Used Toolroom Lathe for sale (5,481)

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Technical Data note: no tailstock Working range: Circumferential diameter over bed: 550 mm Circumferential diameter over bed slide: 480 mm Axial run-out (X-axis): 405 mm Traverse path in longitudinal direction (Z-axis): 1,099 mm Max. Max. turning length: 1,000 mm Tool turret: Number of positions: 12 pcs. Holder: VDI 50 DIN 698800 Driven tools: No Headstock: Spindle head size 8 DIN 55026 Bearing diameter front: 150 mm Spindle bore: 103 mm Max. Max. diameter of the chuck: 315 mm Drive poweR 50% ED: 53 kW Max. Torque: 780 Nm Spindle speed range 30 - 3,000 min-1 Feed speeds: Face slide (X-axis): 10,000 mm/min Longitudinal slide (Z-axis): 10,000 mm/min Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 10 m/min Max. Feed force: 15 kN Guodpfxet Rwlps Ah Hji Dimensions and weight: Machine dimensions L x W x H approx.: 5400 x 3200 x 2400 mm Weight of the machine approx.: 11,000 kg

Condition: used, Year of construction: 1997, functionality: fully functional, GILDEMEISTER - CTX 500 Offer Details Stock number: 1039-9180 Type of machine: CNC lathe Manufacturer: GILDEMEISTER Model: CTX 500 Year of manufacture: 1997 Control: Eltropilot Heidenhain Location: D-59302 Oelde Country of origin: Germany Delivery time: immediately Freight basis: ex stock Additional information: Gjdsxtpd Aepfx Ah Hsui CNC Lathe GILDEMEISTER - CTX 500 WE OFFER YOU: - Workshop-inspected machines - Free loading on truck - WITHOUT auction fee - Delivery possible (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Turning length: 1,000 mm Swing diameter max. over bed cover: 600 mm Swing diameter over cross slide: 420 mm Control: Eltropilot Heidenhain Travel - X-axis: 275 mm Travel - Z-axis: 1,065 mm Main spindle: Spindle speed range: 16 - 3,200 rpm Main spindle drive power: 27 kW Max. torque: 800 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 85 mm Chuck diameter: 260 mm Spindle nose: 220H5 Turret: Number of tool stations: 12 positions Shank diameter: 40 mm Turret indexing time: 0.8 sec. Tailstock: Quill diameter: 100 mm Quill stroke: 120 mm Quill fitting: Morse Taper 5 (MT 5) Quill pressure: max. 950 daN Feeds: Rapid traverse X: 10 / Z: 15 m/min Feed force X: 500 / Z: 1,000 daN Total connected load: 52 kVA Machine weight approx.: 7.5 t Space requirements approx.: 5.5 x 2.5 x 2.1 m Accessories Documentation Chip conveyor Coolant system Tailstock Hydraulic unit Three-jaw chuck SMW KNCS-N-260-72 Tool changer 12 positions

Condition: used, functionality: fully functional, GURUTZPE B10000 LATHE Guedpfx Ahexwwi Ie Hoi 10 METERS BETWEEN CENTERS 1900mm SWING OVER GAP 1600mm SWING OVER BED 1200mm SWING OVER CARRIAGE 105mm SPINDLE BORE / BAR CAPACITY 4-JAW CHUCK FIXED AND STEADY RESTS

Condition: new, The Sinus 330/3000 D is a top-tier Conventional Horizontal Lathe within the Engine Lathes category, renowned for its robust design and superior performance. Built on a solid one-piece cast machine bed, this lathe excels in heavy-duty tasks with a maximum turning diameter of 660 mm and a workpiece length capacity of up to 3,000 mm. Precise operation is ensured with hardened guideways and a manual multi-disc clutch for smooth spindle engagement, making it ideal for machining large parts and flanges. The integrated removable bed bridge expands functionality, while rapid traverse on two axes facilitates quick positioning for increased efficiency. Safety is prioritized with features like overload protection and a well-designed splash guard. As with all KNUTH machines, the Sinus 330/3000 D is engineered for reliability and longevity. For further details or to buy now, explore our offerings in Conventional Horizontal Lathes and Engine Lathes. Gjdpfjuyh Nrox Ah Houi

Condition: used, Year of construction: 2012, Max. part diameter 39 mm Max. part length 65 mm max. turning length 58 mm Gujdpsxuv Uqsfx Ah Hji control Siemens x-axis 750 mm z-axis 180/140 mm spindle tunring speed 6.000 U/min drive capacity - spindle motor 13,7 kW rapid traverse (x/z) 60/30 m/min Acceleration (x/z) 7 m/s² Tool compensation axis 3 mm Tool holder for turning tools Capto C 4 weight ca. 7.000 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories: - Step conveyor, Knoll - Chip conveyor, Knoll - Robot, Fanuc - Tilting device, Sachwarz - Hydraulic unit, Bosch Rexroth Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 1999, turning diameter 500 mm turning length 1500 mm control Manual Plus spindle bore diameter 70 mm turning speed range 8 - 2800 U/min transmission ratio 3 swing diameter over face slide 290 mm spindle head DIN 55027 Gr 8 tool holder Typ C quill stroke 180 mm weight of the machine ca. 3,2 t dimensions 3,0 x 1,8 x 1,8 m Description of the machine: This machine is suitable for turning chucked and shaft workpieces. The commercially available steel grades, casting, copper, aluminium, brass, gunmetal and cuttable plastic can be turned on this machine. --> Concept of the N.E.F. plus The machine si supplied as standard with the following described equipment - Cycle control - AC-Main drive - Compund slide rest with AC drive and operating panel - Tailstock traversable using slavingunit, manualy clamped, including following centre point - Coolant unti - Chip protection hoods, manually actuated - Protection hood for chuck - Fast change tool holder Hahn & Kolb Multifix C - Reduction collar for turning spindel accessories according to pictures: - 2 STK steady rests - various clamping jaws - Hahn & Kolb Multifix type C - Various torsion bar holders Technical data: Working area: - Circulation diameter over bed: 500 mm - Circumferential diameter above the radial slide: 285 mm - Chuck Ø: 250(315) mm - Face slide: 260 mm - Distance between centres: 1000/1500 mm Gsdpfxeub Amls Ah Hjui Turning spindle: - Spindle head DIN 55027: Size 8 - Hole diameter of the spindle: 70 mm - Hollow taper of the spindle nose: 80 metric - Spindle diameter in front bearing

Condition: excellent (used), Year of construction: 2020, operating hours: 3,349 h, functionality: fully functional, SMEC Samsung Turning Centre Model SL4500XY Year 2020 Fanuc Series Oi-TF Control 775 mm swing over bed Godpfxoxcny Uj Ah Heui 630 swing over cross slide Max machining dia – 680 mm Max length to be confirmed – 2000 mm Bar working dia – 117.5 mm X travel 350 mm Chuck size 534 mm SMW Autoblok Type SLU-X-4-ZS Steady Live Tooling – 6 Driven tools Swarf Conveyor The machine is in excellent condition

Condition: used, Year of construction: 2001, functionality: fully functional, GILDEMEISTER - NEF 320 Listing Details Stock number: 1039-9316 Machine Type: Cycle-Controlled Lathe Manufacturer: GILDEMEISTER Model: NEF 320 Year of Manufacture: 2001 CNC Control: Manual Plus 3110 Heidenhain Location: D-59302 Oelde, Germany Country of Origin: Germany Availability: Immediate Freight Terms: Ex works location Additional Information: Cycle-controlled lathe GILDEMEISTER - NEF 320 - Operating hours (power on): 21,529h WE OFFER YOU: - Workshop-inspected machines - Free loading onto truck - NO auction fees - Delivery possible (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Turning diameter: max. 320 mm Turning length: max. 740 mm CNC Control: Manual Plus 3110 Heidenhain Swing over bed: 320 mm Swing over cross slide: 150 mm Turning length: 740 mm Cross slide travel: 185 mm Distance between centers: 750 mm Main Spindle: Spindle speed range: 10 - 4,000 rpm Main spindle drive power: 11 kW Max. torque: 410 Nm Spindle nose: No. 6 DIN 55027 Gujdextpcfspfx Ah Hoi Front bearing spindle diameter: 85 mm Spindle bore: 50.8 mm Max. chuck diameter: 200 mm Chuck diameter: 200 mm Tool holder: Type: MultiFix - B Tailstock: Quill diameter: 70 mm Quill taper: MK 5 Quill stroke: 120 mm Feeds: Rapid traverse x/z: 8 / 10 m/min Feed force x/z: 3 / 6 kN Total power requirement: 14 kVA Machine weight approx.: 2.0 t Space requirement approx.: 3.5 x 2.5 x 2.0 m Accessories Documentation Three-jaw chuck 200 mm Tailstock Tool holder MultiFix B

Condition: used, Year of construction: 2003, weight of the machine ca. 6,6 t control monforts control 2 centre distance 3010 mm centre height 310 mm tail stock ja Godpsw Saibjfx Ah Houi cooling ja dimensions of the machine ca. 5000-1600 mmxmmxmm spindle bore 70 mm

Condition: new, The Basic 170 Super PRO is a high-performance Conventional Horizontal Lathe from the renowned brand KNUTH, designed specifically for metalworking applications. Over the years, the Basic series has established itself as a reliable choice for mechanics, featuring a modern ergonomic design and extensive standard equipment to meet the demands of contemporary users in workshops and training centers. This lathe boasts a turning diameter over bed of 354 mm and a center width of 1,000 mm, providing robust construction from high-quality cast iron for maximum stability. With hardened and ground gears for quiet operation, adjustable spindle bearings for precision, and an effective coolant system, the Basic 170 Super PRO ensures long tool life and minimal maintenance. It also features ample storage for accessories and an easy-to-use position indicator for auxiliary functions. For universal applications in repairs, training, and production, you can request a quote for this exceptional Conventional Horizontal Lathe today. Gedouyhvxspfx Ah Heui

Condition: used, turning diameter 250 mm turning length 610 mm Guedpfx Aexuv Ukjh Hoi control ARIX CNC spindle bore 54 mm tail stock MK4 turning speeds 20 - 6000 U/min weight of the machine ca. 3,5 t

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and pull spindle lathe with 2 axis digital readout Heidenhain from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 2-axis digital readout from Heidenhain >> 1 new three-jaw chuck 125 mm with 2 sets of jaws >> collet chuck device new with collets new from 3 mm to 25 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Back plate Gjdpfx Aheu Afqle Hjui To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: good (used), Year of construction: 1990, 2. Turret disks with tool holders. For CNC lathe OKUMA&HOWA 2SP Gsdsxr Diwjpfx Ah Hjui

Condition: new, The V-Turn 410/1000, part of the Conventional Horizontal Lathes category and under the Engine Lathes group, is a precision lathe that excels in both precision and production applications. This bestselling machine features a robust inverter and a high-performance 5.5 kW motor that enables spindle speeds of up to 3,000 RPM, ensuring efficient processing of workpieces with small diameters. The constant cutting speed function automatically adapts to the turning diameter during face turning, delivering superior quality akin to that of CNC machines. Built on a heavy ribbed machine bed and a solid one-piece cast-iron frame, the V-Turn provides exceptional stability for heavier machining tasks. With its wide, hardened guideways and large spindle bearings, it guarantees excellent concentricity and longevity. The extensive standard equipment includes a 3-axis position indicator, coolant system, and a quick change tool holder, among others. Experience the precision of KNUTH's V-Turn 410/1000—request a quote today and enhance your machining capabilities in the Conventional Horizontal Lathe category and Engine Lathes group. Gujdsp Aua Uopfx Ah Hei

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: Guedpfx Aju Aftgoh Hei >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders Gusdpfsvtp Edsx Ah Hji >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus GS guide and feed spindle lathe in very good original condition! Technical specifications: >> Year of manufacture approx. 1992 Machine no. 4549 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm >> Short taper spindle head DIN 4 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> New collet chuck system, new collets from 3 to 25 mm >> 1 piece Three-jaw chuck with 2 sets of jaws >> Mulifix size A with 2 tool holders About the machine: Guodpfxowkh Abe Ah Hoi Offered is a Weiler Primus GS guide and feed spindle lathe in very good original condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in excellent condition. The Weiler runs very quietly even at high speeds. The Primus was used in a training facility. This newer generation of Weiler lathes is very user-friendly and can produce surfaces that look as if they were ground. Take advantage of the opportunity to view this machine on-site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus GS lead and feed screw lathe 3 axis digital readout Easson- ES8 from training workshop Super condition !!! Technical data: >> Year of construction approx. 1990 Machine no. 3768 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev Godpfx Ahevkfhpe Houi >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 3-axis digital display from Easson ES8 >> collet chuck device from 1 to 20 mm collets 1 mm rising with holder and draw tube >> 1 three-jaw chuck with 2 sets of jaws >> 1 four-jaw chuck with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Bed stop >> Turning device To the machine : We are offering a Weiler Primus lathe built around 1990 in excellent condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The bed guides are in very good condition. The Weiler runs smoothly even at high speeds. The machine comes from a training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws Gedpfx Ajvivmyoh Houi >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Weiler precision lathe model Condor B, lead and feed screw lathe with brand new K&C 3-axis digital readout, CE compliant! Technical data: >> Machine No. 2442, year of manufacture 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, selectable >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Equipment and features: >> New K&C 3-axis digital readout, 12-month manufacturer's warranty, supplied with operating manual Gsdpfx Asxcuazjh Hsui Features: mm/inch switching, selectable ABS/INC coordinates, value halving function, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 x brand new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 x 200 mm 4-jaw chuck with 1 set of jaws >> New collet chuck system and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, changewheel box with safety interlock, spindle brake About the machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes work easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Weiler Primus VC Precision Centre Lathe 3-axis Digital Readout K&C NEW with VC Drive, Stepless Speed Adjustment, and CE Compliance, Very Good Condition Guedpfjw Idlljx Ah Hei Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis Digital Readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, new, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 toolholders >> Electric chip guard >> Machine feet >> Splash guard About the Machine: This offer is for a Weiler Primus VC lead and feed screw lathe, built in 2003 and in very good original condition. A very nice lathe with VC drive and stepless spindle speed control. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. Take the opportunity to inspect this machine under power on site and be convinced of its condition.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Precision Lathe Model Condor 81 Lead and Feed Spindle Lathe with 3-Axis Digital Display from K&C NEW Technical Data: >> Year of manufacture 1987 Machine No. 87 835 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral-Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis digital display from K&C new, 12 months manufacturer's warranty with operating manual Functions: Switch mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming 200 pcs, taper calculation, radius/diameter, quick zeroing, reversing of count direction >> 1 piece 3-jaw chuck 160 mm NEW, 2 sets of jaws >> 1 piece 4-jaw chuck 160 mm, 1 set of jaws >> Collet equipment and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Machine feet Godpfx Ahowrmuxo Heui About the Machine: A used Weiler Condor 81 in very good condition is offered. The machine is, of course, fully functional and has been completely disassembled and repainted. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine on site under power.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Center Lathe Model Condor B Guide & Feed Shaft Lathe with 3-Axis Digital Readout by K&C NEW from Training Workshop!! Technical Data: >> Machine No. 91-1814, Year of manufacture: 1991 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2,800 rpm Gusdpfew Nw Dqox Ah Hsi >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread leads: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Scope of Delivery and Features: >> NEW 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating manual Functions: mm/inch switch, ABS/INC coordinate selection, display value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> 1 pc. NEW 160 mm 3-jaw chuck, 2 sets of jaws >> 1 pc. 160 mm 4-jaw chuck, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle safety guard >> Rear splash guard >> Fixed steady rest >> Machine feet Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake About the machine: We are offering a Weiler Condor in very good condition. The machine is, of course, fully operational. It is a very robust and powerful lathe. The brand new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Weiler Center Lathe Model Condor 81 Lead and Feed Lathe with 3-Axis Digital Readout from K&C NEW Technical Specifications: >> Year of Manufacture 1983 Machine No. 83-067 >> Center height 165 mm >> Center width 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feed rates from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be switched on >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating instructions Functions: mm/inch switching, ABS/INC coordinate selection, halving of the display value, reference mark, 200 tool programming, cone calculation, radius/diameter, quick zeroing, counting direction switching >> 1 new three-jaw chuck, 160 mm, 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm, 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle protection >> Rear panel >> Coolant system >> Machine feet Guodpfx Ajwb Supoh Hji About the machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was also performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and try out this machine live on-site.

Condition: excellent (used), functionality: fully functional, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting capability: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck set, collets from 3 to 30 mm, 40 collets, some duplicate sizes >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Live centre Gedpfx Ahjxu Hlas Houi For Safety: >> Cover for lead and feed screw >> 2 emergency stop buttons >> Spindle brake About the machine: A used Weiler Condor 81 lathe from 1988 is being offered in very good condition. The machine is of course fully functional. The lead and feed screws are covered for safety. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A full oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power at our facility.