Used T45 for sale (157)

Condition: excellent (used), Catalogue number 6462 TECHNICAL DATA - 2.2kW motor - 380V power supply - Head traverse motor 0.9kW - Extraction port diameter 2x100mm - Dimensions (L/W/H): 1330x1100x1220mm - Weight: 920kg Machine equipped with: – 2 tables with angle stops, size 385x330mm – 2 pneumatic clamps – Tables angle-adjustable in two planes – Capability for machining longitudinal and round tenons on the tables – Height-adjustable tables – Tenon width adjustment – Central lubrication – Unpainted – Made in Italy – Used tenoning machine, very good condition Laodpfx Akszr U Evolog Net price: 23,900 PLN Net price: 5,690 EUR Net price calculated at the exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Ljdpfx Akez A Hhujleag

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm Laodpeqlclbjfx Aklsg - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; Lodpfx Aksqlck Noljag The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm Ljdpfx Asqlckpsklsag 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 506925, functionality: fully functional, operating hours: 261 h, power: 5.5 kW (7.48 HP), planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, overall weight: 1,260 kg, Offering a used MARTIN thickness planer, model T45. Sale due to restructuring of the company. General Technical Specifications: Planing width: 630 mm Maximum planing depth: 12 mm Planing height: 2.8 - 300 mm Minimum workpiece length: 270 mm Weight: approx. 1,200 kg Table length: 1260 mm Speed: 5000 rpm Thickness table extension 630 x 450 mm, foldable Year of manufacture: 2011 5.5 kW (7.5 hp); maximum planing width 630 mm The machine provides first-class results in planing operations. Operation: 1-axis control for planing dimensions, maximum 99 values can be stored, Button for manual quick and fine adjustment of the planing thickness according to the digital display, Push buttons for starting and stopping the cutterhead, Cutterhead: TERSA full-steel cutterhead Z4 D=125 mm; including locking mechanism for easy cutter replacement Groove for accommodating planing cutters. Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles, preventing tipping, table surface finely planed. Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers D=85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. Extraction: High-swiveling, split hood with chip extraction connection D=160 mm, Lajdpszwpvaofx Akljg Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease nipples. The machine is still connected and can be tested. Price is quoted plus VAT.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 1,260 mm, total width: 1,280 mm, total height: 1,220 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, • Operation: 1-axis control for planing dimensions, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence. • Buttons for manual quick and fine adjustment of the planing thickness according to the digital display. • Push buttons for starting and stopping the cutterhead. • Integrated operating hour counter. • TERSA all-steel cutterhead with 4 knives. • 2nd rubber feed roller, 85 mm, complete. • Thickness table extension, foldable, 630 x 450 mm. • Thickness table: Electric thickness table adjustment with fine adjustment, feed speed 10 mm/s, mounted on 4 support spindles to ensure stability, table surface finely planed. • Feed: 2 speeds 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. • Extraction: High-pivoting, divided hood with chip extraction connection Ø 160 mm, can be connected on the left or right (on both sides in special cases), minimum extraction air volume: 27 m³/min. at 20 m/s. • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutterhead via grease nipples. • Weight: approx. 1,200 – 1,400 kg • Workpiece length min. 270 mm. Lsdpfjzvfm Esx Akljag

Condition: used, Year of construction: 1988, machine/vehicle number: 1, Falzmaschine - Folding Machine MBO T45-1-45/4-KBYear ca. 1988 - Serial-No. 01/124 Folding width max. 450mm 1. Folding Unit 4 Buckles Laodpfxjh Ax Uij Akleg 1. Folding Unit 1 Knife Machine Control MBO MCC2 Stream Delivery Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, rotational speed (max.): 6,000 rpm, 3-axis CNC panel saw model TECNOMAC ENG T45 V380/50 "CE" NEW – AVAILABLE FOR IMMEDIATE DELIVERY ▸ Aluminium sliding table 3200x430 mm ▸ Sliding stroke: 3400 mm ▸ CNC-controlled lifting/tilting/parallel rip fence Ljdpfx Akey N T N Reloag ▸ Parallel fence travel: 1300 mm ▸ Saw blade tilt range: 0-45° ▸ Max blade diameter with scorer installed: 400 mm ▸ Max blade diameter without scorer: 450 mm ▸ Rotation speed: 4500/6000 rpm ▸ Main motor power: 5.5 kW ▸ Scoring unit with independent 1.1 kW motor ▸ Scorer blade diameter: 120 mm ▸ Scorer speed: 8200 rpm ▸ Parallelogram-type extraction hood ▸ Machine start control on carriage ▸ Hold-down clamp on carriage ▸ Digital readout on extendable fence ▸ Pendant control panel with PLC touch-screen Machine available for viewing at our Gorizia facility (by appointment only).

Condition: good (used), Weiss SC/KWT 450 Salt Spray Chamber / Corrosion Test Cabinet Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Machine type: Salt spray chamber / Corrosion test cabinet Size: 450 l For sale is a used Weiss SC/KWT 450 salt spray test chamber for corrosion, material, coating, and quality testing. The system features a programmable control unit, brine supply, compressed air treatment, as well as connections for demineralized water and exhaust air. Technical data: Test chamber volume: approx. 360 l Brine tank: approx. 180 l Test chamber (H x W x D): approx. 740 x 850 x 570 mm Max. test specimen weight: 100 kg Max. load per rod: 8 kg Electrical data: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Permissible operating overpressure: 6 bar Supply data: Compressed air consumption: approx. 1.5 Nm³/h Brine consumption: approx. 0.5–1 l/h Demineralized water consumption: approx. 0.4 l/h Equipment: Programmable control unit Test chamber with sample holders Brine supply system Compressed air treatment Connection for demineralized water Exhaust and brine drain Original operating/service manuals Accessories as shown in the pictures Dimensions / Shipping data: External dimensions (L x W x H): approx. 1,930 x 800 x 920 mm Weight (empty): approx. 140 kg Shipping by freight forwarder possible Condition: Used – Year of manufacture 2001 Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of supply: Weiss SC/KWT 450 salt spray chamber Lodjzzzpgspfx Akleag Sample holders as shown in the pictures Original operating/service manuals Accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to change, errors and prior sale.

Condition: used, functionality: fully functional, Year of construction: 1999, load capacity: 2,900 kg, Clamp fork Condition (Technical): normal Description: German: KAUP clamp fork 1T453 No.: R0812 Year of manufacture: 1999 Manufacturer: KAUP Type: 1T453 Load capacity: 2,900 kg Load center: 500 mm Center of gravity: 340 mm Load center distance: 291 mm Weight: 1,085 kg Max. hydraulic pressure: 160 bar Serial number: 9003608 The KAUP clamp fork is a hydraulic attachment for forklifts, enabling both the normal lifting of loads via the fork tines and the lateral clamping of suitable goods. The attachment is in used condition, with cosmetic wear commensurate with its age. A thorough technical inspection and a check of compatibility with the respective forklift should be carried out before use. Fast and straightforward transport is possible upon request! This advertisement serves solely to identify the attachment. A detailed description of the condition and possible equipment is provided individually upon request. Subject to errors and prior sale. Sale only to commercial businesses. All sales of used equipment are made without warranty or guarantee. If you have not found the right attachment, please contact us. We have a large selection of other equipment and attachments available on site. English: KAUP Clamp Fork 1T453 No.: R0812 Year of manufacture: 1999 Manufacturer: KAUP Type: 1T453 Capacity: 2,900 kg Load centre: 500 mm Centre of gravity: 340 mm Lost load centre: 291 mm Weight: 1,085 kg Max. hydraulic pressure: 160 bar Serial number: 9003608 The KAUP clamp fork is a hydraulic forklift attachment and can be used both for conventional handling with the forks and for clamping suitable loads from the sides. The attachment is in used, age-related visual condition. A detailed technical inspection and verification of compatibility with the respective forklift should be carried out before use. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the attachment. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right attachment, please contact us. We have a large selection of additional equipment and attachments available on site. Lodpfxszt Drho Akleag

Condition: used, axle configuration: 3 axles, first registration: 09/2026, color: other, Year of construction: 2019, Empty weight: 5.720 kg Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers! Lsdozz Nzkepfx Akljag

Condition: used, axle configuration: 3 axles, first registration: 09/2026, color: other, Year of construction: 2017, Empty weight: 5.700 kg Lajdpfozz Im Ejx Akleg Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Axle 3: left 9 mm right 9 mm We have the possibility to stack trailers!

Condition: good (used), mileage: 549,736 km, power: 331 kW (450.03 HP), first registration: 02/2015, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 8x4, wheelbase: 4,760 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 8,900 mm, total width: 2,550 mm, total height: 3,280 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, retarder, seat heater, trailer coupling, - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Short cab - Manual - PTO (power take-off) - Pump - Cloth (fabric) - Additional braking system Number of axles: 4, configuration: 8x4, unladen weight: 14,570 kg, gross weight: 41,000 kg, total tank capacity: 40 liters, trailer coupling, kingpin diameter: 50 DIN, fifth wheel coupling: fixed, number of diff locks: 2, suspension type: air suspension, cab type: short cab, cruise control, tachograph (control device), digital tachograph, air conditioning, electric windows, electric mirrors, color: white, heated mirrors, lighting type: halogen lamp, seat heating, flashing lights, engine power: 331 kW (444 HP), fuel: diesel, Euro 6, transmission type: AS-Tronic, gearbox: ZF, gears: 12, additional braking system, retarder brand: Intarder, power steering, ABS, PTO (power take-off), PTO type: 2, starter battery, body year: 2014, system length: 570 cm, system type: Meiller RK 30 62 L, pump, hooklift height: 139, central locking, seat configuration: 1+1, seat upholstery: fabric, seat adjustment: manual Transmission Gearbox: ZF, 12 gears, automatic Axle configuration Axle 1: Tire size: 385/55R22.5; steerable; left tire tread: 13 mm; right tire tread: 13 mm; brakes: disc brakes; suspension: leaf spring Axle 2: Tire size: 385/55R22.5; steerable; left tire tread: 4 mm; right tire tread: 5 mm; brakes: disc brakes; suspension: leaf spring Axle 3: Tire size: 315/80R22.5; twin-tyred; left inner tread: 12 mm; left outer tread: 14 mm; right inner tread: 13 mm; right outer tread: 13 mm; brakes: drum brakes; suspension: air suspension Axle 4: Tire size: 315/80R22.5; twin-tyred; left inner tread: 12 mm; left outer tread: 8 mm; right inner tread: 11 mm; right outer tread: 11 mm; brakes: drum brakes; suspension: air suspension Weights Unladen weight: 14,570 kg Payload: 26,430 kg Gross vehicle weight: 41,000 kg Functional Loading platform height: 133 cm Pump: yes Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1 Identification License plate: KLEYN1 Kleyn Trucks is one of the world’s largest independent used vehicle traders. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European brands, model years, and price classes. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Good prices • Honest business practice • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates arranged quickly Ledpeyu H A Tsfx Aklsag • Expert technical services • Safety of "recognizable quality" • And more… Please visit our website for special offers and the complete inventory. Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rates and submit your request through our website. ...

Condition: used, axle configuration: 3 axles, first registration: 02/2020, loading space length: 8,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, total length: 10,400 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2020, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy wheels = Notes = Number of axles: 3, Tare weight: 5860 kg, Gross vehicle weight: 39000 kg, Chassis material: Steel, Kingpin size: 2 inch, Alloy wheels, ABS, EBS, Body construction year: 2021, Material of side wall: Aluminum, Number of sides: 1, Drum volume: 47, Drum volume in: m3, Axle type: SAF = Additional Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 10 mm; Tire tread depth right: 11 mm Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 13 mm Axle 3: Tire tread depth left: 5 mm; Tire tread depth right: 12 mm Weights Unladen weight: 5,860 kg Payload: 33,140 kg GVW: 39,000 kg Functional Loading platform height: 140 cm Environmental Emission class: Euro 0 Lasdpfxexhcl Nj Aklsg Condition Overall condition: Average Technical condition: Average Optical condition: Average Damage: None Financial Information Leasing price: €402 per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands, from various years and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing inventory • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), Year of construction: 2006, functionality: fully functional, 6 x vertical feeders 2 x horizontal feeders 2 x bypass feeders Stitching station Trimmer Lodpfoxbpk Eex Akleag Cross stacker CHA. FJ.DKSA-0000058, year 2006

Condition: excellent (used), Year of construction: 2015, Holzkraft T 45 W classic Year of manufacture: 2015 Ljdpfjzzci Usx Akloag Table saw with a robust steel-cast iron construction Tilts up to -45° Usable spindle length: 108 mm Max. tool diameter: 190 mm Table dimensions: 1000 x 435 mm Dimensions of aluminum sliding table: 1000 x 270 mm Motor: 4 kW, 400 V 3500/6000/8000/10000 rpm Equipped with a crosscut fence and sliding table Support arm on a swivel arm Aluminum telescope fence with folding stops and eccentric clamping device Otherwise, standard version Includes a 3-roller feed device

Condition: new, Year of construction: 2025, Stable steel cast iron construction With rigid milling spindle 3 spindle speeds from 3500 to 10000 min⁻¹ Milling spindle with clockwise/counterclockwise rotation Large-sized milling head made of cast iron, mounted directly on the table With extraction hood under the work table for improved extraction Solid and precise cast iron table Fast and easy speed changes High-performance motor with 5.0 kW Standard arc milling guard Quality Made in Italy Equipment details Cast iron milling head Mounted directly on the milling table Milling spindle mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10000 min⁻¹ High-performance motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and protective plate for maximum safety. Milling fence Precise milling fence with quick adjustment and fine adjustment with a scale on the fence cheek The integrated extraction port ensures a clear view Milling table opening A large milling table opening also allows the use of larger planing cutters and tenoning and slotting tools above and below the table Arc milling guard Included as standard Reversible fence cheeks Versatile fence that can be integrated to bridge the tool gap Enables safe working even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx. 240 kg Extraction connection Extraction nozzle diameter 2 x 120 mm Work table Work table length 1945 mm Table height 900 mm Work table width 695 mm Installation information Space required Length 1945 mm Machine body Width/Depth 575 mm Space required Width/Depth 920 mm Working area Length 1600 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Working area Width/Depth 1600 mm Lsdpfxshp Rcrj Akleag Machine body Length 1000 mm Explanation of working area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Motor power 5.0 kW Mains frequency 50 Hz Milling spindle Usable spindle length 100 mm Spindle speed(s) 3500/7000/10000 min⁻¹ Spindle overhang max. above table 130 mm Spindle arbor diameter 30 mm Maximum milling tool diameter Maximum tool diameter that can be lowered 180 mm SCOPE OF DELIVERY Arc milling guard Aluminum fence cheeks Table extension left and right Extendable workpiece support

Condition: used, mileage: 395,000 km, power: 332 kW (451.39 HP), first registration: 09/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: mechanical, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, * German vehicle * Three-way tipper with Bordmatic * Hiab XS 122-3PRO Lasdpfxszz Ub Ao Akljg * 3x hydraulically extendable * 6th and 7th control circuit for grab and servo operation * ZF double H-split gearbox If interested, please call Christian Bredemeier

Condition: used, Year of construction: 2018, travel distance X-axis: 510 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 70 m/min, rapid traverse Z-axis: 70 m/min, feed length X-axis: 510 mm, feed length Y-axis: 600 mm, feed length Z-axis: 700 mm, feed rate X-axis: 70 m/min, feed rate Y-axis: 70 m/min, feed rate Z-axis: 70 m/min, nominal power (apparent): 63 kVA, torque: 900 Nm, workpiece height (max.): 490 mm, workpiece diameter (max.): 535 mm, workpiece weight (max.): 200 kg, total height: 3,470 mm, total length: 4,150 mm, total width: 3,120 mm, table load: 200 kg, rotary table diameter: 450 mm, rotational speed (max.): 80 rpm, overall weight: 18,000 kg, distance between spindles: 540 mm, number of spindles: 2, number of slots in tool magazine: 112, tool length: 550 mm, tool diameter: 75 mm, tool weight: 12,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We are offering this very well-maintained, twin-spindle, 5-axis machining center, MAG SPECHT 450 DUO, manufactured in 2018. Manufacturer: MAG / FFG Machine Type: SPECHT 450 DUO Year of Construction: 2018 Condition: very good Operating Hours: 15,908 hours Machine Number: X.0112.6552 Order Number: E.7500194.001 Wiring Diagram Number: E.7500194.001 Location: 36199 Rotenburg an der Fulda, Germany Inspection: possible under power The machine is designed as a highly productive, twin-spindle machining center for series production and features 5-axis machining, two working spindles, and HSK-A63 tool holders. Technical Data: Year of Construction: 2018 Machine Number: X.0112.6552 Number of Spindles: 2 Machining: 5-axis Tool Holder: HSK-A63 Travel X: 510 mm Travel Y: 600 mm Travel Z: 660 / 700 mm Axis Speed X/Y/Z: up to 70 m/min Spindle Distance: 540 mm B-/A-Axis: up to 80 rpm B-Axis Division: 360° x 0.001° Table Plate Diameter: 2 x 450 mm Table Load: 2 x 200 kg Max. Interference Diameter of Workpiece/Fixture: 2 x 535 mm Max. Workpiece and Fixture Height: 490 mm Max. Weight Moment at 90°: 900 Nm Tool Magazine: Lodpfx Akez Ar H Ssloag 112 tool positions HSK 63 Tool Diameter with Full Load: 75 mm Tool Diameter with Empty Spaces: 140 mm Max. Tool Length: 550 mm with front loading Max. Tool Weight: 12 kg Total Weight of Tools in Magazine: max. 420 kg Accuracy / Measuring System: Path Measuring System X/Y/Z: 0.0001 mm Positional Accuracy: 0.005 mm Positional Repeatability: 0.004 mm Machine Dimensions: Width: approx. 3,120 mm Length: approx. 4,150 mm Height: approx. 3,470 mm Machine Weight: approx. 16,000–18,000 kg Electrical Rated Power according to Nameplate: 63 kVA Operating Voltage: 400 V / 50 Hz The machine can be inspected under power at the Rotenburg an der Fulda location by appointment. Technical documentation is available. Sale from location. Subject to prior sale and errors in the technical data.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 42,874 h, working width: 300 mm, cutting length (max.): 6,300 mm, workpiece width (max.): 120 mm, cutting speed: 300,000 mm/min, Optimizing Cross-Cut Saw manufactured in 2019. This WEINIG / DIMTER OptiCut 450 features a maximum board length of 6,300 mm and a wood thickness capacity ranging from 12 mm to 120 mm. It includes a powerful saw motor with 7.5 kW and a feed speed of up to 300 m/min. If you are looking to get high-quality cutting capabilities, consider the WEINIG / DIMTER OptiCut 450 machine we have for sale. Contact us for further details. • Working Height: 900 mm • Feed Direction: Left-hand feed • Blade Diameter: 500 mm • Blade Bore: 30 mm • Input Length, Min.: 500 mm • Input Length, Max.: 6,300 mm • Wood Width, Min.: 30 mm • Wood Width, Max.: 310 mm • Wood Thickness, Min.: 12 mm • Wood Thickness, Max.: 120 mm • Maximum Rectangular Wood Section: 310 × 12 mm • Maximum Rectangular Wood Section: 190 × 120 mm • Minimum Fixed Length After Sawing: 150 mm • Minimum Fixed Length at End of Board: 180 mm • Maximum Board Curvature: 10 mm/m • Length Tolerance: ±3 mm • Cutting Thickness Accuracy: ±0.8–1.5 mm • Feed Speed, Continuously Adjustable: Max. 300 m/min • Cutting Cycle Time, Including Braking and Acceleration: 0.6–1.0 sec. • Saw Motor Power: 7.5 kW (10 HP) • Feed Motor Power: 5.0 kW (7 HP) • Vario Conveyor Motor Power: 2.5 kW (3.4 HP) Ledpfx Aozwu Hwskloag • Electrical Connection: Approx. 18 kW • Operating Voltage: 400 V / 50 Hz • Control Voltage: 230 VAC / 24 VDC • Nominal Current: 30 A • Fuses: 35 A • Compressed Air Consumption: Approx. 1,200 Nl/min • Operating Pressure: Approx. 8 bar • Extraction Air Velocity: Approx. 30 m/sec. • Extraction Air Volume: Approx. 1,800 m³/h • Sorting Conveyor Width: 250 mm • Usable Conveyor Width: 210 mm • Maximum Workpiece Width: 300 mm • Exit Conveyor Length: 7.5 m • Automatic Width Measurement: Laser distance sensors • Width Measurement Accuracy: Max. ±2 mm • Number of Active Products: Max. 16 • Minimum Wood Thickness for Measurement: 12 mm • Scrap Pit Width: 250 mm • Maximum Scrap Length: Approx. 120 mm • Heavy-Duty Ejector: For workpieces over 20 kg • Ejector Plate Height: 80 mm • Writing Length: Workpiece length − 10 mm • Control Panel: OptiCom Pro 18.5" • Display Type: Industrial TFT touchscreen • Display Resolution: 1366 × 768 pixels • Front Protection: IP65 • Board Infeed Capacity: Up to 6.3 m • Marking Station: 2 marking positions • Marking Bench Length: 5 m • Electrical System: 400 V / 50 Hz • UPS: 24 V supply • Operating Hours: 42,874 h

Condition: used, mileage: 550 km, power: 18 kW (24.47 HP), first registration: 01/2022, fuel type: diesel, overall weight: 3,300 kg, color: yellow, gearing type: mechanical, suspension: other, operating hours: 550 h, Equipment: all wheel drive, Road legal, diesel Commissioned on January 2nd, 2022 18 kW 550 operating hours Weidemann hydraulic intake 3rd circuit all-wheel drive hydrostatic 2 driving speeds Road legal Earth bucket Pallet fork Demonstration unit Permissible total weight 3,300 kg Year of manufacture 2021. FOR US, THE CONDITION AND THE GUT FEELING ARE DECISIVE, THE PRICE COMES SECOND. If you have any further questions, Mr. Faller will be happy to help you at the number. //*EXCHANGE, TRADE-IN OR LOAN FOR YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE!All information without guarantee* You can find further offers on our homepage: The description and data provided do not constitute a guarantee and are not binding. The purchase contract concluded in the car dealership when purchasing the vehicle is binding. Errors and prior sale reserved! Ljdpfevicx Aex Akljag

Condition: used, empty load weight: 7,396 kg, maximum load weight: 31,604 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 07/2014, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 97 m³, total length: 13,620 mm, suspension: air, tire size: 455/40 22,5, tire condition: 50 %, color: white, Year of construction: 2014, front tire size: 455/40 22,5, rear tire size: 455/40 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41691 Schmitz, SCS * Year of construction: 2014 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Plain tarpaulin * Fixed roof * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Lashing eyelets in the outer frame (Multilock outer frame) * Pallet stop bar * Mechanically operated roof * Portal door * Air connection, coupling head (red + yellow) * Connector plug, 2x7-pin * Connector plug, 15-pin * Lifting and lowering system * Ferry lashings * Storage box / Tool box * Galvanized Lasdpezyx Iqefx Akljg * Suspension: Air * Gross vehicle weight: 39,000 kg * Tare weight: 7,396 kg * Payload: 31,604 kg * Permissible gross vehicle weight: 39,000 kg * Tire condition 1st axle: 40% -- 30% - Tire size: 455/40 R22.5 * Tire condition 2nd axle: 80% -- 80% - Tire size: 455/40 R22.5 * Tire condition 3rd axle: 50% -- 40% - Tire size: 455/40 R22.5 * Tire sizes: 455/40 R22.5 * Internal dimensions: L=13620 mm, W=2480 mm, H=2900 mm * Internal volume*: 98 m² * Number of pallet spaces: 34 * Speed Curtain, 1 side Disclaimer: Subject to changes, prior sale and errors. More pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / Sale / Rental of commercial vehicles * Quick and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork etc. * Professional loading / Load securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained specialist staff, we will be happy to advise you.

Condition: used, empty load weight: 7,396 kg, maximum load weight: 31,604 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 06/2014, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 97 m³, total length: 13,620 mm, suspension: air, tire size: 455/40 22,5, tire condition: 70 %, color: white, Year of construction: 2014, front tire size: 455/40 22,5, rear tire size: 455/40 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 41694 Schmitz, SCS * Year of manufacture: 2014 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Plain tarpaulin * Fixed roof * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Lashing eyelets in the outer frame (Multilock outer frame) Ledpfx Ajzyfwfskloag * Pallet stop bar * Mechanically operated lift roof * Portal door * Air connection coupling head (red + yellow) * Connection plug 2x7-pin * Connection plug 15-pin * Lifting and lowering device * Ferry lashing * Storage box / toolbox * Galvanized * Suspension: Air * Total weight: 39,000 kg * Unladen weight: 7,396 kg * Payload: 31,604 kg * Permissible total weight: 39,000 kg * Tire condition 1st axle: 80% – 80% - Tire size: 455/40 R22.5 * Tire condition 2nd axle: 60% – 60% - Tire size: 455/40 R22.5 * Tire condition 3rd axle: 80% – 80% - Tire size: 455/40 R22.5 * Tire sizes: 455/40 R22.5 * Internal dimensions: L=13620 mm, W=2480 mm, H=2900 mm * Internal volume*: 98 m² * Pallet spaces: 34 * Speed Curtain, one-sided Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / Sale / Rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,812 h, functionality: fully functional, machine/vehicle number: FJ.DKA0-000212, product width (max.): 480 mm, product height (max.): 12 mm, product length (max.): 320 mm, TECHNICAL DETAILS Performance (cycles/hour) Speed: max. 14,000/h Wrapping speed: max. 14,000/h Lsdszw Ak Rjpfx Akleag Pre-folding: max. 12,000/h Piston opening: max. 12,000/h Offset stitching: max. 12,000/h Dimensions – Width × Spine Length Uncut: max. 320 × 480 mm Uncut: min. 85 × 128 mm Single-up Cut: max. 315 × 475 mm Minimum cut size: 80 × 120 mm Double-up Uncut: min. 85 × 210 mm Trim mark Cut: min. 2 × 64 × 100 mm Product height (compressed) 3-knife cut: max. 12 mm Middle cut as trimming cut: 10 mm Middle cut as punching cut (half punching width): max. 6 mm Triple cut as trimming cut: 5 mm MACHINE DETAILS Operating hours (according to counter): 14,812 h EQUIPMENT 1 CHU feeder 2 DVU vertical feeders 2 DHU horizontal feeders 1 Stitchmaster three-knife cutting machine with middle cut 2 knife sets 4 stitching heads CHA forklift Note: Further technical details can be found in the attached document.