Used Swing Saw for sale (8,327)

Condition: used, Storage location: Nattheim Bdjdpfx Alsynttfjtod

Condition: used, Year of construction: 2024, New machine – Special price – Year of manufacture 2024 HAND GUARD Edition Single Flex unit. The image shows the system. HAND GUARD is based on early hazard detection to protect the operator from injuries and works in any application. The camera-monitored system first gives a visual warning to alert the user to an impending danger. If the hazard persists, the saw blade is lowered without causing any damage to the machine or material. HAND GUARD supports the processing of various materials such as wood, metal, and plastic. • Contactless and injury-free • Quick commissioning • 100% damage-free • Operates with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter can be fully retracted under the one-sided tilting saw unit as standard. Tilting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and tilt adjustment with a maximum saw blade protrusion of 179 mm (removal of the scoring unit may be required in some cases). Additionally, the control unit is positioned at eye level, allowing you to adjust the blade height and tilt, as well as, depending on the control package, the RPM and other functions. The new, clear industrial design marks the exceptional status of the Altendorf brand: This sliding table saw combines distinctive design with timeless aesthetics. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be locked steplessly in any position. The large double rollers keep the upper carriage absolutely precise in connection with the lower carriage within the respective guide rods. This running quality is maintained for decades, even under heavy use and contamination. The carriage construction is extremely torsion-resistant and dimensionally stable. An additional front support roller with a width of 300 mm is included, offering valuable support for cutting long workpieces on the rip fence. Positionable at 90° under the double roller carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction at the rip and angle fence when tilting the saw unit • Stepless fine control of the axes via +/# keys • Easy axis calibration • Machine diagnostics, operating hours counter, USB interface • Recall last dimension entry (back function) • Conversion of pointed to blunt measurements at the rip and angle fence • Shear cut function with automatic calculation of missing angles or dimensions • Advanced tool management for up to 100 tool memory slots • Storage of scoring position (3-axis scorer) • Input for main blade core thickness & cutting width • Input for main tool speed Additional functions • Grooving: automatic step-by-step positioning of the rip fence • Chain dimension function: cutting sequences with identical distances at the rip fence • Oversize angle cut • Calculator function with result transfer to the axes • Geometric shapes, calculation of missing angles or dimensions • False miters, calculation of missing angles or dimensions • 9999 storable cutting programs • Standard provision for remote maintenance • Template holder directly next to the touchscreen Included accessories for Edition Single Flex: • Double roller carriage with carriage length of 3000 mm • Vario drive 5.5 kW (7.5 HP) VAR Bjdpjyyap Ejfx Altodd

Condition: used, Year of construction: 2001, Max. cutting width: 4300 mm, max. cutting height: 2200 mm, saw blade diameter: 300 mm, max. processing thickness: 80 mm, saw blade bore: 30 mm, measurement system: scale, saw head tilting: manual, saw feed: manual, extraction: external extraction, saw beam locking: manual, weight approx.: 1200 kg, dimensions: 5300 x 1200 x 2900 mm, motor power: 5.5 kW. Storage location: supplier. Bodpfsy Idb Ujx Altedd

Condition: used, Year of construction: 2006, Motor-adjustable parallel fence Bedpfx Aljzawiuotsdd Lengthwise stop with display One-sided motorized pivoting Sliding carriage 3000 mm 5.5 kW Scoring saw Location: Nattheim

Condition: excellent (used), Year of construction: 2020, power: 1.5 kW (2.04 HP), total height: 2,000 mm, total length: 1,930 mm, total width: 1,610 mm, Band saw PILOUS - ARG 235 Plus Bandsaw mitre cutting left & right Ø 235 Optional roller conveyor D-300 x 2000 mm = EUR 550(6 rollers / 60 diameter / 300 Kg load 1 Mtr)  Optional roller conveyor D-300 x 3000 mm = EUR 650(10 rollers / 60 diameter / 300 Kg load 1 Mtr.) Capacity 90°: 235° Cutting flat 90°: 280 x 180mm Capacity L 45°: 185° Capacity R 45°: 115° Cutting speed Vario:40 + 80 Circle blade size: 2710 x 27 x 0,9mm Bsdezc Imiopfx Altodd Power: 1,5kW Length: 1930mm Width: 1610mm Height: 2000mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2020, power: 1.4 kW (1.90 HP), control type: NC control, total height: 2,000 mm, total length: 1,900 mm, total width: 1,800 mm, Band saw PILOUS - ARG 260 Plus Bandsaw mitre cutting left & right Ø 260 MACH-ID 6223 Make: PILOUS Type: ARG 260 Plus Year: 2020 Optional roller conveyor D-300 x 2000 mm = EUR 550(6 rollers / 60 diameter / 300 Kg load 1 Mtr) Optional roller conveyor D-300 x 3000 mm = EUR 650(10 rollers / 60 diameter / 300 Kg load 1 Mtr.) Capacity 90°: 260° Cutting flat 90°: 300 x 200mm Capacity L 45°: 175° Bjdpfx Alozc Il Eetodd Capacity R 45°: 200° Cutting speed Vario:35 + 70 Circle blade size: 2880 x 27 x 0,9mm Power: 1,4kW Length: 1900mm Width: 1800mm Height: 2000mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2008, functionality: unexamined, overall weight: 5,950 kg, working range: 4,500 mm, type of input current: three-phase, working height: 105 mm, We offer this used Gabbiani Galaxy 105T BR panel saw, year of manufacture 2008. Bedpfx Aljy Hccbetodd Brand: Gabbiani Macchine Type: SEZ. MÖN. MT Model: GALAXY 105T BR Year of manufacture: 2008 Serial number: GA1/002979 Weight: 5,950 kg Voltage: 400 ~3/N V Current: 44 A Frequency: 50 Hz Short-circuit current (Icc): 10 kA If you have any questions or would like more information, please feel free to send us a message or call us.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2686017, For sale is a steel cutting machine from ROTOX, type SZA268, manufactured in 2020. The ROTOX SZA268 is an automatic sawing machine used for cutting steel rectangular tubes and steel profiles with a wall thickness of up to 4 mm. The 90° sawing unit with hydraulic feed enables precise cuts, which can be performed either parallel to a ROTOX PVC cutting line or according to a cutting list. The length positioning is controlled by a servo axis, and the machine features a PC control and a profile-independent clamping system for flexible operation. Technical data: Dimensions: Machine width: approx. 12.5 m without protective fence Machine depth: with 10 mm table: approx. 2500 mm without protective fence with 20 mm table: approx. 3500 mm without protective fence Machine height: approx. 1900 mm Weight: approx. 2560 kg incl. feeding magazine for 10 reinforcing bars and removal table with pusher Cutting angle: 90° Cutting length min / max: 250 / 3500 mm Usable tools: All saw blades must comply with EN 847-1 and be approved for the speed of the saw motors. Saw blade: Ø 450 x 4.0 x 50 mm, Z300 Material to be processed: Steel or aluminum reinforcing bars for window construction Bar length min / max: 450 / 6500 mm Profile height min / max: 7 / 80 depending on the contour mm Profile width min / max: 28 / 80 depending on the contour mm Electrical: Mains connection: 3/N/PE~ 50 Hz 230/400 V ± 5 % Power: 2.4 kW Rated current: IN= 16 A Fuse: B 16 A Mains connection cable (type): H05RR-F 5G2.5 qmm Protective conductor: 10 mm² Cu Saw motor: 230/400 V; 50 Hz; 1.5 kW; 5.7/3.3 A Output speed: 65 1/min Lubrication: 0.6 l mineral oil CLP 220 Pneumatics: Operating pressure: 7 bar Limit pressure: min. 6 bar (also during operation) max. 8 bar Compressed air quality: ISO 8573-1: 2010, Class 7.2.4 Pressure switch: Warning pressure 6 bar / Shut-off pressure 5 bar Air consumption: approx. 60 l per cut Hose connection: Ø inner 9 mm Hydraulic linear drive Operating pressure: 160 bar Stroke: 200 mm Bdedpfx Aoziandjltjd Motor: 24 VDC; 500 W Workpiece clamping: Pneumatic Permissible ambient temperature during operation: min. 15 °C and max. 40 °C Operating manual available in digital format. Subject to prior sale, changes and errors.

Condition: used, Cutting height: Max. 100 mm (at 315 mm saw blade diameter) Saw blade swing: 0 to 45° (manual) Motor power: 4 kW (approx. 5.5 hp) Trimming table (sled): 1600 mm standard Bsdozflv Sepfx Altodd Cutting width: default 1000 mm on the parallel stop

Year of construction: 2000, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Pivoting material stop with locking points and digital display Bsdszfkwbepfx Altedd Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 TECHNICAL DATA Wheel diameter 500 mm Belt speed 1300 m/min Cutting height 330 mm Cutting width 480 mm Blade length max. 4140 mm Saw blade width min. / max. 15 mm / 25 mm Optional, with special coating: saw blade width min. / max. 6 mm / 20 mm Table size 670 x 495 mm Table height 900 mm Dust extraction port 2 x Ø 100 mm Motor power 1.5 kW / 2 HP Special voltage: 400 V / 50 Hz Color RAL 7035 light gray and RAL 5000 violet blue Net weight approx. 210 kg TECHNICAL DESCRIPTION Solid German engineering Machine stand in aesthetically pleasing, modern, torsion-resistant, double-chambered, welded steel construction Upper and lower doors secured via limit switches Upper and lower precision band saw blade guides APA 2, size 1 Finely planed gray cast iron table Tilting table top up to 45° Dynamically balanced band saw wheels with vulcanized rubber tires Fence rail on the left of the saw blade, can be used Fence profile can be folded down Blade tension indicator 1 saw blade 4140 x 20 x 0.45 mm, tooth spacing 6 mm, No. 3783.20K Mechanical height adjustment of the saw blade guard via handwheel with locking ratchet Push-button switch for start/stop with emergency stop button and motor protection relay Wear-free, electric motor brake CE compliant GS tested Machine stand, left-hand version Drive motor 1.5 kW / 2.0 HP Bsdpfx Alev Huggjtodd Weight approx. 210 kg Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 TECHNICAL DATA Wheel diameter: 800 mm Belt speed: 1800 m/min Cutting height: 520 mm Cutting width: 780 mm Max. blade length: 5775 mm Min./max. blade width: 15 mm / 40 mm With special lining (optional), min./max. blade width: 10 mm / 35 mm Table size: 1145 x 760 mm Table height: 930 mm Extraction port: 2 x Ø 120 mm Motor power: 4 kW / 5.5 HP Bdodpfsww Ravsx Altsd Voltage: 400 V / 50 Hz Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 525 kg TECHNICAL DESCRIPTION Robust German engineering Machine frame in a modern, visually appealing, torsion-free double chamber steel welded construction Upper and lower doors protected by limit switches Upper and lower precision bandsaw blade guides APA 2, Size 2 Finely planed cast-iron table Table can be tilted up to 45° Dynamically balanced bandsaw wheels with vulcanized rubber tyres Rip fence can be used on the left of the saw blade, fence profile can be folded down Blade tension indicator 1 bandsaw blade 5775 x 30 x 0.8 mm, tooth pitch 9 mm, No. 3780.30I Mechanical height adjustment of blade guard by handwheel with locking ratchet Cam switch with star-delta starting and emergency stop button Mechanical motor brake with main switch and motor protection relay CE compliant GS tested Machine frame, left-hand version Drive motor: 4.0 kW / 5.5 HP Push-button control, 3 to 4 kW With automatic star-delta start (for 3.0 – 4.0 kW motor), (instead of cam switch) Availability: Short-term Location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture 2025 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Blade length max.: 4735 mm · Saw blade width min. / max.: 15 mm / 30 mm · Optional with special covering saw blade width min. / max.: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction nozzle: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German mechanical engineering · Machine stand in an attractive, modern, torsion-free double-chamber welded steel construction · Upper and lower doors secured by limit switches · Upper and lower precision band saw blade guide APA 2, size. 2 · Finely planed gray cast iron table · Swiveling table top up to 45° · Dynamically balanced band saw wheels with vulcanized rubber bandages Bsdpfx Aovymg Eoltodd · Stop ruler can be used to the left of the saw blade, stop profile can be folded over · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE-compliant Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting sheet-type wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Base machine Completely welded frame with extremely high rigidity Precise guidance of the saw beam / saw unit for accurate cutting. Automatic feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw beam Sturdy saw beam guided on precision rails. Pneumatic latching of the saw beam in the upper and lower positions. Electric monitoring during vertical cuts Saw unit Smooth and ergonomic operation for plunging and retracting the saw unit. Plunge lever can be folded down from the upper position for precise entry. Generously dimensioned levers for easy swiveling. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-release chuck. View opening: riving knife can be retracted Automatic functions Automatic plunge, cut-through, retract, and stop or Automatic plunge, cut-through, retract, and return Shortened return travel (selector switch) The shortened return travel of the saw beam prevents unnecessary travel paths of the saw unit (short workpiece positioned on the right) Speed control: infinitely variable from 6 - 24 m/min Cutting depth: max. 60 mm Control panel Efficient operation of the machine. Ergonomically mounted at eye level. Lower workpiece support Stable, wear-free stainless steel support. Support up to the cutting line: narrow workpieces cannot tip or fall through. Extraction Effective extraction with two ports: saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lifting roller transport system: Manually raiseable and lowerable rollers for easy and gentle panel transport. Measuring tape For dimension display in horizontal cutting with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel Powerpackage The package consists of the following options: 1. TRK extraction system 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed regulation Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Incl. HW circular saw blade Ø 250 x 30 x 3.2 mm, Z 48, hollow-flat tooth TRK system according to CE guidelines SH 2200 (less than 2 mg fine dust/m³ of air) – mandatory for all CE-required countries (extraction system provided by customer) Pneumatic shifting grid Continuous shifting grid over the entire machine length for stable workpiece support. Automatically, pneumatically retracts during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. Digital measurement display for horizontal cutting on the control panel Incl. electric fine adjustment Display of: Absolute measurement from the lower workpiece support OFF-Set measurement from the middle workpiece support Series cuts from the top edge of the panel Saw blade compensation (saw blade thickness can be individually programmed) Bdodpsyuld Aefx Altsd If the unit is operated via the brake at the ba... (text cut off)

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Bdedpfx Alsw I U D Ejtjd Partnership Edition Technical Specifications: Cutting height: vertical: 0–2,150 mm, horizontal: 80–2,000 mm Cutting length: 5,300 mm Cutting depth: 80 mm (55 mm with clamps) Saw blade: Diameter 303 mm, bore 30 mm, Z=60 hollow flat-top tooth Blade speed: 5,000 rpm Required air pressure: 6 bar Measurement readout for horizontal cuts: - via scale from 0–2,070 mm - via strip cutting fence from 75–500 mm Measurement readout for vertical cuts: - via scale from 0–1,300 mm Extraction connection: 1 x 100 mm, 1 x 120 mm Features: - ADVANCE clamping system, consisting of 2 pneumatic clamping grippers, motorized on vertical axes via a ball screw, moving from top to bottom. The grippers handle panels weighing up to 150 kg. - Torsion-free, free-standing machine frame - Round bar guides, vertical and horizontal - Pneumatically retractable slat bed - Fine-adjustable flip stop with extension - Fine adjustment for horizontal cuts via handwheel - Strip cutting fence - Manual programming rail with 5 T-slot nuts - Pneumatic immersion of the saw unit - 25 material support rollers - 1 infeed and 1 outfeed roller - Pneumatic workpiece clamping device between the support rollers - 3 intermediate support elements, pneumatically extendable - Pneumatic saw head locking - Control panel with documentation holder - Switch unit on the saw unit: start button, stop button - Tool cabinet - Scale illumination for vertical cuts Partnership Edition Features: - Digital display for the flip stop - Digital display for the saw unit with incremental mode - Pneumatically tiltable saw unit - Scoring system with controlled counter-air nozzle, numerical display for scoring or grooving depth setting, and activation indicator - 5.5 kW motor including star-delta starter - Cutting line laser Availability: Short-term Location: Flörsheim

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Features and technical data: Cutting length: 5300 mm Cutting height: 2200 mm Max. workpiece thickness: 80 mm Motor: 5.5 kW Compressed air connection: 6 bar, 50 NL/min Extraction connection: 2 x 100 mm, 1200 m³/h Pneumatic aggregate locking Pneumatic aggregate penetration Digital horizontal display Availability: by arrangement Bjdpfx Aloxymd Hotodd Location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Blade length max.: 4735 mm · Saw blade width min. / max.: 15 mm / 30 mm · Optional with special covering saw blade width min. / max.: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction nozzle: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German mechanical engineering · Machine stand in an attractive, modern, torsion-free double-chamber welded steel construction · Upper and lower doors secured by limit switches · Upper and lower precision band saw blade guide APA 2, size. 2 · Finely planed gray cast iron table · Swiveling table top up to 45° · Dynamically balanced band saw wheels with vulcanized rubber bandages · Stop ruler can be used to the left of the saw blade, stop profile can be folded over · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button Bdsdpfx Ajw Nabloltjd · Mechanical motor brake with main switch and motor protection relay · CE-compliant Incl. transport pallet Incl. pre-freight to 65239 Hochheim Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW Bjdpfx Alew Nac Ajtsdd With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Condition: completely overhauled and refurbished Features and technical data: - Cutting area 4,200 x 2,100 x 50 mm Bjdpfx Aljwt E Uyjtsdd - CE mark - Rear full enclosure - Scoring unit - Complete with extraction hood and saw blade - Control panel on saw carriage - Reinforced 4 kW motor - With strip cutting device - Folding stops and aluminium central support - Retractable slatted frame for horizontal cuts Dimensions: approx. 5,250 x 2,700 x 1,350 mm Weight: approx. 750 kg Availability: short notice Location: Hesse

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement readout for: - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Round bar guide vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Bedpfx Aswka Ntjltedd Location: Flörsheim Availability: short-term

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Cutting plane directly on the saw blade Large-sized saw unit made of cast iron, double-mounted on the cast iron table – guarantees stability, precision, smooth operation, and long service life; 6-year HOLZKRAFT warranty on wear of the swivel segments Precision-guided format sliding table made of aluminum, anodized as standard 10-year HOLZKRAFT warranty on wear of the sliding table guide rails Parallel fence as standard with round bar guide and fine adjustment Large work table made of milled cast iron Smooth operation and precise cuts Standard table extension and table lengthening enable easy work with larger workpieces Extendable aluminum telescope fence with angle adjustment and two professional folding fences Made in Italy Motor 4.0 kW - 400 V Saw blade tilt 90 - 45° Format sliding table length 1600 mm Bsdpfxewb Eh No Altodd Table length 1020 mm Table width 325 mm Cutting width with parallel fence 700 mm Max. cutting height 90° = 100 mm Max. cutting height 45° = 79 mm Saw blade diameter 315 mm Saw blade speed 315 mm Max. crosscut width to the left of the saw blade 1660 mm Scoring saw blade diameter 80 mm Scoring saw blade speed 7600 mm Weight: approx. 276 kg Note! The parallel fence and table extension on the right are not visible in the pictures. Availability: short-term Location: Flörsheim

Condition: new, Storage box for carbide saw blades made of Trespa, white 15 compartments for saw blades max. 400 mm with recessed grips for inserting/removing saw blades L X W X H approx. 500 x 430 x 460 mm Availability: short term Bsdpfx Aonvkhholtedd Storage location: Hochheim

Condition: used, Year of construction: 2024, Used machine Year of manufacture: 2022 Commissioning: 8/2024 As-new condition The heavy-duty worktable made of highly ribbed grey cast iron and the base frame made of welded steel ensure high torsional rigidity and vibration-free operation. Smooth-running and precise sliding table made of anodised aluminium with proven, long-lasting ball contact system on hardened guides, 10-year warranty on guideway wear. Grey cast iron saw unit with permanently precise dual pivot segment guidance and zero-point tilt, 6-year Holzkraft warranty on wear of pivot segments. Equipped with a powerful three-phase motor. Saw blade tilt displayed on a scale at the unit. Bdjdpfxexua N Sj Altjd Large outrigger table with roller facilitates panel handling. Angle-adjustable aluminium telescopic fence with two professional folding stops. Folding parallel fence with quick-release and fine adjustment. Standard features include table extension, table widening, and eccentric clamp. Made in Italy Sliding Table and Worktable: Sliding table length: 2600 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 840 mm Worktable width: 560 mm Worktable height: 900 mm Saw Unit: Cutting width with parallel fence: 900 mm Maximum crosscut width left of saw blade: 3200 mm Ripping length: 2660 mm Saw blade tilting range: 90 - 45° Maximum cutting height at 90°: 100 mm Maximum cutting height at 45°: 70 mm Note on max. cutting height: Independent of scoring unit Saw blade diameter: 315 mm Note on saw blade diameter: Independent of scoring unit Saw blade speed: 3800 rpm Motor: 5.5 kW The hose visible in the picture is not included in the scope of delivery! Availability: Short term Location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Equipment and technical data: - Robust German engineering for trimming, crosscutting, sizing, miter cutting, etc. Bodpjw I Ummsfx Altodd - Operator controls placed overhead with swivel-mounted control panel at eye level, including template holder - 7" touchscreen control for electronically positioning cutting height, saw blade tilt adjustment, rip fence width stop, and optionally for scoring unit height and side adjustment; tool database for 50 saw blades and display of current RPM - Electromotoric height and tilt adjustment; saw blade tilt range from 0 – 47° - APA saw blade quick-release system; main saw blade RPM: 3000/4000/5000/6000 - Guard swings away on both sides, protective hood with interchangeable wide/narrow insert for saw blades up to Ø 450 mm - Rip fence with 1250 mm motorized cutting width - Sliding carriage with 3200 mm cutting length, lockable every 50 mm - Cross-slide with support roller and extendable support in both directions, mm scale length stop extendable up to 3500 mm, with 2 movable flip stops and 1 end stop; simultaneously usable as miter/fence stop, continuously adjustable from 0-46°, with automatic length compensation and index positions at 15°, 22.5°, 30°, 45° - Pushbutton control with electronic soft start (Start/Stop) - Electronic wear-free motor brake - Cutting length: 3200 mm - Max. cutting height: 155 mm at 90°, 105 mm at 47° - Motorized rip fence cutting width: 1250 mm - Cross-slide length stop extendable up to 3500 mm - Max. saw blade Ø 450 mm, Ø 400 mm blade can be retracted under the table - Cast iron table dimensions: 1200 x 665 mm; with additional table extension: 750 x 655 mm; table widening: 1430 x 940 mm - Table/working height: 900 mm - Extraction ports: 120 mm on machine body, 80 mm on protective hood - Motor output: 5.5 kW / 7.5 HP - Electrical supply: 400 V / 50 Hz - Sliding carriage, length and width fence profiles anodized - Machine body and swing arm powder-coated in anthracite RAL 7021; upper guard cover RAL 5000 violet blue; machine body RAL 7035 light grey - Required space: 7110 x 4150 mm - Weight: approx. 1050 kg, up to 1250 kg depending on configuration - CE compliant, GS tested, BG Wood Dust tested Special equipment: - Includes scoring unit 0.55 kW with electromotoric positioning for side and height adjustment via LED display and memory function; when the scorer is switched on, the unit automatically moves to the set position; when switched off, it automatically moves under the table to a side park position, allowing larger saw blades (over Ø 350 mm) to be used without removing the scoring blades - Includes MAIN SAW THREE-PHASE MOTOR WITH 7.5 kW (10 HP) instead of 5.5 kW - Includes Quickstep scoring system: Tool-free manual scoring width adjustment from 2.8 to 3.8 mm via index steps of 0.05 mm, incl. one set of saw blades 125 x 2.8-3.8 x 50 mm Z = 12+12 - Includes SWING-AWAY DEVICE FOR THE CROSS-SLIDE for quick and ergonomic movement to park position - Includes length stop with digital display on each stop flap, adjustable to 0.1 mm, max. length 3300 mm - Includes transport pallet

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: L'invincibile SI X - PANEL SAW WITH DOUBLE BLADE TILTING 931201 Frequency: 50 Hz 570348 Scoring unit with independent motorization 570351 LED lighting in the scorer area 530130 "Full Support & Wireless" 570353 Extension with roller track on the rip fence side 080999 Ex works R01264 L'invincibile SI X CE version 083202 Base 109993 MACHINE LANGUAGE: German 930731 Voltage: 400V EU 080685 Additional packaging Bjdpox Enrxefx Altodd 109999 Standard safety regulations Article number: SI X Variant: R021401 Availability: upon request Location: Flörsheim