Used Unwinder for sale (403)

Condition: excellent (used), functionality: fully functional, Manufacturer Julius, type AH 41 Inner coil diameter from 250 to 300 mm Max. width 295 mm With brake Fgedezzkl Depfx Apwog Good condition, ready for immediate use

Condition: good (used), Discharge – hydraulically expandable reel Reel drum: 800 mm long Fgodpfx Ajw Uqmvopweg Reel diameter: max 520 mm, min 485 mm Travel distance: approx. 200 mm Load capacity: 16,000 kg Drive: electric motor / gearbox Power: 4.0 kW Gearbox speed: 700 min-1 Manufacturer: Bauer

Condition: used, functionality: fully functional, The IBD Wickeltechnik industrial unwinding-shaft assembly is designed to support and controllably unwind rolls of web material. It incorporates an unwinding shaft supported by KL.S-series foot-mounted safety chucks, a CX.250.4 single-disc pneumatic brake, and forced cooling from a 24 V DC fan. The safety chucks allow for rapid shaft loading and removal, while the locked closure secures the journal during operation. The brake uses four pneumatic calipers, a 250 mm self-ventilating cast-iron disc, and a modular design that enables control of the braking torque through air pressure. The assembly is mounted on an adjustable, wheeled steel transport frame. Manufacturer: IBD Wickeltechnik GmbH Device type: industrial unwinding-shaft assembly with pneumatic brake Safety chuck model: IBD-KL.S.O.1800.0380.1.40.VT Safety chuck series: KL.S Safety chuck configuration: foot-mounted Maximum shaft and roll weight: 1800 kg Maximum safety chuck torque: 380 Nm Square journal range: 30–40 mm Triangular journal size: 36 mm Brake model: CX.250.04.28.0/V.24 Brake type: pneumatic, single-disc, air-cooled Number of brake calipers: 4 Brake disc diameter: 250 mm Disc material: cast iron Fgjdpfxozw Uilj Apwog Minimum braking torque: 6 Nm at 0.2 bar Maximum braking torque: 640 Nm at 6 bar Maximum permissible brake speed: 2500 rpm Fan voltage: 24 V DC Safety chuck serial number: 6800.37879.1/47.18 Brake serial number: 6800.37879.12/47.18

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Precision winding machine for films and web materials. Designed for consistent unwinding, guiding, and rewinding of roll materials. Integrated safety system with protective glazing, laser start position indicator (green), emergency stop switches, and pneumatic film guiding. Machine frame made of steel, electrically controlled drive. Ideal for production lines in coating or laminating technology. Fodpjxzuiyofx Apwjgg

Condition: good (used), Offer 25475 Manual double unwind/rewind reel Technical data: Fodpfszkhbnjx Apwjgg - Coil weight, left + right, up to approx. 1 t - Coil width, each side, up to approx. 300 mm - Coil inner diameter, approx. 380 to 500 mm - Coil outer diameter, up to approx. 1250 mm - Arbor height, approx. 750 mm - Space requirement, approx. W 1250 x D 900 x H 1300 mm - Weight, approx. 200 kg

Condition: excellent (used), Year of construction: 2011, The electricity and gas operated system enables surface treatment of plastic films by flame treatment. Field of application: e.g. Reverse foils in the solar industry MAIN COMPONENTS Fgsdpfx Aevydy Nepwsg • PSA turning roll and turret winder 2200/12 PSA W / ARW 2200/12 - Fyling Splice • Hill/Jungwirth burner unit for gas/air mixture • Suction • Erhardt + Leimer web edge control • Detect the OCS camera system for the error • Semket labeling system to identify the errors • GWK temperature control units for roller cooling SKL SP HC300 330KW

Year of construction: 2005, condition: used, Equipment Twin Multi Disc unwind station MTD-AWS-OWK • 2 MTD-AWS-OWK Combination unwinding station Fedpfxsc Ihxre Apwjgg • 1 MTD-ZSF-LI-MSD Stack pacer LAT • 1 LAT-2:1

Year of construction: 2000, condition: used, Mueller Martini 351.0412 unwinding station Fsdjc Ruydopfx Apwegg Built in 2000

Year of construction: 1999, condition: ready for operation (used), Built in: 1999 Working hours: 14.565 tsd. h Equipment: Fgjdpfxed N D Nhe Apweg 1 printroll unwinding station 0350.412-353

Year of construction: 1999, condition: ready for operation (used), unwinding station Fedpfodygu Sex Apwjgg Built in 1999

Year of construction: 1999, condition: ready for operation (used), Built in 1999 Fgjdpfxsd N D Ngj Apwjg Equipment: 4 printroll unwinding stations 0350.0416 • 43470 hours printoll 1 • 47630 hours printroll 2 • 46488 hours printroll 3 • 44802 hours printroll 4

Year of construction: 1996, condition: used, machine/vehicle number: 18073, Abwickler - Unwinder Stralfors Lasermax UW 52 (18073)Year 1996 Fodpfxoh Axqqo Apwogg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2014, condition: refurbished (used), Now available: Mueller Apparatebau unwinder 6802C available. Completely refurbed and like new. Direct available for your production. Fgodpfx Apshd Nxvowjg

Year of construction: 2007, condition: reconditioned (used), We have available a complete Mueller Apparatebau unwinder, cutter, merger and folding module to fold A4 documents. 6802 - Unwinder 6948 - Reading module - s/n 54977 used 6612 - CF Cutter - s/n 59028 used 6950 - Merger - s/n 61778 used Fgjdpfxsinifhj Apwsg 6895 - Accumulator - s/n 58225 used 6626 - Folder up-up - s/n 58903 used 6822 - Folder STOPP function s/n 58617 used 6896 - Transport module - s/n 55747 used 6815 - Transport module STOPP function - s/n 55728 used We do have other Mueller Apparatebau modules available. Let us know what you are looking for!

Condition: good (used), Maximum inner roll diameter: 1300 mm Fjdpfjik E R Uox Apwjgg Minimum inner mandrel diameter: 700 mm Maximum roll width: 700 mm

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Fgsdjud U Sfepfx Apwsg Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film reel 0.37 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - Gear motor LENZE with brake to drive the film roll (0.37 kW) - Electrical system not ready for operation, see pictures Space requirement L x W x H approx. 1000 x 1000 x 1900 mm net weight 360 kg good condition

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film roll 0.37 kW Motor power - drive of the flat film into the vacuum shaft 0.25 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - LENZE geared motor with brake to drive the film roll (0.37 kW) - LENZE geared motor with brake to drive the flat film into the vacuum shaft (0.25 kW) Space requirement L x W x H 1900 x 1300 x 1900 mm net weight 580 kg Fgodpfx Apeu H R Iqswsg Good condition

Condition: used, offer consists of: stitching wire unwinder for 15kg roll without wire We can also organize the following for you: Fjdjw Ewzvjpfx Apwegg packaging, loading, transport ( by ship or plane) including customs

Condition: excellent (used), Used textile spreader BKR M300, with floor loader for fabric rolls, table length 8 meters, fully conveyorized, width 2.04 meters, working width 1.80 meters. In good condition. Fgjdpfx Apjx Rdw Uowsg

Condition: new, Year of construction: 2025, functionality: fully functional, New unwinding reels ready for delivery capacity 500Kg; 1,000kg; 2,000kg Fgedpfx Aewhmmyepwog

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul Fgsdpfezzz N Hsx Apwjg - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, A used horizontal form, fill, and seal machine (HFFS) from the DEAPHS series is for sale. It is designed for the automatic production, filling, and sealing of pouches made from flat film. ### Current Machine Condition The machine is currently set up for the production of 4-side seal pouches. The machine forms the pouch directly from flat film, takes over the filling process – in conjunction with a suitable dosing system – and then automatically seals the pouch. The DEAPHS series is fundamentally modular in design and can be adapted for other pouch types and applications, depending on the existing or additional equipment, for example: - 3-side seal pouches / sachets - 4-side seal pouches - Doypack / stand-up pouches Adaptation to other pouch types depends on the format, product, and required machine components and is not part of the current setup. ### Possible Applications Depending on the dosing system used, the machine is suitable for packaging, for example: - Powdered products - Granules and granular products - Food products - Animal feed - Cosmetic products - Technical and other non-food products - Single-serve packs, sample sizes, and samples Different dosing and feeding systems can be used for different products. ### Machine Equipment - Independent film unwinding shaft - Pouch bottom sealing - Pouch bottom former - 3 horizontal sealing units - 2 vertical sealing units - Servo-controlled film/pouch feed - Mechanical pouch cut - Vacuum pouch opening - Photoelectric sensor control for printed film - LCD touchscreen display - Panasonic PLC - Servo film drive The separate film unwinding system enables controlled film tension and adjustment to different film widths and pouch formats. ### Possible Dosing Systems Depending on the application, the machine can be combined with the following dosing systems, among others: - Auger dosing - Volumetric cup filler - Multi-head combination weigher - Piston filler - Pump filler / liquid dosing, e.g., Hibar Availability and scope of delivery of the respective dosing systems can be requested separately. ### Technical Data Machine dimensions: approx. 5,500 × 1,100 × 1,400 mm (L × W × H) Net weight: approx. 2,000 kg Power supply: 380 V / 3 phases / 50 Hz Connected load: approx. 6.5 kW Air consumption: approx. 0.23 m³/min ### Installed Components / Manufacturers Components from, among others: Mitsubishi, Panasonic, Autonics, ABB, Airtac, and SMC Suitable packaging films, as well as other dosing, feeding, and peripheral equipment, can also be offered depending on the application. Inspection of the machine is possible by appointment. Fgodpfxoum R Ezo Apwjg Further information on pouch formats, working widths, possible dosing systems, and scope of delivery can be provided upon request.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We have a Buhrs - W+D BB700 16K S2 year 2015 servo envelope inserting system available. 12 station base system!!!!! The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2015 Configuration: - 12 station base - 11x RF2 rotary feeder (other feeders possible) - Divert bin 1, 2 - Conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: Fgedexyfmgepfx Apwsg - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: MB400-2026, total width: 2,200 mm, total length: 9,000 mm, total height: 2,200 mm, cutting length (max.): 530 mm, type of input current: three-phase, compressed air connection: 8 bar, power of the servo motor: 3,000 W, power: 15 kW (20.39 HP), overall weight: 5,500 kg, input voltage: 380 V, installation height: 2,200 mm, MASTER BAG 400 – MODEL 2026 High-Speed Automatic Paper Bag Making Machine The MASTER BAG 400 Model 2026 is a fully automatic high-speed paper bag making machine designed for manufacturers seeking productivity, precision, automation, and sustainable packaging solutions. Combining advanced servo technology, PLC control, and intelligent automation, this machine delivers reliable performance for food packaging, bakery packaging, pharmacy packaging, grocery packaging, retail packaging, and takeaway packaging applications. This Automatic Paper Bag Machine produces high-quality flat and gusset paper bags with excellent accuracy and consistency. It is an ideal investment for companies looking to replace plastic packaging with eco-friendly and recyclable paper packaging solutions. The MASTER BAG 400 serves as a complete Paper Bag Production Line and Industrial Paper Bag Manufacturing Equipment solution, suitable for supermarkets, bakeries, pharmacies, restaurants, coffee shops, delicatessens, food service providers, and retail stores. KEY FEATURES • Fully Automatic Operation • High-Speed Production up to 600 Bags/Min • Servo Controlled Paper Bag Machine • PLC Controlled Paper Bag Machine • CE Certified Design • Heavy-Duty Industrial Construction Fgodpfx Apju I R Duewsg • Low Maintenance Requirements • Energy-Efficient Operation • Water-Based Glue System • Automatic Web Guiding • Intelligent Tension Control • Fast Job Changeover • High Output Production System TECHNICAL SPECIFICATIONS • Paper Tube Length: 100–450 mm • Paper Bag Width: 50–260 mm • Bag Mouth Height: 15–20 mm • Insert Size: 20–120 mm • Paper Thickness: 40–80 gsm • Production Speed: 100–600 pcs/min • Paper Roll Width: 800 mm • Roll Diameter: Max. 1000 mm • Air Pressure: 0.6–1.2 MPa • Installed Power: 7 kW • Machine Weight: 1700 kg • Dimensions: 4200 × 1500 × 1800 mm STANDARD EQUIPMENT Automatic Unwinding Device, Pneumatic Air Shaft Ø76 mm, Pneumatic Control System, Magnetic Powder Brake, Tension Controller, Web Guide Controller, Feeding Roller System, Water-Based Glue Tray, Bag Forming Device, Mold Fixing Device, Gusset Forming Unit, Printing Registration Sensor, Traction Roller, Precision Cutting Knives, Electric Cabinet, Servo Drive System, Traction Servo Motor, PLC Control System, AC Contactors, and Industrial Sensors. APPLICATIONS Pharmacy Paper Bags, Bakery Bags, Bread Bags, Sandwich Bags, Snack Bags, Fast Food Bags, Food Service Bags, Fruit & Vegetable Bags, Grocery Bags, Retail Shopping Bags, Takeaway Packaging Bags, Kraft Paper Bags, Eco-Friendly Paper Bags, Sustainable Paper Bags, Recyclable Packaging Bags, Food Packaging Bags, Medical Packaging Bags, Supermarket Bags, Restaurant Packaging Bags, Coffee Shop Bags, Delicatessen Bags, Organic Food Packaging Bags, Custom Printed Paper Bags, and Promotional Paper Bags. INDUSTRIES SERVED Food Packaging Industry, Bakery Packaging Industry, Retail Packaging Industry, Medical Packaging Industry, Grocery Packaging Industry, Restaurant & Takeaway Packaging, Coffee Shop Packaging, Supermarket Packaging, Sustainable Packaging Industry, and Paper Converting Industry. Paper Bag Making Machine, Automatic Paper Bag Machine, High Speed Paper Bag Machine, Food Packaging Machine, Bakery Bag Machine, Pharmacy Bag Machine, Grocery Bag Machine, Sandwich Bag Machine, Snack Bag Machine, Retail Paper Bag Machine, Sustainable Packaging Equipment, Eco-Friendly Packaging Machine, Kraft Paper Bag Machine,

Condition: used, Second-hand machine In all operating modes, the materials are fed from the front through the roller gap and joined together by pressure Standard number of axes: Material unwinding 2 Silicone paper unwinding 1 Roller gap adjustment 0–52 mm Pressure 0.3–0.8 N/mm Processing speed maximum 5 m/min Slow operation 0.6 m/min Reverse operation 0.6 m/min Noise level > 70 dB(A) Material data: Max. width 1400 mm Max. material diameter: Unwinding diameter 200 mm Silicone paper take-up diameter 150 mm Max. panel thickness 50 mm Inner diameter of roll core: 76.2 mm Power supply 230 V Fsdpfxeznk A No Apwegg Availability: short notice Storage location: Röllbach