Used T 40 E for sale (97,935)

Condition: excellent (used), Year of construction: 2011, cutting diameter 400 mm capacity 90 degrees: flat 500 x 400 mm saw band length 6220 x 41 x 1.3 mm speed 15.0 - 150 m/min work height max. 750 mm workpiece weight ca. 250 - 300 kg/m Control MEBA NC coolant tank capacity 80.0 ltr. oil volume 30.0 ltr. power capacity 5.5 kW weight of the machine ca. ca. 2250 kg range L-W-H 3100 x 1620 x 2150 mm Current list price: approx. 50.000 euros Special price available upon request Features: - MEBA - Fully automatic "two-column linear guide system" * Fully automatic machine for 90° cuts only - User-friendly NC dialog control * With plain-text display 5.7-inch CE panel * Program memory with 50 programs, each with 20 steps - Automatic material feed * Minimum cutting diameter .. Ø 5.0 mm * Residual piece length without bundle clamping .. manual 25.0 mm * Residual piece length without bundle clamping .. automatic 110 mm * Automatic movement of the clamping blocks - Rapid-feed lowering of the saw frame * With automatic material detection Bodpjz Dkzuofx Afmelp - Band saw speed via frequency-controlled AC drive (15-150 m/min) - Automatic cutting pressure and feed monitoring - Driven chip-clearing brush via friction wheel - Hydraulic full-stroke material clamping - Saw blade angled 3° relative to the material support surface - Saw blade idler rollers with carbide guides - Manual saw blade tensioning - Removable coolant tank for easy cleaning - Operating instructions

Condition: used, Year of construction: 2018, operating hours: 7,490 h, functionality: fully functional, machine/vehicle number: Robot: 4600-107494 / Controller: 4600-107494, overall weight: 538 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. Condition: used and tested. Typical applications include handling, assembly, machining, and general automation. Payload: 40 kg with a reach of 2550 mm. Year of manufacture: 2018. Operating hours: 7490. Software: RobotWare RW 6.07.01.00. Equipped with an ABB FlexPendant programming device, connection cable set, and a Foundry Plus protective version with a label bearing the inscription “Foundry Plus”. Bodpfx Afezamf Sjmjlp

Condition: good (used), Year of construction: 2011, overall weight: 19,700 kg, total length: 5,100 mm, total width: 2,200 mm, total height: 3,400 mm, Press force: 230 t Bending length: 4050 mm Distance between uprights: 3550 mm Upright overhang: 420 mm Oil capacity: 400 l Control system: ModEva 10S Machine weight (approx.): 19700 kg Dimensions: 5100 x 2160 x 3420 mm Equipment/Accessories: Bledpjztafqofx Afmjp - Automatic tool clamping, pneumatic - Motorized crowning - Akas-Fiessler safety laser - Bending aid 1 + 2 (right and left) - Die shifting m1 and m2 - Axis-controlled: Y1, Y2, Xs, Xm, X delta, R, Z1, Z2

Condition: used, Year of construction: 1985, round bar steel 40 mm square edge steel 40 mm L-beam 120 x 12 mm Punch power 600 kN hole punching press: throat 400 mm hole punching press: max. length of stroke 32 mm hole punching press: capacity (dia. x thick.) 30 x15 mm hole punching press: capacity (dia. x thick.) 20 x 20 mm notching: l + T material 80 x 10 mm no. of strokes 40 / 46 Hub/min shear: flat material 150 x 15 mm shear: length of knifes 275 mm total power requirement 3 kW weight of the machine ca. 2,9 t dimensions of machine L x W x H 2,18 x 0,83 x 2,15 m Bedpfjydqn Sjx Afmolp Accessories: tool cabinet with various punches and dies, length stop

Condition: used, Year of construction: 2017, operating hours: 18,243 h, functionality: fully functional, machine/vehicle number: Robot: 4600-105209 / Controller: 4600-105209, overall weight: 562 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. Condition: used and tested. Typical applications include handling, assembly, machining, and general automation. Payload: 40 kg with a reach of 2550 mm, manufactured in 2017, with 18,243 operating hours and RobotWare RW 6.05.00.00 software. Equipped with an ABB FlexPendant teach pendant and a connection cable set. Bjdpfjzamc Dsx Afmolp

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2535, type of input current: three-phase, product height (max.): 150 mm, product length (max.): 450 mm, product width (max.): 280 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 16 A, width of welding knife: 480 mm, length of welding knife: 380 mm, overall weight: 750 kg, year of last overhaul: 2018, energy consumption: 8 kWh, Neatly refurbished packaging machine with shrink tunnel. Possibility to test run at our location. Maximum speed of 30 pieces per minute. Maximum single fold film width 600 mm. Transport not included. Bljdpswutu Refx Afmjp

Year of construction: 2003, condition: used, machine/vehicle number: TUNNEL 40/27, Manufacturer: SFERE EMBALLAGE S.A. Year of manufacture: 2003 Electrical current: 10 A CE marking on manufacturer's plate Heat shrink wrapping Integrated through-feed conveyor Heating chamber with top cover Front control panel Integrated digital display Rotary adjustment control Control buttons on the front Emergency stop on the front panel Lateral switch-disconnector Mobile metal frame on casters Adjustable stabilizing feet Electrical hazard warning Used SFERE EMBALLAGE TUNNEL 40/27 heat shrink tunnel – Through-feed conveyor and digital control General description Blsdpfx Ajz Urq Hefmsp The used SFERE EMBALLAGE TUNNEL 40/27 heat shrink tunnel is a professional piece of equipment designed for heat shrink wrapping operations. Manufactured in 2003 by SFERE EMBALLAGE S.A., a French manufacturer, it allows products that have been previously wrapped in suitable film to undergo a heating phase as they pass through the tunnel. Designed to be integrated into a professional packaging environment, this heat shrink tunnel features a through-feed conveyor, a front control panel, and a mobile frame. Its manufacturer's identification and visible equipment allow for a clear understanding of its configuration without presuming its current performance. Why this model stands out The SFERE TUNNEL 40/27 combines product conveyance with a heat shrink operation. This configuration facilitates the organization of a packaging station where items, already wrapped in film, pass through the heating zone before subsequent handling or shipping steps. Its control panel with a digital display allows for the monitoring of an operating parameter. A rotary control and several control elements are also visible on the front. The frame mounted on casters, complemented by stabilizing feet, is a practical asset for positioning the machine in a workshop. Key advantages Through-feed conveyor to accompany the passage of products through the tunnel Heat shrink principle suitable for heat shrink wrapping operations Digital display integrated into the front control panel Rotary control accessible to the operator Emergency stop present on the control panel Lateral switch-disconnector visible on the machine Frame on casters facilitating movement Stabilizing feet to immobilize the equipment at the workstation Manufacturer's plate for identifying the model and its year of manufacture

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, overall weight: 22,400 kg, total length: 24,000 mm, total width: 3,500 mm, load capacity: 40 kg, power: 40 kW (54.38 HP), Equipment: documentation/manual, ABUS bridge crane, 40 t + 16 t auxiliary winch. Year of manufacture: Crane and main winch: 1997. Auxiliary winch: 2003. The crane was installed in this facility in 2003. Span: 21,100 mm. ABUS wire rope winches. Radio remote control. Bjdpfx Aozzagqefmelp Power supply: 3 x 400 V. Price excludes dismantling. Dismantling and transport can be arranged.

Condition: like new (used), functionality: fully functional, Equipment: documentation/manual, foot remote control, Sideros Syncrolift column lift swivel device, 4000 kg load capacity, in new condition, mobile with numerous accessories Minimum height: 350 mm Maximum height: 1800 mm Bljdpfx As Ahdrnjfmep Vertical travel: 1450 mm Diameter of clamping plate: 600 mm, additional hole plate mounts, plasma nitrided Overall height: 2505 mm Total weight: 1300 kg Torque: 3500 N/m Speed: 0.75 rpm Complete with CE marking and documentation, as well as a declaration of conformity.

Condition: excellent (used), Year of construction: 2001, For sale is a fully functional and very well-maintained gas burner from Weishaupt, model RGL40, including gas piping (Dungs DN); with control unit and burner control system; in TOP CONDITION. 1. Burner type: RGL20/1-B Output: 450 - 2550 kW Design: ZM Year of manufacture: 2001 Connection pressure: 15-500 mbar Blodpfx Ajy Urrzsfmsp

Condition: used, Year of construction: 2007, x-travel 620 mm Bedpfxjyq Sv De Afmjlp y-travel 420 mm z-travel 400 mm control TNC 320 HEIDENHAIN spindle taper ISO 40 spindle turning speed range 50 - 4.000 U/min table-size 800 x 400 mm table load 400 kg feeds -stepless- 0 - 8000 mm/min rapid traverse 8,0 m/min power capacity 6,0 kW quill stroke 80 mm voltage 400 V total power requirement 17,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,90 x 2,70 x 2,05 m - .: 90288 - Control: TNC --- - electrical hand wheel - Horizontal milling spindle - Coolant equipment

Condition: used, Year of construction: 2016, operating hours: 13,606 h, load capacity: 4,000 kg, lifting height: 4,100 mm, fuel type: gas, construction height: 2,920 mm, gearing type: automatic, Equipment: cabin, Linde H 40 T - Series 394 - Manufactured in Germany. Used in Germany. Technically and visually in excellent condition and ready for immediate use. Serviced. New accident prevention inspection available upon request. A gas cylinder can be installed upon delivery upon request. 13,606 operating hours Full cab Heating Air conditioning 2-pedal operation 2 front work lights 2 rear work lights Standard mast with 150 mm free lift Cross lever joystick operation Lift height: 4,100 mm Overall height: 2,920 mm Free lift: 150 mm Forks 1,200 x 125 x 50 mm or alternatively for an additional charge Blodev Tau Nepfx Afmop Forks 1,400 - 1,600 - 1,800 - 2,000 - 2,200 - 2,400 mm 3rd + 4th valve / dual auxiliary hydraulics SE tires Front tires 70% Rear tires 70% Technical specifications - errors excepted. Sale without warranty.

Condition: used, Year of construction: 2024, machine/vehicle number: LC649, Used Complete Bottling line for vine - glass - 10.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-quality wine production and industrial packaging applications. Centered around a Sympak Master Tronic 40/48/8-8 platform from 2005, it integrates depalletizing, rinsing, isobaric filling, capsuling, wirehooding, labeling, case handling, palletizing, and end-of-line printing. The system is optimized for glass bottles and includes microfiltration for beverage production quality assurance.Manufacturer: Sympak Bottling & Canning S.p.A.Main platform model: Master Tronic 40/48/8-8Manufacturing year: 2005Container types: Designed for Glass bottle handlingProduct types: Ideal for Wine production applications (still and sparkling)Filling principle: IsobaricFiller capacity: up to 16,000 bphCapsuling capacity: up to 7,200 bphLabeling capacity: up to 5,200 bphElectrical supply: 380 V, 50 HzInstalled power (main monoblock): 33 kWOperating pressure: up to 7 barTemperature limits: TS min 5 °C; TS max +85 °CStandards: CE marked; EN 60204-compliant control rulesAdvanced Automation & Control SystemsThe line incorporates industrial automation for coordinated operation across depalletizing, bottle preparation, filling, and end-of-line packaging. Safety interlocks, guarding, and emergency stop circuits are built in according to CE and EN 60204 electrical safety rules. The isobaric filling environment is pressure-rated for beverage production, supporting stable filling performance and product integrity.Production Line Integration CapabilitiesInfeed depalletizing, conveyors, bottle washer/rinser/dryer, isobaric filler, capsuling and wirehooding stations, labeling, coding, case forming/packing/sealing, palletizing, and stretch wrapping are harmonized for inline operation. The equipment mix supports traditional cork and synthetic closures and integrates microfiltration for quality control. Typical wine bottle sizes and formats can be accommodated through format changeovers as defined by the installed components. The overall line throughput is typically balanced by labeling and capsuling stages, with nominal outputs up to approximately 5,200 bph depending on product and format.Machine Condition & Maintenance HistoryThe line is presented in ready-for-operation working condition, with components noted as reconditioned in Italy. Routine service and reconditioning practices have been applied to ensure reliable performance across the integrated stations. The system reflects professional upkeep, maintaining production quality for industrial bottling and beverage production.Operational Performance & VersatilityDesigned for wine bottling, the isobaric filling configuration combined with dedicated capsuling and wirehooding enables both still and sparkling applications. The inclusion of a Win & Tech microfiltration unit enhances p... Bljdjzd Ucxepfx Afmsp

Condition: used, Year of construction: 2017, operating hours: 8,054 h, Equipment: ABS, all wheel drive, Internal vehicle number: G400161 Available immediately at our location in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Terex TL260 Longarm Wheel Loader | Loading height 5,325 mm | 15.8 t | 8,054 operating hours For sale: a used Terex TL260 wheel loader with an extended lifting arm, manufactured in 2017. Thanks to the longarm design, the machine achieves a loading height of 5,325 mm and is particularly suitable for loading, unloading, and storage operations. The wheel loader features all-wheel drive, a central lubrication system, air conditioning, and a top speed of 40 km/h. Technical specifications: * Manufacturer/Model: Terex TL260 Bedpfxozwiuvj Afmolp * Machine type: Wheel loader * Design: Longarm/Extended lifting arm * Year of manufacture: 2017 * Operating hours: 8,054 hours * Operating weight: 15,800 kg * Loading height: 5,325 mm * Top speed: 40 km/h * Drive: All-wheel drive * Air conditioning * Central lubrication system * ABS * Vehicle number: G400161 * Condition: Used * German machine Inspection and functional testing are possible by prior appointment. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale. We would be happy to accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Year of construction: 2011, condition: used, For sale are three used vertical, free-flow centrifugal pumps from Emile Egger Pump & Co. AG, manufactured in 2011. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V4 LB3B-2 Serial number: T 214050 and T 214050 Year of manufacture: 2011 L/s: 2.77 1/min: 1800 m: 14.7 Connections: DN50 and DN65 Length: 192 cm Quantity: 3 Motor data: Bljdpfxsga Drqs Afmop Manufacturer: VEM motors GmbH Year of manufacture: 07/2011 Type: IEC/EN 60034-1 Serial number: 186889/0003, 186889/0001H, and 186889/0002H kW: 5.5 HP: 7.5 V: 400 A: 10 1/min: 1470

Condition: good (used), Choice of 40” drums to make products such as hash browns, potato waffles etc. Please note that the triangle hash brown unit has now been sold (August 2025) Bsdpfx Afoqpd Ttsmslp

Condition: new, Alzmetall Alzstar 40/SV pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/SV Condition: new Technical data: Column diameter: 115 mm Machine table (usable support): 514 x 360 mm T-slots (number x width x distance): 2 x 14 x 224 mm Distance spindle-table (min./max.): 117 / 701 mm 2 feeds: 0.1 + 0.2 mm/rev Height (mm): approx. 1840 Drilling capacity St 60 (mm): 40 Spindle stroke (mm): 120 Thrust (mm): 293 Motor (kW): 1.45 / 1.9 Bsdoy S Artepfx Afmjlp Speed range (r/min): 160 - 2250 Weight (kg): 285

Condition: excellent (used), New generation Lutetia Type 40 vacuum tumbler direct from recently closed cooked meats factory. In beautiful condition. Bsdpezika Dofx Afmjlp

Condition: used, Offered for sale is a CNC cutting system for plasma and oxy-fuel cutting. Cutting area X/Y: 3100mm/16100mm. Cutting table overall dimensions X/Y: 3305mm/16220mm. Cutting height: 720mm. Number of extraction sections: 32. Extraction sections X/Y: 30mm/500mm and 2mm/550mm. Cutting support X/Y: Flat steel bars 80mm/5mm. Spacing between cutting supports: 75mm. Control system: Lincoln Electric BURNY 10 LCD PLUS CNC controller. Equipped with: 2 oxy-fuel torches, SAF NERTAJET 120 plasma cutting system, BEUTING cutting table type BT500-1IAK, sectional table fume extraction system, Donaldson TORIT DCE DFPRO 8-IP dust collector, 8 oval Ultra-Web FR filter cartridges, dust collection container with 50l capacity and radial fan with 11kW power. Extraction airflow: 6800m³/h at 3400Pa. Inspection possible by arrangement. Bsds Ad Nrfjpfx Afmslp

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A Bedpfx Afsz Sb Rlsmjlp * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Year of construction: 2010, condition: used, For sale is a used vertical, free-flow centrifugal pump from Emile Egger Pumpe & Co. AG, manufactured in 2010. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V4 LB3B-2 Serial number: T 200708 Year of manufacture: 2010 L/s: 2.77 Bodpfegbflusx Afmelp 1/min: 1800 m: 14.7 Connections: DN50 and DN65 Length: 182 cm Quantity: 1 Motor data: Manufacturer: VEM motors GmbH Type: K21R 132 S 4T FDS TPM140 /0543 Serial number: 0883082001004H kW: 5.5 V: 400 / 690 A: 11.8 / 6.85 1/min: 1425 Further data can be found on the nameplate.

Year of construction: 2010, condition: used, For sale is a used vertical, free-flow centrifugal pump from Emile Egger Pump & Co. AG, manufactured in 2010. Bodpfogbflmox Afmjlp Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V2 LB3B-2 Serial number: T 202000 Year of manufacture: 2010 L/s: 2.77 1/min: 2390 m: 26.5 Connections: DN50 and DN65 Length: 192 cm Quantity: 1 Motor: Manufacturer: VEM motors GmbH Year of manufacture: 07/2010 Type: K21R 160M 2 FD TWS HW Serial number: 178086/0001 H kW: 11 HP: 15 V: 400 A: 20 1/min: 2900 Further data, see nameplate.

Condition: excellent (used), operating hours: 6,333 h, lifting height: 3,700 mm, fuel type: electric, mast type: duplex, battery voltage: 80 V, total height: 2,640 mm, total length: 2,980 mm, total width: 1,470 mm, color: other, Equipment: seat heater, Year of construction: 2020 Empty weight: 7.292 kg Battery type: PzS Lifting capacity: 4.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Beacon(s) - Blower - Work lamp(s) = Remarks = General Country of production: Duitsland Bodpfx Ajztr Anjfmslp Battery from model year 2025!, Hydraulic fork positioner, 1600mm forks, enclosed cabin with heated seats

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,446 h, clamping force: 2,600 kN, screw diameter: 60 mm, overall weight: 22,300 kg, controller manufacturer: ENGEL, controller model: CC300, product length (max.): 8,780 mm, Electrical injection moulding machine manufactured in 2015. This Engel e-victory 1640/260 features a clamping force of 2600 kN and an injection unit of 1640. It includes a tiebarless clamping system and a servo-electric injection system for high efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel e-victory 1640/260 machine we have for sale. Contact us for further details. • Max swept volume cm³ 792 • Screw speed max r/min 250 • Injection rate cm³/s 765 • Spec. Injection pressure bar 2330 • Injection unit: 1640 • Injection system: Servo-electric, high execution • L/D ratio: 24 • Clamping system: Tiebarless ENGEL clamping system • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Hydraulics: ECODRIVE SHV1 (1 demand-regulated servo pump) • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 164 kW • Centering: 160 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 8 on stationary platen with Venturi nozzles and pressure switches • Pneumatic mold valve control: 2-fold FESTO, up to 16 bar • Mold heating: 16 control zones, max heating power 25 kW • Nozzle radius: 15 mm • Nozzle bore: 4 mm Bjdpfxsz Dgrps Afmslp • Nozzle contact stroke: approx. 405 mm • Hydraulic tank capacity: Main tank approx. 490 l, suction tank approx. 220 l • Robot interface: Euromap 67 / AN-146 • Additional equipment • MuCell package: • Complete MuCell Basic Package • PM cold-work steel screw Ø 60 mm • Hydraulic needle shut-off nozzle • Melt pressure sensor • Trexel auxiliary equipment: SII VC 30, MIK 1060 SII • Frame for two 50 L gas cylinders • Mold temperature control: 3 ENGEL flomo distributors (24 monitored circuits total) • Including GEKU robot

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering a top-quality Jungheinrich forklift; it underwent a complete "5-Star" refurbishment by Jungheinrich in 2021 and has logged only 45 hours since that time. The paintwork is original and has not been repainted or touched up! The forklift has always been stored indoors and is in excellent condition. Maintenance and safety inspections (UVV) are up to date. The manual and keys are, of course, included. Last major service: October 2024 Safety inspection (UVV) valid until: 10/2025 Operating hours: 7,792 (7,744 since refurbishment) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-Star refurbishment: 03/2021 (complete), including Kaup fork positioner T466 Load capacity: 4,000 kg Bljdpfx Afjzn Uv Tsmjp Lift height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: Triplex mast including full free lift Equipment: Solo-Pilot control, road-legal lighting (StVZO), LED lighting (2 front and 2 rear work lights), front/roof/rear cab windows Steel doors, leather seat, rearview mirror, armrest, auxiliary hydraulics (2 functions) Kaup fork positioner (NEW): 4.8T 466B The vehicle has run for only 45 hours since its refurbishment; all safety inspections and maintenance work have been carried out. Please feel free to contact us if you have any further questions!