Used Swing Saw for sale (8,286)

Condition: excellent (used), Casolin panel saw with scoring unit, 2004, table length 2000 mm Bodpfeyyuvgox Acvjwk

Condition: good (used), Year of construction: 1971, Esterer frame saw with many spare parts and at least 40 new and used saw blades. The gang saw is in a good, ready to use condition with minimal bearing play. Bwedpfxsncfiys Acvok After agreement the saw blade grinders can be sold with the saw.

Condition: ready for operation (used), Year of construction: 2014, saw blade diameter 350 x Ø 32.0 mm capacity degrees: flat 175 x 75 mm capacity degrees: square 110 x 110 mm capacity degrees: flat 100 x 80 mm Bwedsyu U Dfopfx Acvek capacity degrees: square 85 x 85 mm turning speeds 3000 U/min total power requirement 1.5 kW weight of the machine ca. 180 kg dimensions of the machine ca. 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : * left * right 0 / / - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the start button. 7) Press and hold the two SAW buttons, the material is sawn. 8) At the end of the cycle, release both SAW buttons and press the STOP button 9) Open the vice and remove or push the material forward * Special accessories included : - ALU chip extractor

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles, used Manufacturer: Weber - Kronach Type: PS 2 Year of manufacture: 2002 Profile section: max. 200 x 100 mm (W x H) Saw blade diameter: 400 mm Bjdpfxoyx Dx Ij Acvewk Connection load: 5,0 kW. Spannung: 400 V, 50 Hz Condition: very good, like new Remark: Very few operating hours

Condition: used, Year of construction: 2000, functionality: fully functional, Robland Z320 Sliding Table Panel Saw - YoM: 2000 Machine is in well used condition, but fully working. Machine would benefit from a good clean. £1,500 (GBP) + VAT. Bedpfx Ajynkm Necvswk 3200mm Sliding table saw. 1250mm Rip Fence x 3200mm Cross fence stops. Main Saw Blade Max Dia 400mm Scoring blade. Manual 0-45 Deg Blade tilt. Manual Rise and fall on blade. Manual adjustment of the Scribing blade.

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 3115, functionality: fully functional, empty load weight: 2,000 kg, feed length X-axis: 2,000 mm, saw band length: 4,870 mm, saw band width: 32 mm, TECHNICAL DETAILS Bandsaw blade length: 4,870 mm Bandsaw blade width: 32 mm Bandsaw blade speed: 110 m/min Cutting capacity (round): 340 mm Max. feed length: 2,000 mm Bwjdpfx Asyuaz Nscvek MACHINE DETAILS Control: Conventional Saw type: Automatic Horizontal/Vertical: Horizontal Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,850 x 1,800 mm Net weight: 2,000 kg Transport packages: 3

Condition: used, Elcon wall saw. Used, but in perfect working condition. Bwodpfx Acoykid Ssvek For sale due to business closure. Optional dust extraction system available for a small additional fee.

Condition: good (used), Year of construction: 1986, used, good condition Manufacturer: Altendorf Model: F45 Year of manufacture: 1986 Machine no.: 86-4-143 GS-certified Motor 5.5 kW Carriage length approx. 2500 mm Cutting width approx. 800 mm Tiltable up to 45° Saw blade diameter: 450 mm Parallelogram guard Bwedpfjyvv I Njx Acvek Mitre fence Extraction connection D 80 and 120 mm Space requirement approx. 2500 mm x 1600 mm x 1500 mm Weight approx. 1000 kg Location: ex stock 54634 Bitburg, free loaded, unpacked Handed over in the current as-inspected condition, without warranty or guarantee

Condition: used, This (GRAULE – cross-cut and mitre saw) is being auctioned online as part of our industrial auction / machinery auction ‘Everything Must Go! Machines, screws, surplus stock and various items!’. Bwjdpsyxd Snefx Acvok You can find this and many more lots on our platform.

Condition: good (used), Wood band saw, band saw machine, band saw, vertical band saw, bone saw, table saw, bone band saw, butcher's saw Bwsdpfx Aceyvrd Tovjk -Manufacturer: Reich, band saw, table saw with stand -Motor: Dietz 0.8 kW -Cutting width: max. 200 mm -Cutting height: max. 275 mm -Saw blade: Length 2200 mm -Dimensions: 830/720/H1715 mm -Weight: 114 kg

Condition: good (used), Year of construction: 1983, dimensions of the machine ca. 1210 x 1000 x 2070 mmxmmxmm weight - pallet system 1000 kg table-size 800 x 820 mm MÖSSNER SSF/501 Vertical Band Saw Table size: 800 × 820 mm Table travel: approx. 350 mm Bedpfsyxhg Aox Acvowk Cutting height under guide: approx. 400 mm Cutting width / reach: approx. 500 mm

Condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, Table saw, Saw unit: swivels 45° -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) -Cutting height 75 mm with saw blade Ø 250 mm (max. approx. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 850/850/H1310 mm Bodpfx Acsyvpm Ssvjwk -Weight: 176 kg

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Bwedpfxow Sy T Ho Acvok

Condition: used, Year of construction: 2009, Cutting length: 4200 mm Cutting width: 3200 mm Max. saw blade protrusion: with blade vertical at 0° = 70 mm with blade tilted at 45° = 50 mm Feed speed forward: 0-80 m/min. Feed speed reverse: 100 m/min. Weight: approx. 5400 kg. Motor power: 14 kW Scoring saw: 1.5 kW Tool: diameter: 350 mm bore: 30 mm Extraction port (bottom): 140 mm Extraction port (pressure beam): 100 mm Storage location: Supplier Bwsdpfxsyf Nu Te Acvsk

Year of construction: 1980, condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw -Manufacturer: Ulmia, circular saw type 1612SP -Motor power: 2.2 kW / 2800 rpm -Saw blade: Ø 280 mm -Sliding carriage: is available -Max. cutting height 70 mm -Miter cut: up to 45° -Length stop: up to approx. 800 mm -Dimensions 1000/1340/H980 mm Bsdpfx Acjf D H Hbjvjwk -Weight: 306 kg

Condition: good (used), Panel saw, table saw, heavy precision circular saw, metal circular saw, cold circular saw -Sliding carriage: 200 mm -Speeds: 90-4000 rpm Bodpfectvp Tsx Acvswk -Cutting width: 710 mm -Saw blade diameter: max. 260 mm -Max. Cutting height: 40 mm -Height adjustment -Transport dimensions: 1450/900/H1100 mm -Weight: 254 kg

Condition: used, Year of construction: 2005, power: 7.5 kW (10.20 HP), cutting height (max.): 170 mm, cutting width (max.): 1,100 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, height adjustment type: hydraulic, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, total length: 3,300 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,500 kg, Equipment: CE marking, No. 04528 Sliding table saw Martin T 73 BASIC Used, year of construction 2005 Sliding table 3000 mm Maximum cutting height 170 mm Maximum saw blade diameter 500 mm Saw blade bore 30 mm Cutting width 1100 mm Motor 7.5 kW Speeds 2800 / 4000 / 5500 rpm Hydraulic saw blade tilt 0° - 46° Hydraulic cutting height adjustment Circular saw ruler can be lowered Pneumatic saw shaft lock Cross table with fixed angle adjustment Length stop extendable up to 3300 mm Sliding table with stepless locking Integrated contact for controlling the dust extraction system Central lubrication point Bwodpfxsyymtdo Acvjk Transport dimensions approx. 3300 x 2000 x 1800 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: good (used), Year of construction: 2021, pivoting range: 60 °, Equipment: CE marking, – Year of manufacture: 2021 Bwodpoyxx Uwofx Acvjk – 2 speeds: 36/72 m/min – Mitre cuts up to 60° – Saw pressure hydraulically adjustable with CCS system – Quick-release vice – Cooling – Automatic shut-off – Saw blade: 2950 x 27 x 0.9 mm – Emergency stop – 400V

Condition: good (used), functionality: fully functional, – Length 420 cm – Emergency stop Bwodpfxjyxx H Tj Acvek – Documentation – 230V

Condition: used, Year of construction: 1998, cutting diameter / mm saw band length / mm cutting width / mm Bedpfx Acsyvkv Ujvswk KASTO SBA 280 AU-CC band saw Cutting capacity: 5 kW Machine weight: 1,750 kg Year of manufacture: 1998 Note: The display is not functioning properly and dims during operation.

Condition: used, Year of construction: 1994, power: 5.5 kW (7.48 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 95 mm, saw blade diameter: 300 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, actuation type: mechanical, rotational speed (max.): 4,000 rpm, total length: 3,200 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We are offering this used SCM SI320 panel saw, year of manufacture 1994. Bedpfsyybqqsx Acvowk If you have any questions or need more information, feel free to send us a message or give us a call. Unfortunately, the rip fence is missing.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: V 474260, functionality: fully functional, operating hours: 1,580 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 130 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 2,000 rpm, total length: 3,700 mm, total width: 1,950 mm, total height: 1,650 mm, overall weight: 1,250 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, Due to staff shortages or the closure of our joinery, we are selling our Martin T60 Classic panel saw with the following equipment: - Edging table length: 3700 mm - Cutting width: 1250 mm - Parallelogram cross-cut table T74! - Extendable support for parallelogram cross-cut table - Digital length stop T74 with 2-point contact and two stop elements - Second support for large panels - Parallel fence for the edging table, mountable on the second support - 3-axis scoring unit, electrically adjustable, T6027-a! - Infinitely variable speed control for the main saw blade, T6076-a! from 2000-5000 rpm - Extraction port upper D = 100 mm - Extraction port lower D = 120 mm - Manual eccentric clamp - DIN A4 document holder - 1 piece hold-down device and push stick - Approx. 10 pcs. carbide-tipped saw blades up to D=450 mm The machine is fully operational and can be thoroughly tested. Bwsdpfjyx Iy Aex Acvjk A 1.6 t forklift is available for side loading onto a truck. Sale includes invoice plus 19% VAT, ex stock Essen.

Year of construction: 1987, condition: good (used), machine/vehicle number: 108922, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 305 x 40 mm Bedpfjhz T Hfjx Acvswk cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 245 x 40 mm cutting speed: 10 m/min engine: 380 V, 1,7 kW space needed: 1100 x 1000 x 1900 mm weight: 700 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: 1258, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 80 x 80 mm Bwsdpfjh I Dvnjx Acvjk cutting speeds: 12,5 - 25 m/min forward feed speeds: hydropneumat. stufenl. regelbar cutting length: 5 - 1580 mm saw drive: 380 V, 1,8/2,5 kW space needed: 2300 x 1000 x 2800 mm weight: 940 kg

Year of construction: 2000, condition: used, machine/vehicle number: 97464, cutting length: min./max. bei 90° 330/5000 mm disk of circular saw-Ø: 450/500 mm min. cutting length at 90°: 330 mm space needed: 6760 x 1590 x 1700 mm weight: 1550 kg Bwjdpfxj Uir Eo Acvjk