Used Tube Threading Machine for sale (65,785)

Condition: used, Year of construction: 1979, Roundo plate/pipe roller. In recent years, it has primarily been used for rolling smoke pipes with a diameter of 150–160 mm. Four pallets with rollers are included; they are used to determine the pipe diameter. Using a pneumatic cylinder, the end is opened to remove the rolled pipe. I have tested the machine, but the rollers do not run. There is probably a simple solution for this. Machine and rollers weigh approximately 3–4 tons. Dcedpeyvqc Usfx Ag Dof

Condition: used, Year of construction: 2015, thread dia. 20 - 80 mm grinding length 3500 mm thread pitch . mm threading lenght min./max. 50/3500 mm centre height 400 mm workpiece length - max. 4000 mm control Siemens 840-Dsl Dodpfxew Ed S Uo Ag Docf feed speed u-axis 0 - 2500 mm/min feed speed w-axis 0 - 2500 mm/min feed speed b-axis 100 1/min total power requirement 45 kW weight of the machine ca. 24 t dimensions of the machine ca. 10,7 x 4,6 x 2,9 m Thread Grinding Machine / Profile Grinding Machine, suitable for: - the thread grinding of single and multi-start ball screws with gothic profiles and special profiles - Ø 20 to 80 mm with a grinding wheel Ø of 350 to 500 mm - length between the centers up to max. 4000 mm Equipment / Accessories: - grinding spindle: - capacity 14 kW - with a grinding wheel diameter range of 350-500 mm, cutting speeds between 20 and 75 m/s can be set. - grinding wheels: - diameter new 500 mm - diameter worn 350 mm - bore diameter 203.2 mm - shaped diamond roll: - diameter 121.3 mm - radius 0.5 mm - driver flange for workpiece diameter 15-70 mm - driver: - for 10-32 mm drive diameter on the workpiece - for 31-60 mm drive diameter on the workpiece - for 60-105 mm drive diameter on the workpiece

Condition: good (used), Year of construction: 2005, control type: CNC control, - Max. bending angle: +/- 180 + 10° - Tube feed length: 4100 mm - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm - Square tubes: 20 x 2.5 mm Dcsdpfx Agjyx Ur So Dof - Bending time for 90 degrees: 1.5 sec (advance) - Longitudinal feed speed: 450 mm/sec - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Condition: good (used), Year of construction: 2008, control type: CNC control, Stainless steel tube diameter: up to 42 x 2.0 mm Steel tube diameter: up to 42 x 3.0 mm Max. bending angle: +/- 180 + 10° Section modulus: 4.1 ccm Operating pressure: 6 bar Total power requirement: 5.5 kW Dodpfeyx Un Hex Ag Djcf Machine weight approx.: 3 t Space requirement approx.: 6100 x 2300 x 1300 mm

Condition: used, Year of construction: 2007, pipe diameter (max.): 35 mm, overall weight: 2,700 kg, total length: 2,400 mm, total width: 1,400 mm, total height: 2,000 mm, Tube forming machine Brand: BLM Model: TUBE-FORM Dsdpfx Agex Tt H Re Decf Year: 2007 Serial number: 415050200004 Weight: 2700kg Power: 12KVA Three-phase 380V Dimensions: 2400x1400x2000(h)mm Maximum tube diameter: 35mm Pushing force: 3.5t Clamping force: 5t Max. working stroke: 130mm

Condition: new, thread dia. M6 - M36 turning speeds 30 - 150 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - Includes quick-change chuck - for use with taps - for through holes and blind holes - Swivel motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting - Thread is guaranteed to be right-angled (90°) - High productivity - significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes swivel arm with large radius - for easy positioning of the tap on the workpiece - Highly economical due to low investment and maintenance costs - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals Scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-change holder according to DIN - Quick-change chuck - Electric motor - 90° angle adjustment Dcjdpfoxab Eljx Ag Dof - Mounting flange Special accessories included: - BERNARDO base frame with 2 drawers * milled support surface 900 x 600 mm * including 3 T-slots (16 mm) * large storage space and 2 drawers for storing tools * 4x swivel castors including parking brake - Mounts according to DIN 376: * M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36

Condition: new, thread dia. bis M 36 turning speeds 0-100 U/min thread M5 - M36 working area 2050 Rmax. working range 500 Rmin. work height max. 900 mm Dcedpfxexab Ige Ag Dsf table surface area 700 x 900 mm oil volume 100 l engine output 5,5 kW weight - pallet system ca. 500 kg Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disk * Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base * Oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 M27 / M30 / M33 / M36

Condition: new, thread dia. bis M 24 turning speeds U/min thread M5 - M24 working area 2050 Rmax. working range 500 Rmin. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3,0 kW weight - pallet system ca. 300 kg Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disk * Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base * Oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge - continuous speed adjustment Dedjxab Iaspfx Ag Djcf - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22

Condition: new, thread dia. M5 - M24 turning speeds 70 - 200 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - with micro spray system for constant cooling & minimal Cooling lubricant consumption - Includes blow-out device to remove chips, ensuring optimal visibility on the borehole - Includes quick-change chuck for using taps for Through and blind holes - Swivel motor unit for thread cutting at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting, thread is guaranteed right angle (90°) - high productivity, significant time savings compared to manual Threading - Quick-change chuck with integrated slip clutch prevents breaking of the tap - Includes large radius swivel arm for easy positioning tap on the workpiece - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals scope of delivery Dsdpfxsxaaybe Ag Djcf - Operation via touchscreen - Digital drilling depth display - Micro spray system - Blow-out device - Quick change mount - Quick-change chuck according to DIN - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame 900 x 600 mm (Art. No.: Mounts: DIN 376: M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24

Condition: new, thread dia. 12 M max. turning speeds 400 U/min thread M 3 - M 12 M working area 1600 R max. working range 500 Rmin. weight 16.0 kg Description: Dodpfsxabbmjx Ag Djcf The AT II models have a radius of up to 1600 mm and thanks to their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - Tool holder with 6 cutter holders • M3 20111812 DIN 371 19 • M4 20111814 DIN 371 19 • M6 20111816 DIN 371 19 • M8 20111817 DIN 371 19 • M10 20111818 DIN 376 19 • M12 20111820 DIN 376 19 - with slip clutch - Control valve with lubrication - Including compressed air motor / maintenance unit - Adapter connection size 1

Condition: new, thread dia. 20 M turning speeds 400 U/min thread M 4 - M 20 M working area 1900 Rmax. working range 200 Rmin. Description: The AT models have a radius of up to 1900 mm and their construction a flexible workspace. For professional use. Easy to mount on a worktop. Dcedpexaaa Iofx Ag Djf Furnishing: - including 7 thread cutting inserts • M3 20111812 DIN 371 19 • M6 20111823 DIN 371 31 • M8 20111824 DIN 371 31 • M10 20111826 DIN 371 31 • M12 20111827 DIN 376 31 • M16 20111829 DIN 376 31 • M20 20111831 DIN 376 31 - Control valve with lubrication - Including air motor - Adapter connection size 2 - The cutting head can be pivoted vertically downwards by 90 ° - The cutting head is pivoted and rotatable through 360 ° - Operating instructions in German * without the perforated table as per Fig.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 063/09, thread length: 50 mm, workpiece diameter (max.): 6 mm, SMART MACHINERY NG S-DD Thread Rolling Machine Fully operational, currently in production. Year: 2009 Incoterm: EXW Calolziocorte (LC) The machine automatically sets up for stroke change. The NG S-DD thread rolling machine is equipped for changing the ram stroke depending on the length of the comb used. Minimum pass-through diameter: 1 mm. Maximum pass-through diameter: 6 mm. Dcodpfx Agjyycr Ne Def Maximum threaded length: 50 mm. Maximum rivet length: 80 mm. Maximum output: 700 pcs/min. Main motor power: 13.9 kW Installed electric power: 16 kW

Condition: good (used), Year of construction: 1998, functionality: fully functional, FOR SALE Thread rolling machines Escofier H20Z Dcodpoxv Dcxefx Ag Djf

Condition: new, Year of construction: 2023, pipe drilling machine, inclined drilling machine, automatic drilling machine TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + TO BE INSPECTED UNDER POWER - minimum quantity lubrication - manual material clamping - manual feed - max. tube length 3.000mm (option 6.000mm) - positioning accuracy +/- 0,2mm - 10 stops (can be extended as required) - manual insertion and removal of material - drill head swivels +/- 50 - manual 360 degree tube swiveling device - power drilling unit 1 x 2,2 kW - motor speed 295 - 2950 rpm - display speed on touch panel - illumination drilling unit - integrated tool cabinet - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm Dcedpfxjlgvkie Ag Dof - Flow drilling up to M12 - Drilling up to Ø 50mm

Condition: ready for operation (used), Year of construction: 1985, A thread and worm grinding machine Reishauer AG is available. Grinding length: 450mm, clamping length: 700mm, max. grinding diameter: 200mm, max. pitch: 80mm, max. workpiece weight: 100g, max. lead angle: +/-25°, grinding wheel diameter: 275mm/350mm, speed: 1850rpm. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1600mm, weight: approx. 3400kg. Including oil centrifuge, hood, oil mist extraction and various accessories. The splash curtain is slightly hardened. Documentation available. An on site inspection is possible. Dcedpfxox Dm Dne Ag Dsf

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: manual, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 5 mm, bending angle (max.): 180 °, input voltage: 400 V, input frequency: 50 Hz, Equipment: emergency stop, It is a machine from 2018 and we used very little. We can bend pipe from 18 mm - 60 mm Dodpfoyvhl Hex Ag Decf Machine cost new 2018 was ca 45.000,00 EUR and tools was ca 55.000,00 so total was EUR 100.000,00

Condition: used, TECHNICAL DETAILS - Part diameter : 100 [mm] - Nominal module Dcjdpfx Aox Ed A Rsg Def * gear hobbing : approx. 3.0 [mm] * endless screw milling : approx. 5.0 [mm] - Max. axial movement : 320 [mm] - Cutting head orientation : -45 / + 115 [°] - Main mill max. diameter : 118 [mm] - Max. cut out length of the mail mill : 180 [mm] - Max. mill movement (Shifting) : 160 [mm] - Max. part-holder spindle speed : 3000 [t/mm] - Min./max. distance between axes : 10/100 [mm] - Cutting head motor power : 14 [kW] - Main mill speed : 50-12000 [t/mm] - Weight : 5000 [kg] EQUIPMENT - CNC Siemens 840D - Cooling tank - Chip conveyor

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller model: SIEMENS SINUMERIK 810, workpiece length (max.): 830 mm, milling spindle speed (min.): 100 rpm, milling spindle speed (max.): 4,500 rpm, mount diameter: 78 mm, TECHNICAL DETAILS Milling spindle speed range: 100 - 4,500 rpm Maximum workpiece length: 830 mm Maximum workpiece diameter with double tooling: 135 mm Spindle mount: 2 x SK 40 Spindle nose: DIN 55026 Size 5 Mounting diameter: 78 mm Center distance: 135 mm Front bearing diameter: 110 mm Workpiece Slide (X-Axis) Workpiece slide travel: 810 mm Max. feed rate: 6 m/min Clamping surface: 200 x 1,750 mm Tool Post (Z-Axis) Tool slide travel: 120 mm Max. feed rate: 2 m/min Tool post adjustment: 200 mm Tailstock Tailstock quill travel: 100 mm Morse taper: 3 MT Centre height: 260 mm Quill center distance: 135 mm Steady rest through-hole: 40 - 80 mm MACHINE DETAILS Drive power: 5100 W Control system: SIEMENS SINUMERIK 810 Dimensions & Weight Dimensions (L x W x H): approx. 3.20 x 2.66 x 1.76 m Machine weight: approx. 6.5 t EQUIPMENT Various tool holders Dcodpfx Ageyl U Tuo Djf Steady rests Centre points, medium Coolant system

Condition: good (used), Thread cutting machine, pipe thread cutter Dodpfx Agjb A Iyaj Djcf -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: used, Threading machine, pipe threader, Ridgid 300, used machine Manufacturer: Ridgid Dcjdoybbamepfx Ag Def Type: 300 Overall dimensions: Width: 1180 mm Depth: 1250 mm Height: 1500 mm Electrical data: 230V Functions: Thread cutting, cutting to length, deburring

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Djdod E A I Ispfx Ag Djcf Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: used, Brush deburring machine, tube deburring machine ERINI type 250 Year of construction approx. 1995 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2,2 / 2,8 kW Dsdepu R Ngjpfx Ag Decf Mains connection 380 Volt, 50 Hz - Material support - New deburring brush - Suction connection Ø 100 mm Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Dodpfx Agjh A S Hts Dscf Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, pipe diameter (max.): 127 mm, bending angle (max.): 182 °, bending radius (max.): 400 mm, mandrel length: 4,000 mm, overall weight: 16,000 kg, total length: 7,000 mm, total width: 2,200 mm, total height: 1,800 mm, input voltage: 400 V, type of input current: three-phase, feed length Z-axis: 4,000 mm, wall thickness: 5 mm, Equipment: documentation/manual, Capacity, Ø mm / 127 x 5 Radius, min./max. / 50/400 Dsdpfsu Rf E Eex Ag Docf Bending speed/repeatability / 40º/s. ±0,1° Mandrel length 4 000 Weight, kg 16 000 Motor kW / 40 Length feed 900 mm/sec Degree of tolerance 0.05-0.1°/mm Tools: 63 mm

Condition: repair required (used), functionality: not functional, Year of construction: 2004, CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: Needs repair CNC: PC control Beckhoff Technical Specifications: - Maximum tube diameter x wall thickness: 80 mm x 3 mm - Minimum tube outside diameter: 16 mm - Minimum bending radius (to tube centre): 25 mm - Maximum bending radius (to tube centre): 240 + 50 mm - Maximum bending angle: 180° - Maximum tube lift length: 1000 mm - Bending direction: right - Machine weight: 7000 kg - Total installed power: 39 kW - Voltage: 400 V / 50 Hz - Amperage: 100 A - Machine dimensions (L x W x H): 6.2 x 3.2 x 2 m Equipment / Accessories: - Hydraulic pressure and feed for slide rails - Automatic tube feed and rotation device - Electric mandrel bending device - Pneumatic mandrel rod safety device Djdjxzubvjpfx Ag Dscf - PC control Beckhoff - Automatic central block lubrication - Laser scanner, safety guard Machine requires repair: The planetary gearbox of the transport trolley is defective and must be replaced. Spare parts costs according to offer: planetary gearbox €1,674 + gearbox flange €1,850 + pinion €850 + VAT Without installation. Cheap sale in current condition – sale as is. Immediately available, free loading onto truck included.