Used Universal Gear Hobbing Machine for sale (70,766)

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 280 mm max. module: 7 weight of the machine ca.: 13 t table turning speeds: 100 U/min table diameter: 250 mm min. number of teeth: 4 hob turning speeds: 1500 U/min Csdpjyzxbcefx Ap Djhd max. hob diameter: 160 cutter length max.: 230 mm Machine in good condition. Available 01.08.2024 *

Condition: ready for operation (used), Year of construction: 1981, Stankoimport gear hobbing machine 5K328A Year of manufacture: 1981 Max. diameter of the gear wheel: - with counterbeam: 800 mm - without counterbeam: 1250 mm Max. module: 12 mm Cjdpfszq Sq Hex Ap Dohd Max. width of the gear wheel: 560 mm Min. number of teeth: 20 Helix angle: +/- 60 degrees Table diameter: 935 mm Max. weight on the table: 2000 kg Hob arbor taper: Morse 6 Hob arbor speed range: 32 - 200 RPM Working feeds: - vertical: 0.5 - 5.6 mm/rev - radial: 0.22 - 2.6 mm/rev - tangential: 0.07 - 2.58 mm/rev Main electric motor power: 10 kW Net weight of the machine: 14 tons Change gears, arbors, and support available! Video of the machine in operation available!

Condition: used, Year of construction: 2007, x-travel 900 mm Csdowzypujpfx Ap Dohd y-travel 300 mm z-travel 1000 mm control Siemens 840D max. workpiece dia. 1600 mm max. module 20 mm tip circle diameter 350 mm weight of the machine ca. 33500 kg dimensions of the machine ca. 10,53 x 6,38 x 4,68 m Technical details: - x-travel: 900 mm - y-travel: 300 mm - z-travel: 1000 mm - Control system: Siemens Sinumerik 840D - Workpiece diameter - max.: 1600 mm - Module - max.: 20 mm - Head circle diameter: 350 mm - Milling spindle diameter: 375 mm - Total power consumption: 80 kVa - Machine weight approx.: 33500 kg - Space requirement approx.: 10.530 x 6.375 x 4.680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in 1/min: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - Motor milling head M 2 - Milling mandrels - Oil cooler - Technical documentation

Condition: used, Year of construction: 2008, Maximum workpiece outer diameter 3420 mm workpiece diameter nominal 2400 mm max. module 30 mm control Siemens Sinumerik 840 D Minimal workpiece - internal diameter 630 mm Maximum workpiece outer diameter 3420 mm Maximum workpiece tooth width 600 mm max. rim strength 500 mm Maximum permissible head circle diameter 440 mm Hob/disc cutters – Maximum length 90 mm Milling arbour diameter 80 mm milling head -swivable +15/-15 Grad workpiece table outer diameter 1870 mm Workpiece table bore 600 mm Workpiece table – Maximum permissible load 300 kN rapid traverse X-axis 3000 mm/min rapid travel z-axis 4000 mm/min Chodpfx Aeztz Rusp Djd Workpiece table speed 0-6 U/min Tools speed 18-180 U/min weight of the machine ca. 38 t dimensions of the machine ca. 8,41 x 9,05 x 5,19 m total connected load 100 kVA Equipment/accessories: - IFK2 internal milling head - Milling arbor with spacer discs - Chip conveyor - Oil mist extraction - Dry machining only - Technical documentation

Condition: used, Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 1,600 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 90 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 530, workpiece weight (max.): 3,000 kg, total height: 3,600 mm, total length: 8,017 mm, total width: 4,905 mm, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, rotational speed (max.): 10 rpm, overall weight: 35,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 28 W, spindle nose: HSK63A, number of slots in tool magazine: 60, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, Equipped with: - 5 axes Cedszgbdzspfx Ap Dehd - Automatic pallet changer system - High-pressure coolant system running through the spindle with paper filter and 1000-liter tank - Automatic tool presetting system by BLUM - CE marking

Condition: used, Universal tool and cutter grinding machine DECKEL, Type FP 3 Serial No. 2201 - 5240, Year of manufacture 1981 Control system Type 2201, Serial No. 5594 Travel distances: X: 500 mm, Y: 300 mm, Z: 380 mm (manual adjustment and without bellows) Travel distances: X: 490 mm, Y: 290 mm, Z: 340 mm (with feed) Table size: 800 x 420 mm Spindle mount: SK 40 - S20x2 Tailstock travel: 100 mm Spindle speed: 25 - 2500 rpm, 18 steps Feed rate: Feed 5 to 500 mm/min. Chodpfx Aj Ahzl Djp Ded Rapid traverse speed: approx. 1200 mm/min. Motor power, spindle drive: 2/4 kW, pole-switching Power connection: 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN Type TNC 111 - Stepless feed in the X, Y and Z axes - Mechanical handwheels for all three axes - Spindle speed via 2 motor speeds and 18 gear stages - Vertical milling head, swiveling and extendable 200 mm horizontally - Fixed angular table 800 x 420 mm - Coolant system with mechanical pump in the machine base - Central lubrication - Control cabinet located beside the machine - Protective enclosure with hinged doors around the machine table - Original chip tray for attachment to the machine base Space requirement L x W x H: 1600 x 1600 x 1750 mm Weight: 1400 kg Good condition

Condition: used, Year of construction: 1994, Used CNC gear hobbing and milling machine Pfauter P800 / 1200 Chjdpjz H Nuxsfx Ap Ded For gear milling of spur and bevel gears.

Condition: good (used), max. wheel diameter 600 mm max. module 6 range L-W-H 2540 x 1500 x 1920 mm table diameter 160 mm weight of the machine ca. 3,6 t High-performance gear hobbing machine Tooth helix angle 15° Tooth width 270 mm Wheel diameter 620 mm Tooth helix angle 30° Tooth width 250 mm Wheel diameter 610 mm Tooth helix angle 45° Tooth width 200 mm Wheel diameter 500 mm Tooth angle 60° Tooth width 100 mm Wheel diameter 450 mm Maximum cutter diameter 105 mm Csdjy E Twgjpfx Ap Dshd Maximum cutter width 115 mm Clamping table diameter 420 mm Bore of clamping table 75 mm Depth of bore below table surface — mm Diameter of workpiece clamping wheel 450 mm of clamping mandrel 30 mm of milling mandrels 22–27–32 mm

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm max. module 6 Overall size 300x310x245 cm Codpfx Aou A I Elep Djhd weight of the machine ca. 5,0 t Specifications: - Maximum wheel diameter: 400 mm - Min. module: 1 - Max. module: 6 - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter strut: 400 mm - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. tooth helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50-200 rpm - Axial feed continuously adjustable: 0.2-10 mm/rev - Tangential feed continuously adjustable: 0.1-5 mm/rev - Radial for spur gears: 0.1-4 mm/rev - Radial for worm gears: 0.025-1 mm/rev - Rapid traverse axial: 500 mm/min - Rapid traverse tangential: 250 mm/min - Radial for spur gears: 400 mm/rev - Radial for worm gears: 100 mm/rev - Motor power: 7.4 kW Gewicht - Machine 5000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Dimensions - Length with chain drive (normal) 2950 mm with DC drive 3350 mm - Width: 3100 mm - Height Machine: 1980 mm Electrical cabinet approx.: 2200 mm Machine with DC drive approx.: 2150 mm

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 130 mm max. module: 3 total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,3 x 2,5 x 2,17 m A well-preserved CNC hobbing machine Vertical for shafts and wheels With tailstock Also suitable for hard milling (good for steering pinion) Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm * 2500 mm * 2170mm Accessories : Hydraulical workpiece clamping Automatic loading system Magnetic chip conveyor * Chsdoy Nk Hgepfx Ap Dod

Condition: used, Year of construction: 1987, max. wheel diameter 4400 mm gear width 645 mm Cjdjyqt S Hepfx Ap Dohd max. module 35 Control Siemens main drive motor 37 kW table diameter 2500 mm ical angle +/- 30 ° workpiece weight 40000 kg total power requirement 142 kVA weight of the machine ca. 75 t Partial overhaul 2006 5 controlled axes a, c, x, y, z Max. gear outer diameter 3000 mm Max. outer diameter for internal gears 3560 mm Max. module with hobs 30 Max. module with internal form cutters 18 Min. gear diameter 900 mm Axial feed travel 1800 mm Largest axial slide travel 1800 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2007, max. workpiece diameter 2800 mm workpiece diameter nominal 2400 mm max. module 30 mm control Siemens Sinumerik 840 D Minimal workpiece - internal diameter 630 mm Maximum workpiece outer diameter 3800 mm Maximum workpiece tooth width 600 mm Chedpfxow Rf S So Ap Dsd max. rim strength 50 mm Maximum permissible head circle diameter 440 mm Hob/disc cutters – Maximum length 90 mm Milling arbour diameter 80 mm milling head -swivable +15/-15 Grad workpiece table outer diameter 2500 mm Workpiece table bore 800 mm Workpiece table – Maximum permissible load 400 kN Rapid traverse on the X and Y axes 3000 mm/min rapid travel z-axis 4000 mm/min Workpiece table speed 0-4 U/min Tools speed 18-180 U/min Cutter arbor cone HSK-B160 weight of the machine ca. 57 t dimensions of the machine ca. 10,7 x 8,1 x 4,85 m total connected load 100 kVA Equipment/Accessories: - IFK2 internal milling head - Milling spindle with spacer discs - Chip conveyor - Oil mist extraction - Wet and dry machining possible - 2 chip conveyors - Technical documentation

Condition: used, Year of construction: 1980, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Codpfxe Aa Aybe Ap Djhd Travel ranges X-axis: 500 mm Y-axis: 500 mm Z-axis: 400 mm Spindle and tool holder Speed range: 30–2,240 rpm Tool holder: SK 40 Feed rate and rapid traverse Feed rate range: 1–750 mm/min Rapid traverse: 1,500 mm/min Work table Table clamping surface: 400 × 800 mm Control system Control system: Heidenhain TNC 131 Performance data Total power consumption: 7.8 kW Machine weight: approx. 1.8 t Dimensions Space requirement: approx. 2.1 × 1.6 × 2.2 m Axes and clamping Feed drives: separate drives for each feed spindle Axis clamping: automatic hydraulic Release: working axis automatically released Manual operation: all axes can be released EQUIPMENT Swiveling device for vertical head Coolant system Separate drives for each feed spindle Automatic hydraulic clamping of all axes Heidenhain TNC 131 control system

Condition: good (used), functionality: fully functional, Net price: €6,800 Internal article number: 26096 Universal tool grinding machine Chodpfxj Ahhl Ns Ap Dsd Deckel S11 Includes dividing head (without Deckel brand dividing head) Includes documentation (electrical circuit diagram, operating manual, parts list) The machine is fully functional and can be inspected under power by appointment in our heated warehouse, which has over 500 m² of space.

Condition: used, Year of construction: 1980, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Universal bed-type milling machine Machine weight: approx. 11 tons Travel distances X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 630 mm Spindle and tool holder Spindle taper: SK 50 Speed range: 20–2,000 rpm Horizontal milling spindle: SK 50 Vertical milling spindle: SK 50 Cedj Aa Ahrspfx Ap Dshd Feed rate and rapid traverse Feed rate: 10–6,000 mm/min Rapid traverse: 6 m/min Work table Table load: max. 5,000 kg Control system Control system: Philips NC 6664 Axes: 4 Program memory: available Rotary table Rotary table: NC-controlled Diameter: 630 mm Electrical data Total power requirement: 18 kW Control cabinet Control cabinet dimensions: 1,800 × 530 × 2,000 mm Dimensions Space requirement: approx. 4.6 × 2.9 × 2.62 m EQUIPMENT NC-controlled rotary table Hydraulic tool clamping Coolant system Chip conveyor Horizontal milling spindle Vertical milling spindle Separate control cabinet Safety emergency stop Important note: The machine vice, if visible in the pictures, is not included in the scope of sale and delivery!

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 200 mm gear width: 250 mm max. module: 3 min. module: 0,5 total power requirement: 45 kW weight of the machine ca.: 6,5 t Chodjy Nk Idepfx Ap Djd dimensions of the machine ca.: 4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation *

Condition: refurbished (used), Year of construction: 1997, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,250 mm, controller model: Siemens 840 C, spindle speed (max.): 4,000 rpm, The machine has been completely overhauled! TECHNICAL DETAILS Travel range, X-axis: 1,500 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,250 mm Speed range: 10–4,000 rpm Spindle power: 40 kW Spindle interface: HSK-A 100 Pallet size: 1,000 × 1,000 mm Pallet speed: 1–500 rpm Pallet load: max. 2,000 kg Tool magazine: Chain magazine Tool positions: 161 MACHINE DETAILS Control system: Siemens 840 C Overall dimensions: 8,500 × 4,800 × 4,800 mm Chedpfx Ao Agftbep Dsd EQUIPMENT Pallet changer Horizontal and vertical automatic head Rotary table Chip conveyor Paper filter

Condition: repair required (used), Year of construction: 1996, functionality: limited functionality, machine/vehicle number: 500 050, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, torque: 82 Nm, controller manufacturer: Grundig / Heidenhain, controller model: MillPlus, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 50 mm, workpiece weight (max.): 200 kg, total height: 2,200 mm, total length: 2,200 mm, total width: 1,800 mm, table width: 500 mm, table height: 800 mm, table length: 700 mm, table load: 200 kg, rotary table diameter: 500 mm, overall weight: 3,000 kg, spindle speed (min.): 20 rpm, Deckel Maho DMU 50 T – CNC universal milling machine (year of manufacture 1996) For sale is a CNC universal milling machine, Deckel Maho DMU 50 T, equipped with the proven MillPlus control system. This machine is ideally suited for toolmaking, the production of single parts and small series, as well as for training workshops. Key features: Control system: MillPlus (Deckel Maho) Chsdpfez D Ab Tsx Ap Dsd Travel distances: X = 500 mm / Y = 400 mm / Z = 400 mm Table: Swiveling round table for flexible 5-axis machining Equipment: Full enclosure with sliding doors and ergonomic control panel The machine has a fault in the X-axis. When moving, it triggers the emergency stop. Since the machine has not been used since 2018, repairing it is not worthwhile for us. Sales and transport conditions (Incoterms): Sales condition: EXW (Ex Works / Ex Location) Dismantling & Loading: The dismantling, removal from the building, loading, and transport must be fully organized and carried out by the buyer (at their own cost and risk). Dismantling can also be carried out for a fee. Various accessories included. The machine can be inspected on site by appointment.

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm Chsdpfxov T Nqao Ap Ded max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 30, DMG MORI DMU 50, 3rd Generation 5-Axis Universal Machining Center Manufacturer: DMG MORI Model: DMU 50, 3rd Generation Year of Manufacture: 2018 Control System: Siemens 840D sl Operate with CELOS Chsdpfx As Agnykop Djd Operating Panel: 21.5-inch ERGOline Multi-Touch Technical Data Machining: 5-axis simultaneous machining NC rotary table Travel distances: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm Swivel/Rotary Axes: B-axis: -35° to +110° C-axis: 360° Worktable: Clamping area: Ø 630 × 500 mm Maximum table load: 300 kg Main Spindle: speedMASTER motor spindle Spindle speed: 20–15,000 rpm Tool interface: SK40 Spindle power: 21 kW (40% duty cycle) Continuous power: 16 kW (100% duty cycle) Tool Changer: Tool magazine: 30 positions Tool interface: SK40 Feed Rate: Rapid traverse X/Y/Z: 42 m/min Special Equipment Internal coolant supply (IKZ) with 40 bar Coolant system with 600 liter tank Paper band filter system including cabin roof Chip conveyor with scraper chain Double-stage filter, 25 µm, manually switchable Blow-off air through spindle center, selectable via M-function Renishaw PP60 optical infrared workpiece measuring probe (OMP60) Heidenhain TT160 tool measurement Tool length and diameter measurement Tool breakage detection 3D quickSET for checking and correcting machine kinematics ATC – Application Tuning Cycle Electronic handwheel Flushing gun for chip removal Total spindle hours: approx. 18,600 New spindle replaced in 2021 at approx. 5,800 hours

Condition: good (used), Year of construction: 1991, weight of the machine ca. ca. 6 t The design of the basic machine is characterised by the following features: Csdpfx As Agw R Nep Djhd - horizontal position of the workpiece spindle; vertical position of the milling spindle or milling head of the milling head - The workpiece is held between the workpiece headstock (left) and the tailstock (right). - the radial slide is mounted on the base (X-axis) - the axial slide moves on the radial slide (Z-axis) - the shift milling head is equipped with an automatic angle adjustment (A-axis); the shift slide (Y-axis) moves diagonally to the workpiece diameter - CNC controlled - IBH control - loading device - Many accessories Technical data: - largest milling module with hobs according to DIN 8002: 4.5 mm - largest milling module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - max. workpiece diameter for manual loading: 200 mm - max. workpiece diameter for automatic loading: 150 mm - maximum workpiece length: 400 mm - largest / smallest milling cutter diameter: 102/40 mm - maximum cutter length: 230 mm - largest / smallest milling arbor diameter (standard): 32/16 mm - Axial slide path = largest milling length Z-axis: 300 mm - Radial slide path X-axis: 140 mm - Milling cutter shift path Y-axis: 100 mm - Milling stock path W-axis: 420 mm - Swivelling angle of shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 1ß0 - 150 mm - Y-axis (end face of milling spindle): 50 - 230 mm - W-axis (face of tailstock spindle): 165 - 585 mm - Milling cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed speeds: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min

Condition: excellent (used), Year of construction: 2002, max. wheel diameter 350 mm gear width 230 mm max. module 8 Chjdpjy D T Upsfx Ap Djd min. module 1 Control Siemens 840 weight of the machine ca. 10,5 t dimensions of the machine ca. 4,5 x 2,5 x 3,0 m Loading unit, very good condition.

Condition: used, Year of construction: 2003, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: Universal Milling Machine Model Series: MF1 Machine Weight: approx. 0.95 t Travel Ranges X-axis travel: 760 mm Y-axis travel: 290 mm Z-axis travel: 370 mm Quill stroke: 127 mm Work Table Table size: 750 × 230 mm Spindle and Milling Head Speed range: 60–4,200 rpm Spindle taper: SK 30 Overhang: 171–476 mm Quill feed: 0.04 / 0.08 / 0.13 mm/rev Quill feed stages: 3 Milling head: swiveling and tilting Spindle speed control: stepless Feed Feed range X-axis: 19–890 mm/min Feed X-axis: steplessly adjustable Rapid traverse X-axis: available Performance Data Total power consumption: 2.4 kVA Dimensions Space requirement: approx. 2.05 × 1.63 × 2.07 m EQUIPMENT Swiveling and tilting milling head with quill feed Chsdpfxs Aa Axko Ap Dod Automatic quill feed Pneumatic tool clamping Digital position display Steplessly adjustable spindle speed Feed in X-axis with rapid traverse Extensive standard accessories

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 18378, operating hours of spindle: 30,620 h, For sale is a highly precise and dynamic 5-axis CNC universal machining center from the reputable manufacturer DECKEL MAHO, model DMU 80 P hi-dyn, manufactured in the year 2000. This machine comes from the proven "hi-dyn" series (High Dynamics), which is characterized by extremely fast rapid traverse speeds, high acceleration values, and a robust portal design. It is ideally suited for highly precise 5-sided and 5-axis simultaneous machining in demanding tool, mold, and prototype construction. The machine is in operational condition and impresses with the combination of large travel ranges, an NC swivel rotary table, and stable machine kinematics. Equipment: - Rotary table - mounted special clamping device Chedpfo Afphiex Ap Dod - 2 precision vises - viewing window - Heidenhain TNC426 control unit - 60-position tool changer SK40 - chip conveyor - separate coolant system with band filter Attractive offer – flexible & worry-free We offer you not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together we will find the right solution. On request, we can also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Year of construction: 2022, operating hours: 1,500 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 0070, We are selling a virtually new vertical universal brush tufting machine. The machine was manufactured by WOMAtec in 2022 and has seen very little use. Technical specifications: Type: DANY 1.0 Stroke: 70 mm Filament length: max. 150 mm Filaments: synthetic, bristles, and natural fibers, wire filaments and abrasive filaments Filament box: 1 color, needle dividing system Tufting tool: none Codpfxozzwxwo Ap Dshd Performance: approx. 100 cycles per minute Operating mode: intermittent operation and continuous operation Operation via foot switch Consisting of: ■ solid, welded steel frame ■ powerful main drive ■ wire spool and wire feed ■ filament box with pressure plate ■ durable tufting tool ■ loop tufting system with needle divider ■ adjustable table for flat brushes Table for cup or roller brushes available upon request ■ painted in Prussian blue RAL 5010, light gray RAL 7035