and trapping software, Hunkeler unwinder, airshaft, ultrasonic webguide sensor, GEW UV dryer, 3 slitting knives, GM rewinder, Corona Plus. Kledpfx Absy Rywwjlet

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film reel 0.37 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - Gear motor LENZE with brake to drive the film roll (0.37 kW) - Electrical system not ready for operation, see pictures Space requirement L x W x H approx. 1000 x 1000 x 1900 mm Kledpfxsud U Sfe Ablet net weight 360 kg good condition

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film roll 0.37 kW Kjdpfxou H R Iqe Ablslt Motor power - drive of the flat film into the vacuum shaft 0.25 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - LENZE geared motor with brake to drive the film roll (0.37 kW) - LENZE geared motor with brake to drive the flat film into the vacuum shaft (0.25 kW) Space requirement L x W x H 1900 x 1300 x 1900 mm net weight 580 kg Good condition

Condition: refurbished (used), Year of construction: 2004, MPS EF 330-8 COLOR FLEXO Labelpress machine equipment:  Age: 2004  Web width: 330mm  Unwind  Corona Treatment  New BST web guide (Camera)  Teknek two-sided web cleaner  Coldfoil  Lamination  8 x servo driven flexo units  8 x GEW UV dryers (E2C)  1 x screen printing Ksdstvap Eepfx Ablslt  Turnbar  Rotary Die-Cutting GAPMASTER  Rewinder

Condition: refurbished (used), Year of construction: 2005, MPS EF 330-8 COLOR FLEXO label press machine Labelpress was completely overhauled in May 2024 by MPS! Equipment:  Age: 2005  Web width: 330mm  Unwind Corona Treatment  New BST web guide (Camera) Kledpfx Aswh Sp Toblet  Teknek two-sided web cleaner  8 x servo driven flexo units  8 x GEW UV dryers (E2C)  Embossing Cylinder Die Cutting  Rewinders  Without tube scan  With possibility of buying Type MEDESA III/320, Age: 2004 for Label punching, we can send offer with separately mail.  Mechanical speed: 5-200m/min  Web tension maximum: 600n/cm  Substrate thickness: 20-350micron  Maximum diameter unwinder: 800mm  Maximum diameter rewinder: 800mm  Unwind and rewind expandable shafts: 76mm, 3inch Accessories:  9 x Anilox rollers  127 x printing cylinders  9 x Magentic cylinder  Spare parts

Year of construction: 2017, condition: good (used), Finishing machine for digitally printed labels - Web width: 340 mm (max.) - Full-rotary speed: 120 m/min. (max.) - Repeat length: 152 - 457 mm (max.) Unwinder: - Electronic web guide control system - 3''/76 mm shaft with magnetic brake - Roll diameter Ø 700 mm (max.) Rewinder: - 2 x 3''/76 mm shafts with magnetic brake - Roll diameter: 2 x Ø 600 mm (max.) - Automatic web tension control - 1 x 3''/76 mm shaft, matrix removal/waste UV Flexo Unit, full-rotary: - Servo-driven printing unit - Automatic register control - UV curing unit - 1 x anilox roller - 1 x plate cylinder Cold foil/laminating station: - 2 x 3"/76 mm shafts - Wet lamination / cold lamination - Laminate/delaminate Klodpfxoy Id T De Ablet Die-cutting unit, full/semi-rotary: - Die-cutting width: 330 mm (max.) - Die-cutting tolerance: +/- 0.15 mm - Magnetic cylinder: 22"/176 teeth - Automatic register control - Servo control Slitting unit: - Razor blade slitting - Shear knife slitting

Condition: used, Year of construction: 2008, Web width: 1320 mm Printing width: 1300 mm Printing repeat: 450 mm - 900 mm Unwinder type: Double Unwinder diameter: 1000 mm Rewind unit type: Double Rewinder diameter: 1000 mm Rewinder and unwinder: non-stop operation Maximum printing speed: 350 m/min Drying system: oil-based (oven not included in the machine) Printing capability: 8+1 (reverse printing of 8 sets) LEL concentration detection system Ksdpfxsy Ty Uze Abljlt Additionally: Corona treatment Printing support: ESA 24V ACE – upgraded in 2021 Viscometer system on printing stations Eltromat BST print control system – upgraded in 2019 Two BST cameras for viewing the print from both sides of the film – upgraded in 2016 Automatic CO2 fire extinguishing system Allen Bradley drive train communication module replacement – 2020 Shafts for hollow cylinders, screwed – 25 pcs Shafts for hollow cylinders, folded – 18 pcs Pressers (sleeves): 126 pcs

Condition: used, Used machine In all operating processes, materials are fed from the front side through the roller gap and bonded together by pressure. Standard number of axes: Material unwinding: 2 Silicone paper unwinding: 1 Roller gap adjustment: 0 - 52 mm Pressure: 0.3 - 0.8 N/mm Processing speed: Maximum: 5 m/min Slow operation: 0.6 m/min Kodpfoy Nugkox Ablelt Reverse operation: 0.6 m/min Noise level: > 70 dB(A) Material data: Max. width: 1400 mm Max. material diameter: Material unwinding: 200 mm Silicone paper rewinding: 150 mm Max. sheet thickness: 50 mm Core inner diameter: 76.2 mm Power supply: 230 V Availability: short notice Location: Röllbach

Year of construction: 2025, operating hours: 10 h, condition: new, functionality: fully functional, machine/vehicle number: 90300934, CLC 600 Docter machine Klsdpfx Asy D H Rdobljt Unwind 600 mm Rewind 600 mm

Condition: excellent (used), HUNKELER POST-PROCESSING SYSTEM (unwinding, punching, turning, rewinding) The line consists of: Position 1: UNWINDER HUNKELER UW4 G 7119 (M. No.: 659595 // Age: 2001) Position 2: CROSS and LENGTH CUTTER HUNKELER AM 520-W 7150 (M.No.: 1509697 // Age: 2004) Ksdpfx Aboxphnljlslt Position 3: TRANSFER STATION HUNKELER PU 520-W 7150 (M.No.: 2010062 // Age: 2008) Position 4: PUNCHING & PERFORATING UNIT HUNKELER DM 520-W 7152 (M.No.: 1509697 // Age: 2004) Position 5: TURNER HUNKELER WM 520-W (M.No.: 1509697 // Age: 2004) Position 6: CUTTER (TRANSVERSE and LENGTHWISE)HUNKELER CU 520-W 7154 (M.No.: 1509697 // Age: 2004) Position 7: CRISS CROSS DELIVERY ERTEC STSC-2 (S.No.: 34 // Age: 2008) Position 7.1: Brand new (never used) FOLDING UNIT FS4 7127 (M.No.: 1509697 // Age: 2004), can be used instead of the display Position 8: CRANE

Condition: excellent (used), Year of construction: 2024, machine/vehicle number: VP320C46009320240131V002, Max. media roller: 450 mm Max. media width: 320 mm Max. label roller: 310 mm max. label length: 1200 mm Max. media thicker: 0.3 mm Technical data Speed: max. 7.3 m/min Printing process: CMYK LED toner technology Print processor: 933 MHz, 2 GB, RAM 2G; HDD 40 G Warm-up time: under 28 seconds Interface: TCP/IP Web width: min. 210 mm, max. 330 mm Print width: max. 304 mm Print length: max. 1,200 mm Roll diameter: max. 450 mm (unwinding and rewinding) Roll weight: max. 47.2 kg (unwinding and rewinding) Printing material: 30 - 350 g/m² Resolution: 1200 x 2400 dpi Toner capacity: CMY: 18,500 pages A4 at 5% coverage Ksdjvf Inbjpfx Ablslt K: 26,000 pages A4 at 5% coverage Fixing: 480,000 pages A4 Service life Dimensions: 1400 x 850 x 1600 mm Weight: 350 kg Ambient: Temperature 20°C - 24°C, relative humidity 45 – 55% Connection value: 220 – 240 V AC, 50 – 60 Hz, 3.8 KW

Condition: used, Year of construction: 1995, working width: 1,300 mm, compressed air connection: 7 bar, Machine type: Coating and laminating line for coating, lacquering, and laminating from roll to roll using solvent-free adhesives. Manufacturer: NORDMECCANICA Type: Duplex Compact Model: Duplex C - SL1300 Year of manufacture: 1995 Web width: 650 to 1,310 mm Laminating width: Up to 1,300 mm Speed: Mechanical up to 300 m/min. Materials for coating: BOPP 15 - 80 µm PETP 12 - 30 µm LDPE, LLDPE 40 - 200 µm OPA 12 - 18 µm NYLON CAST 50 - 80 µm ALUMINIUM 15 - 40 µm PP CAST 60 - 150 µm SATIN PAPER 40 - 300 g/m2 Materials for lamination: BOPP 12 - 80 µm PETP 12 - 30 µm LDPE, LLDPE 20 - 200 µm OPA 12 - 18 µm NYLON CAST 20 - 80 µm ALUMINIUM 7 - 40 µm PP CAST 25 - 150 µm EVOH 12 - 20 µm CAST MATERIALS 25 - 200 µm SATIN PAPER 40 - 300 g/m2 Unwind A: Model 850 Roll change Automatic up to 300 µm Roll diameter 90 to 850 mm Roll weight Up to 900 kg Core diameter 70/76/150/152 mm Web tension 2.5 to 55 kg Coating thickness Up to 300 µm Pre-treatment Corona Unwind B: Model 850 Roll change Automatic up to 300 µm Roll diameter 90 to 850 mm Roll weight Up to 900 kg Core diameter 70/76/150/152 mm Web tension 2.5 to 55 kg Coating thickness Up to 300 µm Pre-treatment Corona Coating and laminating unit: For solvent-free adhesives. Coating section with 4 rollers, 2 of which are heated. Laminating section with 3 rollers. Rewind: Model 850 Roll change Automatic up to 300 µm Roll diameter 170 to 850 mm Roll weight Up to 900 kg Core diameter 150/152 mm Web tension 6 to 55 kg Coating thickness Up to 500 µm Ksdpfx Abjy Hgwpolslt Mixing and dosing unit: Manufacturer: DOPAG, Switzerland Model: Variomix Heating elements. 1 trolley for mounting transfer rollers for adhesives. Electrical connection: 220 / 3 x 400 V, 50 Hz Installed power: 180 kW Maximum current draw: 90 A Average power: 35 kW Compressed air connection: Input pressure: 7 and 10 bar Max. consumption: 400 l/min Water consumption: 2,000 l/h Various spare parts included. Standards: CE, CEE 89 / 392 ff. EN 60 204-1, SUVA Condition: Used (occasion) Availability: Immediately

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 116245, GM DC330 Digital die cutting machine/ converter Klodpfx Asylpvdjblot Compact footprint Unwind Web guide Web width 330 In / Outfeed nip for tension control Magnetic die station 200z / 25inch to support die plates of 50mm to 520mm Distortion/ Dispro factor to handle other tooth size plates Re Reg mark reader to support the printed web Die-cut offset possible inline Lateral/ Cross movement possible Waste rewinder Slitting station with manual 7 air pressured V-knives Upper and Lower rewind with options of clock or anti clockwise rotation Label or meter counting Core mandrels/spindles of 25mm, 38mm, 44mm and 76mm x 2 Cold foil Self adhesive lamination Laminator unwind and rewind Silencer to reduce noise when using the lamination Full Flexo station Varnish tray, Picking roller, Anilox roller, Print roller included GEW UV lamp Min 6 bar air pressure required Machine Weight 1200Kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, LabelCut R20s by Rotutech is offered for sale: a rotary label finishing and die-cutting system designed specifically for digital production environments requiring high precision, fast setup, and reliability, especially for short and medium runs. This solution is ideal as a complement to digital presses, optimizing the print → finish workflow with a compact footprint and very simple operation. The machine is in good working condition, ready for production, and can be inspected and tested without commitment to verify its performance and finishing quality. Main features: - Rotary finishing and die-cutting system for self-adhesive labels on roll - High-precision rotary die-cutting - Configured for continuous production with excellent stability - Quick and easy job changeovers - Ideal for variable data jobs and personalization - Unwinder with tension control - Rotary die-cutting station - Longitudinal slitting - Final label rewinder - Independent waste (matrix) rewinder Compatible materials: - Self-adhesive papers Kledoy Ry Uvjpfx Ablot - Common plastic films for labels (PP, PET, PETG, etc.)

Condition: used, Year of construction: 2011, Web Width: 850 mm 1. Unwinding and Infeed System - Unwinder with constant web tension control - Web guiding and stabilization unit - Electronically controlled infeed system with precise tension regulation - Complete drive package for accurate web handling 2. Rewinding System - Single-shaft rewinder, max. roll diameter: 1000 mm - Constant tension control for stable winding 3. Surface Treatment & Web Cleaning - Corona treatment unit for surface energy optimization (pre-print) - ACE single-sided contact roller web cleaner for dust and particle removal 4. Printing Units Flexographic Printing Section - 8 flexo printing units with: - Central impression drum - Removable ink drawer (excl. anilox rollers) - Optional flexo features: - Explosion-proof configuration (per print station) - Drum cooling system - Lightweight anilox rollers: - 5 units (195–300 lpi) with gear - 5 units (>300 lpi) with gear - 24 print sleeves with cams - 2 additional ink drawers (tray + rubber roller) - 1 trolley for ink drawers (3 slots: 2 in use + 1 reserve) Special Flexo Units - 1 cold foil trolley - 1 movable cold foil unit (can be positioned at any print station, rail-free design) Rotogravure Printing Section - 1 rotogravure station for front- or reverse-side printing, includes: - Reversing bar for reverse-side printing - Designed for PETROCOLL cold-seal coating (2.8–3.2 g/m² at 180 m/min on paper) - Rotogravure trolley for mobile positioning - Extended hot air drying system: - “Super Hood” with 32 high-efficiency blowers - Methane gas burner for heating - Integrated cooling unit - Electrostatic assist for ink transfer - 3 rotogravure print sizes (16”–26”) - Solvent ink viscometer - Pump and ink supply tank 5. Drying and UV Curing - 8 UV curing units, 22 kW each (one per print station) - Integrated cooling for UV lamps - Drum cooling for heat-sensitive substrates 6. Die-Cutting and Finishing Units - Rotary die-cutter, working width up to 530 mm - Base unit for die station - Trim removal system (up to 530 mm wide) - Matrix waste pressure system (limit: 530 mm) 7. Slitting Section Kjdpfx Abjy Ey Nielelt - Shear (scissor) slitting system - 6 Helios box knives with self-sharpening counter blades 8. Electronic Control & Inspection - OMET electronic register control for 8-color operation - Includes “gate” function for accurate registration - Vision system for real-time print inspection - Motorized E+L Elscan camera for high-resolution web monitoring 9. Safety and Compliance - Complete CE-compliant safety guards and emergency stop systems - Designed for ergonomic operation and rapid job changeovers

Year of construction: 2012, condition: excellent (used), functionality: fully functional, For sale: SMAG E-CUT S 330, a robust, versatile, and high-productivity roll-to-roll label finishing system. Designed for digital and conventional printing lines seeking flexibility, precision, and premium value-added finishes. This equipment is ideal as a complement to digital presses, enabling lamination, die-cutting, slitting, and rewinding in a single workflow. -> General data: - Model: E-CUT S 330 - Year of manufacture: August 2012 - First installation: February 2013 - Maximum web width: 330 mm - Maximum unwind roll diameter: 700 mm - Maximum speed: up to 35 m/min -> Configuration and Units: - Unwinder with ultrasonic web guide - Fully rotating flexo station - Lamination unit Kedpfx Ajyapy Ejblelt - Semi-rotary die-cutting with Z 160 magnetic cylinder - K&B GapMaster for precise adjustments - Corona treatment for improved adhesion - Longitudinal slitting unit with up to 10 knives - 2 rewinders - Matrix rewinder -> UV System: In 2017, an air-cooled Phoseon UV-LED lamp was installed, improving energy efficiency and reducing maintenance. -> Key strengths: - High industrial productivity and reliability - Great versatility for both digital and flexo jobs - Precise and stable die-cutting - Ready for a wide range of materials - Ideal for short to medium runs with quick job changeovers -> Equipment condition: - Machine in good working order, well-maintained and operational. - Available for inspection and testing without obligation. Reason for sale: Restructuring / change in production strategy.

Year of construction: 2007, condition: like new (used), Unwinder with paper splicing table Kjdpsy Hiagsfx Ablslt 6 letterpress printing units 1 flexo printing unit Semi-rotary die-cutting unit Inspection system with freeze frame Semi-rotary electronic advance Finishing section with independent electronic advance, comprising: Flat hot stamping unit Laminating unit Flatbed die-cutting / embossing unit Waste removal / rewinder with longitudinal slitting Various spare parts