Used Super Cut for sale (15,611)

Condition: repair required (used), functionality: not functional, Year of construction: 2000, operating hours: 50,000 h, machine/vehicle number: L00620269, Replaced LASMAC LC-1212 x III laser machine, not working could be renovated or would be suitable for spare parts and dismantling for scrap. Nwodow Dqt Nopfx Ac Ael

Condition: refurbished (used), functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input frequency: 500 Hz, workpiece length (max.): 3,400 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 200 mm, table length: 4,500 mm, table width: 2,300 mm, table height: 1,800 mm, table load: 500 kg, 5-Axis Waterjet Cutting Center equipped with: - integrated working tank - 4.200 bar full electric e-drive™ - 19” numerical control - abrasive pressurized tank Nwsdpfx Acjxbgvfj Ajl - cutting head - watercad-cam software accessories included - 5 axis ±55° interpolating system and touchwave ce-ramic™ - loading and unloading system - light laser barriers Included expenses: - Installation of the machine(s) - Machine full-load start-up - Practical training to BUYER’S staff on the machine functions

Condition: new, Year of construction: 2025, laser type: fiber laser, laser power: 6,000 W, working range: 6,000 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, We, Airtech Stickstoff GmbH, have been partners with Bodor Laser for 8 years. We offer customers cost-effective, up-to-date laser cutting machines that are economically viable. Comprehensive service as well as system setup with our own service team. German-language training is also part of our services. Top quality at top prices. - Operable with or without loading system; here you have two options: fully automatic with bundle storage or a semi-automatic that can transport several rods of long material. - Simple programming. - 3 machine types with tube diameters up to 120 mm-350 mm available Njdpfx Aswra Dysc Aowl - Laser power up to 12 kW.

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: 11022311032, sheet thickness steel (max.): 40 mm, sheet thickness aluminum (max.): 40 mm, table length: 3,000 mm, table width: 1,500 mm, workpiece weight (max.): 1,500 kg, TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Workpiece weight: 1,500 kg Sheet thickness, structural steel: 40 mm Sheet thickness, stainless steel: 40 mm Sheet thickness, aluminum: 40 mm Sheet thickness, brass: 16 mm Cutting heads: 1 Travel speed: 200 m/min MACHINE DETAILS Control system: CNC Total power requirement: 55 kW Extraction system/filter JNSK06 Nwedpfxezlg Hfj Ac Aol Extraction capacity: 6,500 m³/h Power consumption: 7.5 kW Number and type of filter cartridges: 6 Filter area: 120 m² Efficiency: 99.99% Space requirement: approx. 10,050 x 4,920 x 2,200 mm

Condition: good (used), Cutting machine EBA 551-06, Item no. L1121 Nwjdpfex Rclkjx Ac Ajl

Condition: good (used), Cutting machine Ideal 5560 Nwedpjx Sx A Uofx Ac Ael The machine comes from a government agency. Item no. L1122

Condition: used, Year of construction: 2017, machine/vehicle number: 0-303-21-0734, functionality: fully functional, operating hours: 19,436 h, input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, type of input current: three-phase, total height: 3,000 mm, total length: 14,000 mm, total width: 3,400 mm, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HOMAG VKS 250 cardboard cutting machine For sale is a HOMAG VKS 250 for the automated production of customized corrugated cardboard packaging. The system is designed for both series production and single-item production and enables cutting, creasing, and perforating in both longitudinal and transverse directions. The machine has been further modernized and expanded and is ideal for companies that want to produce packaging flexibly and according to their specific needs. Technical data / Features: 8 real + 8 virtual longitudinal tools 1 transverse tool automatically adjustable tools Multi-line processing automatic 5-position endless cardboard changing system, 3 of which are side-by-side intelligent remaining length management Infeed width: 350–2,500 mm Cardboard thickness: 2–7 mm Processing of 1- and 2-ply corrugated cardboard Longitudinal cutting tolerance: max. 0.5 % Nsdpfszv S Snox Ac Aswl Transverse cutting tolerance: max. ± 2 mm Working height: 900 mm IntelliCut machine control HOMAG powerTouch multi-touch control panel PLC control and industrial PC automatic production according to production lists Connected load: 4.5 kW Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Space requirement approx. 10,500 × 3,400 × 3,000 mm Weight approx. 2,800 kg Further information on condition, modernization and price available upon request.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, The Autobyte 3602D is the automated cutting system for professionals who demand speed, accuracy, and efficiency. Equipped with premium Morso guillotine blades, it delivers perfect 45° corners in wood, plastic, and MDF—consistently, every time. With a capacity of over 500 frames per hour, you can significantly increase your production output. At the same time, you drastically reduce material waste: just 1 mm cutting loss per cut, compared to up to 6 mm with conventional saws. Smart automation features include: Automatic loader handling up to 13 lengths Nedpfew U D E Eex Ac Aowl Precision clamping system for maximum stability Integrated splitter to sort cut pieces and remove waste automatically Full control via a Mitsubishi touchscreen and PLC system, combined with reliable SMC pneumatics. The result: higher output, lower waste, and consistent premium quality—exactly what your production line needs.

Condition: new, Year of construction: 2025, Airtech Stickstoff has been representing Bodor Laser in Germany for several years. Our experienced team of service technicians installs the machines and provides training in German. Are you interested in our laser cutting machines? We look forward to your inquiry... Nsdpfowzv Dnex Ac Aewl

Condition: new, The cutting angle can be continuously adjusted manually within a range of 90° to 45°. Highly precise material feed, even with multiple feed cycles when cutting longer workpieces. Individual feed length: 500 mm. High feed rate possible while maintaining maximum accuracy. The 7.5-inch color touchscreen enables simple and intuitive control of all machine functions. The control unit allows programming of up to 60 programs for quick adjustment of the feed length. The machine can be controlled fully automatically, semi-automatically, or manually. The standard equipment includes control of the feed pressure, a stationary clamping device, and the feed rate. A frequency converter enables continuous adjustment of the saw blade speed within a range of 15-90 m/min. Cutting range examples: Nwsdpfx Aoztva Dec Aol 90° round: 260 mm 90° square: 245 mm 90° rectangle: 245 x 250 mm +45° round: 180 mm +45° square: 170 mm +45° rectangle: 180 x 120 mm Including: Coolant system Pressure gauge for saw blade tension Mechanical saw brush Material slide

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, The machine is unused! TECHNICAL DETAILS Rotor: Open rotor Grinding mechanism: 650 mm × 550 mm Application: Grinding of, for example, lumps MACHINE DETAILS Power: 22 kW Voltage: 380 V Frequency: 50 Hz Current consumption: 42.5 A Nwjdpezr Hzisfx Ac Ael Speed: 1,470 rpm Protection class: IP55 Insulation class: F Operating mode: S1 – Continuous operation Sound level: 71 dB(A) Weight: approx. 190 kg EQUIPMENT Control system Star/delta connection possible Spare parts can be supplied for an additional charge.

Condition: new, Year of construction: 2026, Transverse and longitudinal cutting line: - Numerical control - Up to 6 rotating knives for thin thicknesses - Up to 3 rotary knives for 1.5mm thickness - Digital ruler Nodpfx Acjzxg Sbo Aowl - Sheet plasticizing unit - Compact line with 3 straightening rollers - Automatic unwinder

Condition: used, mileage: 153,784 km, power: 338 kW (459.55 HP), first registration: 06/2024, fuel type: diesel, empty load weight: 8,344 kg, maximum load weight: 9,656 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 06/2026, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, navigation system, parking heater, Scania Approved, color: White, unladen weight: 8344 kg, permissible total weight: 18000 kg, 1st axle: 385/65 R22.5, 2nd axle: 315/70 R22.5, seats: fabric, interior color: anthracite, leaf-air suspension, tilting hydraulics, retarder, fifth wheel coupling: JOST JSK37C-W 150, -660 mm, electronic braking system EBS, electronic stability program ESP, automatic climate control, auxiliary climate control, adaptive cruise control ACC, driver's seat with air suspension, seat heating, LED headlights, automatic headlight control, headlight range adjustment, radio, Bluetooth hands-free system, lane keeping assist, rain sensor, leather steering wheel, adjustable steering column, sunroof, roof spoiler, fog lights, exterior mirrors: electric and heated, curb mirrors: heated, wide-angle mirrors, immobilizer, central locking with remote control, wind deflectors, refrigerator box, axle load indicator, hill start assist, LED daytime running lights, connector: 1x15-pin, eco-driving function, telematics system, upper and lower bunks, EGR, SCR, formerly a rental vehicle, non-binding offer, errors and prior sale excepted. Image may not match the offer. Nsdpfx Acszwhqpj Aowl

Condition: used, Year of construction: 2021, controller manufacturer: Siemens, controller model: SINUMERIK 840D SL Steuerung, _____ Description: Year of manuf. : 2021 Power : 4 kW Standard equipment Working area:4000 × 2000 mm Control cabinets:Integrated Drive technology:Gantry combined with linear direct drives Waste removal:Longitudinal conveyor belt Positioning laser diode:Included Spray system:Included Automatic nozzle cleaning:Included Features :- NitroLine :- AdjustLine :- ControlLine :- FlyLine :- FocusLine :- FastLine :- PierceLine :- Brass cutting set :- Copper cutting set Njdpfx Aozxwdhjc Aswl Laser TruDisk 4001 :- Power 4 kW :- BrightLine Fiber :- High-Speed Cutting Package :- Power Package for Fusion Cutting Additional machine functions :- Drop&Cut :- Integrated camera 1 for process monitoring Additional cutting packages :- High-speed Eco cutting package :- Pneumatic cutting Technical specifications Simultaneous operation:170 m/min Average positioning deviation (Ps):0.03 mm Positioning deviation (Pa):0.05 mm Minimum programmable step:0.001 mm X-axis:4000 mm Y-axis:2000 mm Z-axis:116 mm Maximum workpiece weight:2000 kg Structural steel:25 mm Stainless steel:20 mm Stainless steel (extended):35 mm Aluminium:20 mm Copper:8 mm Brass:8 mm Software:incl. software licence

Condition: used, Cut-to-length and separating machine Nwsdpfx Aszxrwpsc Ael Manufacturer: Pfister AG Type: DUOSCHLIFF 2200 Year of manufacture: 1995 Max. workpiece length: 500 mm For the production of: - Cylindrical ejector pins with a stepped design - Flat ejectors - Profile and hole punches - Ejector sleeves

Condition: used, Year of construction: 2007, functionality: fully functional, working width: 150 mm, planing height: 50 mm, spindle diameter: 40 mm, planing width: 150 mm, working height: 50 mm, - after technical inspection - German manufacture - year of manufacture: 2007 - equipped with Weinig EM 15 belt feeder TECHNICAL PARAMETERS: - planing width: 150 mm - planing height: 50 mm - spindle diameter: 40 mm - first bottom head: 11 kW at 6000 rpm - second top head: 22 kW at 7000 rpm - third bottom head: 5.5 kW at 6000 rpm - feed motor: 2.2 kW - feed speed adjustable via inverter - feed via cardan shafts - four upper steel feed rollers - one upper rubber outfeed roller - grooved table surface - infeed table length: 1000 mm - automatic central lubrication Nwodpfew E I Rusx Ac Ajl - feeding table length: 4700 mm - feed speed adjustable via inverter - hydraulic pressure rollers - total feeder power: 2.25 kW - machine dimensions (L/W/H): 790 x 200 x 190 cm - weight: 3200 kg

Condition: good (used), Year of construction: 1988, Saw blade dimensions: 275 x 3.3 x 40 mm Cutting capacity for straight cuts: Profiles and angles/pipes/solid material: 65 x 130/90/60 mm Nedpozvw Uhjfx Ac Aewl For miter cuts: Flat profiles and angles/pipes: 75 x 90/90 mm 2 saw blade speeds: 2000/4000 rpm Drive motor: 380 V, 1/1.2 kW Space requirement: 750 x 450 x 750 mm Weight:

Condition: used, Year of construction: 1992, functionality: fully functional, power: 330 kW (448.67 HP), control type: PLC-controlled, actuation type: hydraulic, For sale is a used Quattro Spaner bandsaw, Super 40 model, manufactured in 1992, consisting of: - Spaner - Centering unit - 4-bandsaw system Super 40 Nwodpfx Aezvx Shoc Ael This system is particularly suitable for the efficient cutting of light to medium-strength round timber and enables precise and efficient processing in a compact design. Technical data: Max. round timber diameter: 58 cm → Debarking up to 42 cm Min. round timber diameter: 13 cm → Debarking up to 8 cm Feed rate: up to approx. 59 m/min → Reduced to approx. 20 m/min for large cross-sections Daily output: approx. 250–300 cubic meters/day → Depending on round timber diameter and cutting Condition and previous use: The system was in operation at a sawmill with an annual production of approximately 50,000 cubic meters in a single-shift operation until summer 2025. It was regularly maintained until it was taken out of service and was fully functional. However, due to its age and for reliable long-term operation, a complete overhaul is necessary. An inspection of the system for sale is possible by arrangement. An identical Quattro system, which has already been completely overhauled, can be inspected on-site during ongoing production. This allows interested parties to gain a clear picture of the system's performance and potential applications after an overhaul (see photo). Price on request. We will gladly send further technical information as well as photos and videos upon request. Inspection is possible after prior appointment.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 850 kg, fuel type: diesel, color: yellow, power: 22 kW (29.91 HP), output current: 39 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 22 kW (29.91 HP), nominal power (apparent): 28 kVA, continuous power: 22 kW (29.91 HP), continuous power (apparent): 28 kVA, total length: 2,100 mm, total width: 950 mm, total height: 1,200 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei STAGE V, type of cooling: water, HELVETICA POWER offers: 22 KW 28 KVA generator / diesel generator ⭐️ Stage V (EU) / Euro 5 compliant - suitable and approved according to the current emission standards for Europe. ⭐️ In an oil-tight chassis, e.g., for construction sites, industry, agriculture, and much more. ⭐️ CE-compliant according to applicable regulations. ⭐️ Soundproof (Super Silent) version. ⭐️ With an emergency power changeover switch / ATS (Automatic Transfer Switch) for emergency power operation. ⭐️ Digital control + built-in remote control. ⭐️ Yunnei Stage V diesel engine suitable for continuous operation. ⭐️ Stamford type (CN license): "CE" certified, high-quality synchronous alternator "brushless" with 100% copper winding. ⭐️ AVR system (load-dependent voltage regulation / Automatic Voltage Regulation). ⭐️ The generator is supplied with a very practical, sturdy yellow tarpaulin cover. Warranty / Guarantee / Service ⭐️ One year factory warranty! Nwsdpfszwfb Sox Ac Asl ⭐️ Optional: 2-year warranty / guarantee, which extends far beyond the usual (can be extended if required). ⭐️ Our insurance partner: Allianz Suisse / Allianz Germany (for Europe). ⭐️ Service available throughout Switzerland and Europe. Payment / Delivery ⭐️ Payment: upon purchase. ⭐️ Delivery possible throughout Europe (mainland) for an additional charge. 🚚 Collection: at the Kefikon (TG, Switzerland) or Konstanz (Germany) warehouse. 🚚 Worldwide delivery on request. 👍 Dealer inquiries welcome - contact us! ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ Other Models & Configurations ⭐️ Other power classes available (approx. 7 kW to 100 kW). ⭐️ Stage V (EU) / Euro-5 compliant versions. ⭐️ Alternative engine options possible (e.g., Cummins, Deutz, Volvo). ⭐️ Optional equipment: larger tank, additional tank, tank and water heating. ⭐️ Many variants available from stock in CH / DE. ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ Keyword list: generator, power generator, emergency power generator, emergency generator, power generator, energy generator, power unit, unit, mains replacement system, NEA, emergency power, backup power, backup electricity, power supply, power source, self-sufficient power supply, island operation, construction site power, construction site generator, event power, camping power, outdoor power supply, diesel generator, gasoline generator, gas generator, inverter generator, synchronous generator, asynchronous generator, three-phase generator, AC generator, 230V generator, 400V generator, high-voltage generator, small generator, industrial generator, professional generator, high-performance generator, quiet generator, silent generator, soundproof generator, mobile generator, portable generator, stationary generator, home emergency power, commercial power, industrial power, agricultural generator, construction site equipment, workshop power, server emergency power, PV emergency power, hybrid generator, ATS, automatic transfer switch, power distributor, CEE generator, high-voltage connection, generator with AVR, voltage regulator, power generator, power unit, emergency power unit, diesel unit, construction site unit 22 KW 28 KVA 30 KW 38 KVA 34 KW 43 KVA 44 KW 55 KVA 19 KVA 15 KW 38 KVA 30 KW 63 KVA 50 KW 125 KVA 100 KW 100 KVA 80 KW

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Work area lighting - Positioning laser diode Nwedjzv Sa Eopfx Ac Aol - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof + Nozzle changer

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel). Njdpfx Aotp Dhpoc Aowl  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) Nedpfx Acsvpalae Aewl ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 20,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, fiber laser cutting machine - NOW AVAILABLE power: 20000W table size: 6000x2500mm pallet changer Siemens controller with touch screen Siemens drives Precitec Procutter auto focus torch Max resonator chip conveyor offered with: warranty Nedpfx Acovzqpte Ajwl CAD CAM software setup delivery optional training this is a new stock machine and could be tested under power any time. please contact us

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, overall weight: 1,000 kg, High-performance and very attractive Polar 76 SD-P paper cutting machine complete with 3 blades, tools, and documentation 76 cm cutting width Nwsdpfozyagbsx Ac Aol 11 cm stacking height Hydraulic clamping pressure continuously adjustable from 150 to 2500 daN Minimum cut without guard plate: 1.5 cm Direct dimension input via keyboard, memory function Optical cutting indicator 400V/50Hz/1.5kW, dimensions 152x175xH140 cm

Condition: good (used), Code: 0246 Brand: OMGA Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Nodexztydspfx Ac Aswl Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600