Used Table Press for sale (26,219)

Year of construction: 2021, condition: excellent (used), functionality: fully functional, 1 x Zumex cold-press commercial juicer. Complete with juice bags, alternative blades and all the necessary accessories. Suitable for soft fruit, hard fruit, vegetable greens or a mix of those three products. Model - MASTERY. Serial number - 473562. Date of manufacture - 2021. The Mastery represents Zumex’s cold press commercial system for all types of fruit and vegetable juices, leading the way with its crushing efficiency and power, thanks to its shredder discs and its Brushless motor. It also has a 11-ton press, which is more compact than any other press of its category to obtain quality juice. Production capacity - from 30 L/h up to 110 L/H. Deposit capacity - 3 litres. Touch Control Display - 4.3" Colour. Djdpjyh I Tkefx Adyoup Pression Power - 11,000 kg. Electrical requirements - 220-240 V / 50 hz / 1 phase.

Condition: used, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm daylight 350 mm table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3 and 4, up to Ø 39.5 mm Quick-change device for punches 3 and 6 up to Ø 39.5 mm Peddinghaus blue series Dodpfxoyrhyue Adyjup with material support table no. 513, dimensions 630 x 535 mm

Condition: used, Year of construction: 2006, Meulenbroek LPC20L Available for sale or rental. Price is the monthly rental rate. Can be painted in company colours. Djdjyrrucjpfx Adyjup Technically in good condition!

Condition: excellent (used), Year of construction: 2019, operating hours: 433 h, functionality: fully functional, Vertical baler HSM V-Press 860 plus, year of manufacture 2019 Technical specifications: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2019 Operating hours: 433 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time (idle): 25 s Theoretical press capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: Film, paper, cardboard, punching waste, textiles, big bags, polystyrene Remarks: The baler is in very good condition. Please note: Dusdpfx Aoyrngnjdyjp All technical specifications are based on the manufacturer's information. We accept no liability for the accuracy of the data provided or for any errors. Offers are subject to change, prior sale reserved and may be withdrawn at any time. Inspection by appointment possible. The sale is ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: excellent (used), Year of construction: 2019, operating hours: 311 h, functionality: fully functional, Vertical baler HSM V-Press 860 plus, year of manufacture 2019 Technical specifications: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2019 Operating hours: 311 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Djdpfeyrnfkjx Adysup Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theoretical cycle time (idle): 25 s Theoretical output: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: film, paper, cardboard, punching waste, textiles, big bags, styrofoam Note: The press is in very good condition. Please note: All technical data is based on information provided by the manufacturer. We do not assume any liability for the information given or for any possible errors. All offers are non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by arrangement. The sale is ex-location, without warranty or guarantee. Our payment terms: 100% advance payment.

Condition: good (used), Year of construction: 1974, Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Manufacturer: NEHER, manual spindle press type SPPG-40/100 -Pressure: max. 40,000 kg -Stroke: 600 mm -Intermediate dimension: 715 mm -Spindle mount: Ø 40 mm -Table size: 1100 x 600 mm, groove width mm -Table bore: Ø 120 mm -Dimensions: 1800/1800/H2400 mm Dujdpfx Adsypvtksyop -Weight: 1940 kg

Condition: excellent (used), Optimax TAS200 semi auto table strapper Djdpfx Asix Iuxjdyoup adjustable table height, Braking swivel castors, external manual strap tension adjustment

Condition: good (used), Year of construction: 2008, load capacity: 1,000 kg, lifting height: 800 mm, fuel type: electric, empty load weight: 135 kg, MULTIPLE UNITS IN STOCK This semi-electric scissor lift from 2008 by BT is in good condition; The stacker is manually operated and lifts fully electrically; The stacker has a capacity of 1,000 kg; Lifts up to a height of 800 mm; Ideal to use as a workbench! The 2 x 12 volt batteries come with an INTERNAL charger; Order the scissor lift through our webshop or schedule a test drive; Video coming soon. Dodsx Hpndopfx Adyoup

Condition: excellent (used), Year of construction: 2019, operating hours: 119 h, functionality: fully functional, Vertical baler HSM V-Press 860 plus B, year of manufacture 2019 Technical data: Manufacturer: HSM Model: V-Press 860 plus B Year of manufacture: 2019 Operating hours: 119 Pressing force: 60 t Drive power: 4 kW Filling opening: 1500 x 651 mm Filling height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Bale weight: 550 kg Tying: Manual Theoretical cycle time (idle): 25 s Theoretical press performance: 32.5 cbm/h Dusdpfx Ajyrfl Isdysp Dimensions: 2099 x 1245 x 2985 mm (W x D x H) Weight: 2340 kg Materials: film, paper, cardboard Note: The baler is in very good condition. Please note: All technical data is based on the manufacturer's specifications. We do not assume any liability for the information provided or possible errors. All offers are subject to change, prior sale reserved, and may be withdrawn at any time. Inspections by appointment only. The sale is ex location, without warranty or guarantee. Our payment term is 100% advance payment.

Condition: good (used), Year of construction: 2012, The pre-shredder (upper section) is not included in the offer. Only the lower part is offered. Dodsyrt T Topfx Adysup Paper baler / baling press PRESTO CC 40 V Manufacturer: PRESTO GmbH & Co. KG Machine type: CC 40 V Machine number: 28074 Year of manufacture: 2012 Empty weight: 4,200 kg Max. operating pressure: 260 bar Protection class: IP55 Rated current: 30 A Rated voltage: 400 V, 50 Hz Rated output: 15 kW Electrical connection: 35 A gG Machine type: horizontal baling press for paper and cardboard

Condition: good (used), functionality: fully functional, Year of construction: 2008, Servo-electric press brake Make: TRUMPF Model: TruBend 7036 Year of manufacture: 2008 Technical Data Manufacturer: TRUMPF Model: TruBend 7036 Year built: 2008 Press force: 36 t Bending length: 1020 mm Working height approx.: 1150 mm Space required: 1805 x 1330 x 2380 mm Weight: 2,600 kg Standard Equipment - Rigid machine frame - Press beam - High-dynamic, electronic direct drive (torque motor) - Inductive length measuring system with temperature compensation - Switch cabinet air conditioning - Ergonomic machine design Duodsyr Nckopfx Adyep Optional Equipment - Tool clamping (Wila) top and bottom - Integrated TRUMPF TASC 6000 control - Safety light curtain at front - Backgauge system: 6 axes: X1, X2, R1, R2, Z1, Z2 - Comfort support table - BendGuard (with block laser) Safety - Side-swiveling safety doors - Protective rear cover - 2-button foot switch for standing and seated operation - CE marking Tooling - Lower tool EV/S-W10, V10/84°/R1, H 100 mm, L = 1000 mm, segmented - Upper tool OW200/K, offset, 86°/R1, H 100 mm, L = 1000 mm, segmented All information subject to change. A powered demonstration is always possible in our showroom.

Condition: good (used), Year of construction: 2003, Double scissor lift table, lift table with double scissor mechanism, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: KAISER KRAFT, Scissor lift table type M2000 Dedpfx Ajyn Rffjdyeup -Load capacity: 2000 kg -Platform: 1000 x 2000 mm -Dimension when retracted: Height 805 mm (without feet) -Extended dimension: Height 3400 mm -Transport dimensions: 1000/2000/H1050 mm -Empty weight: 1245 kg

Condition: used, Year of construction: 1981, total height: 2,300 mm, total width: 1,100 mm, total length: 2,000 mm, Empty weight: 500 kg Price: On request - Year: 1981 - Documentation available: No Dedpjxhcgyjfx Adyjup - CE certificate present: No - Press force [ton]: 63 - Throat depth [mm]: 250 - Transport dimensions: 2000mm x 1100mm x 2300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2011, total length: 4,800 mm, total width: 1,800 mm, total height: 2,250 mm, Weight: 8.200 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 91898 - Drive system: CNC - Control system brand: HACO - Control system type: ATL 565 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 100 - Max. working width [mm]: 3600 - Column gap [mm]: 3300 - Throat depth [mm]: 250 - Backgauge depth [mm]: 600 - Max. stroke [mm]: 120 - Crowning system: Mechanical - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes Dujdpfx Adsymlaboyjp - Transport dimensions: 4800mm x 1800mm x 2250mm (l x w x h) - Transport weight [kg]: 8200kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2020, Equipment: safety light barrier, CNC ESA, 3 axes Y1 Y2 X and manual R, manual table crowning, table for crushed bend, DSP LASER, year 2020 Duodpfxsyanl Hj Adyep

Year of construction: 2015, condition: ready for operation (used), This TELSONIC TelsoSPlice TS3-6 P3.6 wire welding sytem was manufactured in 2015. It features a 15" SVGA touch screen, a pneumatic unit, and a 3.6kW WeldHead. The machine includes a barcode scanner, keyboard, and a spacious 2000 x 1000 mm table. Consider the opportunity to buy this TELSONIC TelsoSPlice TS3-6 P3.6 Table. Contact us for more information about this machine. • System: TelsoSplice Plus • Technology: Ultrasonic wire splicing / wire compaction • Application: Ultrasonic welding of wire strands for splice production and compaction • Material Capability: Bare copper wires • Restriction: Wires must not be tinned • Plastic Welding Capability: Not suitable for plastic welding • Total Welding Counter: 1490 welds • Recorded Welds / Compactions: approx. 490 • Ultrasonic Frequency: 20 kHz • Ultrasonic Power (Welding Tongs): 3 kW • Generator Power: 3.6 kW • Amplitude Accuracy: Stabilized ±3 % • Wire Cross Section Range: 0.26 mm² – 40 mm² • Cylinder Force at 6 bar: 1750 N • Cylinder Force at 7 bar: 2040 N • Insertion Stroke (Opening): 19 mm / 10.5 mm • Maximum Tool Torque: 20 Nm • Maximum Air Supply Pressure: 10 bar • Maximum Operating Pressure: 7 bar • Compressed Air Quality: ISO 8573-1:2010 [2:3:2] • Pneumatic Connection: Pneumatic hose Ø8 mm • Voltage Supply: 3 × 400 V / 230 V • Power Supply Type: 3LNPE • Frequency: 50 – 60 Hz • Nominal Current: 3.3 A • Maximum Peak Current: 6.0 A eff Dsdpfx Ajx D E A Ajdyjup • Power Factor: cos φ > 0.95 • Minimum Line Protection: 3 × 13 A slow-blow • Protection Class: IP20 • Control System: SPC Module-4 • Operating System: Windows Embedded Standard 7 • Touch Panel PC: 15" SVGA Touchscreen • TelsoSplice Software Version: 3.5 • Version: 3.5.50929 • Microsoft Framework Version: 4.0.30319.34209 • Ultrasonic Generator: MAG • Generator Output Power: 3.6 kW • Weld Head: TS3-6 • Power Cable: 3 × 400 V / 230 V MAG/SPC-4 • Power Cable Length: 3 m • Pneumatic Unit: TelsoSplice TS • Adapter / Power Cable: MAG/SPC-4 • Rack Housing: 19" 8U • Emergency Stop: TelsoSplice Table E-Stop • Foot Switch: TelsoSplice Foot Switch • Barcode Scanner: Manhattan CCD Long-Range • Keyboard: US Layout • Key Set: TelsoSplice Key Set • Cable Set: TelsoSplice Table / Standing Version • Machine Table: TelsoSplice Table L • Table Size: 2000 × 1000 mm • Complete System Weight (Table Version): approx. 103 kg • Operating Temperature Range: 10 °C – 40 °C • Humidity Range: 20 % – 80 % (non-condensing)

Condition: ready for operation (used), Year of construction: 1998, This WILD door leaf press line was manufactured in 1998. It is designed for door production, handling dimensions from 1,800 to 2,300 mm in length, 500 to 1,300 mm in width, and thicknesses of 35, 40, and 44 mm. The line includes areas for gluing, pressing, and handling door panels with advanced feeding and transfer systems. If you are looking to get high-quality door production capabilities consider the WILD door leaf press line we have for sale. Contact us for more information. Machine Benefits Dujdpfxsyaqmge Adyop Technical Machine Benefits • Dimensions for door production: lengths: 1800 - 2300 mm • Dimensions for door production: widths: 500 - 1300 mm • Dimensions for door production: thicknesses: 35 / 40 / 44 mm Extra Information Consisting of the following areas: Endless door panel gluing with frame laying station Press line with hard fiberboard loading station First area consists of: Portal feeding Angle transfer with rip and cross cut saw Feeding and supply of longitudinal and cross frame parts from magazines Longitudinal cross-cut station for the longitudinal frame parts Connecting station for the frame parts with the door leaf core, equipped with clamping devices Conveyor belt angle transfer with shuttle transfer of the door leaf cores to the glued hardboard panels Second area consists of: Feeding of the hardboard panels Brush cleaning machine Hardener application machine from below Glue application machine from below Disk roller conveyor Angle transfer for the lower hard fiber board Vacuum turning device for the upper hard fiberboard Automatic loading station for hardboard panels and door leaf cores Two door presses with two x four pressing stations each, set up parallel to each other Both presses are loaded at the infeed with one shuttle loading basket Both presses are unloaded at the outfeed with one shuttle unloading basket Angular transfer to the infeed into a hedgehog buffer Angular transfer at the outlet of the hedgehog buffer and feeding for stacking One-sided vacuum destacking with protective plate placement Note: The technical data and descriptions are transcribed from the original order confirmation. The information is for reference only and is not legally binding.

Condition: good (used), Year of construction: 1990, Hydraulic press Manufacturer: JOSSI Type: HP 5N Year approx. 1990 Press force max: 5 t (50 kN) Pressure: 200 bar Installation height: 120 mm Throat depth: 105 mm Max. piston stroke: 90 mm Ram mounting: 14 mm. Two-hand and foot operation. Total weight incl. hydraulic tank: 150 kg. In good condition. Djdpfx Adoyn Euujyoup

Condition: used, Year of construction: 2006, color: other, washing container for washing underground containers with high pressure! = More information = Year of manufacture: Jan 2005 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible.Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Dsdoyrq N Eopfx Adysup Please check before purchasing that all the options described that are important to you are actually present.We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration.Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m.You can find us at:Middelingenseweg 22 5321 JH Hedel The NetherlandsAnd reach us at:Trucks: Passenger cars: Website: Email:

Condition: used, Year of construction: 1989, total height: 2,900 mm, total width: 1,800 mm, total length: 2,000 mm, Empty weight: 5.600 kg Price: On request - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 122692 - Drive system: Conventional - Press force [ton]: 63 - Throat depth [mm]: 140 - Motor power: 7.0kW - Transport dimensions: 2000mm x 1800mm x 2900mm (l x w x h) - Transport weight [kg]: 5600kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dsdpfxow Hzvms Adyeup Lukas van Rossum

Condition: new, The briquette press is designed for compressing all types of sawdust and wood shavings into briquettes. The briquetting press features a compact, user-friendly design and is manufactured in Germany. The large oil tank enables continuous operation. The briquette press is ready for immediate use – simply plug it in and start working. Dodpfx Aoyr Tpnjdyjup

Condition: excellent (used), Year of construction: 2011, DRLTS 3000 x 2500 Table dimensions (L x W): 3,000 x 2,500 mm Overall dimensions (L x W x H): 6,374 x 2,500 x 1,200 mm Payload: 60,000 kg Motor speed linear unit: 2,500 rpm Power consumption: 35 kW Year of manufacture: 2011 Weight: 26,000 kg Dodpfx Adsyqwxdjyoup

Condition: new, For industrial production of rectangular briquettes The ZBP 500 compacts pressable materials into high-density briquettes. The briquettes are easy to store and, thanks to their stackability, can be transported efficiently. In the press chamber of the hydraulic press unit, the briquettes are shaped by a pressure cylinder. This allows up to nine briquettes per minute to be produced with a pressing force of 1 kg/cm². Standard equipment:  Safety limit switches for oil temperature and oil level  Oil cooler  Automatic briquette length monitoring Duodpfx Ajyr I Hzjdyop  Automatic hopper fill level monitoring  Control cabinet with PLC control for fully automatic operation Options:  Custom hopper extension available to meet customer requirements  Press stamp with inscription / logo

Condition: new, machine/vehicle number: AMIS Brikettierpressen Typ ZBP 50, 60 und 70, AT A GLANCE: Variable container dimensions (customizable to customer requirements) Left- or right-hand configuration Hydraulics with separate oil tank All model series also available as “DUO” variants Wood chips, sawdust, wood shavings, etc. are generated in all woodworking and industrial processing businesses. Every day, storage and transport costs for these materials are significant. Briquetting presses offer the ideal solution, as briquettes are easy and space-saving to store and transport. Additionally, the risk of spontaneous combustion is significantly reduced. Dsdpfx Adeyr I Hujysup Briquetting presses require little space, are robustly constructed, and equipped with low-maintenance technology. Whether wood, paper, biomass, foam, or polystyrene – the ZBP series briquettes any suitable material. With a throughput capacity of up to 35 – 130 kg/h, they are particularly suitable for small and medium-sized enterprises. Flexible installation options thanks to the availability of left- and right-hand designs. So start briquetting today!

Condition: new, machine/vehicle number: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideal for combustion in wood gasifiers and smaller wood chip boilers or heating systems. Any material from a woodworking operation (shavings, dust, etc.) can be briquetted. Dsdpfx Asyr I Hnjdyjup Wood chips, sawdust, wood shavings, etc., are generated in all craft and industrial woodworking companies. These materials incur significant storage and transport costs on a daily basis. Briquetting presses offer an ideal solution by compressing the material into briquettes, which are simple and space-saving to store and transport. Furthermore, the risk of spontaneous combustion is significantly reduced. The briquetting presses require little space, feature sturdy construction, and are equipped with low-maintenance technology. Whether it is wood, paper, biomass, foam, or polystyrene, the ZBP can briquette all suitable materials. With a throughput of up to 35 – 130 kg/h, they are especially suited for small and medium-sized enterprises.