Used Toolroom Milling Machine for sale (65,343)

Condition: good (used), Aciera f3 milling machine. Spindle speed is controlled by a frequency converter. Automatic longitudinal feed (X-axis). Automatic feed for the Z-axis. Spindle taper: W20 Power supply: 400V Axis travel X-axis: 300 mm Bledpfx Aj Ahd T Tefmop Y-axis: 300 mm Z-axis: 135 mm Digital readouts on all axes.

Condition: used, Year of construction: 1980, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Universal bed-type milling machine Machine weight: approx. 11 tons Travel distances X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 630 mm Spindle and tool holder Spindle taper: SK 50 Speed range: 20–2,000 rpm Horizontal milling spindle: SK 50 Vertical milling spindle: SK 50 Feed rate and rapid traverse Feed rate: 10–6,000 mm/min Rapid traverse: 6 m/min Work table Table load: max. 5,000 kg Control system Control system: Philips NC 6664 Axes: 4 Program memory: available Rotary table Rotary table: NC-controlled Diameter: 630 mm Electrical data Total power requirement: 18 kW Control cabinet Control cabinet dimensions: 1,800 × 530 × 2,000 mm Dimensions Space requirement: approx. 4.6 × 2.9 × 2.62 m Blsdpfxs Aa Ahre Afmop EQUIPMENT NC-controlled rotary table Hydraulic tool clamping Coolant system Chip conveyor Horizontal milling spindle Vertical milling spindle Separate control cabinet Safety emergency stop Important note: The machine vice, if visible in the pictures, is not included in the scope of sale and delivery!

Condition: good (used), functionality: fully functional, Universal milling machine Mikron WF 2!!! Technical data: >> Fixed angular table >> Speed: 12 speeds from 50 - 2240 rpm Blodps Ahq Hzjfx Afmep >> Feed rate in 3 axes from 8 – 400 mm/min >> Rapid traverse in 3 axes 1400 mm/min >> Travels X/Y/Z: 420/250/345 mm >> Vertical and horizontal quill – SK40 >> Collet system S20x2 >> Weight approx. 850 kg >> Central lubrication About the machine: A Mikron WF 2 universal milling machine in working condition is offered for sale. What makes this machine special are its travel distances, which are very large in relation to the machine's size: Z = 345 mm, X = 420 mm, and Y = 250 mm. Take advantage of the opportunity to inspect and test this machine on site while it is powered up.

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: 4193, total height: 1,789 mm, total width: 1,300 mm, total length: 1,200 mm, overall weight: 1,500 kg, Weight 1,5 t serial number 4193 ja vice ja x-travel 500 mm length 1200 mm width 1300 mm height 1789 mm Bodpezxt Tlofx Afmjlp

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 from a training workshop Bsdps Ahq A Esfx Afmjlp Technical data: >> Machine no. 51434/08 >> Rotary, tilting, and swiveling table >> Speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Collet system S20x2 >> Weight approx. 700 kg >> Coolant system About the machine: Offered is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash, and all spindles move easily. An oil change has been performed. The FP1 comes from a large company and was only used for training purposes. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up. The machine is available immediately. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: used, travel distance X-axis: 9,000 mm, table length: 2,800 mm, table width: 8,000 mm, table load: 64,000 kg, TECHNICAL DETAILS Longitudinal travel: 9,000 mm Transverse travel: 2,950 mm Vertical travel: 1,250 + 2,200 mm Rapid traverse rates for longitudinal/transverse/vertical axes: 3 / 3 / 2 m/min Table size: 2,800 × 8,000 mm Table division: 5,000 + 3,000 mm Permissible table load: max. 64,000 kg Spindle speed: 20–600 rpm Spindle motor power: 100 kW Spindle torque: 13,000 Nm Spindle mounting: ISO 60 Distance between columns: 3,200 mm Distance from spindle nose to table: 2,806 mm MACHINE DETAILS Overall dimensions: 21,000 × 7,800 × 6,650 mm EQUIPMENT Bsde Agftijpfx Afmolp 90° head Compact 90° head Vertical extension Swiveling head 3-stage gearbox Note: The machine is in good condition. However, an overhaul may be necessary.

Condition: used, Year of construction: 1980, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Travel ranges X-axis: 500 mm Y-axis: 500 mm Z-axis: 400 mm Spindle and tool holder Speed range: 30–2,240 rpm Tool holder: SK 40 Feed rate and rapid traverse Feed rate range: 1–750 mm/min Rapid traverse: 1,500 mm/min Work table Table clamping surface: 400 × 800 mm Control system Control system: Heidenhain TNC 131 Performance data Total power consumption: 7.8 kW Bodpfs Aa Aybsx Afmjlp Machine weight: approx. 1.8 t Dimensions Space requirement: approx. 2.1 × 1.6 × 2.2 m Axes and clamping Feed drives: separate drives for each feed spindle Axis clamping: automatic hydraulic Release: working axis automatically released Manual operation: all axes can be released EQUIPMENT Swiveling device for vertical head Coolant system Separate drives for each feed spindle Automatic hydraulic clamping of all axes Heidenhain TNC 131 control system

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 from a training center Technical data: >> Machine no. 6884 >> Rotary, tilting, and swiveling table >> Speed: 40 - 2000 RPM >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travel distances X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Clamping system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> Coolant system About the machine: A Deckel FP2 universal milling machine in good condition is offered. All spindles can be moved easily. All bellows are new. An oil change has been carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on site while it is powered. The machine is immediately available. For an additional charge, the machine can be equipped with a new K&C digital display. Blodj Agn Rxepfx Afmep

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Manufacturer: Knuth Model: VH F1 Machine type: Milling machine Machining process: Shank milling MACHINE DETAILS Length: 1,500 mm Width: 1,000 mm Height: 2,000 mm Weight: 700 kg Bjdpfx Afj Ad Iuxemelp

Condition: good (used), Aciera f3 milling machine. Automatic longitudinal feed (x-axis). Spindle mount: W20 Power supply: 400V Axis travel: X-axis: 300 mm Y-axis: 300 mm Z-axis: 135 mm Bodo Ahd Ufepfx Afmjlp

Condition: used, Year of construction: 1979, Table dimensions 1300-800 mm Weight 4,7 to. Year 1979 Blsdpfxszhcizs Afmsp x-travel 1000 mm angular milling head ja documentation ja serial number 733 weight of the machine ca. 4,7 t

Condition: used, Year of manufacture: 1992 Empty weight: 3.800 kg Dimensions (LxBxH): 210 x 260 x 260 cm - Year: 1992 - Serial number: 610555 - Drive system: CNC - Control system brand: Fanuc - Power [kW]: 7.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 610 - Y-axis travel [mm]: 460 Bjdpfo Ahxpijx Afmjlp - Z-axis travel [mm]: 510 - Table length [mm]: 950 - Table width [mm]: 560 - Tool holder: BT40 - Min. spindle speed [rpm]: 60 - Max. spindle speed [rpm]: 6000 - Transport dimensions: 2100mm x 2600mm x 2600mm (l x w x h) - Transport weight [kg]: 3800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP3 from a vocational school! Technical data: >> Machine No. 1847 >> Swivel-tilting table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel distances X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Central lubrication Bjdps Agn Inofx Afmolp About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be moved easily. Most of the bellows are new. An oil change has been carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on-site while it is powered up. For an additional cost, the machine can be equipped with a new digital display from K&C.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, We are selling a used 3-axis machining center, WAGNER WMC 1100, in very good condition. The machine was manufactured in Taiwan. It was only used for the production of individual parts and therefore has very few operating and power-on hours. Technical data: Table: 1300 x 600 mm Blodpfxs Agwvus Afmop Table load: 500 kg X-axis: 1100 mm Y-axis: 650 mm Z-axis: 600 mm Control: Siemens 828D Tool positions: 24 Spindle head: BT-40 Spindle speed: 8000 rpm Accessories: 1 x Chip conveyor 1 x Band filter 1 x Measuring probe 1 x Broken tool detection 1 x Coolant system 1 x Handwheel

Condition: used, Year of construction: 1985, machine/vehicle number: 2204 - 0469, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: CNC-controlled tool milling machine Condition: good Travel distances X-axis travel: 580 mm Y-axis travel: 400 mm Z-axis travel: 450 (390*) mm Work table Table size: 460 × 800 mm Spindle Spindle speed range: 40–4,000 rpm Spindle taper: SK 40 Spindle drive: 4.0 kW Vertical head: rotatable ±90° Quill stroke: 80 mm Horizontal spindle: available Feed rate and rapid traverse Feed rate range: 2–3,600 mm/min Feed rate: 4.0 m/min Feed axes: 3 axes Control system Control system: Contour 2 Dimensions Space requirement: approx. 3.0 × 2.10 × 2.10 m EQUIPMENT Blsdj Aa Atzepfx Afmsp Hydraulic tool clamping Mobile control panel Electronic handwheel Automatic central lubrication Coolant system Safety emergency stop Chip tray Separate control cabinet

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 with special paint finish and 3-axis digital readout K&C NEW, in excellent condition. Technical data: >> Machine no. 2200-1958 >> Long sliding head >> 3-axis digital readout K&C NEW >> Swivel table with tilting and rotating function >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 500/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill, extendable - SK-40 >> Collet system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout K&C, newly installed with manufacturer's warranty and operating manual. Display unit: Setting reference points, setting zero points, entering coordinates, switching between mm/inch, absolute or incremental coordinates, circular functions, hole patterns, radius milling functions, etc. >> Coolant system About the machine: Bledpfx Ao Agwvmjfmop Offered is a Deckel FP2 universal milling machine in very good condition. The Deckel has excellent guides and is geometrically perfect. The long sliding head runs smoothly even at maximum speeds. The Deckel has very little backlash and all spindles can be moved easily. The machine has been completely disassembled and repainted. An oil change has been performed. Mechanically and electrically tested. The digital readout from K&C makes working easier and even more precise. Furthermore, you have a 1-year warranty on the new digital readout. Take the opportunity to inspect and test the Deckel on site under power.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Bledpfx Afoyahv Ssmop Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: ready for operation (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 2,066 rpm, spindle speed (min.): 30 rpm, Huron MU6 Universal Milling Machine Model: MU6 Bledjz S Nkrepfx Afmsp Table Size: 2000 x 460mm ‘X’ Longitudinal Travel: 1500mm ‘Y’ Cross Travel: 700mm ‘Z’ Vertical Travel: 550mm Spindle Speeds: 30 – 2066 RPM Spindle Taper: 50 INT Machine with: Digital Readout

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Bledpfx Afo Ad Iwgjmjp Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Imatec Type: BM153-G-M3 Year of manufacture: 1974 Machine type: Tool milling machine SPINDLE Speed range: 10–510 rpm WORK TABLE Table dimensions: 1,100 × 260 mm Table slots: 3 Clamps: 2 CONTROL Digital display: 3-axis digital display, Fagor MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,500 mm Width: 1,500 mm Height: 1,800 mm Weight: 800 kg EQUIPMENT 3-axis digital display, Fagor Work table with 3 slots 2 clamps

Condition: used, Year of construction: 2003, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: Universal Milling Machine Model Series: MF1 Machine Weight: approx. 0.95 t Bljdpfx Ao Aa Axkjfmop Travel Ranges X-axis travel: 760 mm Y-axis travel: 290 mm Z-axis travel: 370 mm Quill stroke: 127 mm Work Table Table size: 750 × 230 mm Spindle and Milling Head Speed range: 60–4,200 rpm Spindle taper: SK 30 Overhang: 171–476 mm Quill feed: 0.04 / 0.08 / 0.13 mm/rev Quill feed stages: 3 Milling head: swiveling and tilting Spindle speed control: stepless Feed Feed range X-axis: 19–890 mm/min Feed X-axis: steplessly adjustable Rapid traverse X-axis: available Performance Data Total power consumption: 2.4 kVA Dimensions Space requirement: approx. 2.05 × 1.63 × 2.07 m EQUIPMENT Swiveling and tilting milling head with quill feed Automatic quill feed Pneumatic tool clamping Digital position display Steplessly adjustable spindle speed Feed in X-axis with rapid traverse Extensive standard accessories

Year of construction: 2010, condition: used, CNC control system FIDIA with handwheel; travel ranges: X-axis approx. 11,500 mm, Y-axis approx. 1,550 mm, Z-axis approx. 2,250 mm; clamping table, length x width x height, 2 pieces, each approx. 2,000 x 2,000 mm; table load max. 1,000 kg; milling spindle, spindle power S1 / S6 approx. 7.4 kW / 12 kW, spindle speed 16,000 rpm, tool holder HSK 50A, B- and C-axis +/- 210° / +/- 104°, feed rate X-, Y-, Z-axis up to 16 m/min, axis acceleration m/s², machine footprint approx. 14,000 x 2,600 x 3,650 mm, with self-built table, total weight approx. 13,500 kg; NOTE: Fully functional condition, machine has already been disassembled and stored. The machine is already located at a different location in Kartonstraße 2, D-88255 Baienfurt. Free loading FCA D-88255 Baienfurt. Bedpfx As Af Nl Ujfmelp

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 from a training workshop Technical data: >> Machine no. 57752/08 >> Swiveling rotary table >> Speed: 40 - 2000 rpm >> Feed for 2 axes >> Drive power: 1 / 1.5 kW >> Travel ranges X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill – SK40 >> Spindle brake >> Collet system S20x2 >> Weight approx. 700 kg >> Coolant system Bedpfxe Ahq Eko Afmolp About the machine: Offered is a Deckel FP1 universal milling machine in very good original condition. The Deckel has very little backlash and all spindles can be moved easily. The machine has a brake motor; the control cabinet was modified by the previous owner. The BGR inspection is no longer valid. An oil change has been performed. The FP1 comes from a large company and was only used for training purposes. Take advantage of the opportunity to inspect and test this machine on site while it is powered on. The machine is available immediately. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: used, Year of construction: 1996, Milling Center KAFO Type/Model: VMC-1400 Control: Fanuc Condition: Used Year of Manufacture: 1996 Technical Data Machine Table Table Size: 1700 x 730 mm Working Area: 1700 x 650 mm T-slots: Width: 18 mm x 5, Spacing: 125 mm Max. Table Load: 2000 kg Travel Ranges / Working Areas Travel Ranges X / Y / Z: 1450 / 750 / 700 mm Distance Spindle Nose - Table: 200 - 900 mm Spindle Overhang: 750 mm Spindle Spindle Taper: BT-50 Spindle Speed: 40 - 4000 rpm Speed Control: Stepless speed control in 2 stages Feeds Rapid Traverse (X and Y axis): 12,000 mm/min Rapid Traverse Z axis: 10,000 mm/min Blodpfx Ao Ahxlisfmop Feed Rate X / Y / Z axis: 1 - 4000 mm/min Automatic Tool Changer Tool Magazine: 30 positions Tool Selection: Automatic direction change in any sequence Max. Tool Diameter: Ø 125 mm Max. Tool Length: 300 mm Max. Tool Weight: 15 kg Motors Feed Motors: 3.3 kW Spindle Motor Power: 15 kW Machine Dimensions Footprint (L x W): approx. 4400 x 3020 mm Weight: approx. 12,000 kg Inquiry Item: Transportation costs will be provided in a separate, customized quote.

Condition: good (used), Deckel FP4 MK Milling Machine Technical Data: Travel distances X/Y/Z: 500 / 400 / 400 mm Spindle taper: ISO 40 Bodpfx Afs Aggg Domolp Spindle speed: 50–2,500 rpm Digital position display: 3-axis Heidenhain TNC 113 Tool clamping: Hydraulic drawbar Drill chuck: 90 mm stroke Universal rotary table: Type 2038 Cooling: Coolant system installed Accessories: Including machine vice Machine weight: Approx. 1,700 kg

Condition: good (used), Deckel FP1 3-Axis Active Milling Machine Technical Data: Manufacturer: Deckel Type: FP1 Machine: 3-Axis Active Milling Machine Travel in X-axis: 300 mm Travel in Y-axis: 160 mm Travel in Z-axis: 340 mm Spindle Speed: 40–2,000 rpm Feed: Automatic feed and rapid traverse on the X, Y, and Z axes Table Size: 600 × 210 mm Digital Position Display: 3-Axis Heidenhain Spindle Taper: SK 40 Equipment: Bjdpfs Agghpex Afmelp Work light Emergency stop switch Coolant system