Used Turret Milling Machine for sale (92,017)

Condition: good (used), Year of construction: 1998, dia. of draw-in collets 17,5 mm internal taper of cone draw-in collets MK 1 , Mk 2, Ga speeds of grinding spindle 2800 U/min total power requirement 0,25 kW weight of the machine ca. 67 kg dimensions of the machine ca. 510 x 565 x 290 mm Milling cutter grinder with a base cabinet for grinding milling cutters or styli in a central and offset position. The dividing head holder allows for circular movements in all directions, as well as longitudinal and transverse movements of the tool axis. The tool holder has a 40 mm longitudinal adjustment, a 10 mm lateral adjustment, and a 15 mm fine adjustment of the dividing head holder relative to the grinding spindle. Machine dealer with own stock of 1600 m². Bsdpfx Aexr Raisdxjlp

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 16,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, Head Pick up Station TUPC CNC Indexing Micro Head A-Axis 360.000 x 0,001 Gr C-Axis 360.000 x 0,001 Gr SELS Spindle extionsion L=500 mm CTS Internal coolant system ATC Chain Tool changer 60 Positions Hydrostatic guideways Optional T Slotted floorplates 5600 x 1875 (2x) + 4000 x 1875 mm X-Axis: 16.000mm Y-Axis: 3.500mm Z-Axis: 1.500mm Power on spindle: 80kW Spindle speeds: 4000Rpm Spindle Taper: Sk59ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Bledpjxpfkkefx Adxjp Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 24000mm Width: 6500mm Height: 6500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 800 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 5,000 rpm, spindle speed (min.): 55 rpm, quill stroke: 75 mm, quill travel distance: 75 mm, quill diameter: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 2 m/min, table width: 500 mm, table length: 900 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 55 rpm, table load: 400 kg, overall weight: 2,700 kg, workpiece weight (max.): 400 kg, warranty duration: 12 months, Equipment: documentation/manual, rotational speed infinitely variable, ABENE VHF 380 CNC – Universal Milling and Drilling Machine (NEW) Condition: New Location: Pfullingen (Germany) Inspection: Under power, ready for demonstration Technical Specifications Bjdpfx Adjwf E R Esxjlp Travel paths: X = 800 mm | Y = 500 mm | Z = 475 mm Control: Heidenhain TNC 620 with ABENE/Heidenhain software Spindle speed: 55 – 5,000 rpm (2-speed gearbox, frequency-controlled) Spindle taper: SK 40 (DIN 2080 / 69871 / 7388) Spindle motor: 7.5 kW AC motor Feed rates: X/Y up to 5,000 mm/min, Z up to 2,000 mm/min Swiveling head: 0 – 140° Table size: 900 × 500 mm T-slots: 7 × 14 mm (1 × H7) Max. table load: 400 kg Machine dimensions (W × D × H): approx. 2,300 × 2,450 × 2,200 mm Weight: approx. 2,700 kg Features • Heidenhain TNC 620 with ABENE software for ease of operation • Electronic handwheel HR-510 for X, Y and Z axes • AC servo drives with stepless control • Automatic central lubrication of all guideways and ball screws • Hardened and ground guideways • Collision protection monitoring on all axes • Extendable chip tray • LED machine light 24 V / 70 W • Complete electrical installation 400 V / 3 Ph / 50 Hz • Table enclosure with sliding door • Includes operating manual, spare parts catalogue and inspection certificate Description The ABENE VHF 380 CNC is a universal milling and drilling machine "Made in Sweden" with the proven ABENE slant bed concept. It combines precision, stability, and simple operation – ideal for training, toolmaking, and single-piece or small batch production. Thanks to the intuitive Heidenhain TNC 620 control, the machine is especially user-friendly and perfectly suited for deepening practical CNC skills. The machine is available for viewing and testing under power at our warehouse in Pfullingen. We are happy to arrange a demonstration appointment!

Condition: good (used), – MK3 – 100/3200 rpm Bsdpfx Ajxtq R Redxjlp – Digital display – Height-adjustable drill head – Tilting drill head – Table 580 × 240 mm – Gear drive – Safety guard – Emergency stop switch – Lighting – Machine vice – 380 V

Condition: good (used), Year of construction: 2017, m. control PC +++ Attention: Machine is part of an online auction! +++ Bledpfxsxt Nl Tj Adxsp

Condition: used, power: 559 kW (760.03 HP), fuel type: diesel, color: yellow, operating hours: 3,914 h, Drive: Crawler Number of cylinders: 10 Engine displacement: 15,600 cc Unladen weight: 37,900 kg Dimensions (L x W x H): 895 x 250 x 385 cm Bjdsxrn D Espfx Adxjlp Working width: 220 cm CE marking: yes

Condition: good (used), Complete specifications can be found in the photos of the listing. CNC HEIDENHAIN 426. The machine is in excellent mechanical condition. Bsdpfx Adsxl Htfsxslp

Condition: used, x-axis / mm y-axis / mm z-axis / mm The boring mill is sold without clamping plates – the price refers exclusively to the boring mill. Technical data Horizontal milling and drilling machine with support sleeve Working range Vertical adjustment of the headstock from the clamping surface: 0 - 3000 mm Horizontal adjustment of the column: 7000 mm Maximum drilling depth with drill spindle alone: 1200 mm Maximum drilling depth with drill spindle and support sleeve together: 1300 mm Drill spindle diameter: 150 mm Milling spindle diameter: 240 mm Support sleeve diameter: 390 mm Support sleeve extension: 700 mm Drill spindle tool holder: ISO 50 Maximum workpiece weight: 70,000 kg When placed in 4 prisms: 95,000 kg Main drive Total speed range, adjustable from 2 - 795 rpm Series 1 2 - 50.4 rpm Series 2 50.4 - 126 rpm Series 3 126 - 314 rpm Series 4 314 - 795 rpm Maximum drive power at rated speed 17.5 80 kW Quick adjustment speed of spindle box and column 1800 mm/min Rapid adjustment speed of drill spindle and support sleeve 1400 mm/min Fine adjustment speed of spindle box and column medium 75 mm/min Fine 3 mm/min Fine adjustment speed of drill spindle and support sleeve Medium 57.7 mm/min Fine 2.5 mm/min Feed of headstock and column for milling Row 1 3 - 75 mm/min Row 2 72 - 1800 mm/min Feed of drill spindle for drilling Row 1 0.19 - 4.7 mm/min Row 2 2.2 - 56 mm/min Row 3 56 - 1400 mm/min Special equipment Numerical length measuring device in horizontal and vertical directions Accuracy 0.01 mm Rotatable and movable clamping table, Collet & Engelhard, Offenbach Model Tdvmf 1.6 (for technical data, see ‘Clamping table’) Rotatable and movable clamping table from Scharmann, Rheydt Model DAV 1600 Rotatable and movable clamping table from Froriep, Rheydt Swivel crane for tool change, maximum load capacity 500 kg Special tools Bsdpsxdnrajfx Adxjlp Carbide core drill bits for extracting core samples Universal facing and boring head from Wohlhaupter, Frickenhausen Model UPA7, with the following specifications: 1 division of the fine adjustment 0.01 mm in diameter 1 revolution of the fine adjustment 0.5 mm in diameter Facing and boring range 0 - 1250 mm Maximum slide adjustment 210 mm Automatic slide feed in mm/rev during facing 0.05 - 0.10 - 0.15 - 0.20 - 0.25 - 0.30 - 0.35 - 0.40 - 0.45 - 0.50 - 0.55 - Quick adjustment per revolution of the quick adjustment spindle 6 mm in diameter Largest diameter of the slide at zero position corresponds to the smallest drilling diameter of 323 mm Head height without shaft 260 mm

Condition: new, 3-axis digital display Fagor 40i Innova, Spindle speed: 65 - 2600 rpm Taper: ISO 40 Working area: 420 x 220 x 380 mm Table: 840 x 390 mm Motor: 2.2 kW Clamping surface of work table: 840 x 390 mm Bledpfx Aoxtu D Isdxop Rapid traverse in all 3 axes: 1000 mm/min T-slots: 5 Width x spacing: 14 x 63 mm Max. table load: 200 kg Longitudinal travel: approx. 420 mm Cross travel: approx. 220 mm Vertical travel: 380 mm Infinitely variable feed (X, Y axes): 0 - 600 mm/min Infinitely variable feed (Z axis): 0 - 600 mm/min Horizontal spindle speed range: 65 - 2600 Spindle centreline distance from column guideways: 90 - 310 mm Vertical spindle speed range: 65 - 2600 Spindle swivelling: +/- 90° Quill travel: approx. 100 mm Tool clamping: manual Spindle motor: 2 kW Vertical table: 950 x 250 mm Distance vertical milling spindle to milling table: 90 - 310 mm Distance horizontal milling spindle to milling table: 100 - 480 mm

Condition: good (used), – ISO40 – 35/1800 rpm – Infinitely variable spindle speed – Table 1100 x 250 mm – Automatic feed on X, Y, and Z axes – Infinitely variable feed rate – Rapid traverse – Heidenhain digital readout on X, Y, and Z axes Bjdpfjxtgfksx Adxjlp – 3D milling head – Coolant system – Protective cover – Emergency stop button – Tooling package – 380 V

Condition: good (used), Year of construction: 1984, 12 spindle speeds, spindle mount SK40, speed range 50–2240 rpm, hydraulic machine vice, jaw width 125 mm, tool trolley, manuf. Theisen Werkzeuge, steel, green, mobile, 3 drawers, various accessories +++ Attention: Machine is part of an online auction! +++ Bodpfxext Nlas Adxelp

Condition: good (used), Year of construction: 2002, Robust Tilting Spindle Moulder T 26, tiltable from -45 to +45 degrees with 2-axis position control Duocontrol Tilting spindle moulder in excellent specification A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Height adjustment max. 150mm, electric adjustment When adjusting the height, the correction factor for the tilting angle is shown in the upper display, which can then be set on the stop, allowing settings according to drawings Four spindle speeds: 3,000, 4,500, 6,000, and 9,000 rpm Spindle diameter 30mm, quick-change spindle with torque wrench Electrically adjustable fence, infeed jaw adjustable with handwheel and SIKO counter Manual operation of the axes or automatic positioning of height and fence Fence with lifting device can be swung away (for curved milling work) Table opening adjustable via eccentric table rings, electric adjustment Table extension on right and left with pull-out workpiece support Support can be extended by up to 700mm Table length approx. 2400mm Hinged fence for plunge routing Original Martin aluminium fence jaws with two bridges Aigner Centrex workpiece pressure device 3-roller power feed HolzHer 1117, with 8 speeds, reversible, new rollers Power feed socket, switchable from the control panel Extraction port 2 x 120mm Compressed air connection 6bar Emergency stop switch Some parts of the machine have been newly painted Approx. 7,400 operating hours Operating instructions CE marking Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier." Bledpfxsvv H T Re Adxjp

Condition: used, functionality: fully functional, HURE Milling Machine Brand: HURE Bledpexltzpsfx Adxep Longitudinal travel - X axis: 1000 mm Cross travel - Y axis: 600 mm Vertical travel - Z axis: 500 mm Table size: 1600x400 mm Spindle speed: 10 to 2000 rpm Approximate weight: 3300 kg

Condition: good (used), Table size: approx. 600 x 150 mm X/Y/Z travel: approx. 300 / 130 / 300 mm Spindle taper: W20 Weight: approx. 600 kg Smooth-running axes, minimal backlash. Tiltable table Automatic feed on X-axis Motor brake Spindle speeds 100 to 2000 rpm Note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend checking all relevant details. Bledpfx Asxq Taiodxop Financial information VAT/margin: Margin: The price shown includes VAT (VAT is not deductible for businesses).

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 4,000 rpm, table length: 8,000 mm, table width: 2,500 mm, table load: 15,000 kg, Chain ATC Tool changer 80 positions Rotary table 1500 x 1500 with V-Axis 1500 mm Table load 15.000 Kg Optional Box table 3500 x 1000 x 1000 mm Blodpfjxm Sudex Adxop Under power X-Axis: 8000mm Y-Axis: 3100mm Z-Axis: 1600mm Table Length: 8000mm Table Width: 2500mm Table load: 15000 Power on spindle: 43kW Spindle speeds: 4000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Control: iTNC530 Millinghead auto-index:2.5 x 2.5° Length: 14000mm Width: 6000mm Height: 6000mm Weight: 68000kg

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,000 mm, distance between stands: 2,000 mm, controller model: Siemens 840D SL, TECHNICAL DETAILS Axes: 5 controlled X travel: 4,000 mm Y travel: 3,400 mm Column clearance: 2,000 mm Z travel: 1,000 mm Control: Siemens 840D SL Spindle power: 37 kW Speed range: 12–2,800 rpm Distance spindle to clamping surface: 280–1,280 mm Taper: ISO SK-50 Blsdpfsxtb Sxox Adxop Table size (longitudinal): 3,000 mm Table size (cross): 1,500 mm C-axis swivel range: 0–360° (in 1° increments) Swivel range: 90°–0°–90° (in 1° increments) MACHINE DETAILS Total power requirement: 70 kVA Machine weight: approx. 82 t Footprint: approx. 10,200 mm x 7,200 mm x 5,925 mm EQUIPMENT Automatic tool changer for 60 tools 1 universal milling head, 1,750 Nm

Condition: excellent (used), Year of construction: 1994, Holz Her Tilting Spindle Moulder with Holz Her Power Feeder Table extension on both sides with pull-out stop Swiveling spindle: Yes, -5 to +45° Height adjustment: manual Tilting adjustment: electric Fence adjustment: manual Height display: digital Tilting angle display: digital Fence position display: scale Spindle diameter: 30 mm Speeds: 1500, 3000, 4500, 6000, 9000, 12000 rpm Bledpoxpm Evjfx Adxsp Motor power: 5 / 6 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 1950 mm Machine depth: 1400 mm Weight: approx. 1100 kg Holz Her Power Feeder, type 1112 – 4 rollers Location: Ex stock 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 2007, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table width: 5,500 mm, table length: 2,600 mm, total height: 4,900 mm, total width: 16,200 mm, total length: 9,000 mm, overall weight: 55,100 kg, CNC Floor Type Bed Milling Machine CNC Control Heidenhain iTNC 530 Controlled NC Table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Movement X-axis 8000 mm Movement Y-axis 2100 mm Movement Z-axis 1300 mm Movement W-axis 1000 mm Bsdpfxoxltbvo Adxjlp C-axis-swivel of milling head body 360 ° A-axis-swivel of milling head 180° Spindle speed 36 - 6.000 R/min Spindle motor 42 / 30 kW Spindle taper DIN 69871-SK 50 Tools in tool magazine 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 1994, condition: good (used), Macmon M400 CNC with Heidenhain TNC 355 control Manufacturer: Macmon Type: M400 CNC Control: Heidenhain TNC 355 Year of construction: 1994 Weight: 2700 kg Connected load: 12 kW Travel X: 630 mm Travel Y: 450 mm Travel Z: 380 mm clamping surface table: 800x500 mm spindle revolutions: 20-2780 rpm Steps: 2x continuous Spindle power: 5,5 kW tool holder: SK40/ISO40 Axle drive: 0-2000 mm/min Axis drive rapid traverse: 5000 mm/min quill stroke W: 100 mm Swivelling of the head: 2x90 Resolution measuring system: 0.001 mm positioning: +/- 0,02 mm Special features: protective housing to open, chip tray, quill stroke Blsdefmu E Aspfx Adxop

Year of construction: 1980, condition: used, Manufacturer MAHO Type MAHO 900 Year of manufacture 1980 Operating hours 45000 Accessories: Various tool holders SK50 Bjdpfob D Iv Tjx Adxelp Space requirement machine (LxWxH) 4800 x 3600 x 2400 Loading dimensions machine (LxWxH) approx. 4m x 2,1m x 2,5m Weight machine 5600 kg

Year of construction: 1973, condition: used, Travel 800 x 500 x 450 mm Blodpob S Ivuefx Adxop Table load approx. 600 kg Weight approx. 4 t.

Year of construction: 1989, condition: good (used), Machine: Control Heidenhain TNC 355 Built in 1989 Travel: Bljdped I Uwmefx Adxsp X 600 mm method path Y 450 mm process path Z 400 mm method Spindle speed 20 – 4000 min-1 Angular size 850 x 440 mm Swivel cull 650 x 395 mm Electronic hand wheel The machine is still under power and is in good condition.

Condition: good (used), Year of construction: 1983, Maho 700 C, year of manufacture 1983 Travel paths X/Y/Z: 700 mm/500 mm/450 mm Table dimensions X/Y: 900 mm/500 mm Spindle mount: ISO 40 Spindle speed: 3150 rpm Spindle stroke: 100 mm Weight: approx. 3500 kg Controller: Philips CNC 432 Bodjwya U Uopfx Adxslp

Condition: good (used), Year of construction: 1984, Milling machine - horizontal drilling machine Brand: Bohle Type: BWS 120 Year of manufacture: 1984 Voltage: 380 V Power: 22 kW Longitudinal displacement in X: 1800 mm Transverse movement in Y: 600 mm Bsdpfevvldnox Adxslp Vertical movement in Z: 600 mm Overall dimensions: 3.80 mx 5.4 mx 3.2 m Weight: 9500 kg

Year of construction: 2006, condition: excellent (used), Swing angle 135 Motor 1.1 kW Bedpfx Ajhr D Ayedxelp table height 860 mm table surface 800×1000 mm spindle dimension 28 x 90 mm spindle speed 1500 rpm with feed unit: Fields S/308, year 2011 and accessories