Used Table Press for sale (26,481)

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm Kodpfx Asu N Ddwjkpsdu slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel accessory: - foot plate 2200x1500x40mm *

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm Kdodpfx Akovc Awxspsu ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm Ksdpfx Aju N D Rqekpjdu - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250 mm table rotating: 360 ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/U total power requirement: 6 kW Kdjdeu N D Szspfx Akpju weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,82 x 2,25 x 0,92 m Rotary table conventional *

Year of construction: 1989, condition: used, Technical details: Kodpfx Aeu N D R Djkpjdu table length: - mm table width: - mm table load: - t total power requirement: - kw weight of the machine ca.: 8,0 t dimension working table: ca.4,5x3,1x1,2 m TRANSFER TABLE - TRANSFER TROLLEY - TOOL CHANGING SYSTEM Possible application: for press tools/devices as interchangeable trolleys in press lines *

Condition: new, functionality: fully functional, ALZMETALL Alzstar 18-T/S, Manufacturer: Alzmetall Type: Alzstar 18-T/S Condition: New / Demo Machine Drilling capacity in St 60 steel: 18 mm, Thread cutting in St 60 steel: M 12, Thread cutting in GG 20 cast iron: M 14, Short spindle: MK 2, Spindle speed: 225-4,300 rpm, Spindle stroke: 80 mm, Overhang: 190 mm, Column diameter: 65 mm, Machine table - usable surface: 300x240 mm, Number of T-slots - width - spacing: 2 x 12 x 80 mm, Distance spindle-machine table min./max.: 75/357 mm, Machine base - usable surface: 300x240 mm, Number of T-slots - width - spacing: 2 x 12 x 80 mm, Distance spindle-base min./max.: 437/437 mm, Manual feed, Machine table height adjustment: hand crank, Total power requirement: 0.37/0.55 kW, Machine height: 840 mm, Weight: 110 kg Standard equipment: Main switch with motor protection switch, lockable Reversing switch for right and left rotation Speed adjustment, stepless Protection class IP 54 Mushroom push button (self-locking) for EMERGENCY STOP Spindle guard with electrical protection Kedpey S Au Usfx Akpsdu Optional: - LED machine light - Undercarriage - Drill chuck 1-13 or 3-16 Available immediately. For self-collection. Forklift available. Shipping also possible. Errors, changes and prior sale reserved. More Alzmetall bench drills and floor drills constantly in stock!

Condition: good (used), Manufacturer: WMW Type/Model: BT 10 Drilling capacity: up to 16 mm Spindle mount: Drill chuck Speed range: 355 / 710 / 1,000 / 2,000 rpm Table: 600 x 400 mm Overhang: 200 mm Stroke: 100 mm Head height adjustment: Motor speed: 1,400 / 2,780 rpm Kedpoz Tc R Ijfx Akpjdu Power rating: 0.8/1.0 kW Accessories/Equipment: Condition: good Weight: 135 kg Dimensions with base: 470 x 600 x 1,800 mm

Condition: used, Year of construction: 2001, 3 x Trumpf bending machines (hydraulic press brakes): • TrumaBend V50 | Year of manufacture 1997 • TrumaBend V85 | Year of manufacture 1997 • TrumaBend V85 S | Year of manufacture 2001 Condition & Maintenance: Kdsdez Tfmrepfx Akpou As can be seen in the attached images, all machines have been regularly maintained as part of the annual safety inspection (UVV). The last inspection for all units took place in the summer of 2026. The machines are currently still in operation and are fully functional. Inspection & Contact: An on-site inspection is possible on weekdays until 2:00 PM.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Overhang: 305 mm Usable installation height: 440 mm Table height: 800 mm Table width: 90 mm Machine weight (approx.): 9,100 kg Machine height: 2,500 mm Equipment: - CNC control system Cybelec VisiTouch (retrofit 2026) - 2 pcs. support arms - Foot switch - Side protective doors - Laser safety device - Tool holder EHT - Pneumatic die shifting - Crowning - Controlled axes: y1, y2, x, R Kedpfx Akozt R D Dopodu

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 105000, overall weight: 13,000 kg, Inotechno hydraulic press, 100-tonne capacity. Kdedpfsz Tbnxsx Akpeu

Condition: used, Year of construction: 2008, functionality: limited functionality, For sale: 8-color rotogravure printing press, manufactured in 2008, with a printing width of 1050 mm. Kjdpsz Skbtsfx Akpodu

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total width: 1,366 mm, total height: 2,546 mm, total length: 2,013 mm, overall weight: 720 kg, Owrak vertical baling press, like new, manufactured in 09/2025 Specifications: Infeed opening (width): 1003 mm Infeed opening (height): 460 mm Press cycle time: 40 seconds Pressing force: HP: 8 tons (80 kN) LP: 5 tons (50 kN) Bale dimensions (weight): Width: 1,000 mm Depth: 800 mm Height: 1,000 mm Bale weight for cardboard: Up to 150 kg Kodpjz Smd Dofx Akpedu Bale weight for plastic: Up to 190 kg Machine weight: 720 kg Noise level: 62.3 dB(A) Protection class: IP55 Power supply: Single-phase, 230 V, 50 Hz, 10 A An inspection can be arranged at any time. Transportation can be organized for an additional fee.

Year of construction: 1974, condition: used, Offered are two Weingarten single-column eccentric presses. 1) Weingarten AR 125 single-column eccentric press, delivered: 1970, pressing force: 125t, max. sheet thickness: 13mm, stroke rate: 44/66strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. 2) Weingarten AR 125 single-column eccentric press, delivered: 1974, pressing force: 125t, stroke rate: 42/62strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. Inspection possible by arrangement. Kedsz S Iupspfx Akpsdu

Condition: good (used), Year of construction: 2011, machine/vehicle number: B0702A0516, functionality: fully functional, TRUMPF TruBend 7036 – CNC Press Brake – Year of manufacture 2011 – Extensive equipment Machine data Feature Description Manufacturer TRUMPF Model TruBend 7036 Year of manufacture 2011 Machine type CNC Press Brake Press force 360 kN (36 t) Bending length 1,020 mm Control system TRUMPF TASC 6000 Back gauge 6 axes Machine no. B0702A0516 Connection 400 V / 50 Hz Location Germany Description Kodpfx Akez S N Ecopedu For sale is a TRUMPF TruBend 7036 from the year 2011 with extensive special equipment. The TruBend 7036 is a compact, high-precision CNC press brake that is particularly suitable for the economical processing of small and medium-sized sheet metal parts. Thanks to the electromechanical direct drive and the ergonomic design, the machine is ideal for precise and efficient bending operations. Equipment and special options Machine and control system - TRUMPF TASC 6000 CNC control system - 15-inch touchscreen - Graphical workshop programming - Electromechanical direct drive (torque motor) - High-precision length measuring system - 6-axis back gauge system - Bending line laser - BendGuard safety system (block laser) - Automatic tool clamping - Operating data acquisition - Work area lighting at the front and rear (LED) Ergonomics package - Comfort support table - Comfort footrest - Swiveling control unit - Seat and standing aid - Storage consoles - Document holders Productivity Plus Package - Graphical workshop programming - Automatic tool clamping - BendGuard (block laser) Extensive accessories Additional information The machine was originally ordered with extensive special equipment and is particularly suitable for: - Fine sheet metal processing - Precision bent parts - Small series production - Prototype construction - Complex bent parts For sale due to business closure.

Condition: excellent (used), Year of construction: 2008, Mossini press Servo drive Pressing force 2,000 kN Stroke adjustment 20 - 100 mm Stroke rate 30 - 90 strokes/min Ram adjustment 100 mm Tool installation height 455 mm Year of manufacture 2008 Kdjdpfez Sz Sbjx Akpou Includes Kohler conveyor system.

Condition: new, Year of construction: 2026, pressing force: 60 t, DURENDUS 60 T Workshop Press – Single-Column Press – 900 mm clear width, 400 mm stroke The machine shown here has already been built and delivered for a customer order. We can supply this machine from stock or manufacture it new – we will gladly take individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (on request): The listed options are based on realized customer projects and enable a targeted adaptation of the machine to the respective application. The basic machine represents a functional standard version – in practice, it is usually expanded with additional equipment and configured accordingly for the specific project. Tabletop with X-shaped T-slot 600 × 900 × 30 mm Pressure adjustment Lateral displacement of the press ram (600 mm) Bending tool Torque-resistant cylinder with manual stroke adjustment V-profile straightening bolster in combination with tabletop LED lighting Foot switch Cooling ===== Technical data + information: ==== General information Design: Workshop press Press force: 60 t (optional adjustable) Total weight: approx. 750 kg Overall dimensions (W × D × H): 1,400 × 900 × 2,450 mm ==== Working area Clear width: 900 mm Open depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 900 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 150 mm Piston rod: Ø 95 mm Height adjustment: via chain mechanism ==== Speeds No-load speed: 8 mm/s Return speed: 13.4 mm/s ==== Hydraulics & Drive Kdjdpoy Hi D Eefx Akpsu Pump output: 8.5 l/min Motor power: 2.2 kW Hydraulic tank: 22 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connection power: approx. 2.5 kW ==== Equipment Height-adjustable crossbeams with pin locking Chain mechanism for table adjustment Manometer for pressure indication Emergency stop switch CE certification Two-layer paint finish according to RAL ===== Pressing, removing, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive, as well as European Machinery Directive (Directive 2006/42/EC), the EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the design and manufacture of special machines and the automation of presses. We distribute customized hydraulic presses at surprisingly favorable prices. The hydraulics of the presses mainly use components from leading European manufacturers.

Condition: new, Year of construction: 2026, pressing force: 400 t, DURENDUS 400 T Workshop Press – Single-Column Press – 1,600 mm clear width, 550 mm stroke The machine shown here has already been built and delivered to a customer. We can manufacture this machine for you very quickly – and are happy to consider individual options. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (on request): The options listed are based on realized customer projects and enable targeted adaptation of the machine to the specific application. The basic machine represents a functional standard design – in practice, it is usually expanded with additional equipment and configured according to the specific project requirements. * Tabletop with X-shaped T-slot 800 × 1,200 × 120 mm * Pressure adjustment * Lateral displacement of the press ram (1,000 mm) * Bending tool * Twist-proof cylinder with manual stroke adjustment * V-profile straightening support in combination with the tabletop * LED lighting * Foot switch * Cooling ===== Technical data + information: ==== General information * Design: Workshop press * Press force: 400 t (optionally adjustable) * Total weight: approx. 4,000 kg * Overall dimensions (W × D × H): 2,950 × 1,100 × 2,850 mm ==== Working area * Clear width: 1,600 mm * Open depth: 550 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Crossbeam usable width: 1,600 / 600 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 360 mm * Piston rod: Ø 235 mm * Height adjustment: via chain mechanism ==== Speeds Kdodpfxoy H Dn Ee Akpju * No-load speed: 7.8 mm/s * Return speed: 13.7 mm/s ==== Hydraulics & Drive * Pump capacity: 48 l/min * Motor power: 22 kW * Hydraulic tank: 120 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Hand lever operation * Manual fine adjustment via hand lever * Connection: 400 V / 50 Hz * Total connected power: approx. 23 kW ==== Equipment * Height-adjustable crossbeams with bolt locking * Chain mechanism for table adjustment * Pressure gauge for pressure indication * Emergency stop switch * CE certification * Two-layer coating according to RAL ===== Pressing, unpressing, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives and European Machinery Directives (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all aspects of the national Brazilian safety guideline NR 12, which is based on these. Our strength lies in the construction of special machines and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. The hydraulics of the presses mainly use components from leading European manufacturers.

Condition: used, Münch RMP 660 pellet press for the production of wood pellets and biomass pellets from sawdust, wood shavings and other organic waste materials. The machine is suitable for industrial pellet production, offering high pressing capacity and consistent pellet quality. Ideal for wood processors, sawmills and biomass plants. Technical data: - Screen: 6 mm - Motor: 2 x 90 kW - Inner diameter of die: approx. 660 mm - Number of press rollers: 2 Ksdpfozryyrsx Akpedu - Pressing capacity: up to approx. 3–5 t/h

Condition: used, This Gechter pneumatic press, type: 56 kN LP-ZS 4, will be auctioned off online as part of our industrial auction / machine auction BZB Behinderten-Zentrum-Boxdorf – including a metal circular saw, office furniture, and a three-wheeled tandem bike, as well as lighting fixtures. You can find this and many other items on our platform. Kdjdpoz Sylmjfx Akpou

Condition: like new (used), Year of construction: 2019, Mossini Transfer Press PDM/4BLD Pressing force: 2,000 kN Table area: 6,000 x 2,500 mm Slide area: 6,000 x 2,500 mm Stroke height: 900 mm Strokes per minute: 10 - 25 1/min Slide adjustment: 400 mm Overall height: 1,270 mm TOTAL STROKES: 1,000,000 strokes NORDA Transfer X-axis travel: 0 - 1,200 mm Kdsdpfx Aksz Szrzjpou Y-axis travel: 0 - 1,125 mm Z-axis travel: 350 mm Max. transport weight: 200 kg Mill tool strip system Strip width max. up to 1,850 mm Strip thickness: 0.5 - 3.0 mm Coil load capacity: 24,000 kg

Condition: used, Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Kedjzryy Sopfx Akpjdu Technical data: - Cylinders: 6 - Hold-down units: 3 - Pressing area: 260 x 145 cm

Condition: good (used), Year of construction: 1991, machine/vehicle number: P 10106, Offer 26338 Kdjdpfxoz R Rkfj Akpou Technical data: - Max. working length: 3340 mm - Stand opening: 2600 mm - Max. pressing force: 100 t - Overhang: 400 mm - Max. stroke: 100 mm - Max. installation height: 370 mm - Table height (approx.): 960 mm - Approach speed / rapid traverse: 85 mm/s - Pressing speed: 10 mm/s - Retraction speed: 80 mm/s - Drive power: 9.5 kW - Space requirement (approx.): W 3500 x H 2350 x D 1950 mm - Weight (approx.): 6.8 t - Including: - CNC control system DELEM DA 58 - Rear stop 0 - 600 mm

Condition: used, total length: 1,500 mm, total width: 1,150 mm, total height: 2,400 mm, Year of manufacture: 2014 Weight: 3.600 kg - Year: 2014 Kdodpfexapftox Akpou - Documentation available: Yes - CE marking present: Yes - Serial number: 441 - Power [kW]: 3.0 - Press force [ton]: 28 - Max. working width [mm]: 1000 - Column gap [mm]: 950 - Throat depth [mm]: 220 - Backgauge depth [mm]: 415 - Transport dimensions: 1500mm x 1150mm x 2400mm (l x w x h) - Transport weight [kg]: 3600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1993, Pressing area: 2200 x 1100 mm. Plates are gold-anodized and fitted with a safety retaining cord. Connection value: 6 kW. Nominal volume: 140 l. Permissible operating pressure: 6 bar. Nominal operating current: 15 amps. Permissible operating temperature: 100° C. Storage location: Nattheim. Kodpfx Akjz Ng Sbopjdu

Condition: used, Year of construction: 2024, New machine – special price – year of manufacture 2024. HAND GUARD Edition Single Flex, unit. Image included. The HAND GUARD system is based on the early detection of a hazardous situation and thus protects the user from injuries. It functions in every camera-based system and initially warns the user visually to indicate an impending danger. If the danger persists, the saw blade is lowered without damaging the machine or the material. HAND GUARD supports the processing of various materials, such as wood, metal, and plastic. • Contactless and injury-free • Quick start-up • 100% damage-free • Works with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter, fully retractable under a single-sided pivoting saw unit. Pivoting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and pivoting adjustment and a maximum saw blade overhang of 179 mm. (Partial installation of the scoring unit required). In addition, there is the control unit at eye level, with which you can adjust the height and pivoting of the saw blade, plus, depending on the choice of the control package, the speed and other functions. The new, clear industrial design marks the exceptional position of the Altendorf brand: In this panel saw, distinctive design meets timeless aesthetics. The Altendorf double carriage is famous for its smooth running and precise movement. It can be locked steplessly at any position. The large double rollers keep the upper carriage in absolute connection with the lower carriage in the respective guide rods. This running quality is maintained even under decades of stress and contamination. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-chamber system. In addition, there is a front support roller with a width of 300 mm, which provides helpful support when cutting long workpieces on the parallel fence. Positionable 90° under the double carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction on the parallel and mitre fence when pivoting the saw unit • Stepless fine adjustment of the axes via +/# buttons • Easy calibration of the axis • Machine diagnostics, operating hour counter, USB interface • Calling up the last dimension input (back function) • Conversion from peak to butt dimension on the parallel and mitre fence • Shift-cut function with automatic determination of missing angles or dimensions • Extended tool management for max. 100 storable tools • Storage of the scoring position (3-axis scoring unit) Kedeyyap Ejpfx Akpsdu • Storage of the thickness and cutting width of the main tool • Storage of the speed of the main tool Additional functions: • Grooving: with automatic step-by-step positioning of the parallel fence • Chain dimension function: cutting sequences with the same distance on the parallel fence • Miter cut with allowance • Calculator function with result transfer to the axes • Geometric shapes, determination of missing angles or dimensions • Bevel cuts, determination of missing angles or dimensions • 9999 storable cutting programs • Standard preparation for remote maintenance • Template holder directly next to the touchscreen Accessories included in the Edition Single Flex: • Double carriage with a carriage length of 3000 mm • Vario drive 5.5 kW (7.5 hp) VAR