Used Tilting Shaper for sale (3,916)

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 505004, total width: 970 mm, total length: 680 mm, total height: 700 mm, empty load weight: 250 kg, input voltage: 380 V, Manufactured: 08/2005 Power: 0.55 kW Power supply: 220/380 V three-phase 50 Hz Dough weight: 50 to 1200 g Production: 1200 pieces/hour External casing made of stainless steel Mechanical side adjustments Forming belts Output receiving table Emergency stop on the front panel Dimensions: 970x680x700 mm Weight: 250 kg Used SINMAG SM-380S dough sheeter The used SINMAG SM-380S dough sheeter is designed for professional dough shaping in bakeries. This unit, manufactured in August 2005, features a 3-cylinder system, mechanical adjustments, and felt conveyor belts. Its nameplate indicates a power of 0.55 kW and a 220/380 V three-phase 50 Hz power supply. The specific data for this machine is distinguished below from the characteristics derived from the European documentation for the range. Why this SINMAG SM-380S stands out The operation is based on the progressive rolling of the dough and then its elongation. The mechanical controls allow adjusting the passage through the cylinders according to the desired result. The documentation for this generation specifies that the right handle adjusts the spacing of the front cylinders, while the left handle adjusts the inclined cylinders to adapt the final length. Fgjdpjz Eht Defx Aa Ieh This design allows bakers to work with different dough weights without complex electronic programming. The European documentation associated with this version states a range of 50 to 1,200 g and a shaping width of 750 mm. Key advantages 3 cylinders for rolling and shaping Mechanical adjustments for rolling and length Felt conveyor belts Stainless steel construction, as documented for the SM-380S version Extendable receiving table Emergency stop present on this unit Wide range of documented dough weights Detailed technical specifications

Condition: used, Year of construction: 2010, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: 358/211/10, tank capacity: 800 l, usable tank capacity: 800 l, total length: 2,200 mm, total width: 1,800 mm, total height: 1,050 mm, overall weight: 800 kg, wall material: stainless steel, wall structure: double-walled, number of chambers: 1, manhole location: bottom, operating temperature: 130 °C, power: 40.5 kW (55.06 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, Equipment: hot water, For sale is a high-capacity, heavy-duty Jugema 800 kg (800 Liter) Industrial Tilting Bratt Pan, engineered specifically for high-volume food processing, mass catering, and central production kitchens. Built entirely from premium-grade, acid-resistant stainless steel, this exceptionally versatile machine excels at braising, stewing, boiling, frying, and reduction processes for large batches. Jugema is globally renowned for robust food processing machinery, and this machine is a true workhorse designed for decades of reliable, intensive service Fodpfx Aezzdv Nsa Isgh

Condition: used, Year of construction: 2005, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 10910806050010, tank capacity: 350 l, usable tank capacity: 300 l, total length: 1,560 mm, total width: 1,560 mm, total height: 1,100 mm, inner diameter: 300 mm, outer diameter: 450 mm, overall weight: 410 kg, wall material: stainless steel, wall thickness: 12 mm, wall structure: double-walled, manhole location: top, reception height: 600 mm, discharge height: 600 mm, operating temperature: 120 °C, operating pressure: 1 bar, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, The Metos Viking Combi 300E is a high-performance, Finnish-made heavy-duty industrial mixing and cooking kettle. The primary physical, structural, and technical documentation outlines the exact specifications for this 300-liter model: 📐 Dimensions & Clearance: Width: 1,560 mm Depth: 1,100 mm (varies up to 1,165 mm depending on the specific safety lid protrusion). Height: 900 mm to the kettle lip / 1,535 mm total height including the elevated control pillar. Tilting Discharge Height: 600 mm clearance from the floor when tilted. ⚖️ Weight: Net Weight (Empty): 410 kg (Standard 4G model) / Up to 414 kg depending on the configuration of structural sub-surface installation frames. Shipping Weight: Approx. 545 kg packed. ⚡ Electrical & Heating Power Voltage Requirement: 400/230 V, 3NPE, 50/60 Hz Total Power Consumption: 43.6 kW Amperage/Fuse Size: 80 A Heating System: Steam-jacketed indirect electrical system (maximum working pressure of 1.0 bar, yielding up to +120°C inside the jacket). 🚰 Utility Connections: Cold Water (CW): R½" (Ø15 mm) connection. Hot Water (HW): R½" (Ø15 mm) connection. Fsdpfxezzxyij Aa Iogh Connection Heights: Water inlets enter at roughly 270 mm from the floor; the main power cable input gland enters at 510 mm. ⚙️ Operational Features: Integrated Mixer: Stepless variable mixing speeds from 20 to 110 RPM with an auto-reverse program and structural scrapers. Tilting: Smooth, heavy-duty electrical motor-driven tilting mechanism.

Condition: used, mileage: 70,680 km, power: 125 kW (169.95 HP), first registration: 05/2021, fuel type: diesel, empty load weight: 2,305 kg, maximum load weight: 1,195 kg, overall weight: 3,500 kg, tire size: 235/65 16C, tire condition: 100 %, axle configuration: 4x2, wheelbase: 3,750 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, total length: 3,550 mm, loading space volume: 2 m³, loading space length: 3,550 mm, loading space width: 2,055 mm, loading space height: 400 mm, operating hours: 70,680 h, front tire size: 235/65 16C, rear tire size: 235/65 16C, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), hydraulics, immobilizer system, onboard computer, sliding door, truck registration, Vehicle number for inquiries: 812311 Mercedes-Benz, Sprinter * Year of manufacture: * ABS, Anti-lock Braking System * ESP * Power windows * Air conditioning * Leather interior * Power steering Fgodpfx Aszv Dpfea Ijh * Immobilizer * Central locking * Tilting hydraulics * On-board computer * Aluminum tipper body * Radio/CD player * Bluetooth * USB interface * Airbag * Electric windows and mirrors * Remote central locking * MP3 interface * Multifunctional steering wheel * Transmission type: Manual transmission * Suspension: Leaf spring * Gross vehicle weight: 3,500 kg * Unladen weight: 2,305 kg * Payload: 1,195 kg * Permissible gross vehicle weight: 3,500 kg * Tire condition, front axle: 100% - 100% - Tire size: 235/65 R16C * Tire condition, rear axle: 100% - 100% - Tire size: 235/65 R16C * Wheelbase: 3750 mm * Tire sizes: 235/65 R16C * Internal dimensions: L=3550 mm, W=2055 mm, H=400 mm * Internal volume*: 3 m³ * Pallet spaces: Disclaimer: Subject to changes, prior sale, and errors excepted. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained staff, we will be happy to advise you.

Condition: excellent (used), Year of construction: 1993, Enorm edge sanding machine (now Kündig) Fgsdpfxszbyt Eo Aa Ish In very good condition. Type: LBK 160 Year of manufacture: 1993 With veneer edge sanding attachment Oscillation can be switched on. Electric height adjustment of the sanding unit Table can be tilted up to 45 degrees Sanding belt width 150 mm Sanding belt length 2600 mm 3 kW motor 2 additional motors for height adjustment and oscillation With feed system Weight approx. 400 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 10/2026, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,600 mm, loading space width: 2,200 mm, loading space height: 450 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Are you looking for a different model, engine variant, size, or further features? Feel free to contact us. We offer financing and leasing on attractive terms – also for the Netherlands, Austria, and for new business founders! ----VEHICLE * Wheelbase: 3450mm * Manual gearbox * Single cab * Twin rear tires * Gross weight 7.2 tons SEATING * Seatbelt pretensioner passenger side * Fabric seat covers ELECTRICS/LIGHTING ConnectivityBox 4G * Daytime running light function * Accident data recorder * EC digital tachograph 4.1 * Battery 12 V 105 Ah (AGM) * Light and rain sensor * Manual high beam control * Additional speed limiter * Switch for body lighting * 12V 13-pin trailer socket CAB EXTERIOR Mirrors for body width 2350 mm * Wide wheel arch covers * Blind spot radar behind cab * Fuel filler neck in B-pillar * Turn assist on passenger side (BSIS) * Tire pressure monitoring system (TPMS) * Front area monitoring (MOIS) * Proactive steering assistant with lane monitoring (ELK) * Emergency brake assistant AEBS with City Brake * Electrically adjustable and heated exterior mirrors * Mud flaps on front axle * Additional vehicle key with remote control CAB INTERIOR/AUDIO Advanced Driver Distraction Warning * Central locking with remote control * Grab handle on A-pillar * Rear wall insulation * Traffic sign recognition with intelligent speed assistant (ISA) * Electric windows for front doors * Left-hand drive for right-hand traffic * Front airbags for driver and passenger with seatbelt pretensioners * Pre-installation for alcohol interlock * Speed limiter 90 km/h * Overhead storage above windscreen * Smoker package, ashtray and cigarette lighter * 12V socket for windscreen OBU CHASSIS Spare wheel holder at rear frame * 20-liter AdBlue tank under cab * Weight variant 2500/5350 kg * Spare wheel, dimension matches vehicle tires * Rear underrun protection Fodpfx Aaex S S N Ue Ijgh * ESP system * 90l integrated fuel tank * Manual central parking brake * Tires 225/75 R16 * Reinforced front axle * Towbar with ball head ENGINE/TRANSMISSION/AXLES * PTO preparation * Rear axle ratio i 4.23 * Standard oil pan * Aluminum radiator * Emission standard EURO VI E * Heated crankcase breather * Settings for special fuels (HVO/GTL) * Heated fuel filter * Comfort noise insulation * Manual gearbox FT 50.6 * Alternator 3500 Watt (14 Volt x 250 Ampere) * Operating instructions in German * 4x2 MY24 * Tires 225/75 R 16 All-Season * Electronic operator and maintenance manual – operating instructions available via App (Iveco Easy Guide) COMFORT PLUS USB sockets driver and passenger side * My Iveco Infotainment 10 inch with navigation * Integrated Alexa voice assistant * Passenger bench with multifunction storage tray and compartment * Fog lights * Air conditioning with automatic climate control, pollen filter, and outside temperature display * Distance control cruise control (ACC) * 170cc climate compressor * Comfort headrests WINTER * Auxiliary hot water heater * Luxury driver’s seat with armrest and lumbar support, adjustable in height, tilt, and longitudinal direction, hydraulically suspended, heated * Heated windscreen CONSTRUCTION * Electronic differential lock (EDS)

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 10/2026, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,600 mm, loading space width: 2,100 mm, loading space height: 450 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Are you looking for a different model, engine variant, dimensions, or other specifications? Feel free to contact us. We offer financing and leasing at attractive terms – also available for the Netherlands, Austria, and startups! ----VEHICLE * Wheelbase: 3450 mm * Manual transmission * Single cab * Dual rear wheels * Gross weight: 7.2 tonnes SEATING * Belt tensioner on passenger side * Fabric seat covers ELECTRICAL/LIGHTING & CONNECTIVITY * 4G ConnectivityBox * Daytime running lights * Accident data recorder * Digital tachograph (EU standard) 4.1 * 12V 105 Ah (AGM) battery * Light and rain sensor * Manual high beam control * Additional speed limiter * Switch for body lighting * 12V 13-pin trailer socket CAB EXTERIOR * Mirrors for body width 2350 mm * Wide wheel arch covers * Blind spot radar behind cab * Fuel filler neck in B-pillar * Turn assist system passenger side (BSIS) * Tire pressure monitoring system (TPMS) * Front field monitoring (MOIS) * Proactive steering assistant with lane monitoring (ELK) * Emergency braking assistant AEBS with city brake * Electrically adjustable and heated exterior mirrors * Mud flaps front axle * Additional vehicle key with remote control CAB INTERIOR/AUDIO * Advanced Driver Distraction Warning system * Central locking with remote control * Grab handle on A-pillar * Rear wall insulation * Traffic sign recognition with Intelligent Speed Assist (ISA) * Electric window lifters for front doors * Left-hand drive for right-hand traffic * Front airbags for driver and passenger with belt tensioners * Preparation for alcohol interlock device * Speed limiter 90 km/h * Roof shelf above windscreen * Smoker package, ashtray and cigarette lighter * 12V socket for windscreen OBU CHASSIS * Spare wheel holder at frame end * 20-litre AdBlue tank under cab * Weight configuration 2500/5350 kg * Spare wheel same dimension as vehicle tires * Rear underrun protection * ESP system * 90L integrated fuel tank * Manual parking brake in center * 225/75 R16 tires * Reinforced front axle * Ball-type trailer hitch ENGINE/TRANSMISSION/AXLES * PTO preparation * Rear axle ratio i 4.23 * Standard oil sump * Aluminum radiator * Emission standard EURO VI E * Heated crankcase ventilation * Settings for special fuels (HVO/GTL) * Heated fuel filter * Comfort sound insulation * Manual gearbox FT 50.6 * Alternator 3500 Watt (14 Volt x 250 Ampere) Fgsdpfjx S S Rfex Aa Ieh * Documentation in German * 4x2 MY24 * 225/75 R 16 all-season tires * Operating and maintenance manual available electronically – user manual accessible via app (Iveco Easy Guide) COMFORT PLUS * USB port driver and passenger side * My Iveco 10-inch infotainment with navigation * Integrated Alexa voice assistant * Passenger bench with multifunction tray and storage compartment * Fog lights * Air conditioning with automatic climate control, pollen filter, and outside temperature display * Adaptive cruise control (ACC) * 170 cc air conditioning compressor * Comfort headrests WINTER * Additional hot-water heater * Luxury driver's seat with armrest and lumbar support, adjustable for height, tilt, and longitudinal position, hydraulically suspended and heated * Heated windscreen CONSTRUCTION * Electronic differential lock (EDS)

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 10/2026, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,000 mm, loading space width: 2,200 mm, loading space height: 1,370 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Are you looking for a different model, engine type, dimensions, or additional features? Feel free to contact us. We offer financing and leasing at attractive conditions – also available for the Netherlands, Austria, and start-up businesses! ----VEHICLE * Wheelbase: 3450 mm * Manual transmission * Single cab * Twin rear tires * Gross vehicle weight: 7.2 tons SEATING * Seat belt tensioner, passenger side * Fabric seat covers ELECTRICS/LIGHTING ConnectivityBox 4G * Daytime running lights * Accident data recorder * Digital tachograph (EG 4.1) * 12V 105 Ah AGM battery * Light and rain sensor * Manual high beam control * Additional speed limiter * Switch for body lighting * 13-pin 12V trailer socket EXTERIOR CAB * Mirrors for body width 2350 mm * Wide wheel arch covers * Blind spot radar behind the cab * Fuel filler neck integrated in B-pillar * Turn assist, passenger side (BSIS) * Tire pressure monitoring system (TPMS) * Front detection assist (MOIS) * Proactive steering assistant with lane keeping (ELK) * Emergency brake assist (AEBS) with city brake function * Electrically adjustable and heated exterior mirrors * Mud flaps on front axle * Additional vehicle key with remote control INTERIOR CAB/AUDIO * Advanced Driver Distraction Warning system * Central locking with remote control * Grab handle on A-pillar * Rear wall insulation * Traffic sign recognition with intelligent speed assistant (ISA) * Power windows for front entry doors * Left-hand drive for right-hand traffic * Front airbags for driver and passenger with belt tensioners * Preparation for alcohol interlock * 90 km/h speed limiter * Overhead storage above windshield * Smoking package: ashtray and cigarette lighter * 12V connector for windshield OBU CHASSIS * Spare wheel storage at rear frame * 20-liter AdBlue tank under cab * Weight variants 2500/5350 kg * Spare wheel, same size as vehicle tires * Rear underrun protection * ESP system * Integrated 90-liter fuel tank * Central manual handbrake * 225/75 R16 tires * Reinforced front axle * Ball-type trailer hitch ENGINE/TRANSMISSION/AXLES * PTO preparation * Rear axle ratio i 4.23 * Standard oil sump * Aluminum radiator * Emissions standard EURO VI E * Heated crankcase ventilation * Settings for special fuels (HVO/GTL) * Heated fuel filter * Enhanced comfort soundproofing * Manual transmission FT 50.6 * Alternator 3500 Watts (14 Volts x 250 Amps) * Documentation in German * 4x2 MY24 * All-season 225/75 R16 tires * Electronic operating and service manual – available via app (Iveco Easy Guide) COMFORT PLUS * USB sockets on driver and passenger sides * My Iveco Infotainment 10” with navigation * Integrated Alexa voice assistant * Passenger bench seat with multifunction tray and storage compartment * Fog lights * Air conditioning with climate control, pollen filter, and outside temperature display * Adaptive cruise control (ACC) * 170ccm air conditioning compressor * Comfort headrests WINTER PACKAGE * Auxiliary hot water heater * Luxury driver seat with armrest and lumbar support, height, tilt and longitudinally adjustable, hydraulically suspended, heated Fedpfsx S S R Esx Aa Isgh * Heated windshield CONSTRUCTION * Electronic differential lock (EDS)

Condition: good (used), mileage: 142,900 km, power: 390 kW (530.25 HP), first registration: 06/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, total length: 5,990 mm, total width: 2,530 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, parking heater, power mirror, spoiler, = Additional Options and Accessories = - Adaptive Cruise Control - Aluminum fuel tank - Roof spoiler - Euro 6 emission standard - Height-adjustable steering wheel - Tilting hydraulics - Air conditioning - Leather steering wheel - Air suspension - Front center armrest - Radio with MP3 support - Sleeper cab - Sun visor - Auxiliary heater - Power Take-Off (PTO) = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Front axle: Max. axle load: 8,000 kg; Steered Rear axle: Dual tires; Differential lock; Max. axle load: 11,500 kg Weights Fgjdpsxbrmvofx Aa Ish Unladen weight: 8,292 kg Payload: 12,708 kg GVWR: 21,000 kg Interior Upholstery: Leather Maintenance, History, and Condition APK (Technical Inspection): Valid until 10/2027 Technical condition: good Optical condition: good Identification License plate: 57-BXX-8

Condition: used, mileage: 549,276 km, power: 294 kW (399.73 HP), first registration: 10/2007, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: orange, gearing type: mechanical, emission class: euro4, total length: 8,900 mm, total width: 2,550 mm, total height: 3,300 mm, Equipment: ABS, air conditioning, soot filter, MAN 26.400 TGA MEILLER Roll-off Tipper 6x4 Suspension: Leaf-leaf Wheelbase: 4500 mm Payload: 13605 kg Meiller Roll-off System Type: RK 20.65 Special equipment: Work lights (2) on the cab roof, Exterior mirrors, wide-angle and electrically adjustable and heated, left, Curb mirror, right, electrically adjustable and heated, Air horns on the cab roof (2), Cab: with 2 rear window panes, Cab: with exterior grab handle, Cab: with air suspension, Flame start system, Catalytic converter, Automatic climate control, Heated fuel filter, Fuel tank: 400 liters, aluminum, Heated air dryer, Retarder, Seat cover/upholstery: comfort quality, Exterior sun visor, Cab socket 12V and 24V, Front axle shock absorbers, reinforced, Viscous fan Additional equipment: Axle configuration: 6x4, Front axle load: 8.0 t, Approach/front mirror, Trailer socket 24V / 7-pin, Trailer socket ABS, Anti-slip control (ASR), Exterior mirrors, electrically adjustable and heated, Exterior mirrors, wide-angle and electrically adjustable and heated, right, Battery 175 Ah, Battery box, Fodjzwyngopfx Aa Iegh On-board computer MAN-Tronic, Rear axle differential lock, Dual headlights, halogen, EDC engine control, Electronic braking system MAN-Brakematic, EURO 4 engine, Cab: M (medium length), Manually operated sunroof, Sunblind for windshield, Driver's seat, comfort, Driver's seat, air-suspended, Tachograph, Suspension: Leaf / Leaf, Electric window lifts, Generator 100 A, Rear axle HY-1370, Interior filter: pollen filter, Tilt lever - EVB brake, Steering column (steering wheel) adjustable, Air compressor, 1-cylinder, Engine 10.5 liters - 294 kW diesel, Radio preparation 24V, Wheelbase 4500 mm, Disc brake, rear axle, Disc brake, front axle, Side protection, Side windows, Stabilizer on one rear axle, Front axle stabilizer, Bumper in plastic version, Cross member for trailer coupling, Rear underrun protection, Front axle VOK-08, angled, Immobilizer, electronic, Central locking, Permissible total weight 26.0 t We will also be happy to assist you with financing/leasing through our partners. All information is without guarantee. Errors and prior sale are reserved.

Condition: used, maximum load weight: 33,910 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 11/2025, next inspection (TÜV): 11/2026, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle STAS Walking Floor Semi-trailer, 90 cbm First registered 11/2025 Internal dimensions (L x W x H): 13,500 x 2,475 x 2,641 / 2,752 mm Axle distance: 1,310 mm Unladen weight: 8,090 kg Saddle height: 1,150 to 1,200 mm Chassis made of steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced “CD” version WABCO trailer EBS with anti-roll system (RSS) WABCO Smartboard with axle load display 1st and 3rd axles are lift axles Air tank, aluminum Tire size: 6x 385/65 R 22.5 JOST full-load swivel saddle Lighting: ASPÖCK full-LED 4 x LED work lights Toolbox at the rear, on the left side Side walls with profile joints, completely welded on the inside CARGOFLOOR sliding floor with 21 slats, material thickness 10 mm, ribbed Control system with WIRELESS REMOTE CONTROL End plate at the rear made of stainless steel 3 load securing bars, reinforced version for waste transport Reinforced roof tarpaulin, Panama 900 g Cleaning door in the front wall Rear crossbar can be tilted and unlocked from below! Ideal for bale transport RENTING is the new BUYING, and with us, it is immediately available even in FULL-SERVICE RENTAL. Fgodpfx Aoyih R Sea Ijh

Condition: excellent (used), Manufacturer: SHW Machine tools Fgodpfoftc Uxox Aa Ioh Type: UF 21 / UF 31 Travel distances X,Y, Z: 1000, 700,625mm Control: -Machine 1: Heidenhain TNC 355 -Machine 2: Heidenhain TNC 415 Table: NC rotary table 1100x840mm Automatic swivel head Sleeve 120mm Milling spindle holder SK 50 Speed 2500 rpm As we offer several machines of this series, the pictures advertised are only sample pictures of comparable machines. Please send us your individual (control, table size, tilting & tilt) equipment, etc.) request, so that we can offer you a machine suitable for your requirements. MBM Maschinenservice & Gebrauchtmaschinen GmbH, is an independent specialist for SHW milling machines. Our main focus lies in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Our services: - Used machines - Spare parts - Customer Service - Machine Service - Machine overhauls - Control system modernisation

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,620 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,120 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, side walls 600 mm high, galvanized, wide tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear walls, side walls with pivoting and folding function, side walls with spring relief, bed made of fine-grained steel, 4 mm thick, 12 strong lashing eyes recessed in the floor, tilting angle: 50 degrees to the rear and 45 degrees to the side, continuously adjustable drawbar height, rear stakes can be inserted, geared support winch with load and fast gear, at the front, receiving shaft for two aluminum ramps integrated into the chassis, contour marking according to ECE R 048 regulation, surcharge for aluminum ramps, load capacity per pair 10 tons and 2 x folding supports, at the rear, ramps suitable for vehicles with steel tracks and rubber tires, price: 1,900 euros, typographical errors, errors and changes reserved, sample images, more data at: !, More details: ! Fgedoz I Sh Djpfx Aa Ieh

Condition: used, mileage: 43,063 km, power: 125 kW (169.95 HP), first registration: 03/2025, fuel type: diesel, empty load weight: 2,285 kg, maximum load weight: 1,215 kg, overall weight: 3,500 kg, wheelbase: 4,325 mm, next inspection (TÜV): 09/2028, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, number of seats: 3, loading space volume: 14 m³, loading space length: 4,307 mm, loading space width: 1,787 mm, loading space height: 1,899 mm, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), navigation system, onboard computer, parking sensors, power assisted steering, seat heater, second-hand vehicle warranty, sliding door, soot filter, Exterior * Electrically retractable exterior mirrors * Heated and electrically adjustable exterior mirrors * Grab handle at the entrance to the cargo area sliding door, on the partition * Sliding door, right side * High roof * All-season tires Interior * Outside temperature display * Comfort headrest for driver * Double passenger seat * Comfort driver's seat * Full-height partition * Interior light(s) in the rear/cargo area with door contact switch Safety * Adaptive brake light * Driver airbag * Front passenger airbag Comfort and Environment * Rear doors, two-leaf, opening to the side * Attention Assist * Hill-start assist * ECO start-stop function * Headlight assistant * Crosswind assist * Blind spot assist * Traffic sign assist * Reversing warning * Electric auxiliary heater * Mercedes-Benz emergency call system * Leather steering wheel * Multifunction steering wheel * Cruise control * Rain sensor Multimedia * Live traffic information * Instrument cluster with color display * Digital radio (DAB) with Bluetooth hands-free system Equipment lines and packages * Winter package Condition/Documents * COC papers Other * 3.5-ton vehicle * 9G-TRONIC automatic transmission * Cornering assist * Storage compartment above the windshield * Storage compartment under the cockpit * Towing eye, rear * Active brake assist * Active lane keeping assist * Acoustic package * Towing capacity up to 3,500 kg possible * Step at the rear doors * Exit lights * Cup holders, front * Digital operating manual * Digital extra: Hard disk navigation * Digital extra: Remote Services Plus * Third brake light * Anti-theft alarm system * Grab handle on the B-pillar, rear left * Grab handle on the B-pillar, rear right * Electric parking brake * Electrical wiring for trailer socket * Emission class Euro 6 * Vehicle HVO compatible * Protection against incorrect fueling * Generator 14 V / 250 A * Seat belt warning for front passenger * Seat belt warning for driver's seat * Semi-automatic TEMPMATIC climate control * Grab handles for driver and passenger entry * Main tank 93 liters * HOLD function * Wooden floor * Interior lining of the cargo area up to roof height (wood) * Intelligent Speed Assistant (ISA) * Coat hooks in the cab * Comfort roof control unit * Communication module (LTE) for digital services * Charging package, instrument panel * Cargo area package 2 * Cargo area lighting via motion sensor * Load securing rail system * LED light strip in the cargo area Fgsdpfxezk Ed Hs Aa Ijh * Steering wheel adjustable for tilt and height * MBUX multimedia system * OM 654 DE 20 LA 125 kW (170 hp) 3800/min * Parking package with reversing camera * Premium complete wheel protection (3 years) * Wheel arch loadable * Wheelbase 4325 mm, short overhang * First aid kit Other: * Nationwide delivery for €399 net plus VAT (€474.81 incl. VAT). * For all vans: On request, 12 or 24 months of Mercedes-Benz used car warranty can be arranged. * We would be happy to take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing / financing via Mercedes-Benz Bank. We will be happy to prepare an offer for you. * Ex-rental vehicle * No liability for printing and typographical errors * Errors and prior sale reserved.

Condition: used, mileage: 80,272 km, power: 260 kW (353.50 HP), first registration: 07/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, color: yellow, gearing type: automatic, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, Mercedes-Benz 1835 Arocs 5 + MEILLER 3Skipper Fassi F125A 4x Hydraulic Extension 4x2 Suspension: Leaf / Leaf Wheelbase: 3.90 m Payload: 7,345 kg Meiller 3Skipper Type: D9 Length: 4000 mm Width: 2400 mm Height: 700 mm Fassi crane behind the cab Type: F125A.2.24 5x Hydraulic extension 2x Hydraulic support legs 5+6th control Special equipment: Engine tunnel storage, high, Front axle load 8.0 t, Airbag, driver side, Audio system: Digital radio DAB / DAB+, Running board with handrail on the roof, Right exterior mirror with maneuvering position, Battery 220 Ah, Interactive cockpit multimedia system, Air horn, Driving assistance system: Autonomous emergency braking assistant (Active Brake-Assist 5), Driving assistance system: Lane keeping assistant, Driving assistance system: Traffic sign recognition, Cab: Rear reinforcement, Cab: Steel-sprung, comfort, Suspension: Rear springs 13.0 t, Suspension: Front springs 8.0 t, 3 leaves, Remote Online remote query function, Additional parking brake on the front axle, Vehicle without underride guard under the front bumper, Speed limiter, Rear axle bevel gear 300, Hydraulic pump (Meiller pump - 7 pistons - 270 / 63), Interior filter for construction site vehicles, Rear half shell fenders, Fedoy R Hf Ujpfx Aa Ijgh Heated fuel filter, Fuel tank: 290 liters, aluminum, left, Engine brake reinforced, Navigation system, Auxiliary drive MB 123-10c, Parameterizable special module, Wheelbase variant 3900 mm, Frame overhang 1200 mm, Smoker's package, Rain sensor, Reversing warning audible (external warning signal), Rear window, Seat cover / upholstery: Co-driver's seat velour, Seat cover / upholstery: Driver's seat velour, Seats in the cab: Driver's seat, comfort suspension seat, Exterior sun visor, Sunblind, side window, driver's door, Steel rims 11.75x22.5 (on front axle), Additional 24V socket in the co-driver's footwell, Front underride guard, Preparation for work lights on the upper rear cab wall Additional equipment: Emission standard EURO 6, ABS switchable, Axle configuration: 4x2, Approach / front mirrors heated, Trailer brake 2 - line, Connections on the left, Trailer socket 24V / 15-pole, AP axle (outer planetary rear axle), Arocs 5, Exhaust pipe to the center of the vehicle, Batteries arranged side by side, Compressed air connection in the cab, Compressed air tank steel, Compressed air unit with condensate monitoring, Compressed air unit medium, Automatic switching for dipped beam headlights (light sensor), Cab: Cab entry movable, Cab: Tilting mechanism hydraulic, Cab: M ClassicSpace, 2.30 m, tunnel 320 mm, Suspension: Leaf / Leaf, Window lifters electric, Windshield tinted, Generator 100 A, Transmission 8-speed - Type: G 140-8, Urea tank (AdBlue): 60 L, Lift roof manually (steel), Comfort central locking system, Steering wheel with multifunction buttons, Steering oil cooler, Air intake from the front, air compressor 1-cylinder, Air dryer heated, Engine 7.7 L - 260 kW R6 Diesel (OM 936), Engine variant OM 936, Ramp mirrors, Waste heat recovery, Disc brakes with full protection, Disc brakes front and rear axle, Side marker lights LED flashing, Seats in the cab: Co-driver function seat, Stabilizer rear axle, stabilizer front axle, 12V socket in the co-driver's footwell, Bumper corners in steel design, Truck Data Center 7 (fleet management system), Rear underride guard fixed, Preparation for Truck Data Center (fleet management system), Front axle straight, Permissible total weight 18.00 t, Oil cooler transmission We would als

Condition: used, maximum load weight: 34,422 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2027, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 55 m³, total length: 11,521 mm, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper, 55 cbm, "X-Shape" design First registered 01/2024, from first owner Delivered in Germany Mileage: 243,148 km Dimensions (L x W x H): 10,149 x 2,320/2,450 x 2,285 mm (tapered design in width) Unladen weight: only 7,578 kg Z-chassis, curved design Floor made of continuous 4 mm HardoX steel HB450 Front and side walls made of 3 mm HardoX steel HB450 Sloping front wall, with internal access steps 2-wing portal doors with PENDULUM FUNCTION/combination doors, pneumatic automatic release 2 grain slides with dust protection cover Reinforced roof cover HYVA tilting cylinder, Alpha type, suitable for high and low pressure ALU fifth wheel, full load capacity 2 air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: LIFT AXLE with starting aid WABCO trailer EBS with roll-over protection RSS WABCO Smartboard Automatic tipping lowering Lifting and lowering mechanism Tires: 385/65 R 22.5 ALCOA aluminum rims, Dura-Bright, high-gloss finish Aluminum access ladder Fodpfxoz I Hr Rs Aa Isgh Shovel and broom holder Toolbox on the right 4 LED reversing lights RENTING is the new BUYING; with us, it is also immediately available in a FULL-SERVICE rental package.

Condition: used, mileage: 114,850 km, power: 485 kW (659.42 HP), first registration: 09/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2027, brakes: retarder, color: red, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, R-sleeper cab CR 20 H Highline with 1 bed, SCANIA retarder type R 4700 D, original SCANIA auxiliary air conditioning system, automatic climate control, rain sensor, auxiliary heater, electric panoramic sunroof, exterior sun visor, premium driver's seat with air suspension, heated and air-conditioned, co-driver's seat with tilt adjustment, leather seats, electric windows (2-way), electrically adjustable and heated exterior mirrors, roof and side spoilers, aerodynamic side skirts, ABS, ESP, disc brakes with EBS, emergency brake assist, ACC - Adaptive Cruise Control, driver attention support, LDW - Scania Lane Departure Warning System, traction control, 12-speed SCANIA gearbox G 33 CM1 with 2-pedal Opticruise, auxiliary drive EG10R with 2-circuit tipping or sliding floor hydraulic system (switchable from low to high pressure), 570-liter aluminum tank on the left, 80-liter AdBlue tank, digital tachograph, LED headlights with automatic low beam, fog lights and additional high beam headlights in the front grille, on the cab roof and in the front bumper, LED daytime running lights and taillights, LED warning lights in yellow on the cab roof and in the front grille, work lights, air horns on the cab roof, instrument panel design "Luxury", onboard computer, digital Scania cockpit "Smart Dash", Stabo CB radio, multi-function leather steering wheel, refrigerator on the driver's side, central locking with remote control, exterior storage compartments on the left and right, air-suspended front axle and 4-bellow air-suspended rear axle, axle load indicator front and rear, ALCOA Dura Bright high-gloss polished aluminum rims, differential lock on the rear axle, wheelbase 3750 mm, technically permissible total weight 70,000 kg, well-maintained, 1st owner, like new overall condition! ! Original mileage (verifiable), Euro 6E engine (SCR Only), low noise, German vehicle with German documents, not a low-liner and not a mega semi-trailer tractor! Sale only to commercial businesses! All information without guarantee! Errors and prior sale reserved! ----More pictures will follow shortly! Vehicle is in transit! Fjdoz I Hf Dspfx Aa Ijgh

Condition: good (used), Year of construction: 2016, Holac WS 150 Cutter The WS 150 is the multipurpose dicer or size reduction machine for extra-high output levels. Its continuous product flow and cutting operation make it the perfect partner for pre-cutting meat and fat. Its gentle product handling, which avoids build-up of pressure or heat, guarantees the highest possible quality of the end- product. Single-part, all-plastic feed-auger, independent from cutting grid Adjustable speed of cutting blade and auger Product window in blade chamber Simple and effective sanitation Integrated lift-tilt mechanism (optional) Easy to integrate into continuous product lines Two-part grid Hardened shear edges and product stabilisers Simple and safe grid fixation Manufacturer: Holac Model: WS 150 Year: 2016 Capacity (depending on product): Max. 10.000 kg/h Loading dimensions WxHxL: 150x150x900 mm Fgjdpjub Rcuofx Aa Ijh Feed motion: 1-75 mm Power supply: 16 kW Cutting grid sizes: 6x6 mm – 75x75 mm Machine dimensions LxWxH: 2.275x1.325x2.170 mm Machine weight: 1.350 kg.

Year of construction: 2014, condition: excellent (used), Double finisher 842 Multimatic with control, manufactured in 08/2014, original price €20,110. Garment shaper and pant finisher rotatable on a single column. Finishing process in a closed cabin. Integrated cabin extraction system, automatically controlled. Doors close automatically. Flexible processing of different garments and sizes. Computer control with nine freely programmable memory locations. Airflow regulation for particularly delicate garments. Space-saving and virtually no emissions in the working area during the finishing process. Heated by external steam or fully electric with a built-in electric steam generator. Are you looking for an all-in-one solution for jackets and other items? - Multimatic Double Finisher 842 With the Multimatic Double Finisher 842, jackets, blazers, coats, trousers, and similar items can be automatically finished. It consists of a form finisher and a pant finisher. The two devices are rotatably mounted on a single column. To finish, the previously loaded element (form finisher or topper) is swung into a cabin. The doors close automatically, and the finishing process takes place in the closed cabin. Automatic finishing, high performance, energy-saving, low noise, and minimal space requirements. Manufactured in 08/2014, original price €20,110. The machine is in perfect working order. Fjdpfjgtidhex Aa Ijgh More items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Zanussi N7RE Electric Griddle with Open Base – Used With 2 heating zones, each 4.2 kW Working temperature of each heating zone is thermostatically adjustable from 120 - 280°C Griddle surface tilted 1.5° forward for fat drainage 1.5 mm thick front and top plate made of stainless steel, side and rear panels made of stainless steel Scotch-Brite finish, edges rounded on both sides IPX4 – splash-proof Comes standard with a grease collection tray and a 3-sided stainless steel splash guard With height-adjustable feet (+50 mm) Fgodpfx Aajxvy Hyo Ijh External dimensions (W x D x H): 800 x 700 x 850 mm Plate dimensions (W x D): 730 x 540 mm Cabinet (W x D x H): 680 x 640 x 420 mm Weight: 80 kg You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2009, Used Machine Year of Manufacture: 2009 Features and Technical Specifications: Professional crosscut, rip, and miter saw Motor power: 1.8 kW Power supply: 230 V Blade speed: 4,200 rpm Blade diameter: 255 mm Turntable diameter: 328 mm Maximum cutting capacity: 80 × 305 mm Miter adjustment: up to 45° to the left and right, and up to 60° to the right Saw head tilt: from -45° to 45° Locked positions: 0° / 15° / 22.5° / 31.6° / 45° to the left and right, and 60° to the right Cutting capacity at 45° tilt to the left: 42 × 305 mm Fjdpfx Aaozy D Ago Iogh Cutting capacity at a 45° tilt to the right: 35 × 305 mm Cutting capacity at a 45° miter to the left: 80 × 204 mm Cutting capacity at a 60° miter on the right: 80 × 147 mm Combined cutting capacity on the left: 42 × 204 mm Combined cutting capacity (right): 35 × 147 mm Dimensions L × W × H: approx. 1,200 × 700 × 450 mm Weight: approx. 24.2 kg Base plate and turntable made of die-cast aluminum Pulling function for wide workpieces Laser projection to display the cutting position Workpiece supports that extend on both sides Folding stops for repeated length cuts Adjustable, tall aluminum stops Screw clamp for securing workpieces Adjustable cutting depth limit Fine adjustment of the angle setting Saw blade guard Chip collection bag Easy saw blade change Suitable for cutting ceiling moldings and crown molding

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothG, total height: 2,840 mm, total width: 1,900 mm, overall weight: 7,100 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2020. It features a maximum spindle speed of 18,000 rpm and a rapid traverse rate of 30,000 mm/min. The machine includes a tool magazine capacity of 30 tools and a robust table size of 500 x 400 mm. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • CNC control: MAZATROL SmoothX with 19-inch colour touchscreenWorking capacity and travels • A-axis tilt: -120° to +30° • C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min Fedpfjz Iqgrjx Aa Isgh • A-axis index time: 0.6 s per 90° • C-axis index time: 0.55 s per 90° / 1.05 s per 180°Table and clearances • Tilting/rotary table (A/C axes) • Table size: 500 × 400 mm • Table with T-slots (as per final configuration) • Spindle nose to table surface (table horizontal): 50–560 mm • Spindle nose to table centre (table vertical): 40–550 mmSpindle • Spindle chiller with 16 L cooling oil tank • Programmable spindle orientation in 1° incrementsTool magazine and ATC • ATC with recovery function; digital magazine display and external operating panel • Tool selection: fixed addresses with automatic shortest-path selection • Pull stud: Yamazaki ANSI • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm • Max tool diameter with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 sMeasuring and probing • Renishaw RMP600 radio workpiece probe • MAZA-CHECK system • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement • Absolute positioning systemCoolant and chip management • Through-tool high-pressure coolant: approx. 15 kgf/cm² (≈14.7 bar), approx. 35 L/min • Coolant tank: 300 L • Coolant washdown system and manual washdown gun • Cooling for X/Y/Z ball screws • Workpiece air blastControl and software • MAZATROL SmoothX CNC • EIA/ISO programming package • Simultaneous 5-axis control • Additional 5-axis machining package for SmoothX • 3D coordinate rotation • Smooth synchronous tapping • G00 Slope Constant (rapid optimization) • Smooth restart • Tilted machining plane • Inverse Time Feed • Extended work offsets: 300 pairs • Variable macros: 600 variables • High-speed machining and smoothing • Geometric compensation for rotary axes • Interfaces: USB, LAN, SD cardConstruction, safety, and other features • Electronic handwheel • Three-colour signal tower • Automatic machine power on/off and warm-up • Roller linear guideways • Full enclosure with top cover; interlocked operator door • Work area lighting • Intelligent Safety Shield (ISS) • CE marking Additional equipment • CROWTHER right-side hinged-belt chip conveyor (for steel machining) • GX500 mist extraction unit with extraction preparation • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,396 h, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothX, workpiece height (max.): 350 mm, total height: 2,840 mm, total width: 1,900 mm, table load: 200 kg, overall weight: 7,100 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2018. It features a maximum workpiece diameter of 500 mm and a maximum table load of 200 kg. The machine is equipped with a 19-inch colour touchscreen and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality simultaneous 5-axis machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • Cutting time (“cutting only”): 14,396 h 54 min • Working capacity and travels • Max workpiece diameter: 500 mm; height: 350 mm • A-axis tilt: -120° to +30°; C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min Fgodpfx Ajz Ipzusa Ijh • A-axis indexing time: 0.6 s per 90° • C-axis indexing time: 0.55 s per 90° / 1.05 s per 180° • Guideways: Roller linear guideways • Table and clearances • Tilting/rotary table with A and C axes • Table size: 500 × 400 mm • T-slot table (as specified in final configuration) • Spindle nose to table surface, table horizontal: 50–560 mm • Spindle nose to table, table vertical: 40–550 mm • Spindle • Spindle chiller; spindle cooling oil tank: 16 L • Programmable spindle orientation in 1° increments • Tool changer and magazine • ATC with recovery function; digital magazine display; external magazine operating panel • Tool selection: fixed magazine addresses with automatic shortest-path selection • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm; with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 s • Measuring and probing • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement function • Absolute positioning system • MAZA-CHECK system • Preparation for RMP600 workpiece probe • Coolant and thermal management • Through-tool high-pressure coolant (~15 kgf/cm² ≈ 14.7 bar), flow ~35 L/min • Coolant tank: 300 L • Coolant washdown system • Cooling for X/Y/Z-axis ball screws • Control and software • MAZATROL conversational and EIA/ISO programming; simultaneous 5-axis control in EIA/ISO • G00 Slope Constant; Smooth restart; Tilted machining plane; Inverse Time Feed • Extended work offsets: 300 pairs; Variable macros: 600 variables • Polar coordinate programming; Tornado machining cycle • High-speed machining and smoothing; Geometric compensation for rotary axes • Seamless Corner Control; Variable Acceleration Control • Interfaces: USB, LAN, SD memory card • Safety, enclosure, compliance • Full working-area enclosure with top cover • Interlocked operator door; working-area lighting • Intelligent Safety Shield (ISS) • CE marking • Automation/operation aids • Automatic machine power on/off and warm-up Additional equipment • Right-side hinged-belt chip conveyor for steel machining • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2006, Esta Eurosog W/H 80.299 industrial vacuum cleaner As a powerful industrial vacuum cleaner, the EUROSOG-W is suitable for coarse, dry, fine, and free-flowing dust. The AC version is designed for occasional use in cleaning work in workshops. Its smooth-running wheels provide the industrial vacuum cleaner with high mobility. The spacious dust collection container has a capacity of 80 liters. Thanks to the patented tilting device, the dust can be disposed of effortlessly. Application areas for the EUROSOG industrial vacuum cleaners: AC version for occasional use For dry, coarse, and fine dust For cleaning machining tools For general cleaning work (e.g., workshop floors) Can be used in many industries (e.g., wood and metal industry) Metal industry Construction industry Wood industry Chemical industry Printing industry Flock industry Cleaning industry Craft trades Automotive industry Mechanical engineering Stone industry Paper industry Tobacco industry and many more Your benefits at a glance: Powerful industrial vacuum cleaner for dry dust Compact design Easy disposal of the dust collection bag Special features of the EUROSOG-W series: Manual brush cleaning Washable permanent filter cartridges, available for dust classes M and H Fgsdpfx Aaeivdt Ej Ioh Optionally available with M and H test certificates Patented, tilting filter housing Manufacturer: ESTA Absaugtechnik Type: Eurosog W/H 80.299 with TÜV test certificate, dust class "H" Vmax: 360 m³/h Vmin: 815 m³/h pumax: 180 mbar Filter area: 5 m² Max. air volume flow: up to 500 m³/h 230 V Year of manufacture: 2006 Item weight: 81.00 kg RRP: €4900.00 You can find more industrial vacuum cleaners in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2022, DOUBLE-SWIVELING SAW UNIT: MAXIMUM CUTTING HEIGHT WITHOUT COMPROMISE. RIP FENCE FULL SUPPORT & WIRELESS: APPLICATION AND PRECISION MECHANICS. CONSOLE eye-S: THE USER-FRIENDLINESS OF ACCESSING ALL FUNCTIONS VIA THE CONTROL. Technical data Linvincibile si x Max. cutting height at 90° (mm) 200 with 550mm saw blade Max. cutting height at +45° (mm) 130 with 550mm saw blade Max. cutting height at -45° (mm) 105 with 550mm saw blade Saw blade swivel angle (degrees) -46 ÷ +46 Raising and swiveling of the saw unit programmable Control/work height display Easy Touch Saw blade speed (rpm) 3000 ÷ 5000 (inverter) Main motor power kW (hp) 9 (12) Hz50 Format cuts: - with carriage 3200 (mm) - with carriage 3800 (mm) 3200x3200 3800x3200 Cutting width with parallel fence (mm) 1600 Dust extraction port diameter: - on the frame (mm) - on the saw blade guard (mm) - on the riving knife (mm) 120 100 Standard equipment: - Rip fence completely in aluminum structure with guiding system on dovetailed, hardened, and arc-ground steel guides with large contact area - Version with rip fence 3200 mm - 10-year warranty on the guiding system of the saw carriage - On/off switch for main saw/scorer on the rip fence - eye-S 15" electronic control unit complete with: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental mode: - Height adjustment of the main saw blade - Tilting of the saw unit - Parallel fence adjustment - Height and side adjustment of the scorer (the scorer is automatically raised to the set position when the power is turned on, and lowered when the power is turned off) * Speed adjustment with frequency converter * Operator assistance functions for performing complex cuts * Possibility of saving up to 1000 programs with relative images * Possibility of saving up to 1000 different tools with relative images * Cutting sequence control from preloaded parametric machining programs * Environment for creating and saving new sequential work programs * Automatic acquisition of work dimensions from the Thundercut app * USB port * Preparation for network connection - Auxiliary function of the electronic control with: * Determination of the correct stop position on the fence for format machining with a tilted saw blade * Determination of the correct stop position on the fence for angled cuts with a miter fence on the work table with or without a tilted saw blade - Swiveling control panel over the table - Programmable parallel fence with THK guide-controlled axis and guided by a stable ball screw with a travel speed of 25 m/min. - Parallel fence can be completely swung away under the work table, cutting width on the parallel fence 1600 mm - Support arm for the rip fence with positioning on prismatic linear guides with ball bushings - "Full Support & Wireless". Frame for miter cuts complete with wireless function. Adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system on magnetic strip and LCD display. Real-time updating of the position of the fence, with 3 LCD displays, when changing the saw blade swivel and/or the cutting angle. - Motor power 9kW (12hp) 50Hz - 11kW (15hp) 60Hz - Inverter for electronic speed control from 3000 to 5000 rpm Fgsdpjz Ny R Refx Aa Ioh