Used Training Workshop for sale (7,007)

Condition: used, functionality: fully functional, The ALZMETALL AX 2/S is the more compact sister machine to the ALZSTAR series. It is a professional, extremely precise bench or pillar drill (depending on the base), primarily used in precision engineering, training workshops, laboratories, and demanding workshops. While the ALZSTAR 30/S is designed for "rough" work with a drilling diameter of up to 30 mm, the AX 2/S focuses on compactness and maneuverability for smaller drilling diameters, without compromising the typical Alzmetall stability. Technical data at a glance Feature | Value / Specification ----- | ----- Drilling capacity (in steel St 60) | 23 mm Thread cutting (optional) | max. M 14 (steel) / M 16 (cast iron) Spindle mount | MK 2 (short spindle) Spindle stroke (Z-axis) | 100 mm Overhang | 250 mm Dwsdpfozdy Rzjx Ac Usb Column diameter | 90 mm Machine table (support) | 370 x 300 mm Feed | Manual Motor power | 0.6 / 0.95 kW Spindle speed (stepless) | Variant 1: 125 – 2,400 rpm | Variant 2: 225 – 4,300 rpm Machine weight | approx. 180 kg (net machine weight) Key features & equipment details Mechanically stepless drive: As with the larger sister model, the speed is adjusted steplessly and conveniently during operation via a mechanical control wheel (variator). Digital display: The spindle speed is displayed digitally on a clearly visible display on the head of the machine as standard. Compact size: With a net weight of approximately 180 kg, it is significantly lighter than the ALZSTAR 30/S (approx. 260 kg) and can still be transported or moved relatively easily if required. Safety features: A lockable main switch with motor protection, a locking emergency stop button, and the electrically protected spindle guard are also standard features. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 5,614 h, load capacity: 4,000 kg, lifting height: 4,600 mm, free lift: 2,200 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,150 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27X10-12, overall weight: 10,150 kg, empty load weight: 6,150 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🔧 🕓 Years of experience | 🧰 Own service & paint shop | 🚛 In-house transport | 🤝 After-sales support Looking for a forklift you can rely on? We are a trusted dealer of new and used forklifts, serving clients all over Europe — from small businesses to large industrial plants. Our forklifts are more than just machines — they ensure smooth, safe, and efficient logistics. 🌟 Why choose us? ✅ Full technical inspection (service, filters, oils, key components) ✅ Optional UDT safety certification ✅ In-house paint & repair workshop ✅ EU-wide delivery by our trained drivers ✅ Operator training & test on delivery ✅ Full post-sale service & spare parts ✅ Financing available – invoice in EUR or PLN ✅ Hundreds of satisfied European clients 🚜 OFFER: Dedpfxozxr H De Ac Uewb COMBILIFT C4000 – Four-way / Multi-directional Forklift 📅 2019 | ⏱ 5,614 h | ⚙️ GAS | 🏋️ 4,000 kg | 📏 Duplex Mast 4,600 mm 🔩 Fork positioner 1,150 mm | Forks 1,200 mm 🛞 Superelastic tyres (100%) | Free lift 2,200 mm 💯 Condition: Excellent – fully serviced & tested 📐 Dimensions: H: 2,400 mm | L: 2,400 mm | W: 2,250 mm Ideal for narrow aisles, long loads, wood, steel, or tube industries — suitable indoors & outdoors. FT LOGISTICS – Quality you can rely on. Service you can trust. 💼

Condition: like new (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,800 mm, total length: 1,500 mm, total width: 1,700 mm, overall weight: 1,550 kg, The machine comes from a training workshop and has hardly ever been used. Condition: Like new. Dwodpfx Aszq Hzysc Usb

Condition: used, mileage: 310,000 km, power: 120 kW (163.15 HP), first registration: 05/2018, fuel type: diesel, overall weight: 3,500 kg, color: red, gearing type: mechanical, emission class: euro6, number of seats: 9, total length: 5,926 mm, total width: 1,993 mm, total height: 2,357 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, For sale is a Mercedes-Benz Sprinter 316 long-wheelbase, 9-seater, equipped with the globally popular 2.1-liter diesel engine. * The vehicle is in good condition! * German vehicle * Euro 6 standard * Second owner * Regularly maintained * M1 passenger car registration * VAT can be shown separately Equipment: Combination version * Long-wheelbase * 9 seats * Air conditioning front + rear * Auxiliary heater * Rear view camera * Tow hitch * Increased towing capacity 2.8T * Sliding windows left and right * Passenger airbag * Heated exterior mirrors * Electric exterior mirrors * Electric windows Dwsdpfozq Twbox Ac Ueb * Central locking * and more... Technical data: Permissible total weight: 3500 KG * Unladen weight: approx. 2350 KG * Payload: 1150 KG * Towing capacity: 2800 KG Why are we the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transfer license plates (5-day/customs registration) usually on the same day * Airport or train station pick-up service All vehicles are professionally detailed and hygienically cleaned! Special features: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage polishing on the exterior * If necessary, paint correction and Smart Repair All our vehicles have also undergone a thorough service. Of course, this includes new fluids, filters, and other expenses that you don't need to worry about. Optionally, we can have the vehicle inspected at an independent testing center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments, or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found on Special equipment: Trailer socket 13-pin, Audio system Audio 15 (radio with color display), Outside temperature display, Window in load/passenger compartment: - sliding, front left, Window in load/passenger compartment: - sliding, front right, Remote control for auxiliary heater, Master key additionally, Rear window heated, Fuel tank: main tank 100 liters, Navigation system Becker MAP Pilot, Crossmember with integrated step, Smoker's package, Spare wheel in driving condition, Spare wheel carrier under frame end incl. jack, Interior mirror, Seat equipment: Isofix child seat system, Seat equipment: Comfort headrest, passenger seat, Seat equipment: Comfort headrest, driver's seat, Seats in the cab: Passenger double seat, Seats in the cab: Passenger seat heated, Seats in the cab: Driver's seat heated, Seats in the cab: Suspension seat Comfort, driver's side, Seats in the load/passenger compartment: 1st row, 3-seater bench, narrow, Comfort headrests passenger compartment, Seats in the load/passenger compartment: 2nd row, 3-seater bench, Comfort headrests passenger compartment, Stabilizer rear, Stabilizer front reinforced, Start/Stop system engine, Shock absorbers reinforced, Tank sensor for auxiliary heater, Non-woven battery 95 Ah, Front axle reinforced, Auxiliary heater (hot water) 10 kW with timer, additional heat exchanger Additional equipment: 3rd brake light, Storage: Luggage net on rear doors, Storage net on front seat backrest left, Storage net on front seat backrest right, Adaptive brake light, Airbag passenger

Condition: good (used), mileage: 188,060 km, power: 95 kW (129.16 HP), first registration: 11/2012, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel, number of seats: 3, total length: 6,100 mm, total width: 2,000 mm, total height: 2,750 mm, loading space length: 3,330 mm, loading space width: 1,770 mm, loading space height: 1,960 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, trailer coupling, = Additional options and accessories = - Heated mirrors Dsdpezti A Eefx Ac Uswb - Halogen lamp - None - Manual - Fabric - Partition = Notes = Configuration: 4x2, Payload: 1287 kg, Tare weight: 2213 kg, Gross vehicle weight: 3500 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2000 kg, Trailer coupling, Type of cabin: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition, Color: White, Heated mirrors, Lighting type: Halogen lamp, Engine power: 95 kW (127 hp), Fuel: Diesel, Euro: 5, Drive technology: Timing chain, Gearbox type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Extended and raised, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Workshop equipment, Central locking, Seats: 3, Seat arrangement: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, AC cruise control, Spare wheel, Spare wheel tread: 4%, Tire type: Summer tires = Additional information = General information Number of doors: 1 License plate: VP-649-R Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread left: 8 mm; Tire tread right: 8 mm Axle 2: Tire tread left: 4 mm; Tire tread right: 4 mm Weights Unladen weight: 2,213 kg Payload: 1,287 kg GVWR: 3,500 kg Functional Loading area height: 68 cm Maintenance APK (Technical Inspection): valid until 11.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Year of construction: 1997, condition: ready for operation (used), A very well-maintained Forte horizontal band saw is available. Round cutting capacity: 320mm, max. square cutting capacity: 300mm/300mm, saw blade dimensions X/Y/Z: 3660mm/25mm/0.9mm, band speed: 100m/min, max. material feed: 400mm, max. feed length: 4000mm. Machine dimensions X/Y/Z: approx. 1950mm/1500mm/1250mm, weight: approx. 1000kg. Including roller conveyor. The machine was used in a training workshop and is in good condition. Including five bandsaws. Documentation vorhanden. An on-site inspection is possible. Dwsdpfx Acjzka Iyj Ueb

Condition: used, Molding line for filled products such as cordon bleu (fresh weight 100gr) The fresh weight per portion is ± 100 grams. The main components are 48 grams of ground meat 10 grams of processed cheese 10 grams of sausage or ham the rest is breadcrumbs consisting of: “Risco Brevetti” vacuum filler Type RS303 (filler-grinder) with loader for Eurobins with meat grinder heat (Filler-Grinder), Type RS 70 Dwsdpjzzkz Esfx Ac Ueb BJ 2010 filler-grinder opening 2 filling strips on top of each other of 90 x 5 mm + MasterSlice “Marel - Stork” Type 1511 Slicer for sausage or ham bars caliber 50 mm + “Karl Schnell” vacuum filler Type 596 P 10 SE Used to fill the processed cheese linked to the Masterfill + “Marel” MasterFill Type MTFU Takes the processed cheese from the Karl schnell vacuum filler and portion it + “Marel” MasterFormer Type TA1521 Using virtually no pressure, the MasterFormer system produces high quality filled and unfilled products with a handmade look and retention of structure and texture of meat mass. The MasterSlice and MasterFill modules allow solid, liquid and paste fillings to be added to the meat mass in the MasterFormer supply line. The MasterFormer offers a wide variety of end product possibilities with minimal waste of ingredients and maximum flexibility, including cordon bleu or steak haché. Features : · Ultra low-pressure forming, to retain structure and texture of meat mass · Fully automatic production of filled and unfilled products, with a handmade look · MasterSlice adds cut-to-measure slices of solid filling to the basic raw material · MasterFill is used to add liquid or paste fillings · Minimal waste of ingredients · End products can be packed directly onto trays or, alternatively, are ready for further processing · Easy to operate and clean in good condition in good working order The machine is fully inspected and tested both mechanically and electrically. Parts showing visible wear will be preventively replaced in our workshop.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 22,460 h, load capacity: 5,000 kg, lifting height: 3,760 mm, fuel type: diesel, mast type: simplex, construction height: 2,800 mm, empty load weight: 7,250 kg, total length: 3,050 mm, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 600 Mast type: Standard Condition: Ready for operation and fully functional Dwjdpfx Aezzgcroc Usb Technical condition: very good Front tire type: Superelastic Front tire size: 3.00-15 Rear tire type: Superelastic Rear tire size: 2.50-15 Description: In addition to this Linde model, we have approximately 200 heavy-duty forklifts, compact forklifts, and reach trucks in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this H50D-02/600. P.S.: Our forklift workshop specializes in the repair, maintenance, overhaul, and custom modification of forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sales. Side shift, Heater, Full cabin.

Condition: ready for operation (used), sheet width 2025 mm Dwodpfx Acezzrfle Uob plate thickness 3.0 mm distance between columns 2050 mm no. of strokes 38 Hub/min cutting angle 1.38 ° Control konv. total power requirement 4.0 kW weight of the machine ca. 1100 kg dimensions of the machine ca. 2299 x 2000 x 1130 mm Current new price: approx. 20.000 euros From a maintenance workshop Special price available upon request Features: - Robust / high-performance electromechanical sheet metal shear - Manual material backgauge * Infinitely variable adjustment range * Adjustment from the rear - via handwheel * Includes mm scale - 1x side stop - 3x front support arms - 1x freely movable foot switch - rear sheet metal chute - front sheet metal removal for smaller workpieces - digital piece counter - control cabinet - mounted on the front left

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,263 h, load capacity: 5,000 kg, lifting height: 6,000 mm, free lift: 2,700 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,380 mm, fork length: 1,500 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355/50-15, overall weight: 12,200 kg, empty load weight: 7,200 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- Dedpszw Nbpsfx Ac Uewb 🌍 Years of experience | 🛠️ In-house service and paint shop | 🤝 Professional consulting | 🚛 Own transport fleet | 🔧 After-sales support Looking for a forklift you can rely on? We are a trusted dealer of new and used forklifts with years of industry experience. We supply clients across Europe — from small businesses to large international manufacturing plants. Our forklifts are more than just machines — they’re a guarantee of smooth and reliable logistics for your operations. What sets us apart? ✔️ Every forklift undergoes a comprehensive technical inspection (servicing, testing, replacement of filters and oils, refurbishment of key components) 📑 Optional full UDT certification on request 🎨 In-house paint shop and service workshop — forklifts refined both visually and technically 🚛 Europe-wide transport — handled by our own fleet and trained drivers 🎓 Operator training on delivery + functional testing at the customer site 🔧 After-sales service and technical support — we’re here for you even after the purchase 👀 Viewing and test drives available at our headquarters — you’re welcome 🌟 Hundreds of satisfied customers all over Europe — join those who already trust us 💰 Financing support — we work with most leasing companies 💳 Invoice in EUR or PLN — as you prefer OFFERED FOR SALE: COMBILIFT C5000 – Four-way forklift / multidirectional forklift / four-directional drive forklift / multidirectional drive forklift 📅 Year of manufacture: 07/2017 ⏱️ Operating hours: 4,263 h 🔋 Fuel: LPG 🏋️ Load capacity: 5,000 kg 📦 Mast: Triplex – 6,000 mm 📏 Free lift: 2,700 mm 🔩 Fork positioner | Forks 1,500 / 150 / 50 mm 🛞 Superelastic tyres: front 23x10-12, rear 355/50-15 ✅ Technical condition: Excellent – after major service ✨ Visual condition: Well-maintained, corrosion-free, ready for use DIMENSIONS: 📐 Forklift height: 2,600 mm 📏 Overall height (with mast): 3,900 mm ⬆️ Lifting height: 6,000 mm 📦 Overall length: 2,500 mm ↔️ Width: 2,250 mm ⚖️ Weight: 7,200 kg IDEAL FOR: 🏭 Warehouses with narrow aisles 🌲 Timber, steel, and tube industries 📏 Handling of long loads 🏢 Indoor and outdoor operations FT Logistics – Quality we stand behind. Service you can trust.

Condition: used, mileage: 229,000 km, power: 200 kW (271.92 HP), first registration: 10/2015, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,230 mm, loading space width: 2,470 mm, loading space height: 2,097 mm, Year of construction: 2015, Equipment: ABS, electronic stability program (ESP), tail-lift, We are very pleased that our offer has aroused your interest and can already assure you that you will be able to purchase a good and affordable vehicle with a comprehensible service history from us! Certified Dinkel swing-wall body with rear cargo securing system AHK drawbar coupling AHK ball coupling (can be retrofitted) LBW Bär tail lift 15 pallet spaces Special equipment: Front axle load 6.1 t, trailer brake 2-line, trailer coupling: G 145, trailer socket 24V / 15-pin, audio system: CD radio, battery 165 Ah, differential lock rear axle, compressed air unit medium, air horns (2) on the cab roof, cab variant: S (short with extended rear wall), suspension: front springs 6.1 t, electric windows, fire extinguisher, heated windshield, heated fuel filter, fuel tank: 180 L plastic, enhanced engine brake, frame overhang - extension, spare wheel, reversing warning (audible warning signal outside), switch for loading platform, rear crossmember for trailer coupling, seats in the cab: driver's seat armrest, seats in the cab: driver's seat comfort suspended seat, exterior sun visor, voltage converter 24V / 12V 10 A, steel rims 8.25x19.5, storage compartment outside on the frame, underride protection lateral, CB radio preparation Additional equipment: Emission standard EURO 6, axle configuration: 4x2, approach / front mirrors, exhaust pipe to the center of the vehicle, exterior mirrors electrically adjustable, left, cockpit classic, compressed air tank steel, entry two-stage, cab: S ClassicSpace, cab variant: ClassicSpace, suspension: leaf / air, urea tank (AdBlue): 25 L, manual roof hatch (steel), rear axle differential 390, info display 10.4 cm with additional display, body / superstructure: chassis, engine 7.7 L - 200 kW R6 diesel (OM 936), engine compartment encapsulation, wheelbase 4160 mm, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger single seat, fixed, splash guard rear fender, stabilizer rear axle, tachograph / EC control unit, daytime running lights automatic, underride protection rear fixed, underride protection front, immobilizer, permissible total weight 15.00 t GERMAN VEHICLE Dwjdezmpmkjpfx Ac Ujb REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING Upon request, we will be happy to provide you with a LEASING or FINANCING offer. SERVICE TÜV / MOT / UVV LBW / LGS inspection / tachograph inspection / installation of OBU device and service by our AUTHORIZED WORKSHOP. TOLL / ROAD TOLLS Toll can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale in accordance with our terms and conditions. The information on the internet is a non-binding description. It does not represent guaranteed characteristics. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, mileage: 155,000 km, power: 235 kW (319.51 HP), first registration: 01/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 7,350 mm, loading space width: 2,480 mm, loading space height: 2,080 mm, Equipment: ABS, air conditioning, navigation system, parking heater, tail-lift, We are very pleased that our offer has aroused your interest, and we would like to assure you that you can purchase a good and affordable vehicle with a verifiable service history at our company! NEXT GENERATION / NEW MODEL / TOP !!!!! STEERING AXLE SAFEServer body with 4-row rear load securing system NEW TARPAULIN WITH DIGITAL PRINTING AVAILABLE (at extra cost) AIR CONDITIONING NAVIGATION TAIL LIFT 2,000 KG 2 X TOW HITCH Transmission * Opticruise automatic transmission, 2 pedals, 8 gears Assistance systems * Electronic Braking System (EBS) * Adaptive Cruise Control (ACC) * Automatic headlight control * Rear view camera * Hill start assist Lights and Visibility * H7 headlights * Headlight range adjustment * Fog lights * Tinted glass * LED daytime running lights Audio & Communication * Navigation system * Radio * Bluetooth hands-free system Exterior * Air suspension * Axle configuration: 6x2/4 * Aluminum tail lift: BÄR BC2000 S4-C4 * Steerable lift axle * Fifth wheel coupling * Leveling system * Roof hatch * Roof spoiler * Electrically adjustable and heated exterior mirrors * Differential lock * Wind deflectors * Axle load indicator * Connection plug 1x15 pin * Speed limiter Safety * Electronic Stability Program (ESP) * Anti-slip regulation (ASR) * Anti-lock braking system (ABS) * Outside temperature display * Electrically adjustable curb mirror * Wide-angle mirror * Immobilizer * Telematic system Interior * Digital tachograph * On-board computer Dwjdozqxulspfx Ac Usb * Sun visor * Cooler box Comfort * Automatic climate control * Auxiliary heater * Air-suspended driver's seat * Seat heating * Adjustable steering column * Power windows * Central locking Additional equipment * SCR K+G tec sliding tarpaulin body, dimensions L x W x H: 7,350 x 2,480 x 2,080 mm Cargo space * Length: 7,350 mm, Width: 2,480 mm, Height: 2,080 mm * Volume: 37 m³ Tire dimensions * 1st axle: 355/50 R22.5 * 2nd axle: 295/60 R22.5, dual tires * 3rd axle: 295/60 R22.5 Other dimensions and weights * Payload: 15,305 kg * Permissible total weight: 26,000 kg * Fuel tank: 300 l * AdBlue tank: 47 l * Wheelbase: 4,750 mm GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and export documents / EUR 1 and manufacturer's declaration for export. FINANCING Upon request, we will be happy to provide you with a LEASING or FINANCING OFFER. SERVICE TÜV / UVV, tail lift inspection, safety inspection, tachograph inspection, installation of OBU device and service by our BRAND WORKSHOP on site TOLL / ROAD FEES Toll can be booked on site. ACCESS / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale in accordance with our general terms and conditions. The information on the Internet is a non-binding description. It does not represent guaranteed characteristics. The seller is not liable for typographical and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: good (used), Year of construction: 2007, *Description:* Industrial column drill press *CINCINNATI CA NC320V*, year 2007. Made in France. High-end machine for precision drilling in a mechanical workshop. Column-mounted spindle with mechanical speed variation in 2 ranges. Cross table + vise included. Complete machine, available for inspection. *Specifications:* - *Make / Model*: CINCINNATI CA NC 320V 380 - *Year*: 2007 - Serial number 320838 - *Speeds*: 2-range variable speed: 80-625 rpm and 385-3000 rpm - *Spindle*: CM3 or CM4 taper, to be confirmed - *Table*: Cross table + vise, as shown in the photo - *Column*: Column with rack and pinion for motorized up/down movement Dodjzvgn Ropfx Ac Uewb - *Equipment*: Emergency stop, speed chart *Condition*: Very good condition. Recent and robust machine. On a pallet for removal. Testing possible on site. Removal by carrier.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 10,649 h, load capacity: 7,000 kg, lifting height: 5,000 mm, free lift: 1,250 mm, load center: 700 mm, fuel type: diesel, mast type: duplex, construction height: 3,750 mm, motor manufacturer: PERKINS, fork carriage width: 1,500 mm, fork length: 1,400 mm, fork width: 200 mm, fork thickness: 70 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 10.00-20 SE, rear tire type: superelastic tires (black), rear tire size: 10.00-20 SE, overall weight: 19,400 kg, empty load weight: 12,400 kg, total height: 3,400 mm, total length: 5,000 mm, total width: 2,300 mm, color: yellow, Equipment: cabin, lighting, pallet forks, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 📌 Years of experience | 🛠️ In-house service & paint shop | 💼 Professional consultancy | 🚚 Own transport | 🤝 After-sales support Looking for a forklift you can truly depend on? We are an established dealer of new and used forklifts with a longstanding tradition. We serve clients throughout Europe – from small companies to major international industrial facilities. Our forklifts are more than just machines – they are a guarantee that your logistics will operate smoothly and reliably. ⭐ What sets us apart? ✅ Every forklift undergoes a thorough technical inspection (servicing, testing, filter and oil replacement, refurbishment of main components) ✅ Full safety inspection (UDT) available on request ✅ In-house paint and service workshop – machines perfected aesthetically and technically ✅ Europe-wide transport – performed with our own fleet and trained drivers ✅ Operator training at delivery + practical on-site demonstration ✅ After-sales service & technical support – support continues after the sale ✅ Possibility to visit & test the machine at our premises – you are welcome! ✅ Hundreds of satisfied customers across Europe – join those who already trust us ✅ Financing assistance – we cooperate with most leasing companies ✅ Invoice in EUR or PLN – as per customer preference 🔹 Current Offer: BAUMANN GS 70/14/50 – 7 T Side Loader 📅 Year of manufacture: 2007 ⏱️ Operating hours: 10,649 h ⚡ Power: Diesel 🏋️ Capacity: 7,000 kg – load centre 700 mm 🗜️ Mast: Duplex – 5000 mm 🔧 Forks: 1200 mm 🛞 Superelastic tyres: 100% condition 🛠️ Technical condition: Excellent – after full service ✨ Visual condition: Well-maintained, rust-free, ready for work 📏 Free lift: 1250 mm Dimensions: Dsdpfxozva S Ns Ac Ujwb 📐 Truck height: 3400 mm 📐 Total length: 5000 mm 📐 Width: 2300 mm 📐 Fork positioner width: 1500 mm 📐 Overall height: 3750 mm 🏭 Ideal applications: Warehouses with narrow aisles Wood, steel, and pipe industries Handling of long goods Both indoor and outdoor operations

Condition: used, Year of construction: 2021, functionality: fully functional, Extraction ducting, purchased on March 24, 2021, for the wood workshop extraction system. Piping/ducting system for connecting multiple woodworking machines to a central or decentralized extraction system. Total length of ducting (approximate dimensions): 300 mm pipe diameter → approx. 20 m 250 mm pipe diameter → 1.5 m + approx. 7 m hose 200 mm pipe diameter → approx. 2 m 160 mm pipe diameter → approx. 18 m 140 mm pipe diameter → approx. 1.5 m 120 mm pipe diameter → approx. 5 m 100 mm pipe diameter → approx. 6 m Extraction flaps: 300 mm → 1x 250 mm → 1x 160 mm → 4x 140 mm → 1x 120 mm → 2x 100 mm → 2x Dwsdpfx Acozuyz Io Usb Key technical data: - Machine type: Extraction ducting / piping system for chip and dust extraction - Application area: Connection of woodworking machines, extraction points, and extraction system - Function: Collection and removal of wood chips and dust from the workshop - System components: Pipes, elbows, branches, dampers, brackets, and connecting pieces - Material / design: Workshop ducting for stationary extraction technology - Use: Connection of multiple machines such as saws, planers, milling machines, and sanding machines - Advantage: supports a clean, safe, and efficient workshop operation - Particularly interesting in combination with an extraction system or for workshops under construction/renovation - Relevant accessory package for multiple stationary machines - Useful addition for woodworking shops, carpentry shops, training workshops, and makerspaces No warranty

Condition: used, Year of construction: 2021, functionality: fully functional, power: 3.3 kW (4.49 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 410 mm, cutting width (max.): 480 mm, Equipment: CE marking, motor brake, Felder FB 510 vertical band saw, purchased on May 26, 2021, for cutting curves, making lengthwise cuts, and creating shaped cuts in wood and wood-based materials. A robust workshop machine for cutting to size, model making, furniture construction, and training purposes. Key technical data: - Machine type: Vertical band saw - Model: Felder FB 510 - Cutting height: approx. 410 mm Dodpfxjzun Szo Ac Uswb - Cutting width / throat: approx. 480 mm - Roller diameter: approx. 500 mm - Table size: approx. 500 x 640 mm - Table tilt: approx. -10° to +45° - Band saw blade length: approx. 4318 mm - Band saw blade width: approx. 6–25 mm - Cutting speed: approx. 1100 m/min or 1450 m/min, depending on the model - Motor power: approx. 3.3 kW - Dust extraction: 2 dust extraction ports - Weight: approx. 250 kg - Versatile machine for curve cuts, contour cuts, ripping, and general cutting - Suitable for solid wood and wood-based materials - Of interest to woodworking shops, model makers, training centers, and makerspaces No guarantee.

Condition: used, Year of construction: 2021, functionality: fully functional, Felder/Hammer edge sanding machine HS 950 for edge, surface, and contour sanding in woodworking shops. Suitable for finishing workpiece edges, moldings, frames, and wood components. Key technical data - Machine type: Edge sanding machine / oscillating belt sander - Model: Hammer HS 950 / Felder HS 950; according to the inventory note, the model is not clearly identifiable. - Sanding belt dimensions: approx. 2515 x 150 mm - Sanding table length: approx. 950 mm - Sanding belt speed: approx. 17 m/s - Motor power: approx. 2.2 kW - Table height adjustment: approx. 0–150 mm - Sanding unit tilt: approx. 45°–90° or continuously adjustable up to 90° - Dust extraction port: approx. 120 mm - Dimensions: approx. 1540 x 530 x 1235 mm - Weight: approx. 165 kg Dodpfx Aceztxqfj Uswb Features - Switchable oscillation for a uniform sanding pattern and longer sanding belt life - A useful addition for clean edge processing and finishing work - Of interest for carpentry shops, training workshops, and woodworking shops No guarantee.

Condition: used, Year of construction: 2021, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, saw blade guard, scorer, Format panel saw / table saw Format4 Kappa 550 by Felder, purchased on May 26, 2021, for precise longitudinal, cross, and miter cuts in wood and panel materials. Professional saw for carpentry, interior design, and workshop use. Key technical data: Djdezuywiopfx Ac Ujwb - Machine type: Format panel saw / table saw - Saw blade diameter: 250–550 mm - Max. cutting height: approx. 202 mm at 90° / approx. 140 mm at 45° - Swivel range of the saw unit: 0°–46° - Cutting width: depending on the model, approx. 1000 / 1250 / 1600 mm - Cutting length: depending on the model, approx. 2200–3700 mm - Speeds: 3000 / 4000 / 5000 rpm, optionally infinitely variable 2000–6000 rpm - Motor power: approx. 10 KW - Precise format table for repeatable, accurate cuts - Suitable for solid wood, panel materials, and precise furniture / interior design work - Core machine for professional woodworking shops, carpentry workshops, training workshops, and makerspaces No warranty.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 686 h, load capacity: 1,400 kg, lifting height: 6,000 mm, free lift: 2,030 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, fork length: 1,150 mm, empty load weight: 1,438 kg, drive type: Elektro, Reach truck Load center: 600 Mast type: Triplex Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Dwsdozydf Ujpfx Ac Ujb Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 375Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2022 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing at favorable conditions are available upon request. We will be happy to provide you with competent and detailed advice on our vehicles. Impulse control, initial lift, full free lift, non-marking tires.

Condition: like new (used), Year of construction: 2016, operating hours: 3,641 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, table load: 2,000 kg, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,641 h, spindle motor power: 20,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 38, Equipment: documentation/manual, This HERMLE C400 is in like-new condition and has seen very little use, with only 3641 spindle hours. The machine comes from a repair/prototype workshop and was primarily used to machine plastics and aluminum. The machine is located in our showroom and can be inspected while running! Additional options & accessories: - Air through the spindle. - Heidenhain TS460 measuring probe. - Electronic handwheel. - Approx. 20 HSK-A63 tool holders (in the tool changer). - Manual cabinet roof. - Preparation for mist extraction system. - Coolant gun. - Original HERMLE + Heidenhain documentation. Dwodpozyq Ebsfx Ac Uob Weight & dimensions: approx. 10,000 kg

Condition: excellent (used), mileage: 305,029 km, power: 150 kW (203.94 HP), first registration: 05/2015, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, fuel tank capacity: 200 l, color: red, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel, permissible axle load (axle 1): 2,100 kg, permissible axle load (axle 2): 3,700 kg, Year of construction: 2015, Equipment: air conditioning, airbag, cruise control, electric window regulation, power mirror, second fuel tank, soot filter, General information Number of doors: 2 Cab: single Technical information Number of cylinders: 4 Engine capacity: 2.998 cc Axle configuration Tyre size: 195/75R16 Brakes: disc brakes Suspension: leaf suspension Dwodpewbhpiefx Ac Ujb Front axle: Max. axle load: 2100 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30% Rear axle: Max. axle load: 3700 kg; Tyre profile left inner: 20%; Tyre profile left outer: 20%; Tyre profile right outer: 20%; Tyre profile right outer: 20% Weights Empty weight: 2.200 kg Carrying capacity: 1.300 kg GVW: 3.500 kg Condition Technical condition: very good Visual appearance: very good Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Climate control - Multifunctional Steering Wheel - Particulate filter - Radio/CD player - Spare wheel - Speed limiter - Tachograph - Twin wheel axle - Visor = Remarks = Video working vehicle: Very neat Iveco Daily 50C21 BE Tractor 3.0D 204PK 10,000 KG train weight 305,000 KM

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,963 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,950 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X45-15, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- Dwsdpfx Aezy Nuusc Ueb 🛠️ Years of Experience | 🧰 In-house Service & Paint Shop | 🤝 Expert Consultation | 🚛 Own Transport Fleet | 🔧 Comprehensive After-sales Support Looking for a forklift you can truly rely on? We are a reputable dealer of new and used forklifts, serving the industry for many years. Our customer base spans all of Europe—from small businesses to major industrial facilities. Our forklifts are more than just equipment—they are your assurance of seamless and dependable logistics. -- What sets us apart? -- ✅ Every forklift undergoes a thorough technical inspection and servicing (including checks, tests, oil & filter changes, and component refurbishment) ✅ Full UDT (Office of Technical Inspection) certification available on request ✅ In-house paint and service workshop—machines are optimized both technically and aesthetically ✅ Pan-European delivery—provided by our skilled drivers ✅ Operator training and on-site machine demonstration at handover ✅ Ongoing after-sales technical support—we stay connected post-purchase ✅ On-site viewing and test drives welcomed at our facility ✅ Hundreds of satisfied customers throughout Europe—become one of them today ✅ Financing options available—we collaborate with leading leasing providers ✅ Invoicing in EUR or PLN—as per your preference -- FOR SALE -- COMBILIFT C5000 – Four-Way Forklift Truck 📅 Year of manufacture: 2015 ⏱️ Operating hours: 4,963 h 🔋 Propulsion: GAS / LPG 📦 Load capacity: 5,000 kg 📏 Mast: Duplex – 4,000 mm lift height 🔩 Fork positioner – width: 1,350 mm | Forks: 1,200 mm 🛞 Superelastic tires – 100% condition 🧪 Technical condition: Excellent – fully serviced 🎨 Visual condition: Clean, corrosion-free, and ready for work 📐 Dimensions: - Lowered mast height: 2,600 mm - Total length: 2,500 mm - Overall width: 2,300 mm - Fork positioner width: 1,350 mm - Overall height: 2,950 mm -- Ideal for: -- 🏭 Narrow-aisle warehouse applications 🌲 Timber, steel, and pipe handling industries 📏 Handling long and bulky loads 🏗️ Both indoor and outdoor operations -- FT Logistics – Quality you can depend on. Service you can trust. --

Condition: excellent (used), mileage: 264,217 km, power: 120 kW (163.15 HP), first registration: 03/2020, fuel type: diesel, tire size: 205/75R16, axle configuration: 6x2, wheelbase: 4,330 mm, fuel: diesel, fuel tank capacity: 85 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 6,180 mm, total width: 2,020 mm, permissible axle load (axle 1): 2,000 kg, permissible axle load (axle 2): 2,800 kg, permissible axle load (axle 3): 3,500 kg, loading space volume: 27 m³, loading space length: 5,270 mm, loading space width: 2,310 mm, loading space height: 2,240 mm, Year of construction: 2020, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, navigation system, onboard computer, parking heater, power assisted steering, tail-lift, traction control, General information Cab: single Registration number: VFS-47-J Technical information Number of cylinders: 4 Engine capacity: 2.143 cc Axle configuration Brakes: disc brakes Front axle: Tyre size: 205/75R16; Max. axle load: 2000 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 1: Tyre size: 205/75R16; Max. axle load: 2800 kg; Tyre profile left inner: 20%; Tyre profile left outer: 20%; Tyre profile right outer: 20%; Tyre profile right outer: 20% Rear axle 2: Tyre size: 205/65R17.5; Max. axle load: 3500 kg; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 2.260 kg Carrying capacity: 3.250 kg GVW: 3.500 kg Functional Tail lift: DHOLLANDIA, tail lift, 750 kg Make of bodywork: KUIPER STARLINE Condition Technical condition: very good Visual appearance: very good Other information Cargo space outer length: 527 cm Cargo space outer width: 231 cm Cargo space outer height: 224 cm Dodpoxlt R Djfx Ac Uowb Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Adaptive Cruise Control - Air suspension - Climate control - DAB Radio - Front Assist - Heated door mirrors - Keyless Go - Lane assist - Multifunctional Steering Wheel - Passenger seat - Radio/Cd/Audio system - Reversing camera - Speed limiter - Tachograph - Twin wheel axle - Vehicle heater = Remarks = Video of the vehicle in operation: Mercedes Sprinter 516 CDI BE Combi Clixtar GVW 3500 kg (driving license B) Load capacity 3,300 kg Year of manufacture: 2020 2.2 CDI Automatic Navigation MF Steering wheel Construction/trailer: Kuiper (license plate OS07HG) Heated/parking heater and ventilated load space (Webasto), ideal for transporting plants or possibly converting to a mobile workshop Year of manufacture: 2020 Internal dimensions: Length: 527 cm Width: 231 cm Height: 224 cm Height-adjustable rear springs, ideal for loading docks Dhollandia tail lift 750 kg Demonstrable odometer reading of 239,000 km

Condition: excellent (used), mileage: 274,414 km, power: 120 kW (163.15 HP), first registration: 03/2020, fuel type: diesel, tire size: 205/75R16, axle configuration: 6x2, wheelbase: 4,330 mm, fuel: diesel, fuel tank capacity: 85 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 6,180 mm, total width: 2,020 mm, permissible axle load (axle 1): 2,000 kg, permissible axle load (axle 2): 3,500 kg, permissible axle load (axle 3): 3,500 kg, loading space volume: 27 m³, loading space length: 5,270 mm, loading space width: 2,310 mm, loading space height: 2,240 mm, Year of construction: 2020, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, navigation system, onboard computer, parking heater, power assisted steering, tail-lift, traction control, General information Cab: single Registration number: VFS-34-N Technical information Number of cylinders: 4 Engine capacity: 2.143 cc Axle configuration Brakes: disc brakes Front axle: Tyre size: 205/75R16; Max. axle load: 2000 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 1: Tyre size: 205/75R16; Max. axle load: 3500 kg; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40% Rear axle 2: Tyre size: 205/65R17.5; Max. axle load: 3500 kg; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 2.260 kg Carrying capacity: 3.250 kg GVW: 3.500 kg Functional Tail lift: DHOLLANDIA, tail lift, 750 kg Make of bodywork: KUIPER STARLINE Condition Technical condition: very good Visual appearance: very good Other information Cargo space outer length: 527 cm Cargo space outer width: 231 cm Cargo space outer height: 224 cm Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Adaptive Cruise Control - Air suspension - Climate control - DAB Radio - Front Assist - Heated door mirrors - Keyless Go - Lane assist - Multifunctional Steering Wheel - Passenger seat - Radio/Cd/Audio system - Reversing camera - Speed limiter - Tachograph - Twin wheel axle - Vehicle heater = Remarks = Dwodpfx Acexdtm No Ujb Video of the vehicle in operation: Very neat and complete Mercedes Sprinter 516 CDI BE Combi Clixtar GVW 3500 kg (driving license B) Load capacity 3,300 kg Year of manufacture: 2020 2.2 CDI Automatic Navigation MF Steering wheel Construction/trailer: Kuiper (license plate OS08HG) Heated/parking heater and ventilated load space (Webasto), ideal for transporting plants or possibly converting to a mobile workshop Year of manufacture: 2020 Internal dimensions: Length: 527 cm Width: 231 cm Height: 224 cm Height-adjustable rear springs, ideal for loading docks Dhollandia tail lift 750 kg Demonstrable odometer reading of 274,000 km

Condition: excellent (used), mileage: 255,592 km, power: 120 kW (163.15 HP), first registration: 03/2020, fuel type: diesel, tire size: 205/75R16, axle configuration: 6x2, wheelbase: 4,330 mm, fuel: diesel, fuel tank capacity: 85 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 6,180 mm, total width: 2,020 mm, permissible axle load (axle 1): 2,000 kg, permissible axle load (axle 2): 2,800 kg, permissible axle load (axle 3): 3,500 kg, loading space volume: 27 m³, loading space length: 5,270 mm, loading space width: 2,310 mm, loading space height: 2,240 mm, Year of construction: 2020, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, navigation system, onboard computer, parking heater, power assisted steering, tail-lift, traction control, General information Cab: single Registration number: VFS-46-J Technical information Number of cylinders: 4 Engine capacity: 2.143 cc Axle configuration Brakes: disc brakes Front axle: Tyre size: 205/75R16; Max. axle load: 2000 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 1: Tyre size: 205/75R16; Max. axle load: 2800 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Rear axle 2: Tyre size: 205/65R17.5; Max. axle load: 3500 kg; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 2.260 kg Carrying capacity: 3.250 kg GVW: 3.500 kg Functional Tail lift: DHOLLANDIA, tail lift, 750 kg Make of bodywork: KUIPER STARLINE Condition Technical condition: very good Visual appearance: very good Other information Cargo space outer length: 527 cm Cargo space outer width: 231 cm Cargo space outer height: 224 cm Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Adaptive Cruise Control - Air suspension - Climate control - DAB Radio - Front Assist Dwjdpfx Aoxdtqhec Ueb - Heated door mirrors - Keyless Go - Lane assist - Multifunctional Steering Wheel - Passenger seat - Radio/Cd/Audio system - Reversing camera - Speed limiter - Tachograph - Twin wheel axle - Vehicle heater = Remarks = Video of the vehicle in operation: Very neat and complete Mercedes Sprinter 516 CDI BE Combi Clixtar GVW 3500 kg (driving license B) Load capacity 3,300 kg Year of manufacture: 2020 2.2 CDI Automatic Navigation MF Steering wheel Construction/trailer: Kuiper (license plate OS09HG) Heated/parking heater and ventilated load space (Webasto), ideal for transporting plants or possibly converting to a mobile workshop Year of manufacture: 2020 Internal dimensions: Length: 527 cm Width: 231 cm Height: 224 cm Height-adjustable rear springs, ideal for loading docks Dhollandia tail lift 750 kg Demonstrable odometer reading of 255,000 km