Used Training Workshop for sale (7,033)

Condition: used, Weiss Type: WT3-480/60 Weiss Temperature Test Chamber WT3-480/60 EX / ATEX – explosion-proof test chamber Water-cooled version With digital control and touch panel Temperature range: -60 °C to +160 °C For sale is a used temperature test chamber from the manufacturer Weiss Umwelttechnik GmbH. The system has an explosion-proof test chamber and is suitable for industrial temperature tests within the permissible operating conditions. ATEX explosion protection: Marking according to the nameplate: II 2/- G IIB T3 Gb/- Test chamber explosion-proof CE 0044 The permissible operating conditions are determined by the manufacturer's documentation. Control panel "Touch Panel" Control and operating functions as well as temperature programs can be called up and set via the touch panel. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WT3-480/60 Device type: Temperature test chamber Version: EX / ATEX – Test chamber explosion-proof Cooling: water-cooled Humidity control: not available Test chamber volume: approx. 480 liters External dimensions without door fittings: Height: approx. 2050 mm Width: approx. 1000 mm Depth: approx. 2480 mm External dimensions with hinges and door handle: Height: approx. 2050 mm Width: approx. 1100 mm Depth: approx. 2480 mm Overall depth including touch panel: Bljdpfx Afs Ad Iy Iemjp approx. 2600 mm Internal dimensions: Height: approx. 920 mm Width: approx. 800 mm Depth: approx. 650 mm Note on dimensions: The specified dimensions are reference values for the explosion-proof WEISS 480-liter series. Deviations are possible in this special version. Data for temperature tests: Temperature range: -60 °C to +160 °C Temperature change rate: Heating: approx. 4.04 K/min Cooling: approx. 1.42 K/min Measured values according to the workshop report. Data for operation: Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.0 kW Rated current: 30.0 A Refrigerant: R404A – 3.5 kg R23 – 1.2 kg Refrigeration system: Max. low pressure: 18 bar g Max. high pressure: 25 bar g Standing pressure: 8.5 bar g Equipment: Digital control with touch panel Test chamber lighting Network interface according to workshop report Water-cooled refrigeration system Explosion-proof test chamber Weight: approx. 930 kg Reference value of the explosion-proof WEISS 480-liter series For your safety as a buyer, the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. A workshop report is available for this device. Temperature functions and other test points have been documented. According to the workshop report, the cooling function has been repaired. The buffer battery has been replaced. Work has been carried out on the display cabling. Details according to the workshop report. Condition: used Scope of delivery: (See picture) Shipping by forwarding agent possible upon request. (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, mileage: 441,454 km, power: 265 kW (360.30 HP), first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 8,800 mm, loading space width: 2,470 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), We are very pleased that our offer has aroused your interest and would like to assure you that you can purchase a good and affordable vehicle with a verifiable service history at our dealership! Sliding tarp Edscha STEERING AXLE !!! REAR OVERHANG 5,500 mm REARVIEW CAMERA FULLY AIR-SUSPENDED STANCHION POCKETS Special equipment: Front axle load 8.0 t, trailer coupling: Rockinger towing coupling, battery 220 Ah, compressed air connection in the cab, high-mounted compressed air unit, compressed air horn, driver assistance system: brake assistant (Active Brake Assist), fuel tank: 390 liters aluminum, 2-cylinder air compressor, enhanced engine brake, steered trailing axle, liftable, acoustic reversing warning (external warning signal), circuit breaker, seats in the cab: driver's seat, comfort suspension seat, external sun visor, 12V socket in the passenger footwell, additional 24V socket in the passenger footwell Additional equipment: Emission standard EURO 6, axle configuration: 6x2, trailer brake 2-line, connections on the left, trailer socket 24V / 15-pin, Antos, audio system: radio with USB connection, exhaust to the right outside, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air tank steel, driver assistance system: lane keeping assist, cab: width 2.30 m, cab: hydraulic tilting mechanism, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: air / air (fully air-suspended), power windows, tinted windshield, generator 100 A, gearbox 12-speed - type: G 211-12, urea tank (AdBlue): 60 liters, manual sunroof (steel), rear axle bevel gear 440, info display 10.4 cm, body / structure: chassis, comfort central locking system, steering assist pump unregulated, air intake from the front, engine 10.7 liters - 265 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tires, ramp mirrors, spare wheel, waste heat recovery, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger swivel seat, front splash guard, front axle stabilizer, additional stabilizer, rear axle / trailing axle, 24V socket in the cab, tachograph / EC control unit, underbody fairing aerodynamically shaped, underrun protection front, preparation for toll collection, front axle cambered, regulated water pump, permissible total weight 26.00 t Blsdpfx Afsza N Rkemop GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING If desired, we will gladly provide you with a LEASING or FINANCING offer. SERVICE TÜV / MOT / UVV LBW / LGS inspection / tachograph test / installation of OBU device and service by our AUTHORIZED WORKSHOP. TOLL / ROAD CHARGES TOLL can be booked on-site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale in accordance with our general terms and conditions. The information on the internet is a non-binding description. It does not constitute guaranteed properties. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min Bledpfx Ajzbc Daefmep bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: ready for operation (used), L & Z Lathe / WEILER CONDOR VS 2 with new 3-axis digital readout from training workshop - 3-axis digital readout "NEW" - Center height: 165 mm - Swing diameter over bed: 330 mm - Center distance: 800 mm - Speed range: 28 - 2800 rpm - Automatic longitudinal / cross feeds - Spindle bore - Tailstock with center - Collets / quick-clamping device incl. 25 collets - 3-jaw chuck Röhm 200 mm with reversible jaws - Multifix / new with insert - Work light Bsdpsy Ral Isfx Afmjlp - Emergency stop - Bed stop - Machine feet - Documentation Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900 kg Subject to errors and input mistakes.

Condition: used, mileage: 75,000 km, power: 184 kW (250.17 HP), first registration: 01/2021, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,350 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, navigation system, parking heater, We are very pleased that our offer has sparked your interest and can already assure you that you can purchase a good and affordable vehicle with a transparent service history from us! MAN TGL 12.250 / 6-cylinder engine Meiller 3-sided tipper body with raised side panels Load protection grille, front Meiller body: 4,000 x 2,350 x 600 mm Air conditioning Auxiliary heater Rear view camera Sun visor 3 seats Tow hitch, pintle hook Tow hitch, ball hitch Additional Duomatic connection Hydraulic connection for tipping trailer Glazed rear wall of the cab Dual-lane driving Blodpfx Afjy Rc Npomep Work lights GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING Upon request, we will be happy to provide you with a LEASE-PURCHASE or FINANCING OFFER. SERVICE MOT / UVV LBW / LGS inspection / Tachograph inspection / Installation of OBU device and service by our BRANDED WORKSHOP before delivery. TOLL / ROAD CHARGES Toll can be booked on site. TRAVEL / DISTANCES Wittlich train station: 500 m away Frankfurt Airport: 150 km away Frankfurt-Hahn Airport: 40 km away Luxembourg Airport: 75 km away Sale in accordance with our general terms and conditions. The information on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, featuring a 3-axis digital display from Elesta, from a training workshop!! Technical data: >> Machine no. 88-8115, year of manufacture 1988 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm Bjdpfx Afsy Tmkvomjlp >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Elesta >> Quick-change tool post, internal and external collets (see picture) >> 1 three-jaw chuck, 1 set of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Follow rest >> Machine feet About the machine: A Weiler Matador VS-2 in very good condition is offered for sale. The machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs smoothly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,010 mm, working width: 1,510 mm, working height: 100 mm, travel distance X-axis: 3,010 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 100 mm, cutting speed: 100 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,100 kg, power: 1.5 kW (2.04 HP), input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 5,230 kg, total length: 4,921 mm, total width: 2,225 mm, total height: 2,317 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF1530NP 6kW fully enclosed compact fiber laser cutting machine The SENFENG SF1530NP 6kW is a fully enclosed, compact fiber laser cutting machine designed for efficient and precise sheet metal processing. With a working area of 1500 × 3000 mm, it is ideal for workshops, job shops, and manufacturing companies looking for a space-saving, safe, and reliable laser cutting solution. Bodpfszd Dz Rox Afmjlp The machine is equipped with a 6kW MAX fiber laser source, a RayTools laser cutting head, and a BOCHU CNC laser cutting system. It is suitable for cutting stainless steel, carbon steel, aluminum, brass, and other metal sheets. The compact design, along with the integrated laser source and integrated control cabinet, reduces the required floor space without compromising stable cutting performance. Technical highlights: • Working area: 1500 × 3000 mm • Laser power: 6kW • MAX fiber laser source • RayTools or Precetic laser cutting head • BOCHU CNC laser cutting system • X/Y positioning accuracy: ±0.05 mm • X/Y repeatability accuracy: ±0.02 mm • Maximum speed: up to 100 m/min • Maximum acceleration: 0.8G • Maximum table load: 1100 kg • Machine dimensions: approx. 4921 × 2225 × 2317 mm • Machine weight: approx. 5230 kg • Power supply: 3-phase, 380V / 50Hz • Protection class of power supply: IP54 The fully enclosed design increases operational safety and supports better smoke and dust control. The pull-out work table facilitates loading and unloading as well as the removal of residual material. The automatic gas distribution system enables precise control of nitrogen, oxygen, and compressed air, reducing manual adjustments. Typical applications include sheet metal processing, mechanical engineering, signage, kitchen and stainless steel fabrication, lighting manufacturing, control cabinet construction, automotive parts, and general metal processing. SENFENG Germany has its own after-sales team and offers installation, commissioning, operator training, and technical service. In addition, a local spare parts warehouse is available in Germany to enable rapid service support and reduce potential downtime. The SF1530NP 6kW is a practical solution for customers looking for a compact design, safe operation, reliable cutting quality, and professional local service.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC control in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, Machine No. 347140 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Rapid traverse Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Blodpfxjz Eh Uze Afmjp Accessories and equipment: >> Heidenhain TNC 320 CNC control >> Hydraulic chuck vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a tool milling machine Kunzmann WF4/3 with a Heidenhain TNC 320 CNC control. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control. Furthermore, the machine has a hydraulic chuck in both vertical and horizontal positions. Changing from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Kunzmann on site while it is powered up. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE-compliant, from a training workshop! Technical data: Blsdez Eh Tqspfx Afmsp >> Year of manufacture 2008, machine no. 347139 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Changing from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on site while it is powered up. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE compliant, from a training workshop! Technical data: >> Year of manufacture 2008, Machine No. 347142 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system Bsdpfxjz Eh T Do Afmjlp >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic chuck, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic chucks for vertical and horizontal operation. Changing from vertical to horizontal operation is very easy by folding down the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site with power connected. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: used, functionality: fully functional, control type: manual, degree of automation: manual, actuation type: manual, sheet thickness (max.): 1 mm, Manual guillotine shear JÖRG 4111 with a robust, heavy-duty workshop construction. Designed for precise manual cutting of sheet metal. This machine is suitable for metalworking workshops, maintenance departments, small-series production, and vocational training facilities. Technical specifications: • Manufacturer: JÖRG • Model: 4111 • Machine type: manual mechanical guillotine shear • Maximum cutting length: 1,020 mm • Maximum cutting capacity in mild steel: 1.0 mm • Maximum cutting capacity in aluminum: approximately 2.0 mm • Manual operation – no electrical connection required • Robust, stable workshop construction • Compact design • New cutting blades installed Bedpfx Afez Dqywomelp The machine is used and shows normal signs of previous industrial use. Overall visual condition is good. A simple, reliable, and economical machine for straight cutting of sheet steel, aluminum, and other thin sheet materials. Internal reference: 48979-113 The machine is located in Latvia and is available immediately. Loading assistance is available. Transport within the Baltic States and to other European countries can be arranged upon request. The machine is sold as shown in the photographs. Inspection is possible by prior appointment.

Condition: used, Year of construction: 2021, functionality: fully functional, Felder/Hammer edge sanding machine HS 950 for edge, surface, and contour sanding in woodworking shops. Suitable for finishing workpiece edges, moldings, frames, and wood components. Key technical data - Machine type: Edge sanding machine / oscillating belt sander - Model: Hammer HS 950 / Felder HS 950; according to the inventory note, the model is not clearly identifiable. - Sanding belt dimensions: approx. 2515 x 150 mm - Sanding table length: approx. 950 mm - Sanding belt speed: approx. 17 m/s - Motor power: approx. 2.2 kW - Table height adjustment: approx. 0–150 mm - Sanding unit tilt: approx. 45°–90° or continuously adjustable up to 90° - Dust extraction port: approx. 120 mm - Dimensions: approx. 1540 x 530 x 1235 mm Bledpfjztxqfjx Afmsp - Weight: approx. 165 kg Features - Switchable oscillation for a uniform sanding pattern and longer sanding belt life - A useful addition for clean edge processing and finishing work - Of interest for carpentry shops, training workshops, and woodworking shops No guarantee.

Condition: used, mileage: 86,000 km, power: 130 kW (176.75 HP), first registration: 11/2020, fuel type: diesel, overall weight: 7,490 kg, gearing type: automatic, emission class: euro6, loading space length: 4,450 mm, loading space width: 2,250 mm, loading space height: 2,050 mm, Equipment: ABS, central locking, tail-lift, We are delighted that our offer has aroused your interest and assure you that you can purchase a good and affordable vehicle with a comprehensible service history from us! MB ATEGO 818 BOX TRUCK Rear axle with air suspension Bsdpfx Afszt Ewremolp Engine brake Tail lift BÄR / 1600mm, leaf spring type Load securing system Removable securing system in the longitudinal direction, 3-fold Rear view camera Tires 215 / 75 / 17.5, like new GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and the manufacturer’s declaration for export. FINANCING Upon request, we will gladly provide you with a LEASING or FINANCING offer. SERVICE TÜV / MOT inspection / UVV LBW / LGS inspection / Tachograph inspection / Installation and service of OBU device by our BRANDED WORKSHOP prior to delivery. TOLL / ROAD CHARGES Toll can be booked on-site. TRAVEL / DISTANCES Wittlich train station is 500 m away. Frankfurt Airport is 150 km away. Frankfurt-Hahn Airport is 40 km away. Luxembourg Airport is 75 km away. Sale in accordance with our general terms and conditions. The information on the internet is a non-binding description and does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, mileage: 150,000 km, power: 130 kW (176.75 HP), first registration: 11/2020, fuel type: diesel, overall weight: 7,490 kg, gearing type: automatic, emission class: euro6, loading space length: 4,450 mm, loading space width: 2,250 mm, loading space height: 2,050 mm, Equipment: ABS, central locking, tail-lift, We are delighted that our offer has aroused your interest and assure you that you can purchase a good and affordable vehicle with a comprehensible service history from us! MB ATEGO 818 BOX TRUCK Rear axle with air suspension Engine brake Tail lift BÄR / 1600mm, leaf spring type Load securing system Removable securing system in the longitudinal direction, 3-fold Rear view camera Tires 215 / 75 / 17.5, like new GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and the manufacturer’s declaration for export. FINANCING Blodpoztudzjfx Afmep Upon request, we will gladly provide you with a LEASING or FINANCING offer. SERVICE TÜV / MOT inspection / UVV LBW / LGS inspection / Tachograph inspection / Installation and service of OBU device by our BRANDED WORKSHOP prior to delivery. TOLL / ROAD CHARGES Toll can be booked on-site. TRAVEL / DISTANCES Wittlich train station is 500 m away. Frankfurt Airport is 150 km away. Frankfurt-Hahn Airport is 40 km away. Luxembourg Airport is 75 km away. Sale in accordance with our general terms and conditions. The information on the internet is a non-binding description and does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, stroke length: 265 mm, throat depth: 410 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 6, table height: 900 mm, oil tank capacity: 250 l, overall weight: 12,500 kg, total length: 6,450 mm, total width: 2,650 mm, total height: 2,750 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, number of support arms: 2, pressing force: 175 t, clearance between the columns: 3,600 mm, distance table to ram: 530 mm, table length: 4,050 mm, table width: 104 mm, type of input current: three-phase, Equipment: CE marking, safety light barrier, 2013 Durma AD-S 40175 CNC Press Brake – 6 Axis – Cybelec ModEva 10S Control Used 2013 Durma AD-S 40175 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Cybelec ModEva 10S graphic control, Y1, Y2, X, R, Z1 and Z2 axes, CNC motorised crowning, laser guards, tooling and rear safety doors. Manufacturer: Durma Bsdpfx Aoz Imc Nefmelp Model: AD-S 40175 Axes: 6 Year: 2013 Capacity: 4000mm x 175T Control: Cybelec ModEva 10S Control Includes: Large Selection of Top & Bottom Tooling Description 2013 Durma AD-S 40175 CNC Press Brake, a high-quality 6-axis CNC hydraulic press brake with 4050 mm bending length and 175 tonne bending force. This machine is ideal for precision sheet metal bending, fabrication workshops, engineering companies, subcontract metalwork and production environments requiring a robust, accurate and well-specified press brake. This Durma AD-S 40175 is fitted with a Cybelec ModEva 10S Graphic CNC Control, offering 3D graphical programming and automatic bend sequences. The machine has 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2, giving excellent flexibility for accurate bending and efficient backgauge positioning. The machine is in very good condition and comes complete with a large selection of Euro-style top and bottom press brake tools, laser guards, foot pedal, CNC controlled motorised crowning, quick-release top tool clamps and rear safety doors. Key Features Bending length: 4050 mm Bending force: 175 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Cybelec ModEva 10S Graphic CNC Control Condition: Very good condition Crowning: CNC controlled motorised crowning Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications Model: AD-S 40175 Bending force: 175 tonnes Bending length: 4050 mm Distance between columns: 3600 mm Y-axis rapid speed: 120 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 100 mm/s Crowning: Motorised Daylight: 530 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 Backgauge finger blocks: 2 X-axis travel speed: 500 mm/s X-axis travel: 650 mm R-axis travel speed: 350 mm/s R-axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 litres Machine dimensions: 6450x2650x2750 mm Machine weight: 12,500 kg Cybelec ModEva 10S Graphic CNC Control The machine is fitted with a Cybelec ModEva 10S Graphic CNC Control, a user-friendly press brake control designed for graphical programming and efficient bending setup. Control features include: 3D graphical control interface 10.4” colour TFT screen 128 MB RAM 128 DM main memory Easy Cursor operation Automatic bend sequence calculation Single-page part programming capability CAD/CAM sequence viewing support Included Equipment This used Durma AD-S 40175 press brake is supplied with: 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Cybelec ModEva 10S Graphic CNC Control Large Selection of Euro-style top & bottom tooling CNC controlled motorised crowning Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Front support arms Backgauge finger blocks

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,446 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,500 mm, load center: 400 mm, fuel type: gas, mast type: triplex, construction height: 2,350 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 800 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: superelastic tires (black), rear tire size: 23 X 10 - 12, overall weight: 7,200 kg, empty load weight: 4,700 kg, total height: 2,350 mm, total length: 1,900 mm, total width: 1,950 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🔧 Years of Experience | 🛠 In-house Service & Paint Facility | 💼 Professional Consultation | 🚚 Own Transport Fleet | 🤝 After-Sales Support Are you seeking a forklift you can rely on? We are a reputable dealer of new and used forklifts, backed by many years of experience and tradition. We serve clients across Europe – from small enterprises to major international industrial sites. Our forklifts are not just machines – they are your assurance of smooth and dependable logistics. 🌟 Why choose us? ✅ Each forklift undergoes a thorough technical overhaul (inspection, testing, oil and filter replacement, refurbishment of key components) ✅ Optional full safety certification (UDT) upon request ✅ In-house paint shop and service workshop – forklifts finished to the highest technical and visual standards ✅ Europe-wide transport, handled by our own fleet and trained drivers ✅ Operator training upon delivery + full onsite functionality check at your location ✅ After-sales and technical support – we stand by our customers post-sale ✅ On-site viewing and testing of machines – you are always welcome! ✅ Hundreds of satisfied clients across Europe – join those who already trust us ✅ Financing available – we work with leading leasing companies ✅ Invoice available in EUR or PLN – at your preference 🚀 Currently available: COMBILIFT C2500 – 4-Way Compact Forklift ✅ Year of manufacture: 2012 ✅ Operating hours: 2,446 ✅ Fuel: LPG ✅ Lifting capacity: 2,500 kg ✅ Mast: Triplex – 4,900 mm ✅ Fork positioner 1200 mm | Telescopic forks 800 mm ✅ Superelastic tyres – 100% condition ✅ Technical condition: Excellent – fully serviced ✅ Visual condition: Clean, rust-free, ready to work ✅ Free lift: 1,500 mm 📐 Dimensions: Blodpfx Aez Stclofmop Height: 2,350 mm Overall length: 1,900 mm Width: 1,950 mm Positioner width: 1,200 mm Overall height: 2,350 mm 🏭 Ideal for: Narrow aisle warehouses Wood, steel, and pipe industries Handling long loads Indoor and outdoor use ✨ FT Logistics – Quality you can rely on. Service you can trust.

Condition: good (used), mileage: 57,806 km, power: 140 kW (190.35 HP), first registration: 02/2019, fuel type: diesel, tire size: 205/75R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 2, total length: 6,150 mm, total width: 2,020 mm, total height: 2,700 mm, loading space length: 1,980 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, electric window regulation, navigation system, parking heater, power mirror, tachograph, traction control, trailer coupling, = Additional Options and Accessories = - Halogen lamp - None - Manual - Rear-view camera - Lane keeping assist - Seat cover = Notes = Configuration: 4x2, twin tires, unladen weight: 3154 kg, gross vehicle weight: 3500 kg, trailer coupling, cabin type: single cab, tachograph (control unit), air conditioning, number of airbags: 2, auxiliary heater, parking assistance: None, electric windows, electric mirrors, GPS navigation, color: white, rear-view camera, lighting type: halogen lamp, lane keeping assist, Bluetooth, flashing lights, engine power: 140 kW (188 hp), displacement: 2987 cc, fuel: diesel, Euro: 6, drive technology: timing chain, transmission type: manual, gears: 6, power steering, ABS, ASR, starter battery, side paneling, rear step, roof rack: None, side doors: 1, rear closure: double door, workshop equipment, central locking, number of seats: 2, seat arrangement: 1+1, seat cover: seat cover, seat adjustment: manual, L2H2 N1 V6 3.0Ltr Airco 190Pk Euro6 Dubbellucht Mf-Stuurwiel 1e Eigenaar Uniek!, spare wheel, tire type: all-season tires = Further Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 205/75R16 Brakes: disc brakes Bodpfxjz S T H De Afmjlp Suspension: leaf spring suspension Axle 1: Tire tread depth left: 8 mm; Tire tread depth right: 8 mm Axle 2: Twin tires; Tire tread depth left inside: 7 mm; Tire tread depth left outside: 8 mm; Tire tread depth right inside: 8 mm; Tire tread depth right outside: 8 mm Weights Unladen weight: 3,154 kg Payload: 346 kg GVWR: 3,500 kg Functional Loading area height: 70 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 415 € per month (delivery van, 72 months); Please inquire for more information and conditions.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, color channels: 8, 2013 ARIZONA 3M FLATBED PRINTER 480XT Superb condition UV flatbed printer Also includes 2.2 M roll unit for different substrates on roll -banners etc 3M x 2.5M bed great for high quality up to 10x5ft boards Blodoz Sup Hjpfx Afmep 8 colour channels CMYK C M 2xwhite all heads perfect Low print count only 50,781 prints from new & been on Canon service contract Delivery install training and warranty in UK Packing, locked down and loaded for export Available now

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, color channels: 6, REDUCED FOR QUICK SALE SPACE NEEDED 1/11/26 IN PRODUCTION NOW 2016 ARIZONA 3x2.5M 1260XT FLATBED PRINTER Superb condition UV flatbed printer Blodpfx Afjz Suv Tsmjp Also includes 2.2 M roll unit for different substrates on roll -banners etc 3M x 2.5M bed great for high quality up to 10x5ft boards 6 colour channels CMYK 2xwhite all heads perfect Pneumatic PIN registration. Self cleaning option installed VERY Low print count only 27,794 prints from new & been on Canon service contract Delivery install training and warranty in UK OR Packing, locked down and loaded for export

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Universal milling machine EMCO FB-4 with 3-axis digital display Heidenhain, in very good condition. Technical data: >> Year of manufacture: 1997 >> Fixed angular table (clamping area 800 x 400 mm) >> Speed: 18 speed stages from 63 - 3150 rpm >> Mechanical feed: 18 stages Feed rate X and Y: 16-800 mm/min Bodpfx Afozq Efqsmolp Feed rate Z: 8-400 mm/min Rapid traverse X and Y: 2400 mm/min Rapid traverse Z: 1200 mm/min >> Travels X/Y/Z: 450/300/350 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill, extendable 100 mm >> Tool holder: SK40 >> Weight approx. 1500 kg >> Machine dimensions L x W x H: 1485 x 1475 x 1680 mm >> Motor brake >> Connection value: 4 kVA Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Chip tray, machine feet >> Operating manual, spare parts list About the machine: Offered is a universal milling machine EMCO FB-4 in very good condition. The EMCO runs very smoothly, even at high speeds. The vertical milling head is fastened with four screws and can be easily swung to the side using the articulated arm visible on the left side of the machine. Feed and rapid traverse in each axis. The Emco comes from a training workshop and has been used very little. Take advantage of the opportunity to inspect and test the machine on-site while it is powered up.

Condition: new, power: 184 kW (250.17 HP), first registration: 12/2023, fuel type: diesel, tire size: 14.00R20, axle configuration: 4x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel, total length: 8,500 mm, total width: 2,500 mm, total height: 3,350 mm, Year of construction: 2023, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - Sun visor = Notes = Model year: 2024 = Company Information = Van Vliet Automotive Trading - Your Truck Partner A wide selection of new trucks, trailers, 4x4 vehicles, and machinery. Ready for immediate use! Our in-house (design) workshops, modification center, and paint shop guarantee quick and project-specific processing of your order, anywhere in the world. ISO and AEO certified. Logistics processing and customs/export facilities. Worldwide spare parts service. International team of mechanics and trainers operating worldwide to provide technical support and training. Contact our experienced, multilingual team of customer service representatives now for professional, project-specific, and competitive advice. = Further Information = General Information Model year: 2024 Technical Information Number of cylinders: 6 Engine displacement: 6,871 cc Transmission Gearbox: TipMatic 12.12 OD, automatic Axle Configuration Tire size: 14.00R20 Brakes: Drum brakes Suspension: Leaf spring suspension Bodpfx Afjzqq Siomelp Weights Unladen weight: 6,528 kg Payload: 11,472 kg GVW: 18,000 kg = Company Information = WE PROVIDE, YOU ACCELERATE – Without boundaries. Van Vliet is the official MAN Truck & Bus SE importer for several African countries. Supported by comprehensive after-sales services, such as supplying parts and providing (local) training.

Condition: used, mileage: 155,000 km, power: 235 kW (319.51 HP), first registration: 01/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 7,350 mm, loading space width: 2,480 mm, loading space height: 2,080 mm, Equipment: ABS, air conditioning, navigation system, parking heater, tail-lift, We are very pleased that our offer has aroused your interest, and we assure you that you can purchase a good and affordable vehicle with a verifiable service history from us! NEXT GENERATION / NEW MODEL / TOP !!!!! STEERING AXLE SAFEServer body with 4-row rear cargo securing system NEW TARPAULIN WITH DIGITAL PRINTING POSSIBLE (at an extra charge) AIR CONDITIONING NAVIGATION TAIL LIFT 2,000 KG 2 X TOW HITCH Transmission * Opticruise automatic transmission, 2 pedals, 8 gears Assistance Systems * Electronic Braking System EBS * Adaptive Cruise Control ACC * Automatic Headlight Control * Rear View Camera * Hill Start Assist Lights and Visibility * H7 headlights * Headlight range adjustment * Fog lights * Tinted glass * LED daytime running lights Audio & Communication * Navigation system * Radio * Bluetooth hands-free system Exterior * Air suspension * Axle configuration: 6x2?4 * Rear-mounted aluminum loading platform: BÄR BC2000 S4-C4 * Steerable lift axle * Fifth wheel coupling * Leveling system * Sunroof * Roof spoiler Bledpfxozqxulo Afmep * Electrically adjustable and heated exterior mirrors * Differential lock * Wind deflectors * Axle load indicator * Connection plug 1x15-pin * Speed limiter Safety * Electronic Stability Program ESP * Anti-Slip Regulation ASR * Anti-lock Braking System ABS * Outside temperature display * Electrically adjustable curb mirror * Wide-angle mirror * Immobilizer * Telematics system Interior * Digital tachograph * On-board computer * Sun visor * Cooler box Comfort * Automatic climate control * Auxiliary heater * Driver's seat with air suspension * Seat heating * Adjustable steering column * Electric windows * Central locking Other Equipment * SCR K+G tec sliding tarpaulin panel body L x W x H Dimensions approx. 7,350 x 2,480 x 2,080 mm Cargo Area * Length 7,350 mm, Width 2,480 mm, Height 2,080 mm * Volume 37 m³ Tire Sizes * 1st axle 355/50 R22.5 * 2nd axle: 2nd axle 295/60 R22.5, dual tires * 3rd axle 295/60 R22.5 Other Dimensions and Weights * Payload: 15,305 kg * Permissible total weight: 26,000 kg * Fuel tank: 300l * AdBlue tank: 47l * Wheelbase: 4,750 mm GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING Upon request, we will be happy to provide you with a LEASE-PURCHASE or FINANCING OFFER. SERVICE TÜV/HU / UVV tail lift / LGS inspection / Tachograph test / Installation of OBU device and service by our BRANDED WORKSHOP on site TOLL / ROAD CHARGES Toll can be booked on site. TRAVEL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale in accordance with our general terms and conditions. The information on the Internet is a non-binding description. It does not constitute a guaranteed characteristic. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr. Equipment: Tail lift * Air suspension * Navigation system * Auxiliary heater Speed regulation: Cruise control Air conditioning: Air conditioning Hydraulic system: None Safety: ABS * EBS

Condition: used, mileage: 99,000 km, power: 175 kW (237.93 HP), first registration: 07/2023, overall weight: 11,990 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space length: 7,260 mm, loading space width: 2,450 mm, loading space height: 2,450 mm, Equipment: ABS, tail-lift, We are very pleased that our offer has aroused your interest and would like to assure you that you can purchase a good and affordable vehicle with a traceable service history from us! Highlights: * Differential lock, rear axle * Lane keeping assist * Active Brake Assist Engine: * Engine OM936, R6, 7.7 l, 175 kW (238 hp), 1000 Nm * High Performance Engine Brake Drive: * Wheel formula 4x2 Axles / Suspension / Steering: * Front axle, 5.3 t * Differential lock, rear axle Bsdozx I T Tjpfx Afmelp Chassis: * Wheelbase 4760 mm * ADR type class AT * Trailer hitch * Trailer hitch Cab exterior: * S-cab * S-cab * Locking system with central locking Body: * Cargo area (L x W x H): 7260x2450x2450 mm Air conditioning: * Air conditioning system Seats: * Driver's comfort suspension seat Electrical / Electronics: * Lane keeping assist * Active Brake Assist * Airbag, driver * Cruise control Other equipment: * Body by Junge, tail lift Dhollandia, 1500 kg, 1800 slats, sliding tarpaulin on the left, trailer hitch, drawbar diameter 40 GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING Upon request, we will be happy to provide you with a LEASING, HIRE PURCHASE or FINANCING OFFER. SERVICE TÜV / MOT / UVV tail lift inspection / LGS inspection / Tachograph inspection / Installation of OBU device and service by our AUTHORIZED WORKSHOP. TOLL / ROAD CHARGES Toll can be booked on site. TRAVEL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale in accordance with our general terms and conditions. The information on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: excellent (used), functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, equipped with a 3-axis digital display from Heidenhain ND 780, from a training workshop!! Technical data: >> Machine No. 7702, year of manufacture approx. 1990 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet fitting Blsdpey T Hqcsfx Afmep >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Quick-change tool holder, internal and external collets (see picture) >> 1 three-jaw chuck, 3 sets of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Machine feet About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: used, functionality: fully functional, The ALZMETALL AX 2/S is the more compact sister machine to the ALZSTAR series. It is a professional, extremely precise bench or pillar drill (depending on the base), primarily used in precision engineering, training workshops, laboratories, and demanding workshops. While the ALZSTAR 30/S is designed for "rough" work with a drilling diameter of up to 30 mm, the AX 2/S focuses on compactness and maneuverability for smaller drilling diameters, without compromising the typical Alzmetall stability. Technical data at a glance Blodpfx Aozdy Rzofmsp Feature | Value / Specification ----- | ----- Drilling capacity (in steel St 60) | 23 mm Thread cutting (optional) | max. M 14 (steel) / M 16 (cast iron) Spindle mount | MK 2 (short spindle) Spindle stroke (Z-axis) | 100 mm Overhang | 250 mm Column diameter | 90 mm Machine table (support) | 370 x 300 mm Feed | Manual Motor power | 0.6 / 0.95 kW Spindle speed (stepless) | Variant 1: 125 – 2,400 rpm | Variant 2: 225 – 4,300 rpm Machine weight | approx. 180 kg (net machine weight) Key features & equipment details Mechanically stepless drive: As with the larger sister model, the speed is adjusted steplessly and conveniently during operation via a mechanical control wheel (variator). Digital display: The spindle speed is displayed digitally on a clearly visible display on the head of the machine as standard. Compact size: With a net weight of approximately 180 kg, it is significantly lighter than the ALZSTAR 30/S (approx. 260 kg) and can still be transported or moved relatively easily if required. Safety features: A lockable main switch with motor protection, a locking emergency stop button, and the electrically protected spindle guard are also standard features. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.