Used Tos Sui 40 for sale (22,827)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted Rsdpsw U Dt Nefx Aa Uop General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 1996, turning diameter 380 mm turning length 750 mm control HEIDENHAIN ManualPlus total power requirement 9 kW weight of the machine ca. 2 t Redpfjx U Encjx Aa Ujp dimensions of the machine ca. 2,4 x 1,7 x 1,7 m

Condition: used, Year of construction: 1982, Technical details: Rjdevb A Uuepfx Aa Usp table length: 2200 mm table width: 2500 mm table load: 16 t total power requirement: 6,5 kW feed speeds: 1,25 - 160 mm/min rapid traverse speed: 2000 mm/min longitudinal adjustment: 1500 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 4,1 x 2,65 x 0,95 m

Condition: excellent (used), CATALOG NUMBER 6913 TECHNICAL DATA - Track width: 360mm - Shaft width: 350mm Rodpsx Rq Efofx Aa Uop - Max. saw blade diameter: 350mm - Saw blade bore diameter: 80mm - Max. cutting height: 120mm From above: - Pawls - Toothed feed roller - Pawls - Smooth slip roller - Roller with saw blades - Pressure slip roller From below: - 2 slip rollers before the worktable - Guide - Pawls - Track - Central automatic lubrication for track - Electric lifting of the saw blade shaft - Electric lifting of the main body - Infinitely variable feed speed adjustment - Feed motor approx. 2.5kW - Main motor 30kW - Overall dimensions (L/W/H): 2500x2300x1900mm - Weight approx. 4000kg ADVANTAGES – Czech production – 2 slip rollers in the worktable – Used multi-rip saw – Very good condition Net price: 34,900 PLN Net price: 8,300 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Collet chuck Collet chuck SK 40 Rjdpfelwqc Esx Aa Ujp DIN 69871 Tightening thread M 16 Collet type OZ-467 E length 140 mm 10 pieces with set 150 Euro Single delivery 15 Euro

Condition: excellent (used), CATALOGUE NUMBER: 7480 Technical data: - Track width: 360mm - Shaft width: 350mm - Max. disc diameter: 350mm - Disc bore diameter: 80mm - Max. cutting height: 120mm - Table size: 2040x1220mm Top section: - Pawls - Driven, toothed shaft - Pawls - Shaft with saw blades - Slip/pressure shaft Bottom section: - Rollers in front of the table, 2 pcs - Guide rail - Pawls - Track - Central track lubrication - Electric lifting of the saw shaft - Electric body lifting - Stepless feed speed control - Extraction port diameter: 140mm, 160mm - Main motor: 30kW Rsdpoyg Ip Ejfx Aa Uop - Overall dimensions (L/W/H): 2600x2300x1850mm - Weight approx. 4000kg ADVANTAGES – Czech manufacture – Used multirip saw – Very good condition Net price: 33,900 PLN Net price: 8,070 EUR (depending on the 4.2 exchange rate) (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 1991, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Rodpsymg Iaofx Aa Ujp

Condition: good (used), Copy head, copying head, copying device, copying lathe -Heavy copy head for: lathe -without: hydraulic unit -Guide rails: 2 -and: accessories -Dimensions: 1100/170/H370 mm -Weight: 143 kg Rodpedzymasfx Aa Uep

Condition: ready for operation (used), functionality: fully functional, power: 0.004 kW (0.01 HP), cutting height (max.): 250 mm, cutting width (max.): 450 mm, saw blade diameter: 400 mm, overall weight: 7,500 kg, Two-shaft multi-saw 2x110 kW TOS SVITAVY PWR 422 - Czech production - twin-shaft - DTR documentation TECHNICAL DATA: - max cutting height: 250mm - track width: 450mm - shaft width: 450mm - disc bore diameter: 80mm - shaft diameter: 60mm - min disc diameter: 300mm - max disc diameter: 400mm - max width of input material: 860mm - min length of processed material: 1500mm * From above: - Rejectors: + - Drawing shaft, metal pneumatically pressed: + - rejects: + - drawing shaft, metal, pneumatically pressed: + - pressure: + Rodpfori Nvvox Aa Uop - saw shaft: + - pressure: + - 2 pulling shafts, metal pneumatically pressed: + * Bottom: - metal roller, sliding: + - guide: + - rejects: + - track: + - saw shaft: + - track: + - infinitely adjustable feed speed on inverter: 4-40m/min - main motors: 2x110kW - feed motor: about 3kW - electric lifting of the body up/down: 0,55kW - electric adjustment of saw shafts: 2×0.18kW - central lubrication - diameter of the extraction stub: 2x300mm - dimensions L/W/H: 3400x2650x2200mm - weight approx: 7500kg

Condition: excellent (used), 4 knives Table length: 300 cm Rodpfx Aajyk D H Io Uep Table width: 63 cm Motor power: 5 kW

Condition: used, mileage: 82,000 km, power: 295 kW (401.09 HP), first registration: 09/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, compressor, navigation system, parking heater, MB ANTOS 2640 S AKX Horsetruck 6 horses Pop-Out 6 horses, side and rear ramp, pop-out, cellar under apartment, storage compartments around the truck, 550 liters fresh water, 300 liters waste water, 5 berths, living room, large bed above bathroom, groom's bed, rear entrance door, Video surveillance and temperature monitoring for horse compartment, LG stationary air conditioning, stationary heating, Tv/Sat, fine wood, bathroom, shower, WC, air conditioning, kitchen, seating area, microwave, refrigerator, external tack room, cable winch, cruise control, alloy wheels, navigation system, air suspension, steerable rear axle, trailer coupling, and much more. Errors/entry errors & prior sale reserved. * NET SALE POSSIBLE. * Top leasing offers Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all makes in the field of horse transporters and trailers. Rjdpoufu Uiofx Aa Ujp Please make an appointment in advance. under Richard Theurer Andreas Theurer

Condition: used, mileage: 273,025 km, power: 290 kW (394.29 HP), first registration: 10/2016, fuel type: diesel, empty load weight: 13,865 kg, maximum load weight: 12,135 kg, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: silver, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 2, total length: 9,820 mm, loading space length: 6,433 mm, loading space width: 2,506 mm, loading space height: 950 mm, Year of construction: 2016, construction height: 3,500 mm, Equipment: ABS, air conditioning, crane, The Mercedes-Benz Antos 2540 L is a used truck with an open flatbed, equipped with a Palfinger PK15001L crane and a steering axle. The vehicle was first registered in October 2016 and has a mileage of 273,025 km. Powered by a 10,677 cc diesel engine with an output of 290 kW (394 hp), it meets the Euro 6 emissions class. The vehicle has an automatic transmission and offers space for two people. The truck has a silver metallic paint finish and is equipped with aluminum rims. The dimensions are 9,820 mm long, 2,550 mm wide and 3,500 mm high. The permissible total weight is 26,000 kg. With an environmentally friendly green environmental sticker and guaranteed low emissions, this truck is well suited for inner-city use. Large-scale stickering Rsdpfxsm Uxafe Aa Ujp Sale only to businesses (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Rodpfjh U Rznjx Aa Ujp Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Redpfxjyi Da Sj Aa Uep Weight 3500kg 380V power supply Includes additional components, fillers, and letterpress locks.

Condition: used, mileage: 255,000 km, power: 290 kW (394.29 HP), first registration: 08/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, loading space volume: 85 m³, loading space length: 8,600 mm, loading space width: 2,430 mm, loading space height: 2,200 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, * Spier sliding curtain body * DEKRA certified according to VDI 2700 ff and DIN EN 12642 Code XL * 4 rows of load securing rails * 2,000 kg Bär tail lift * Large fold-out step on the side * Liftable self-steering trailing axle * Reversing camera * Full air suspension * Differential lock Redpfx Asxmn Hvea Uep * Spoiler * Sun visor * Air conditioning * Adaptive cruise control * Lane keeping assist * Roll stability control * Brake assist * Heated seats * 3-stage retarder (constant throttle) * Automatic transmission * Euro 6 * Cargo area dimensions: 8,600 x 2,480 x 2,200 mm (21 pallets) together with tandem sliding curtain trailer * Manufacturer: Spier * Gross weight: 18,000 kg * Payload: 12,250 kg * First registration: 08/2019 * Cargo area dimensions: 6,950 x 2,480 x 2,200 mm (17 pallets) * 2,000 kg Bär tail lift * SAF axles * Disc brakes ---- Special equipment: Front axle load 8.0 t, driver airbag, exhaust outlet downwards right, 220 Ah battery, standard and DuoMatic brake coupling, compressed air connection in cab, additional air reservoir, raised air unit, air horn, driver assistance system: roll stability control, vehicle without trailer coupling, 12.7 cm info display with video function, 3-piece mudguard, steered trailing axle, liftable, acoustic reversing warning (external warning signal), tail lift switch, reinforced rear crossmember, circuit breaker, cab seats: passenger seat with armrest, cab seats: driver comfort suspension seat, cab seats: folding driver's seat backrest, external sun visor, 12V socket in passenger footwell, additional 24V socket in passenger footwell, preparation for reversing camera, seatbelt warning system Additional features: Emission standard EURO 6, axle configuration: 6x2, trailer brake 2-line, connections on the left, 24V / 15-pin trailer socket, Antos, audio system: radio with USB connection, exterior mirrors electrically adjustable and heated, differential lock rear axle, steel air reservoir, driver assistance system: lane keeping assist, cab width: 2.30 m, cab tilt mechanism hydraulic, cab: M ClassicSpace, cab: steel suspension, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric window lifters, tinted windscreen, 100 A alternator, 12-speed transmission - type: G 211-12, urea tank (AdBlue): 60 l, manual sliding roof (steel), rear axle crown wheel 440, chassis/body: chassis, comfort locking system, fuel tank: 290 l aluminium, unregulated steering pump, front air intake, 2-stage air compressor, engine 10.7 l - 290 kW R6 diesel (OM 470), engine brake, engine compartment encapsulation, single tires on trailing axle, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axles, seat cover / upholstery: fabric, cab seats: passenger functional seat, front spray protection, front axle stabilizer, additional stabilizer, rear axle / trailing axle, 24V cab socket, tachograph / EC control device, aerodynamically shaped underbody panelling, front underrun protection, toll system preparation, cranked front axle, regulated water pump, permissible total weight 25.00 t

Condition: used, mileage: 255,000 km, power: 290 kW (394.29 HP), first registration: 08/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, loading space volume: 85 m³, loading space length: 8,600 mm, loading space width: 2,430 mm, loading space height: 2,200 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, * Spier sliding curtain body * DEKRA certified according to VDI 2700 ff and DIN EN 12642 Code XL * 4 rows of load securing rails * 2,000 kg Bär tail lift * Large folding side step * Liftable trailing steering axle * Reversing camera * Full air suspension * Differential lock * Spoiler * Sun visor * Air conditioning * Adaptive cruise control * Lane keeping assistant * Roll stability control assistant * Brake assistant * Seat heating * 3-stage retarder (constant throttle) * Automatic transmission * Euro 6 * Cargo space dimensions: 8,600 x 2,480 x 2,200 mm (21 pallets) In combination with tandem sliding curtain trailer: * Manufacturer: Spier Rodjxmn E Eopfx Aa Uep * Gross weight: 18,000 kg * Payload: 12,250 kg * First registration: 08/2019 * Cargo space dimensions: 6,950 x 2,480 x 2,200 mm (17 pallets) * 2,000 kg Bär tail lift * SAF axles * Disc brakes ---- Special equipment: Front axle load 8.0 t, driver's airbag, exhaust downward right, 220 Ah battery, standard and DuoMatic brake connection, compressed air connection in cab, additional compressed air tank, high mounted air unit, air horn, driver assistance system: roll stability control assistant, vehicle without trailer coupling, info display 12.7 cm with video function, 3-part mudguards, steered trailing axle, liftable, acoustic reversing warning (external warning signal), tail lift switch, reinforced rear cross member, circuit breaker, cab seats: passenger armrest, cab seats: comfort driver's suspension seat, cab seats: folding driver's backrest, external sun visor, 12V socket in passenger footwell, additional 24V socket in passenger footwell, pre-wiring for reversing camera, seat belt warning system Additional equipment: EURO 6 emissions standard, axle configuration: 6x2, 2-line trailer brake, connections left, 24V / 15-pin trailer socket, Antos, audio system: radio with USB port, electrically adjustable and heated exterior mirrors, rear axle differential lock, steel compressed air tank, driver assistance system: lane keeping assistant, cab width: 2.30 m, cab: hydraulic tilting, cab: M ClassicSpace, cab: steel suspension, standard, cab floor with 320 mm engine tunnel, suspension: air / air (full air suspension), electric windows, tinted windscreen, 100 A alternator, 12-speed transmission - type: G 211-12, urea tank (AdBlue): 60 L, manual roof hatch (steel), rear axle crown wheel 440, body/chassis: chassis, central locking system, fuel tank: 290 L aluminium, unregulated power steering pump, front air intake, two-stage air compressor, engine 10.7 L - 290 kW R6 diesel (OM 470), engine brake, engine compartment encapsulation, single-tired trailing axle, ramp mirror, spare wheel, residual heat utilisation, disc brakes front and rear axle, seat covering / upholstery: fabric, cab seats: function passenger seat, front splash guard, front axle stabiliser, additional stabiliser, rear/trailing axle, 24V cab socket, tachograph / EC control device, aerodynamic underbody panelling, front underrun protection, toll pre-installation, cranked front axle, regulated water pump, permissible total weight 25.00 t

Condition: used, Surface grinder, TOS BPH 20 NA, Used machine Manufacturer: TOS Type: BPH 20 NA Overall dimensions: Width: 1820 mm Depth: 1540 mm Rsdjx Hgvlopfx Aa Usp Height: 1800 mm Electrical data: 380V; 50Hz Table size: 835 × 250 mm Magnetic table size: 650 × 250 mm Maximum grinding width: 250 mm Maximum workpiece height: 350 mm Max. table load: 180 kg Grinding wheel: 260 × 35 mm Machine weight: approx. 1600 kg Accessories: Coolant system Magnet chuck mounted on the table (650 × 250 mm)

Condition: used, Surface grinder, TOS Hostivař BPH 300, Used machine Manufacturer: TOS Hostivař Type: BPH 300 Overall dimensions: Width: 3030 mm Depth: 1670 mm Rjdpfexxk Dujx Aa Ujp Height: 2160 mm Electrical data: 3×380V; 50Hz Table size: 1000 × 300 mm Maximum grinding width: 300 mm Maximum workpiece height: 350 mm Max. table load: 2745 N – approx. 275 kg Grinding wheel (diameter × width × bore): 250 × 25 × 76 mm Minimum grinding wheel diameter: 120 mm Longitudinal table stroke: 1060 mm Cross table stroke: 350 mm Vertical travel of the grinding head: 420 mm Machine weight: approx. 3000 kg Accessories: Coolant system Table-mounted magnetic chuck (1000 × 300 mm)

Condition: good (used), functionality: fully functional, Machine weight: 1725 kg Total machine power: 3 kW Table clamping surface: 800x400 mm Longitudinal table movement - x-axis: 600 mm Transverse table movement - z-axis: 400 mm Vertical table movement - y-axis: 400 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm Working longitudinal feed - x-axis: 8-400 mm/min Working transverse feed - z-axis: 8-400 mm/min Working vertical feed - y-axis: 8-400 mm/min Rapid feed x/z/y: 2000/2000/1000 mm/min Max. workpiece weight: 400 kg Rodpovzkzcjfx Aa Uop

Condition: excellent (used), Weiss Model: WK11-1000/40 For sale is a professional Weiss Umwelttechnik WT-WK 1000/40 climate test chamber with fully automatic cold-regenerating adsorption dryer. The installed fixtures in the test chamber can be removed if required. Currently, due to these fixtures, the control cabinet is limited to a temperature range of −40°C to +60°C. Once the fixtures are removed, the manufacturer can expand the temperature range back to the standard values of −40°C to +180°C, as the fixtures are not suitable for these higher temperatures. This equipment is ideal for precise temperature and humidity testing on components, assemblies, and devices. It is perfectly suited for applications in industry, development, quality assurance, and research. Weiss Climate Test Chamber – Water Cooled Data for Temperature Tests: - Temperature range: −40°C to +60°C Rjdpjx Hxkzjfx Aa Uop - Temporal temperature fluctuation (at center of usable space): ± 0.1 to ± 0.5 K - Spatial temperature deviation: ± 0.5 to ± 2.0 K - Temperature change rate: - Heating: 4 K/min - Cooling: 3 K/min Data for Climate Tests: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98 % r. H. - Temporal temperature fluctuation (at center): ± 0.1 to ± 0.3 K - Spatial temperature deviation: ± 0.5 to ± 1 K - Temporal humidity fluctuation (at center): ± 1 to ± 3 % r. H. - Thermal compensation: - In the range of +25°C to +95°C - At a relative humidity of up to 90%, 500 W Humidification System Data: - Reservoir volume: 20 l - Water quality: demineralized - pH value: 6 to 7 - Conductivity: 5 to 20 μS/cm³ - Water consumption at constant +40°C, 92% r. H.: 21/24 h - Temperature gradient: - (according to IEC 60068-3-5): 1 to 2 K Test Chamber Dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm External Dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test Chamber Volume: approx. 990 liters Nominal Voltage: 3/N / PE AC 400 V +10% 50 Hz Nominal Power: 11.5 kW, Nominal Current: 22.0 A Refrigerant: R 404A Weight: 840 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Technical data subject to modifications and errors!) Further questions can be answered via telephone.

Condition: good (used), Year of construction: 2000, feed length X-axis: 4,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,400 mm, CNC Heidenhain 426 M Automatic head Tool changer Rjdpfx Ajyiu E Soa Usp ISO 50 4,000 RPM Power 22 kW

Condition: used, mileage: 193,250 km, power: 290 kW (394.29 HP), first registration: 12/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, ANTOS 1840 L telescopic skip loader with ZAA-AHK * System: HYVA TS2014 TAXL UVV NEW 04.2026 * RADIO REMOTE CONTROL * Vehicle no. For customer inquiries: 4275 * Active Brake Assist * Rear axle differential lock * Air conditioning * Engine version Euro VI, D * Lane Keeping Assist * Environmental sticker (green) * Standard trailer hitch, D40, Rockinger * High Performance Engine Brake * Rear axle air suspension * Full service history * Stability Control Assist (ESP) * Rear trailer brake connection, Duo-Matic+Standard * Dual-line trailer brake, left brake connections * Antos * Electronic braking system with ABS and ASR * Comfort driver's suspension seat * G 211-12/14.93-1.0 transmission * Mercedes PowerShift 3 * Particulate filter * Locking system with central locking * Transparent exterior sun visor * Cruise control * Two-seater * High storage compartment on engine tunnel * 75 l AdBlue tank, left * 24 V trailer socket 15-pin connector * Work lights, top cab rear wall * Roof hatch/roof ventilation flap * Cab rear wall with window * Heating, electronic compressed air supply unit * ClassicSpace M cab, 2.30 m, tunnel 320 mm * Engine OM470, R6, 10.7 l, 290 kW (394 hp), 1900 Nm * Wheelbase 3700 mm * Tubeless tires, 315/70 R 22.5 rear axle * Tubeless tires, 315/70 R 22.5 front axle/front axle/rear axle * Stabilizer, front axle * Toll collection preparation * Additional stabilizer, rear/trailing axle * Attention assist * Weight variant 18.0 t (8.0/13.0) * Steering oil cooling * Minimum equipment, skip loader * Digital tachograph, 2nd Generation, ADR Rsdpewm Tadefx Aa Uop * Tank 290 l, left, 650 x 700 x 750 mm, aluminum No liability for printing or typographical errors Sale to businesses only Subject to errors and prior sale* Subject to changes, prior sale, and errors. This description serves to identify the vehicle and does not constitute a warranty under sales law. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING, FINANCING, or HIRE PURCHASE offer. Warranty insurance available upon request from the insurer. * TÜV / UVV LBW / tachometer inspection and OBU device installation by our local partners. * Customs license plate valid for 30 days. All customs documents for export are available, but must be requested separately. * Toll Collect can be booked in-house. * Free transfer from Stuttgart Airport or Metzingen (Württemberg) train station. * ARRIVAL STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * --- Visit us on our website at * Over 200 vehicles always in stock.

Condition: used, mileage: 172,000 km, power: 290 kW (394.29 HP), first registration: 06/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 6,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, tail-lift, We are very pleased that we have aroused your interest with our offer and can already assure you that you can buy a good and reasonably priced vehicle with a traceable service history from us! MB ANTOS 2540 with certified Spier sliding tarpaulin body Rear load securing LBW 2,000 KG AHK LENKACHSE 315 / 60 R 22.5 tires PAYLOAD: 14,450 KG GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING On request, we will be happy to provide you with a LEASING-MIET PURCHASE or FINANCING OFFER. SERVICE TÜV-HU / UVV LBW / LGS-PRÜFUNG / tacho check / installation of OBU device and service by our MARKENWERKSTATT on site Rodpfx Aaexumzbo Usp TOLL / ROAD CHARGES Tolls can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt airport 150 KM away Frankfurt-Hahn airport 40 KM away Luxembourg airport 75 KM away Sale according to our AGBs. The details on the Internet are non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: good (used), Tailstock counter bearing for dividing head, dividing apparatus -Peak height: 95-115 mm -Recording: MK2 -Dimensions: 180/100/H110 mm -Weight: 4 kg Rjdpjb A Ntyofx Aa Ujp

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, We are selling this machine. ISO 50 tool holder, through-spindle cooling X axis 9,000 mm Y axis 4,000 mm S 30 rotary table with 30,000 kg load capacity, dimensions 2,500 x 3,500 mm Spindle speed 10–3,000 rpm Redpfx Aasx Auzlo Usp Plates measuring 4,000 x 2,000 mm (1 pc) and 2,000 x 2,000 mm (1 pc) Heidenhain iTNC530 Two angle irons, tools, accessories. This is a complete workstation. The machine will be released from production at the end of January 2026.