Used Tos W 100 A for sale (89,877)

Condition: excellent (used), Year of construction: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior models; however, it is equipped with a larger motor and hydraulic pump, and a more advanced electrical system. General Features: - Robust construction Dksdpfx Aaowyc H Ts Hst - Very user-friendly and economical to operate - Easy maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Circuit diagram - CE compliance - Operating manual Technical Data: - Motor power: 7.5 kW, 400 V, 50 Hz connection - Number of press cycles per minute: 14 - Throughput: 60 – 100 kg/h (material-dependent) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Hydraulic tank capacity: approx. 180 liters - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Including approx. 2 m briquette discharge pipe Note on used machines: - Specifications are subject to change and prior sale. - All prices are ex works – free loading at location. - The machine has been cleaned and tested for functionality. - All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. - Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Year of construction: 2001, condition: used, OSCAM HSEL 100/3-way cutting bench Dodpjyartusfx Aa Hokt Cutting capacity: 40 mm Cutting capacity: 40 mm

Condition: like new (used), Year of construction: 2020, load capacity: 1,000 kg, lifting height: 1,880 mm, construction height: 1,560 mm, operating hours: 3,102 h, fuel type: electric, mast type: duplex, Manufacturer & model: TOYOTA OSE 100 Mast: 2W1880 ID: 25110.8747 Category: Used Mast type: 2W Lowered height: 1560 mm Lifting height: 1880 mm Capacity: 1000 kg Platform height: 1200 mm Picking height: 2800 mm Initial lift: Yes Cabin width: 800 mm Dkodpfx Aajzv Rz Uj Hjt Year: 2020 Operating hours: 3102 hours Battery capacity: 24V / 620Ah Options: with SAFETY gates !!

Condition: excellent (used), A robust German machine from PROTOS Schuhmaschinen – W. Ullrich K.G., Frankfurt am Main, designed for creating durable markings, numbering, and printing using hot stamping. This device is used in the production of footwear, leather goods, belts, wallets, cases, and other products requiring aesthetic marking. The machine is equipped with an adjustable marking mechanism with interchangeable digits and a system for feeding hot stamping foil. Its stable construction ensures precise and repeatable operation. Technical specifications: Manufacturer: PROTOS Schuhmaschinen W. Ullrich K.G., Frankfurt am Main Model: TF1501 Country of origin: Germany Adjustable marking unit Numbering/digits for marking Foil feed for hot stamping Temperature control Foot control (pedal) Work table included Electrical power supply Applications: Natural and synthetic leather, Leather goods, Footwear, Textiles, Cardboard and paper, Plastics suitable for hot stamping. Condition: Used machine, in good visual condition. Condition matches the photos. Dkjdpfx Aajzgui Dj Hjt

Condition: used, Year of construction: 1985, machine/vehicle number: 0440298, Wheel diameter: 500 Minimum wheel diameter: 50 Maximum external ring diameter of the machined wheel with internal gearing: 800 Maximum distance from ram axis to table axis: 355 Minimum distance from ram axis to table axis: 0 Maximum number of teeth on machined wheel: 300 Minimum number of teeth on machined wheel: 12 Dsdpfxjywh N Is Aa Hjkt Smallest module: 1.5 Largest module: 8 Table diameter: 500 Table bore: 120 Bore depth: 650 Year of manufacture: 1985 Weight: 5,200 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Dsdpfx Aajzvnfwe Hekt Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Condition: used, Year of construction: 2015, functionality: fully functional, operating hours: 170 h, pressing force: 320 t, working width: 5,100 mm, degree of automation: automatic, Equipment: emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, TOSKAR press brake Pressure 320 tons Bending length 5100mm Bending length between columns 4100mm Speed of approach movement 100 mm/s Speed of bending movement 9 mm/s Dkodpfx Aaswq Aa Ie Het Speed of return movement 100 mm/s Opening 300 mm Distance to columns 500mm Year 2015 Only 170 working hours 5 Axes Y1, Y2, X, R, deflection arrow CNC controller with NexT touch screen

Condition: used, Year of construction: 1979, total height: 1,700 mm, total length: 4,900 mm, total width: 1,900 mm, Empty weight: 8.000 kg Metal turning lathe Model: Conventional Manufacturer: TOS Type: SU-100 Centerdistance: 2000mm Turningdiameter above bed: 1050mm Spindle-hole: 105mm Motorpower: 22kW Spindle-speed: 2,24-450rpm Max. workpiece weight: 5000kg Including 4-jaw-chuck + lynette Djdpfx Aaownhf Rs Hskt Machine-dimensions: 4900x1900x1700mm Machine-weight: 8000kg Machine has been tested, in very good condition Video is available - Year: 1979 - Documentation available: No - CE certificate present: No - Serial number: 0429412 - Drive system: Conventional - Power [kW]: 22.0 - Swing over bed [mm]: 1050 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Options: Four-jaw chuck, Fixed steady - Transport dimensions: 4900mm x 1900mm x 1700mm (l x w x h) - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1969, BHU 40/1500 TOS Hostivar Cylindrical Grinder Grinding diameter 400 mm Grinding length 1500 mm Maximum workpiece weight 300 kg Grinding wheel: 600 x 150 mm Longitudinal travel of the table (x-axis): 1 – 1790 mm Grinding head swivels +/- 45° Dedpfxszg H E Ro Aa Hjkt Table swivels +/- 5° Spindle taper: Morse 5 Maximum rotational speed of the grinding wheel spindle: 1240 rpm / 2100 rpm Total power consumption: 22 kVA Machine weight: approx. 7000 kg Cooling system: none Accessories: none

Condition: good (used), functionality: fully functional, Mitutoyo length measuring system, model KA 12 (for longitudinal and transverse movement) Retrofitting with a CNC control system for the draw-in device, including air conditioning unit, Center distance: 630 mm, the machine has no tailstock and was specifically used for chucking operations, Max. grinding diameter: 280 mm, Max. grinding wheel size: 400 x 40 x 127 mm (not included in the scope of supply), Grinding spindle speed: 2040 rpm, 6 speed stages of the tool spindle: 22.4 to 280 rpm, Drive motor: 4 kW, Accuracy / smallest division value: 0.001 mm, Dkedpfozv Uhrox Aa Het Taper in tailstock and tool spindle: Morse 4 Largest table longitudinal travel: 760 mm, Weight between centers: 120 kg, Total power consumption: approx. 9.3 kW, Machine weight: approx. 2600 kg, Machine dimensions: L 3075 x W 1650 x H 1500 mm Year of manufacture: corresponds to the serial number: 1989 - 1991 Swiveling headstock (± 90°) and grinding head (± 45°), Hydraulic table movement and automatic feed, Cooling system, Machine lighting, Operating manual in German and electrical diagrams.

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, infeed width: 720 mm, Placing a bid obligates the buyer to collect the equipment on time, no later than 31/12/2025! The offer includes: - MBO R 700 Feeder (Serial no.: 0722420, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1543, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1544, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1545, Year: 2002) - MBO SBAP-46-ME Vertical Delivery (Serial no.: 90020602, Year: 2002) - H+H 148/2 Transfer Unit (Serial no.: 820-411, Year: 2002) - Bickel SGU Die Cutter (Serial no.: 033, Year: 1997) - MBO 3-Up Delivery for SAP 66-ME (Serial no.: 910913362) - Polar L-1000-W-3 Pallet Lift Table (Serial no.: 6072421) TECHNICAL DETAILS Dkodpfx Aasxyhnye Hst Fold Plates Fold plates 1st folding unit: 6 (individually driven, removable sheet transfer) Fold plates 2nd folding unit: 6 Fold plates 3rd folding unit: 2 Infeed Width Infeed width 1st folding unit: 720 mm Infeed width 2nd folding unit: 720 mm Infeed width 3rd folding unit: 520 mm This machine comes with a gate fold plate (usable in units 1 and 2), as well as 2 separate sheet diverters and 1 auxiliary frame for setup. Units 2 and 3 are electrically height adjustable! Note: The MBO delivery unit is defective.

Condition: used, Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw Djdem Sk H Ijpfx Aa Hjkt -Manufacturer: Rapid, table saw saw unit: 45° pivotable -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 175 mm, (max. Ø 300 mm) -Cutting height 37 mm with saw blade Ø 175 mm (max. ca. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 940/860/H1390 mm -Weight: 162 kg

Condition: not inspected (used), YOM 1998, Hidenhein 430 .12000/1000/1450mm. 36000 kg Dodpfx Aezfw A Dsa Hjkt

Condition: new, functionality: fully functional, 8 units available. Various models in stock; for more information, please contact us. Export is possible. Dkodpfx Aeyypv Ioa Hst

Condition: used, Year of construction: 2004, operating hours: 3,142 h, total width: 2,400 mm, total height: 2,100 mm, Colour: Grey Empty weight: 5.000 kg Dimensions (LxBxH): 550 x 240 x 210 cm Price: On request - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 102848 - Operating hours: 3142 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 3: Djdpfxjzvcqze Aa Hjkt - - Spindle type: Left - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 22 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Top - - Motor power [kW]: 30 - - Tool present: Yes - └ Spindle 7: - - Spindle type: Bottom - - Motor power [kW]: 15 - Min. planing width [mm]: 20 - Max. planing width [mm]: 300 - Min. planing height [mm]: 3 - Max. planing height [mm]: 160 - Feed table length [mm]: 1000 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive - Lubrication system: Automatic - Diameter extraction nozzle [mm]: 160 - Options: Powered rollers in table, Powerlock - Feed speed: Manual - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 33 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 278 - Fuse [A]: 400 - Power [kW]: 128.0 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), functionality: fully functional, For sale: this lathe, currently connected and available for testing. Accessories for the machine included. A video of the machine can be sent via WhatsApp upon request. Swing over bed: 1050 mm Dkodpfxsv Nw A No Aa Hot Distance between centers: 6000 mm Swing over carriage: 840 mm

Condition: excellent (used), Year of construction: 2001, x travel 1600 mm y travel 1000 mm z travel 780 mm - number of processing axes (excl parallel axes) 5 - X-axis travel 1600 mm - Y-axis travel 1000 mm - Z-axis travel 780 mm - table surface (left-right) 1000 mm - table surface (front-back) 1000 mm - workpiece load (max) 6000 kg Dedpfoy Ez Elox Aa Hskt - - positioning/indexing 0.001 ° - - positioning/indexing 2.5 ° - - positioning/indexing 2.5 ° - spindle revolutions (max) 2500 /min - drive power 22 kW - number of positions 60 - number of store positions 2 - pallet length 1000 mm - pallet width 1000 mm - number of pallets 2 - space requirements -left/right- 6400 mm - space requirements -front/back- 6900 mm - total height 4000 mm - total weight approx. 26000 kg control HEIDENHAIN TNC 426 The machine is in very good condition and available immediately.

Condition: used, TOS lathe Type SUA 150 CNC Capacity: 6000 m Year: 1998 CNC Siemens 840 Accessories: Supplied with eye shields. Dsdpfxjzxpzxo Aa Hskt

Condition: reconditioned (used), Gomad wood lathe, type DNXA-40x100 A, after overhaul. For sale: Gomad DNXA wood lathe, Polish-made. Overhauled, with new electrical components and a one-year warranty. Turning diameter: approximately 42 cm. Bed length: 132 cm. Tailstock with rotating and eccentric locking. Two sizes of tool rests. Can be disassembled for transport; delivery is possible within approximately 100 km upon agreement. Three turning speeds adjustable by belt. M24 thread on the spindle, making it easy to attach chucks and faceplates. Dkodpszhn Shsfx Aa Hjt Excellent for learning woodturning. Suitable for both small and large bowls.

Condition: new, functionality: fully functional, overall weight: 260 kg, Completely new, in original packaging. Various models available, please contact us for more information. Dkedpsyymfajfx Aa Het

Year of construction: 2000, condition: ready for operation (used), A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible. Dedpfxsvdu N Ao Aa Hokt

Condition: good (used), Diosna W 120 A dough mixer - used - year of manufacture not specified - 120 kg dough capacity Dodpfx Aaoxpg D Ej Hekt - 2 removable bowls - manual control - stainless steel mixing tools - bowl cover - machine from running production - mixer requires inspection - collection from warehouse/shipping option available - price on request

Condition: used, Year of construction: 2009, greates pass round over bed 1050 mm dist. between centers 6000 mm centre height 520 mm turning length 4810 mm workpiece weight max. (main spindle) 6000 kg Maximum workpiece weight with steady rests 8000 kg Dkedpfx Asygxy Uea Hot max. torque on the spindle 12500 Nm number of spindle speeds 2,8-560 1/min feed per revolution 0,08-56 mm chuck diameter 630 mm Maximum travel distance of the longitudinal slide 4810 mm Maximum travel distance of the cross slide (suppor 530 mm Maximum travel distance of the tool slide (support 340 mm Tailstock quill diameter 150 mm total power requirement 31 kVA weight of the machine ca. 10500 kg dimensions of the machine ca. 7860 x 1970 x 1480 mm Equipment/accessories: -2 x face plates -3 jaw chucks -2 x steady rests -Multifix holder -Turning tools -Various tips -Technical documentation

Condition: refurbished (used), Year of construction: 2002, Horizon VAC 100 A+C brochure line Staple-fold station SPF 20A, trimmer FC 20A Djdpfx Aajyl Aiwe Hskt Jogger PJ 77R

Condition: new, Year of construction: 2023, functionality: fully functional, 4x new high-efficiency inline pumps with EC motor Wilo Stratos GIGA 100/1-17/3.7. Dkjdsx Hg Uzjpfx Aa Hst All brand new, in original packaging and stored on pallets.