Used Thicknesser for sale (163)

Condition: repair required (used), Year of construction: 2024, For sale is a used Hammer planer machine A3-31 with a planing/thicknessing width of 310 mm. The machine is in like-new condition and has been refurbished and inspected by our qualified personnel. (Fully functional) Technical data: - Planing/thicknessing width 310 mm - Silent Power planing shaft - Planing table, dual folding - Planing fence, swiveling 90-45° - Thickness setting 4-225 mm - 4 HP (3 kW) motor, 400 volts - Machine no. 52.09.021.24 Iodszuxwhspfx Achetk The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planer, thicknesser, planing machine, surfacing, thicknessing Reference: R-AT18K

Condition: good (used), Jaroma Thicknesser Max. planing width: 530mm, Max. planing height: 200mm, 2 feed speeds, 3 conventional knives (wedge-type), Electric table adjustment (up-down). 2 rollers in the table. 7.5KW motor 130mm dust extraction port Itedpfsztaktox Achsk Machine ready for operation.

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 410 mm, tool diameter: 72 mm, number of blades: 3, actuation type: electric, rotational speed (max.): 6,000 rpm, total length of planing tables: 1,800 mm, overall weight: 355 kg, number of planer blades: 3, planer shaft diameter: 72 mm, - Year of manufacture: 2006 - Not repainted - Has undergone technical inspection - Operating manual, technical documentation TECHNICAL SPECIFICATIONS: - Planing width: 410 mm - Number of knives: 3 - Rotational speed: 6000 rpm - Diameter of the knife shaft: 72 mm PLANER: - Planning width: 410 mm - Maximum removal thickness: 4 mm - Length of planer tables: 1800 mm - Length of planer fence: 150 x 1100 mm THICKNESS PLANER: - Planning width: 404 mm - Length of thicknesser tables: 600 mm - Minimum/maximum planing height: 4/225 mm - Feed rate: 6 m/min - Motor power: 4 kW - Voltage: 3×400 V - Diameter of dust extraction port: 100 mm Itodpew H R I Sefx Achek Overall dimensions of the machine: - Length: 1950 mm - Width: 800 mm - Height: 1090 mm - Weight: 355 kg

Condition: excellent (used), Year of construction: 2019, Combined jointer and thicknesser SCM minimax fs 41e Year of manufacture: 2019 Power of drive motor: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Planer cutterhead type: TERSA – 4 cutterheads Speed: 5200 rpm Planing width, max.: 410 mm Feed rate: 6 / 12 m/min Dust extraction port: 2, diameter for thicknessing: 120 mm Jointer Infeed table, length: 1034 mm Chip removal, max.: 5 mm Itedpozi Nhmjfx Achek Dimensions and weights, length: approx. 2000 mm Width/depth: approx. 1110 mm Height: approx. 1115 mm Weight: approx. 430 kg TERSA cutterhead system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and uniform material feed. Material feed with two speeds. Numerical display for thickness table height. The 2,000 mm long jointer tables facilitate easy jointing of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them resistant and permanently flat. Sturdy, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height. The high machine weight ensures the highest precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction.

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale is a high-quality, all-in-one winter combination machine, type 5K 310-2600, manufactured in 2019. This machine combines several processing units in a compact design and is ideal for carpentry workshops, joineries, and demanding woodworking applications. The technical data has been taken from the nameplate. Itodpfxjzfilwj Achsk Technical data Manufacturer: Winter Holztechnik GmbH Type: 5K 310-2600 Year of manufacture: 2019 Machine no.: 201904001 Weight: approx. 575 kg Voltage: 400 V / 3 phases / 50 Hz Jointer and Thicknesser Motor power: 2.8 kW Planing width: 310 mm Knife shaft Ø: 70 mm 3 knives Knife shaft speed: 4,800 rpm Removal rate (jointing): max. 4 mm Removal rate (thicknessing): 2 mm Feed speed: 6 m/min Jointing table: 1,380 × 310 mm Thicknessing table: 540 × 306 mm Max. feed height: 235 mm Sliding Table Circular Saw Motor power: 3.8 kW Saw blade Ø: 315 mm Main saw blade speed: 4,500 rpm Cutting width with parallel fence: up to 860 mm Sliding table: approx. 1,260 mm Blade tilt: 90°–45° Spindle Moulder Motor power: 2.8 kW Spindle diameter: 30 mm Working height: 100 mm Speeds: 1,800 / 3,000 / 6,000 / 9,000 rpm Mortising Machine Drill chuck: 16 mm Drill stroke: 140 mm Table size: 500 × 210 mm Max. workpiece length: 1,250 mm Equipment Spindle Moulder Jointer and Thicknesser Mortising Machine Sliding table Angle and parallel fence Compact multi-function machine for space-saving work Transportation possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, Planer/thicknesser, SCM FS 520 7/26. Iodpezu Ahkofx Achstk

Condition: used, Year of construction: 2022, Working width: 410 mm Planer head: Tersa Number of knives: 4 Jointer table length: 2000 mm Adjustable jointer fence angle: yes, 45° to 90° Maximum material thickness for thicknesser: 250 mm Thickness table height adjustment: electric Iedpfx Acegqwxushotk Indication of planing thickness: mechanical digital display Feed rate: 6 m/min Infeed roller: steel Outfeed roller: steel Table rollers: no Motor power: 4.5 kW Motor brake: yes, automatic Dust extraction port: 120 mm Machine length: 2000 mm Machine width: 882 mm Weight: 615 kg

Condition: new, Year of construction: 2024, The PLANTER 610 jointer/thicknesser is equipped with a digital drive for adjusting the height of the thicknesser table, allowing for precise adjustment with 10 programmable positions. Key benefits: - No switching between functions – immediate transition between jointing and thicknessing. - Advanced digital control – easy adjustment of the thicknesser table height for repeatable and accurate results. - Powerful 10 HP motor (model 610). - High blade speed – 5000 revolutions per minute for clean and smooth cuts. - Efficient chip extraction system – 150 mm outlet diameter for dust extraction. - Stable work surface – the thicknesser table with dimensions of 630 x 1600 mm provides optimal support during processing. - Variable feed rate of 8–18 m/min – adjustable feed speed for complete control over the processing. - Efficient thicknessing system – the table with two rollers (0–0.5 mm) ensures smooth material feed. - Rubber discharge roller – ensures even discharge of the workpiece without surface damage. With its robust design, advanced technology, and ease of use, the PLANTER 610 is the ideal choice for professional woodworking shops that require precision, speed, and reliability in wood processing. Technical specifications: Jointer: - Working width 630 mm - Total length of jointer tables 2500 mm - High-speed cutter head (5000 rpm) - Jointer weight (0–45°) - Motor power – 10 HP - 150 mm diameter dust extraction connection Thicknesser: - Working width 630 mm - Thicknesser table dimensions 630 x 1600 mm - Variable feed rate 8–18 m/min - Minimum processing height 5 mm - Maximum processing height 250 mm Itsdozrgr Uspfx Achek - Table with two rollers - Electronic table height adjustment - Rubber discharge roller

Condition: good (used), For sale is a used Hammer A3-31 surface planer and thicknesser with a planing length of 1380 mm. The machine is in good condition and has been inspected and refurbished by our service team. Itsdpezil E Uofx Achek Technical data: - 3-knife cutterhead - Planing width 310 mm - Planing length 1380 mm - Max. workpiece height 230 mm - Dust extraction port Ø 120 mm - Motor power 3 kW / 4.1 HP - Year of manufacture 2010 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: Planer, thicknesser, planing machine, surfacing, thicknessing Reference: R-S255D

Condition: good (used), For sale is a robust, industrial-grade single-sided planer (thicknesser) of the DSMB-63 type, manufactured by the legendary Polish company – JAROMA. This machine is an absolute classic in professional woodworking. It features a massive construction that dampens all vibrations, ensuring the highest precision in processing. ⚙️ DETAILED TECHNICAL SPECIFICATIONS: Working width (cutterhead width): 630 mm. Maximum thickness of the workpiece: from 240 mm to 250 mm. Main motor power: 5.5 kW. Type of planing cutterhead: 4-knife. Cutterhead diameter: 125 mm. Cutterhead speed: 6000 rpm, resulting in a perfectly smooth surface after processing. Feed speeds: The machine has four feed speed options: 7, 10, 14, and 20 m/min. Thickness adjustment: Equipped with a convenient, electric height adjustment for the table. Lower table: Equipped with adjustable roller supports, which facilitate smooth sliding, especially with wet or heavy wood. Machine weight: Stability is guaranteed by a substantial weight of approximately 1060 kg. 🛠️ GREATEST ADVANTAGES OF THE MACHINE: Armored, Polish quality: The heavy casting and compact construction ensure that Jaroma machines are practically maintenance-free and last for decades. High performance: A planing width of 63 cm combined with a powerful motor (5.5 kW) allows for efficient processing of heavy lumber, wide panels, and beams. Itedjzp Aapopfx Achjk Precision: The large cutterhead diameter and high speed minimize the risk of splintering or tear-out in the wood. 📍 ADDITIONAL INFORMATION: The machine is of Polish origin (Jarociński Zakład Przemysłu Maszynowego Leśnictwa). Condition: Used, in full working order. The equipment can be viewed on-site.

Condition: excellent (used), For sale is a used Hammer A3-41 Silent Power surface planer and thicknesser with a jointer length of 1800 mm. The machine has been checked by our specialized staff and is in very good condition. Technical data: - Silentpower spiral cutterhead - Planing width 410 mm - Jointer length 1800 mm - Max. clearance 230 mm - Motor power 4 kW / 5.4 HP - Suction connection Ø 120 mm - Year of manufacture 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Itodpfxewqq Dhe Achjk Related terms: jointer, thickness planer, planer, jointing, thickness Reference: R-A0117

Condition: like new (used), Year of construction: 2023, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been checked by our specialist staff and is in mint condition. Technical data: - 3 system knife planer shaft - Planing width 410 mm - Planing length 1800 mm - Max. passage 230 mm - Motor power 4 kW / 5.4 HP Itjdpjv Dah Djfx Achsk - Extractable Ø 120 mm - Year of manufacture 2023 - Mint condition The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: planer, thicknesser, planing machine, planing, thicknessing Reference: R-A0117-1

Condition: excellent (used), Year of construction: 2022, For sale is a used Hammer A3-31 planer-thicknesser with a planing width of 310 mm. The machine is in very good condition and has been reconditioned and checked by our specialist staff. (Fully functional) Technical data: - Planer-thickness width 310 mm - 3 knife shafts (reversible knives) - Thickness height 4-225 mm Itsdpfx Ajv Ianxjchsk - Dual foldable planer tables - Pivoting planer stop - 2.9 kW / 4 HP motor / 400 volts - Year of manufacture 2022 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: planer, thicknesser, planing machine, planing, thicknessing Reference: R-AT0YY

Condition: ready for operation (used), functionality: fully functional, Kupfermühle KH 30 4-Sided Planer with additional unit: horizontal working spindle with outfeed unit 4-Sided Universal Planing Machine KUPFERMÜHLE Electrical system: 400 Volt / 50 Hz ...../58.5 kW Original paint in reseda green RAL 6011 Motor power and configuration (kW): bottom 7.5 / top 11.0 / vertical right 7.5 / vertical left 11.0 5th spindle (bottom): 11.0 / feed 7.5 / thicknesser 3.0 Feed speed min/max: 5 – 30 m/min Working spindles: 5 units Extraction/Chip collection connectors: bottom 200 / top 200 / right 160 / left 160 mm / bottom 140 mm Working width min/max: 30 mm / 310 mm Working height min/max (2-sided): 15 mm / 300 mm Working height min/max (4-sided): 15 mm / 180 mm (OPTION: 250 or 300 mm) Key features: – Constant table height – Right-side guide fence Iedpsx Ehfcsfx Achjtk – Interchangeable planer heads – Jointing device below and above – Slotted, replaceable tables for noise reduction – Outfeed unit with 2 driven rollers on top and double-guided upper section – Height adjustment synchronized with base machine Machine delivered in refurbished and tested condition, with functional warranty Further options: – New paintwork – Repainting – General overhaul etc. etc.

Condition: new, Description:Vacomat 140/160 XPe- The Vacomat 140/160 XPe mobile dust extractor is our smallest model and ideal for single machine extraction. Air volumes of up to 1,593 m³/h can be conveyed with this extraction system using the vacuum method,e.g. for dedusting sliding table saws, jointers or thicknessers.- In the standard version, extraction is started manually at the push of a button. On request, an automatic start of the fan can be installed when the connected processing machine is switched on,so that the extraction system is not forgotten or unnecessarily operated in idle mode.- The dust and chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container.- The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure load cell and ensures maximum operational filter cleaning system- In the Vacomat 140/160 XPe, an integrated control cabinet ensures that the filter bags are cleaned electro-mechanically via a vibrator motor.- The control system is activated by querying the woodworking machine using potential-free contacts. As soon as all connected machines are switched off, the motorized filter shaking starts automaticallyNo connection to compressed air and therefore no compressor is required for this regeneration mechanism. This results in a significant reduction in the noise level during cleaning.- An efficient pressure shock cleaning system (XPe-D) is available as an option, especially recommended for very high and particularly fine dust content (ATTENTION: overall height then 100 mm and length 280 mm).Cleaning via the compressed air tank takes place offline, after extraction UKOCONE FILTER- The Vacomat 140/160 XPe mobile dust extractor is equipped with patented SchukoCone® filter bags as standard.- The SchukoCone® filters are a successful combination of an externally loaded filter bag with an internally loaded cone. This innovative filter design offers approx. 60 % more filter surface area with a smaller surface area requirement.- SchukoCone® filter bags unfold their enormous potential particularly with fine dusts, where a large filter surface area and low filter surface load must be ensured.- By reducing the filter surface load, a longer service life of the filter is achieved. If the filter resistance is low, less fan power and therefore less electricity is EMBLY Itsdpfx Aovwflnjchjk

Condition: excellent (used), Year of construction: 2016, For sale is a used Felder planing machine, model AD5-31, with a planing and thicknessing width of 310 mm. The machine is in very good condition and has been refurbished and inspected by our qualified technicians. (fully functional) Technical data: - Planing and thicknessing width 310 mm - Silent Power planing cutterhead - Adjustable planing fence, swiveling 90 - 45° - Thicknessing height 4 - 225 mm - Thickness adjustment with handwheel - 5.5 HP (4 kW) motor The planing machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Iedpjzltkwofx Achotk Related terms: Planing machine, thicknesser, thickness, Felder Reference: R-N1194

Condition: good (used), For sale is a used TOP MASTER planing machine FS 350 with a planing and thicknessing width of 350 mm. The machine is in good condition and has been refurbished and inspected by our qualified personnel. (fully functional) Technical data: - Planing and thicknessing width 350 mm - 3 knife shaft (strip knives) - Planing table length 1800 mm - Thicknessing height 200 mm - Planing table flaps Itsdpfozltigox Achsk - Drilling support - dust extraction possible The planing machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planing machine, thicknesser, thickness, Felder Reference: R-N3011

Condition: excellent (used), Year of construction: 2018, For sale is a used Hammer planer machine A3-31 with a planing and thicknessing width of 310 mm. The machine is in very good condition and has been refurbished and inspected by our qualified technicians. (fully functional) Technical data: - Planing and thicknessing width 310 mm - 3 cutterblocks (reversible cutter system) - Planing fence swiveling 90-45° - Planing table, dual folding - Thicknessing height 4-225 mm - 4 HP (3kW) motor, 400 volts The planer machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planer machine, thicknesser, thickness, Felder Reference: R-A33HG Itodjzlthvjpfx Achek

Condition: good (used), Year of construction: 2001, cutting height (max.): 240 mm, cutting width (max.): 410 mm, Surface planer and thicknesser GRIGGIO FS 410 Year of manufacture: 2001 Iodpfxey S E Uks Achotk Planing width: 410 mm Thicknessing height: 9-240 mm Spindle speed: 5000 rpm Footprint: 2100 x 1500 mm Immediately available

Condition: new, Multi-function machine with aluminum sliding table for sawing, milling, planing/thicknessing, and optional long-hole drilling. torsion-resistant, steel-cast iron construction machine table made of cast iron, hardened and ground smooth-running, anodized aluminum sliding table, 10-year SCM warranty on wear of the slide guides large fence system with extendable aluminum telescopic stop and folding stops with combination saw-tenon stop with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, swiveling from 90°-45° helical steel infeed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit sliding table with ball contact system equipped with a ball contact system that has proven its worth millions of times permanently smooth running due to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and trapezoidal rail Itodeiiyppopfx Achok The dust extraction ports for the planer and thicknesser are on the same – right – side. The dust extraction hose can therefore be used for both types of planers from the same side. helical steel infeed rollers for a constant and even workpiece feed massive anti-recoil guards for the operator's safety 3-knife cutterhead ensures an optimal planing result Fencing length 1600 mm max. saw blade diameter with scoring unit 315 mm max. cutting height at 90° / 45° 100/79 mm max. crosscut width to the left of the saw blade 1660 mm cutting width on the parallel stop 800 mm saw blade speed 3500 rpm saw blade tilt 90° - 45° Working width 300 mm planer table length 1260 mm planer shaft diameter / number of planing knives 72 mm / 3 pcs. Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm feed rate 7 m/min Milling spindle diameter 30 mm Useful length of milling spindle 100 mm max. tool diameter 180 mm, can be countersunk Spindle speed 3500/600/800 rpm Motor power 3 x 4 kW, 400 V, 50 Hz Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Weight 430 kg OPTIONS: - Professional stops EUR 300.— Saw stop with quick-release lock and micrometric adjustment Planer stop with 90° ÷ 45° with continuous adjustment - Scoring unit incl. saw blade EUR 292.— - Handwheel with numerical display for thickness table positioning EUR 129.— - Feed device EUR 119.— - 2 additional handwheels for unit adjustment EUR 45.— - TERSA cutterhead DM 72 mm EUR 212.— - Xylent spiral cutterhead with 3 rows of knives EUR 717.— - Aluminum long-hole drilling device EUR 390.— - 2 stop flaps on the crosscut fence EUR 150.—

Condition: used, Planer, thicknesser Krummen & Katz 4/26. Itsdpezkruljfx Achsk

Condition: new, Bernardo Planer and Thicknesser ADM 300 – 400 V/ 3.0 kW Technical Specifications Planer Planning width 305 mm Table length 1510 mm Table height 915 mm Cutterhead speed 5500 rpm Number of cutter knives 4 pcs Cutterhead diameter 78 mm Fence 1105 x 155 mm Fence can be swivelled from 90° to 45° Max. chip removal 3 mm Thicknesser Table length 585 mm Planning width 300 mm Minimum/maximum thickness 3 - 220 mm Max. chip removal 3 mm Feed rate 6.6 m/min Dust extraction connection Ø 100 mm Motor output S1 100% 3.0 kW (4.0 hp) Motor input S6 40% 4.2 kW (5.7 hp) Voltage 400 V Machine dimensions (L x W x H) 1700 x 790 x 1080 mm Weight approx. 280 kg Features • Foldable planer table for quick switching to thicknessing • Integrated foldable chip ejection hood - connection diameter 100 mm • Both planer tables with fine adjustment and noise-reducing table lips • Maintenance-free 4-knife cutterhead with cutter knives in HSS-18% quality • Helically toothed infeed roller for safe and even workpiece feed Iedpsd N S U Tefx Achstk • Precise thicknessing thanks to thickness table with central column guidance and support • Laterally guided fence, so the machine can be placed directly against the wall • As standard, with cutter knife setting gauge for optimal adjustment of the cutter knives • Powerful drive motor with high power reserves Scope of delivery • Cutter knives in HSS quality • Cutter knife setting gauge • Integrated chassis • Push stick

Condition: used, Technical specifications: Planer: Max. planing width: 350 mm Cutterhead diameter: 110 mm Number of knives: 3 Table length: 1760 mm Motor power: 2.2 kW Voltage: 380 V Thicknesser: Max. planing width: 350 mm Max. planing height: 230 mm Saw: Max. saw blade diameter: 250 mm Work table with carriage Motor power: 2.2 kW Voltage: 380 V Overhead router: Spindle diameter: 40 mm Manual spindle height adjustment Spindle height: 120 mm Motor power: 2.2 kW Isdpfx Acoziaytohetk Voltage: 380 V Overall dimensions: Length: 2000 mm Width: 1300 mm Height: 1250 mm

Condition: new, Year of construction: 2025, machine/vehicle number: KK00050613, input frequency: 50 Hz, type of input current: three-phase, total length of planing tables: 2,250 mm, overall weight: 695 kg, chip removal: 5 mm, chip removal for surfacing (max.): 5 mm, number of planer blades: 4, planer shaft diameter: 120 mm, planing height: 240 mm, Equipment: motor brake, Holzkraft surfacer and thickness planer minimax fs 52 TERSA, Planing width 520 mm, planing height 3 - 240 mm, Surfacing table length 2,250 mm, Itsdpfoxn Suaex Achjk 4-knife TERSA cutterblock, Motor 7 kW (9.5 HP); S6 5 meter connection cable 2.5 mm² with 16 Ah plug, complete with: simultaneously foldable tables, combined extraction hood for surfacer and thicknesser D = 120 mm, Thickness table adjustment via handwheel with integrated readout, star-delta switch, auxiliary fence, CE and BG - wood dust certified. Order no.: 5503501 Available immediately ex location Seevetal, without transport, subject to prior sale.

Condition: excellent (used), Year of construction: 1980, - saw - moulder Isdpfx Asp Sugfjchjtk - thicknesser planing width 210mm planing height 120mm tool change is done by changing the position of the belt.