Used Universal Gear Hobbing Machine for sale (92,685)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1130, table diameter: 250 mm, wheel diameter: 280 mm, spindle speed (max.): 1,500 rpm, TECHNICAL DETAILS Max. wheel diameter: 280 mm Max. module: 7 Table speed range: 100 rpm Table diameter: 250 mm Centre distance: 15 - 285 mm Max. axial travel: 350 mm Milling Head Drive power: 16 kW Min. number of teeth: 4 Cutter speeds: 1,500 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Tangential travel: 200 mm Tangential speed: 3,000 mm/min Swivel angle: ± 45° MACHINE DETAILS Njdsw T R Ahjpfx Aa Eedf Approx. machine weight: 13,000 kg Supply voltage: 400 V Mains frequency: 50 Hz Connected load: 35 kVA

Condition: good (used), Year of construction: 1984, max. wheel diameter 400 mm gear width 275 mm max. module 6 Ndjdpfx Aasv T Nqaj Eef weight of the machine ca. 5,5 t

Condition: refurbished (used), functionality: fully functional, Universal Profile Hobbing and Thread Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Max. workpiece diameter over saddle: 250 mm Max. workpiece diameter over bed guideway: 500 mm Spindle bore: 102 mm Tailstock quill travel: 100 mm Main motor: 4.0 kW Cross-feed motor (X-axis): 4.3 kW Longitudinal feed motor (Z-axis): 3.8 kW Electrical configuration Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic control (PLC) for fixed machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Standard accessories: • Standard thread milling attachment ApG • Max. milling diameter: 150 mm • Spindle taper: Morse 3 • Max. module for hobbing: Module 3 • Min./max. number of teeth for hobbing: 4–50 Options: • Hobbing attachment ApFW Hobbing of parallel and helical profiles up to module 7 Max. milling diameter: 150 mm Spindle taper: Morse 4 • Heavy-duty thread milling attachment ApGS Nedpfx Aasw Hquxs Eodf Hobbing of parallel and helical profiles up to module 5 Max. milling diameter: 150 mm Spindle taper: Morse 4

Condition: ready for operation (used), Year of construction: 1978, operating hours: 4,500 h, functionality: fully functional, workpiece weight (max.): 2,000 kg, rotary table diameter: 1,020 mm, table diameter: 1,020 mm, feed rate X-axis: 8 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 2 m/min, total length: 4,500 mm, gear diameter: 1,550 mm, total height: 3,300 mm, total width: 2,100 mm, input current: 50 A, input frequency: 50 Hz, workpiece diameter (max.): 1,580 mm, milling spindle length: 380 mm, type of input current: three-phase, milling length: 600 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 28 rpm, grinding spindle motor power: 11,000 W, outer diameter: 1,580 mm, overall weight: 16,000 kg, rotational speed (max.): 200 rpm, rotational speed (min.): 28 rpm, table load: 2,000 kg, mount diameter: 235 mm, helix angle: 45 °, tool diameter: 235 mm, Gear Hobbing Machine MODUL ZFWZ 1250 The MODUL ZFWZ 1250 is a heavy-duty gear hobbing machine designed for high-precision cutting of large spur and helical gears. Manufactured by VEB Werkzeugmaschinenkombinat “7. Oktober” Berlin – Kombinatsbetrieb MODUL (Germany), this machine is renowned for its robust construction, long service life, and reliable performance in demanding industrial applications. Ndsdsx I Ntpepfx Aa Esf The machine is upgrated for machining gears with a maximum workpiece diameter of 1550 mm. It features a gear hobber diameter of 235 mm, with a cutting width of 600 mm, and supports gear modules from 2 to 16, making it suitable for a wide range of gear sizes. The hobbing spindle operates with infinitely variable speed control between 28 and 200 rpm, allowing precise adjustment to different materials and cutting conditions. The machine is equipped with a tilting stand (left/right ±45°) for machining helical gears. The main drive motor is inverter-controlled with a power of 11,000 W (11 kW), supported by a 12.5 kW rapid traverse motor, ensuring both high cutting performance and efficient non-cutting movements. The large rotary table with a diameter of 1020 mm provides excellent stability for heavy workpieces. With a total machine weight of approximately 16,000 kg and rigid cast-iron construction, the ZFWZ 1250×14I delivers excellent vibration damping and machining accuracy. Power supply is 3-phase AC, 380 V, 50 Hz. Key Features -Gear hobbing for spur and helical gears -Maximum gear diameter: 1550 mm -Gear hobber diameter: 235 mm -Module range: 2–16 -Cutting width: 600 mm -Infinitely variable spindle speed: 28–200 rpm -Tilting stand: ±45° -Heavy-duty industrial design -Extended driven shaft for large gears -Inverter-controlled main motor (11 kW) -Expanded set of change gears Applications: -Heavy gear manufacturing -Large transmission components -Industrial gear production and refurbishment

Condition: excellent (used), Max. Wheel Dia: 1600 mm Min. wheel Dia: 800 mm Gear width: 560 mm Max. module: 16 Min. Module: 4 Table dia: 1350 mm Table load cap: 7000 Kg Machine weight: ca. 18 Tonnes Nedpfxjv Igc Ns Aa Eodf Machine with change gear, arbors, fixtures set Machine is in excellent condition

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. Nsdsw Al U Espfx Aa Ejdf For more information, please contact us.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, gear diameter: 180 mm, travel distance Z-axis: 300 mm, shaft length: 640 mm, TECHNICAL DETAILS Wheel diameter - max.: 180 mm Module - max.: 4 Carriage travel axial (Z-axis): 300 mm Shaft length - max.: 490-640 mm Y-axis travel: 33 - 193 mm Ndedpfow T R Abjx Aa Eof MACHINE DETAILS Total power requirement: 14 kW Machine weight: 8 t Workpiece counter: 886,067 pieces

Condition: good (used), Year of construction: 1991, weight of the machine ca. ca. 6 t The design of the basic machine is characterised by the following features: - horizontal position of the workpiece spindle; vertical position of the milling spindle or milling head of the milling head - The workpiece is held between the workpiece headstock (left) and the tailstock (right). - the radial slide is mounted on the base (X-axis) - the axial slide moves on the radial slide (Z-axis) - the shift milling head is equipped with an automatic angle adjustment Ndsdpfxjub Amfs Aa Ejf (A-axis); the shift slide (Y-axis) moves diagonally to the workpiece diameter - CNC controlled - IBH control - loading device - Many accessories Technical data: - largest milling module with hobs according to DIN 8002: 4.5 mm - largest milling module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - max. workpiece diameter for manual loading: 200 mm - max. workpiece diameter for automatic loading: 150 mm - maximum workpiece length: 400 mm - largest / smallest milling cutter diameter: 102/40 mm - maximum cutter length: 230 mm - largest / smallest milling arbor diameter (standard): 32/16 mm - Axial slide path = largest milling length Z-axis: 300 mm - Radial slide path X-axis: 140 mm - Milling cutter shift path Y-axis: 100 mm - Milling stock path W-axis: 420 mm - Swivelling angle of shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 1ß0 - 150 mm - Y-axis (end face of milling spindle): 50 - 230 mm - W-axis (face of tailstock spindle): 165 - 585 mm - Milling cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed speeds: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, VEB Fritz Heckert ZFWVG 250×2000 Njdpfxow Dvans Aa Eedf Maximum workpiece length: 2,000 mm Maximum workpiece diameter: 250 mm Accessories: 2nd milling head, hob cutters in various modules, steadies, clamping devices, etc.

Condition: ready for operation (used), Year of construction: 1966, operating hours: 100,000 h, functionality: fully functional, workpiece weight (max.): 11,500 kg, feed length X-axis: 483 mm, feed length Y-axis: 381 mm, feed length Z-axis: 521 mm, rotary table diameter: 737 mm, table diameter: 737 mm, total length: 3,960 mm, gear diameter: 914 mm, total height: 2,300 mm, total width: 2,130 mm, input frequency: 50 Hz, workpiece diameter (max.): 914 mm, type of input current: three-phase, spindle speed (max.): 200 rpm, spindle speed (min.): 50 rpm, grinding spindle motor power: 7,500 W, overall weight: 8,000 kg, rotational speed (max.): 300 rpm, rotational speed (min.): 65 rpm, Machine Description — Churchill U/PH 3615 Gear Hobbing Machine The Churchill U/PH 3615 is a heavy-duty gear hobbing machine designed for the precise and efficient production of spur and helical gears. Built with a robust and rigid structure, this machine delivers excellent stability and high cutting performance, even under demanding industrial conditions. This machine features a vertical gear hob spindle with infinitely variable spindle speed, allowing operators to optimize cutting speed for various gear sizes and materials. The solid construction minimizes vibration and ensures consistent gear quality throughout extended production runs. The hobbing machine is capable of handling large workpieces up to 914 mm in diameter and supports a wide range of gear widths, making it suitable for both medium and heavy machining tasks. The machine’s substantial rotary table (762 mm diameter) and extended travel ranges offer flexibility for different gear configurations. Powered by a 10 HP (≈7.5 kW) main drive motor, this unit provides reliable power for stable cutting. The horizontal travel of the worktable is 483 mm, while the vertical travel of the tool slide is 381 mm, allowing precise movement control in X and Y axes. The hob slide offers 127 mm travel in the Z axis, enabling effective depth control during gear cutting. The hob spindle speed is continuously adjustable between 50 and 200 rpm, making it adaptable to different hobbing conditions. Vertical feed rates range from 0.38 to 5 mm per revolution, allowing smooth and controlled engagement of the hob with the workpiece. Constructed in 1966 and designed for durability, the Churchill U/PH 3615 remains a reliable and fully functional machine capable of handling large industrial gear production. Its sturdy frame, accurate drives, and flexible feed options make it a preferred choice for workshops seeking dependable gear manufacturing performance. Ndjdpfsx Itfijx Aa Eof Overall, the Churchill U/PH 3615 offers: -Heavy-duty, industrial-grade build quality -Large part capacity and flexible travel ranges -Adjustable spindle speeds and feed rates -Reliable operation for continuous gear production

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Machine still under power and production can be seen at any time. Technical Data – PE 150 This hobbing machine with automatic workpiece change system is designed for series production of workpieces, for which the corresponding drawings have been received. Our specialists for automatic workpiece changing systems will gladly assist you if you wish to convert the machine for milling different workpieces. Hob Cutter: Max. permitted cutter outside diameter: 130 mm Max. length (depending on cutter arbor diameter): 220 mm Slide Travel: Radial (X-axis): 150 mm Tangential (Y-axis): 170 mm Axial (Z-axis): 200 mm Max. Swivel Angle of Milling Head: In +A direction: 30° In -A direction: 45° Workpiece Table: Outer diameter: 160 mm Bore diameter: 63 mm Overall Dimensions of the Machine: Length: 5,820 mm Width: 4,047 mm Height: 2,810 mm Approximate Weight of Machine: 8,000 kg Speeds: Feeds: Axes X, Y, and Z: 1 to 3,000 mm/min Rapid Traverses: Axes X, Y, and Z: 3,000 mm/min Spindle Speeds: Njdpfou N E Rrex Aa Esdf Tool (S-spindle): 150 to 600 rpm Workpiece table (C-axis): 1 to 125 rpm Electrical Equipment: Operating voltage: 400 V Supply voltage: 230 V Control voltage: 24 V Frequency: 50 Hz Connected load of the machine: 48.5 kVA Cable cross-section: 25 mm² Fusing: 100 A

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1443, table diameter: 180 mm, gear diameter: 200 mm, milling spindle length: 230 mm, spindle speed (max.): 750 rpm, swivel angle A-axis (min.): -45 °, swivel angle A-axis (max.): 45 °, TECHNICAL DETAILS Max. workpiece diameter: 200 mm Table diameter: 180 mm Max. table speed: 100 rpm Center distance: 15 - 400 mm Machine column Max. axial travel: 600 mm Milling head swivel device Milling head swivel angle: ± 45 degrees Milling head Drive power: 27 kW Max. module: 7 mm Max. cutter speed: 750 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Max. tangential travel: 200 mm Max. tangential speed: 3,000 mm/min Counter column Max. counter support travel: 540 mm Ndedpfxow T Ry Tj Aa Esf Max. counter support rapid traverse: 15,000 mm/min Max. counter support arm force: 13 kN MACHINE DETAILS Approximate total weight: 15,000 kg Ambient temperature: 15 - 38 °C Operating voltage (tolerance +/- 10%): 400 V Operating frequency (tolerance +/- 2%): 50 Hz Control voltage: 24 V DC Hydraulics Hydraulic oil: HLP 46 Max. operating pressure: 70 bar Pump flow rate: 24 l/min Hydraulic volume in hydraulic reservoir approx.: 7 l Max. average noise level: 82 dB(A)

Condition: used, Year of construction: 1992, max. wheel diameter 160 mm gear width 710 mm max. module 4,5 min. module 0,5 milling spindle speeds (infinitely variable) 70 - 400 U/min Ndsdpfx Aevz Edroa Eof centre distance 800 mm total power requirement 11 kW weight of the machine ca. 4,7 t dimensions of the machine ca. 3,6 x 3,0 x 2,0 m 2-cut-cycle, shifting, very nice condition. Change gears, arbors.

Condition: used, Horizontal Gear Hobbing Machine WMW MODUL ZFWZ 1250/3 Year of manufacture: 1982 Control: conventional Nedpfx Aaswxxxco Ejdf Country of origin: Germany Max. gear diameter: 1250 mm Gear width: 600 mm Module – max.: 16 Module – min.: 2 Cutter diameter: 240 x 280 mm Table clamping surface: 1020 mm Speed range: 28 – 200 rpm Axial feeds: 0.28 – 8 mm/min Radial feeds: 0.1 – 2 mm/min Tangential feeds: 0.16 – 4 mm/min Swivel range of milling slide - L/R: +/- 45° Rapid traverse motor: 12.5 kW Voltage: 380 V Frequency: 50 Hz Total power requirement: 5/19.5 kW

Condition: like new (used), Year of construction: 2004, More Photos coming soon hob cutter: -Largest permissible tip circle diameter: 80 mm Largest toothed length: 70 mm Largest total length: 240 mm Taper for trimming with counter bearing steep taper 1:3, 4286 Mounting diameter of the collet: 32 mm Sliding paths: Radial (X-axis): 100 mm Tangential (Y-axis): 160 mm Axial (Z-axis): 300 mm Tailstock (Z4 axis): 350 mm Loading gantry (X5 axis) 3800 mm Largest milling head swivel angle: Direction +A: 40 degrees Direction A: 40 degrees Workpiece spindle: Outer diameter: 160 mm Bore: 63 mm Overall dimensions of the machine: Length: 9130 mm Width: 3895 mm Height: 3200 mm Gain of the machine: 8400 kg Feed rates: X and Z axes: 1 to 10000 mm/min Y axis: 1 to 5000 mm/min Rapid traverse: X, Z and Z4 axes: 10000 mm/min Y axis: 5000 mm/min X5 axis: 150 mm/min Speeds: Tool: 300 to 4000 min^-1 Workpiece spindle: 0 to 1000 min^-1 Operating voltage: 400 V Supply voltage: 230 V Control voltage: 24 V Frequency: 50 Hz Connected load of the machine: 48 kVA Cable cross-section: 35 mm2 Fuse protection: 70A wälzfräser: -Großter zulassiger Kopfkreissdurchmesser: 80 mm Groste verzanne Lange: 70 mm Größte Gesamtange: 240 mm Kegel zum Abstutzen m Gegenlager Steilkegel 1:3, 4286 Aufnahmedurchmesser der Spannzange: 32 mm Schlitterwege: Radial (X-Achse): 100 mm Tangential (Y-Achse): 160 mm Axial (Z-Achse): 300 mm Reitstock (Z4-Achse): 350 mm Ndedpfoqpf Ifex Aa Eef Ladeportal (X5-Achse) 3800 mm Größter Fräskopfschwenkwinkel: Richung +A: 40 Grad Richtung-A: 40 Grad Werkstückspindel: Außendurchmesser: 160 mm Bohrung: 63 mm Gesamtabmessungen der Maschine: Lange: 9130 mm Breite: 3895 mm Höhe: 3200 mm Gewinnt der Maschine: 8400 Kg Vorschübe: Achsen X und Z: 1 bis 10000 mm/min Achse Y: 1 bis 5000 mm/min Eilgänge: Achsen X, Z und Z4: 10000 mm/min Y.Achse: 5000 mm/min X5-Achse: 150 mm/min Drehzahlen: Werkzeug: 300 bis 4000 min^-1 Werkstückspindel: 0 bis 1000 min^-1 Betriebsspannung: 400 V Versorgungspannung: 230 V Steuerspannung: 24 V Frequenz: 50 Hz Anschlußwert der Maschine: 48 kVA Kabelquerschnitt: 35 mm2 Absicherung: 70A

Condition: used, Year of construction: 2000, functionality: fully functional, table diameter: 132 mm, wheel diameter: 130 mm, spindle speed (max.): 3,500 rpm, tool diameter: 80 mm, swivel angle A-axis (min.): -40 °, swivel angle A-axis (max.): 40 °, Gear Hobbing Machine - Vertical SAMPUTENSILI S130 CNC Module Well-maintained CNC vertical gear hobbing machine for shafts and gears with tailstock Also suitable for hard milling (good for steering pinions) TECHNICAL DETAILS Control type: CNC Control name: Sinumeric 840C Gear diameter: max. 130 mm Module: max. 3 Total power requirement: 15 kW Machine weight: approx. 6 t Space required: approx. 2.3 m x 2.5 m x 2.17 m Rapid traverse radial, axial: 10,000 mm/min Rapid traverse tangential: 7,500 mm/min Max. gear diameter: 130 mm Max. module: 3 mm Tangential slide travel: 200 mm Radial Sliding travel: 10/100 mm Axial slide travel: 300/200 mm Milling head speed: 250-3500 rpm Milling head: Tiltable up to ± 40° Tool diameter: 80 mm Tool length: max. 240 mm Table speeds: 5-1000 rpm Milling spindle drive: 15 kW Ndsdpfxowmb Nyo Aa Ejf Feed range: 0.1-2000 mm/min Table diameter: 132 mm MACHINE DETAILS Control: Sinumerik 840 C Connected load: 40 kVA Motor power: 15 kW Weight: 6 t Dimensions: 2300 x 2500 x 2170 mm EQUIPMENT - Hydraulic workpiece clamping - Automatic loading system - Magnetic Chip conveyor

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm max. module 6 Overall size 300x330x245 cm weight of the machine ca. 5,5 t Specification: Max wheel diameter: 400 mm Min module: 1 Max module: 6 Table diameter: 370 mm Max wheel diameter: -With counterstay: 340 mm -Without counterstay: 400 mm Max axial offset: 275 mm Max tangential adjustment: 100 mm Tooth helical angle: 45 degrees Max cutter diameter: 145 mm Max hobbing length: 170 mm Hob turning speeds capacity: 63-180 U/min Feeds infinitely variable axial: 0,2-10 mm/U Feeds infinitely variable tangential: 0,1-5 mm/U Radial for spur gears: 0,1-4 mm/U Radial for worm gears: 0,025-1 mm/U Rapid traverse axial: 500 mm/min Rapid traverse tangential: 250 mm/min Radial for spur gears: 400 mm/U Radial for worm gears: 100 mm/U Nodpfx Aaju A I Els Ejdf Motor power: 7.4 kW

Condition: used, Year of construction: 2002, functionality: fully functional, wheel diameter: 130 mm, workpiece height (max.): 170 mm, TECHNICAL DETAILS Control: Sinumerik 840D Tip diameter: 80 mm Toothed length: 170 mm Overall length of hob cutter: 245 mm Collet diameter: 32 mm Tool speed: 300 - 3000 rpm Nedpfx Ajv I Tmuoa Ejdf Gear diameter: max. 130 mm Gear width: 170 mm Module: 0.5 - 3 Slide travel radial / tangential / axial: 200 / 170 / 250 mm Milling head swivel angle: ± 45° Workpiece table: Ø 168.14 mm Bore: 65.532 mm Table speed: 0 - 1000 rpm Table bore: 65.532 mm Feed X/Z: 1 - 6000 mm/min Rapid traverse X, Z / Y: 6 / 5 m/min MACHINE DETAILS Total power requirement: 48 kVA Operating voltage: 3 x 400 V, 50 Hz Machine weight: approx. 9 t Space requirement: approx. 7.64 x 3.14 x 3.25 m

Condition: good (used), max. wheel diameter 630 mm gear width 375 mm max. module 10 clamping table 550 mm table hole 125 mm milling spindle speeds infinitely variable 62 - 390 U/min taper MORSE 5 axial-feeds 0,40 - 6,80 mm/U radial feeds 0,10 - 1,76 mm/U dist. cutter spindle - workpiece spindle 50 - 425 mm Nsdpjua It Ujfx Aa Ejdf no. of teeth min. 8 milling cutter dia. x width 192 / 215 mm shifting 200 mm main drive motor 7,5 kW total power requirement 21 kVa weight of the machine ca. 8,2 t Equipment of the machine: - Universal milling head with tangential displacement - Pressure reducing valve for counterholder - Magnetic chip transport - Year of construction approx. 1976

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0315, workpiece weight (max.): 15 kg, wheel diameter: 80 mm, milling length: 220 mm, workpiece length (max.): 450 mm, TECHNICAL DETAILS Max. workpiece diameter: 80 mm Workpiece weight: 15 kg Workpiece length: -50 mm - 450 mm Machining Max. nominal module for steel: 3 mm Max. milling stroke: 250 mm Max. shift travel: 180 mm Table diameter: 145 mm Table speed: 150 rpm Milling head swivel angle: ±45 degrees Cutter-workpiece center distance: 10 mm - 200 mm Milling unit Cutter diameter: 90 mm Cutter length: max. 220 mm Cutter speeds: 1,000 rpm Milling spindle drive power: 15 / 23 kW Table drive power: 5.8 / 19.0 kW Ndedowmbnpjpfx Aa Esf MACHINE DETAILS Weight of the machine with counterweight: 10,000 kg Total connected load: 25–35 kVA

Condition: used, Year of construction: 1969, max. wheel diameter 160 mm gear width 355 mm max. module 4,5 min. module 0,5 centre distance 450 mm total power requirement 11 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2x17,1,6 m Wheel diameter - max. 160.175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Center distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Center distance between milling cutter and workpiece - max. 138 mm Center distance between milling cutter and workpiece - min. 30 mm Milling head - swivels 120 ° Milling cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Ndedpfx Ajvz Ec Ija Eof Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Changing wheels - milling arbors - Clamping device Dra8M7 - documentation

Condition: used, Year of construction: 2008, max. wheel diameter 900 mm gear width 450 mm max. module 10 min. module 1 min. number of teeth 8 milling cutter dia. x width 192 x 215 mm distance table / middle of spindle 910 / 630 mm distance bet. workpiece spdl. ctr-milling sp. 50 / 550 shifting 200 mm swivelling of milling head 240 Grad table diameter 700 mm table bore diameter 160 mm milling head speed 25 - 160 U/min total power requirement 21 kW change gears, arbors, shifting, 2-cut circle, chip conveyor, outer steady Njdpfx Aaowzmp Ue Ejdf # with crowning device # in excellent working condition

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D weight 57.000 kg voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm --> Largest clampable cutter (internal milling head): --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm Ndjdpfswzyp Ijx Aa Esf --> Min. internal diameter at 0° bevel angle: 800 mm+) --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm

Condition: used, Year of construction: 2007, control Siemens 840D Nsdewzypuepfx Aa Eodf

Condition: used, Year of construction: 2008, control Siemens 840D Ndjdpfx Aaswzypne Eof