Used Tilting Table for sale (19,549)

Condition: new, Year of construction: 2026, Panel Saw ALTENDORF F 35 Type 1 - 1000 Top for Solid Wood - New machine - immediately available from stock Bitburg - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large safety hood Double roller carriage, 3,200 mm Scoring unit-ready Rip fence, cutting width 1,000 mm Angle/miter fence 3,450 mm, without length compensation Dkedexyl Epjpfx Aa Hjt Table extension/widening: Powder-coated surface Saw blade tilting range: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade diameter: 450 mm Display size: 15 inch Working table height: 910 mm Extraction port diameter: 80 + 120 mm Options included: M45102 Rip fence 1000 mm Digit_X Location: ex-stock 54634 Bitburg - immediately available -

Condition: used, Altendorf C45 Panel Saw with Sliding Table Scoring unit 0.75 kW, electrically adjustable up/down Sliding table 320 cm Max cutting width at rip fence on the right side: 130 cm Tilting 0-45°, manually adjustable Saw blade height adjustable manually Dkjdoyt Ibbjpfx Aa Hst Motor power 4 kW Max saw blade diameter 315 mm Duplex angle fence included The machine has been inspected, still holds accuracy and angles, and is fully functional

Condition: good (used), Year of construction: 2002, functionality: fully functional, stack height: 165 mm, overall weight: 530 kg, cutting width (max.): 1,135 mm, compressed air connection: 8 bar, insertion depth: 950 mm, Equipment: documentation/manual, Can be coated with an air spreader roller, one or two times Chrome-plated air table Right/left vibration option Tilt adjustment Dkjdjzzd Ixopfx Aa Het Adjustable vibration speed Table size: 950 mm x 1,135 mm Layer height, min.: 30 mm Layer height, max.: 165 mm Table height: 860 - 950 mm

Condition: new, table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm Dsdpfexaatnjx Aa Hskt total power requirement 230 Volt weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: excellent (used), Year of construction: 2008, 300 kg load capacity welding rotary table, with hollow shaft diameter 125 mm with chuck 320 mm or 400 mm very robust Dodpfx Aaolamtbo Hokt speed continuously adjustable from 0.15 to 5.0 RPM current transfer 350 A rotary table diameter 400 mm tilting up to 135° height in horizontal position 835 mm, when tilted up to the center approximately 735 mm length 850 mm x width 580 mm

Condition: excellent (used), functionality: fully functional, rotary table diameter: 310 mm, The TR310 is a dual-axis tilting rotary table that provides maximum rigidity and accurate performance for 3+2 and full 5-axis machining of medium to large parts. Scale feedback on the A (tilting) axis improves positioning accuracy and repeatability. Djdeztakajpfx Aa Hjkt Add 4- and 5-axis capabilities to your machine. Easy plug-and-play connection to Haas machines. Industry-leading performance and capabilities. Heavy-duty design.

Condition: excellent (used), SCM SI 400 EP panel saw Dksdsy Rzphopfx Aa Hjt Sliding table 320 cm, Motorized tilting 0–45 degrees Motorized up/down blade adjustment, Right-side rip fence motorized adjustable up to 1500 mm, Manual scoring unit adjustment, 9 kW motor, 3 blade speeds, Max blade diameter 400 mm, Sliding table fence adjustable for angle Used machine, in very good condition.

Condition: used, Graule AGT combined pull-through and table circular saw. The pull-through saw can be tilted and swivelled. The machine can also be used solely as a pull-through saw by removing the table. Cutting height 85/40 mm Technical data: - Cutting length: max. 380 mm Dksdjzryu Nopfx Aa Hot

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MJ45-KD3 Sliding Table Saw The CORMAK MJ45-KD3 sliding table saw is a high-class panel saw designed for precise cutting of MDF, HDF, chipboard, laminated boards, ABS, PVC, and solid wood. Thanks to its integrated scoring unit and large sliding table, the machine delivers perfect cuts without chipping or tearing. It is a reliable solution for furniture manufacturers, woodworking workshops, and companies processing wood materials that require high productivity, precision, and repeatability in daily operation. Main Advantages of the Machine High-performance sliding table saw with scoring unit – ideal for cutting furniture boards and composite materials. 5.5 kW Kacperek main motor – provides reliability, durability, and sufficient power for operation with Ø350 mm saw blades. Precision Ø125 mm scoring unit – rotating at 7500 rpm, it eliminates chipping on the underside of panels. Strong welded closed-profile steel frame – ensures maximum rigidity and structural stability. Cutting angle range from 0° to 45° – enabled by a patented tilting system of the cutting unit. Large and stable 3200 × 420 mm sliding table – facilitates precise cutting of large-format panels. Automatic blade lifting system – improves convenience and safety during setup. Construction and Technology The CORMAK MJ45-KD3 panel saw has been designed for intensive industrial operation. The machine is built on a durable steel frame that effectively reduces vibration and improves machining accuracy. The cutting unit allows installation of saw blades ranging from Ø250 to Ø350 mm and works together with a precise Ø125 mm scoring blade, making the machine highly versatile for various woodworking applications. High-quality components ensure long-term reliability, easy maintenance, and stable performance even during demanding production processes. Precision and Working Efficiency The CORMAK MJ45-KD3 sliding table saw with scoring unit provides excellent repeatability and clean cutting edges thanks to precise table guidance and high spindle speeds. The main blade can operate at speeds of up to 4800 rpm, while the scoring blade reaches 7500 rpm, ensuring smooth processing of laminated panels and delicate surfaces. With a maximum cutting height of 100 mm, the machine is capable of handling thicker materials, significantly expanding its range of applications. Standard Equipment Main motor 5.5 kW and scoring motor 1.1 kW Dksdpfsvuf Iqjx Aa Hot Cutting unit with tilt and height adjustment Sliding table 3200 × 420 mm Crosscut fence and rip fence with precision adjustment Tilting upper blade guard Integrated dust extraction system with Ø100/80 mm outlets Blade angle and height indicators Complete technical documentation Technical Specifications Parameter Specification Main saw blade diameter / bore 350 / 30 mm Saw blade tilt range 0°–45° Main blade speed 2800 / 4000 / 4800 rpm Scoring blade diameter / bore 125 / 20 mm Scoring blade speed 7500 rpm Work table dimensions 945 × 720 mm Sliding table dimensions 3200 × 420 mm Maximum cutting height 100 mm Cutting width with rip fence 1250 mm Crosscut capacity with crosscut fence 3200 mm Dust extraction outlet under table Ø100 mm Dust extraction outlet on blade guard Ø80 mm Minimum air velocity 20 m/s Minimum air flow 565 m³/h Main motor power S1/S6 5.5 kW / 9 HP Scoring motor power S1/S6 1.1 kW / 1.8 HP Weight 850 kg

Condition: used, Altendorf Wa80 panel saw, 320cm sliding table on round rods, Main motor 5.5KW, 3 rotation speeds, Scoring unit 0.75KW, Dsdpfx Aasyhdb Ho Hekt 0-45° tilt, electrically adjustable, Saw blade up/down electrically adjustable, Max blade diameter 400mm, Max cutting width at right rip fence 130cm, Machine tested, fully functional.

Condition: good (used), Year of construction: 2005, Offer 26140 Technical data: - Maximum load capacity with horizontal table: 350 kg - Maximum load capacity in all tilted positions: 300 kg - Diameter of the rotary table: 400 mm - Through-hole / hollow shaft: 125 mm - Rotary table can be manually swiveled left and right: 0 - 90° - Rotational speed, continuously adjustable: approx. 0.15 - 5.0 rpm Dkjdpfx Aaezfhvzo Hot - Right-hand and left-hand rotation - Electric foot switch - Welding current transmission: approx. 350 A - Power supply: 400 V - Table height in horizontal position: approx. 900 mm - Space required: approx. W 1150 x H 900 x D 800 mm - Weight: approx. 290 kg - Chuck size: 300 mm

Condition: like new (used), For sale is a used Hammer C3-31 combination machine with a cutting length of up to 865 mm. The machine was only used briefly for demonstration purposes in our workshop. Therefore, it can be described as being in new condition and comes with a full warranty. Technical specifications: - Jointer/planer width 310 mm - 3 cutterblocks (reversible cutter system) - Planing height 4-225 mm - Tilting circular saw 90-45° - Sliding table 1250 mm Djdpezxdrlofx Aa Hokt - Miter gauge - 3 motors, each with 4 hp The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, circular saw Reference: R-D1618-37

Year of construction: 2015, condition: used, Power Input AC220V/AC380V Rotation Motor AC 1.5Kw Tilt Motor AC 1.5Kw Max. Capacity 3000 Kg Center of gravity 300mm Eccentricity 200mm Table Dimension 1400mm Dsdpfxscqxxgj Aa Hekt Rotation Speed 0.05--0.5rpm Tilt Speed 0.6rpm Tilt Range 0--120°

Condition: good (used), Welding rotary table KT 500, with 100 mm through-hole Load capacity, horizontal: 500 kg, tilted: 250 kg Power supply: AC 380 V, 50 Hz Rotary motor: AC 400 W Table diameter: 700 mm Djdpfxsb U Havs Aa Hekt Height: 700 mm, width: 800 mm, length: 800 mm Weight: 155 kg Tilting range, continuously adjustable electrically: 0 – 90° Speed: 0.3 – 2.5 rpm Welding current transmission, max.: 500 A Includes: hand-held remote control, foot-operated remote control Optional extra: Quick-release chuck Diameter: 400 mm, €530 CE marking/approval

Condition: good (used), Baumann BSB-2 Paper Jogger The machine is 100% functional and ready to use. Technical specifications: Maximum format: 640×920 mm Stack height: 160 mm Weight: 350 kg Djdpezvgkfefx Aa Hokt Power supply: 400 V Air table Tilt angle adjustment

Condition: good (used), functionality: fully functional, load capacity: 300 kg, Equipment: foot remote control, Welding positioner KT 600, Horizontal load capacity 600 kg, tilted 300 kg Power supply AC 380V, 50 Hz Drive motor AC 400W Table diameter 700 mm Height 700 mm, width 800 mm, length 800 mm Weight 155 kg Infinitely variable electric tilt 0–90° Speed 0.1–2.0 rpm Max. welding current transmission 400 A Includes hand and foot remote control Optional at extra cost: Quick-change 3-jaw chuck Diameter 400 mm, €550 CE mark/approval Dkedpjxxvwtsfx Aa Het

Condition: good (used), Polar Mohr RA-4 Paper Jogger The machine is in very good condition and ready to work. This is the latest design from a German manufacturer. Technical specifications: Dedpfxszurzgj Aa Hokt Maximum format: B1+ Stack height: 150mm Weight: 550kg Power supply: 400V Air squeezing shaft Air table Right/left shaking option Tilt angle adjustment Jogging frequency adjustment (inverter) Adjustable air squeezing shaft force and speed. Chrome-plated table surface

Condition: good (used), Perfecta SA-110A Paper Jogger Machine serviced and ready for operation. Equipped with an air squeezing roller. Technical specifications: Maximum format: 765 x 1090 mm Stack height: 165 mm Weight: 550 kg Power supply: 400V Air table Dkjdpfozur Dnsx Aa Hst Air squeezing roller Adjustable: tilt angle, shaking force, roller pressure, table height up to guillotine height.

Condition: good (used), functionality: fully functional, load capacity: 300 kg, Welding rotary table APS 300, fully functional with jaw chuck Speed continuously adjustable approx. 0.01 - 3.5 rpm. Swivel range approx. 180 ° Height horizontal approx. 1100 mm Dedevnz Iyopfx Aa Hekt Height tilted approx. 900 mm

Condition: used, Year of construction: 1995, functionality: fully functional, SCM si150 Panel Saw Specification: • Condition – used, after a comprehensive overhaul • Manufacturer – SCM • Model – si 150 • Sliding table length: 150 cm • Blade diameter: 300 mm • Machine equipped with a scoring unit • Main saw motor: 4.0 kW • Blade tilting: manual Dkjdpfx Aajyy Sq Uo Hst • Manual blade raising and lowering • Blade guard on spring support • Maximum cutting height: 95 mm • Side table dimensions: 85 x 60 cm • Extraction port diameter: 100 mm • Cart with wheels for machine relocation included • Weight: 480 kg • Year of manufacture: 1995 • Overall dimensions: 151 x 270 x 137 cm (W x L x H) • Transport dimensions: 151 x 125 x 137 cm (W x L x H) Additional information: • The machine is in good technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Testing and demonstration on-site available • Free training on machine operation (at company headquarters) • The auction price does not include VAT or transport costs Financing and transport: • We organize transport with our MDD fleet, courier services, or external carriers • Financing available through leasing or a lease loan

Condition: good (used), 2 units of welded rotary table with a load capacity of 600 kg, very robust Speed continuously adjustable from approximately 0.01 to 2.0 rpm Rotary table diameter 700 mm Tilting up to 135° Dksdpfx Aaeig T Dro Hst Height in horizontal position 850 mm, when tilted to the center 630 mm Length 1.4 m x Width 0.8 m With foot and hand remote control Price per unit

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, Motor power 50Hz 3~ 400V 5.5kW Sliding table 2800 mm without scoring saw Digital angle adjustment display Digital speed display Hydraulic lifting / lowering / tilting Cutting width 1005 mm Manual parallel fence LAP laser system Mitre fence (small) Dsdpfx Aaey Icbgj Hjkt Saw blade diameter 250 - 450 mm

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Dodpfozrd Tvjx Aa Hokt

Condition: new, Year of construction: 2026, The CORMAK MJ45-KB4 sliding table saw is an industrial panel saw with a scoring unit, designed for precise cutting of furniture boards, plywood, and other wood-based materials. The 2600 mm sliding table and robust construction ensure repeatability and high cutting quality. Key advantages of the machine Scoring unit with a separate motor – eliminates chipping on laminates and veneers. Aluminum sliding carriage running on hardened steel guide bars – ensures rigidity and smooth feed. 2600 mm sliding table – reliable handling of large and heavy panels. Main motor 5.5 kW – consistent cutting quality in continuous operation. Tilt range 0–45° – flexibility when cutting angled components. Extendable telescopic fence up to 3100 mm – fast and repeatable settings. Rotational speeds 4000/6000 rpm (main blade) and 8000 rpm (scoring blade) – optimal adjustment to material type. Cast iron body – vibration damping and cutting system stability. Construction and technology The design is based on a torsion-resistant cast iron body, which stabilizes the saw unit and minimizes vibrations. The aluminum carriage moves on hardened rods, ensuring long-term precision. The outrigger table facilitates handling large panels without additional support. Adjustment mechanisms with clear readouts (including angle indication on the handwheel) allow for quick and precise setup. Precision and performance The MJ45-KB4 sliding table saw ensures clean edges thanks to the 125 × 20 mm scoring blade and stable guide geometry. The cutting height range up to 90 mm at 90° and 56 mm at 45° allows processing of a wide range of formats and thicknesses. Two main blade speeds enable parameter adjustment to the material type, maintaining dimensional repeatability and reducing the need for rework. Applications The machine is dedicated to workshops and production facilities seeking a stable panel saw with a scoring unit for serial cutting of furniture and structural elements. It meets the requirements of plants where quality, dimensional accuracy, and reliability in multi-shift operation are essential. Standard equipment Scoring unit with separate drive 2600 mm sliding table on guide bars Dial indicator for blade tilt Telescopic fence up to 3100 mm (front/rear mounting on support table) User manual in Polish CE declaration of conformity Optional equipment Set of saw blades for wood and laminate Dust extraction systems Panel transport trolley Technical specifications Dsdpfxeywkc Dj Aa Hjkt Sliding table length: 2600 mm Cutting width: 1250 mm Saw tilt: 0–45° Cutting height at 90°: 90 mm Cutting height at 45°: 56 mm Max main blade diameter: 315 mm Max scoring blade diameter: 125 mm Main blade speed: 4000 / 6000 rpm Scoring blade speed: 8000 rpm Main motor power (continuous S1/S6): 5.5 kW Scoring motor power (continuous S1/S6): 0.75 kW Weight: 650 kg

Condition: good (used), Baumann BSB 3L Paper Jogger The machine is 100% functional and in very good condition. This is the latest design from a German manufacturer. Technical specifications: Maximum format: 1150x900mm Stack height: 160mm Weight: 550kg Dksdpfx Aozur Erea Het Power supply: 400V Air squeezing roller Air table Tilt angle adjustment Jogging frequency adjustment (inverter) Adjustable air squeezing roller force and speed. Chrome-plated table surface