Used Suction for sale (2,500)

Condition: used, Year of construction: 2006, Nominal volume flow: 4900 m³/h. Minimum volume flow: 3532 m³/h. Intake nozzle: 250 mm. Static pressure at Vmin: 2740 Pa. Air pressure connection: 8.5 bar. Motor: 6.5 kW. Nljdpfx Aozd An Nsbkjc Storage location: Nattheim.

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure cleaner with vacuum unit on hot-dip galvanized and painted high-quality steel frame with forklift slots. The following models are available:  Vortex Combi 400 or 1000 Sewer Whale - 55 l/min, 160 bar HD pump - 1260 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank  Vortex Combi 400 or 1000 Sewer Salmon - 60 l/min, 200 bar HD pump - 3600 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 50-80 m ½" high-pressure hose  Hose: 50-80 m ½" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 35 m ¾" low-pressure hose  Hose: 35 m ¾" low-pressure hose (included) FUEL TANK:  Capacity: approx. 13 l WATER FILTER:  With washable cartridge and drain valve  Filtration grade: 50 Mesh INCLUDED IN DELIVERY:  Multifunction radio remote control IMET; - On/Off motor; - On/Off bypass; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  400 or 500 l water tank made of polyethylene; ACCESSORIES AVAILABLE ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint, and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Stair cleaning unit;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles; Njdpfx Absfdkb Eskslc  Other accessories on request Other available models: VORTEX COMBI 400 Whale E = Fully electric  Vortex Combi 800 Cleaning D Cold water - 800 l sludge tank - 2750 l/min suction capacity - Diesel engines: Yanmar - 15 l/min at 150 bar - HD reel with 20m hose - Radio remote control on request

Condition: used, Year of construction: 2006, machine/vehicle number: OTW, Schmalz vacuum lifter with a load capacity of 125 kg Dimensions: 180x80 cm, suction pads are fully adjustable. These are porous and should be replaced. 4 suction pads, each with a diameter of 140 mm Nodpfx Abjy Hf Itekolc Connection: 400V 16A Good condition, see pictures Item location: 75053 Gondelsheim Shipment via freight carrier or collection by appointment only

Condition: used, • Can rotate and tilt • Weight – 170 kg • Load capacity – 150 kg • With Demag chain hoist Nljdpfxsyf Ecms Abkjc • Automatic suction cups • With pneumatic cylinder • 8 suction cups – 4 suction cups are continuously adjustable • 4 adjustable

Condition: used, • Type: DSH2/12V • Suction cup type: 150K • Year of manufacture: 2013 • Serial number: 84 Nljdpfx Abeywi Dmjkjc • Lifting capacity: 900 kg vertically/horizontally • Lifting capacity per suction cup: 150 kg vertically/horizontally • Can rotate and tilt • Includes battery for independent operation on construction sites

Condition: good (used), machine/vehicle number: 717872, Year of construction: 2024, Offer 26146 Technical data: Nledpfjzd Ryyox Abkjc - Load capacity, horizontal, with 2 suction plates: 750 kg - Suction plate diameter: 300 mm - Adjustable suction plate spacing, lengthwise, approx. 750 to 2420 mm - Adjustable suction plate spacing, widthwise, approx. 620 to 1220 mm - Overall height / hook height: 765 mm - Vacuum motor power: 0.3 kW - Connection: 230 V - Space requirement: W 1500 x D 350 x H 640 mm - Weight, approx.: 130 kg

Condition: used, functionality: unexamined, Self-propelled oil skimming device for removing oil from still and flowing bodies of water. Diameter approximately 1,250 mm Capacity up to 400 l/min. Nlsdpfxszbt Ics Abksc

Condition: used, Suction collector Suction bell -used- ----- Technical data ----- Nlsdou R Tb Uopfx Abkec Connection piece: 350 mm, Spigots: 5 pieces, nozzle diameter: 2x160,2x100,1x120 mm

Condition: used, Suction collector Suction bell -used- ----- Technical data ----- Connection piece: 300 mm, Nlodpfx Absu R S Uyoksc Nozzle: 5 pieces, nozzle diameter: 160 mm

Condition: good (used), first registration: 04/2007, color: blue, suspension: air, Year of construction: 2007, Equipment: ABS, = More options and accessories = - Air suspension = Remarks = Royen/Ipsam Sucking and blowing dry substances Engine Volvo Penta TWD 1031VE Turbodiesel Powerpack 2x SIHI Vacumpump 3000m3/H Wittig Cycloonblower T5CDL12L71 3 axle BPW air suspension Belgium registration = More information = Axle brand: BPW Suspension: Air suspension Rear axle 1: Tire profile left: 50%; Tire profile right: 50% Nsdpezbupnjfx Abkolc Rear axle 2: Tire profile left: 50%; Tire profile right: 50% Rear axle 3: Tire profile left: 50%; Tire profile right: 50% Technical condition: good Visual condition: good

Condition: used, first registration: 09/2010, color: orange, loading space volume: 20 m³, Year of construction: 2010, BEKKER LaGram Suction-Pressure Silo Semi-Trailer Year of manufacture: 2012 Complete, inspected dry bulk silo semi-trailer from Bekker LaGram, suitable for the pneumatic transport of bulk goods such as powders, granules, cement, lime, fly ash, and similar products. Technical data: • Bekker LaGram Suction-Pressure Semi-Trailer • Chassis: Renders ROC 16.30S • CAT C9 Diesel Engine • Engine number: OJSC25155 • CVS SiloKing 700/1100 Screw Compressor • Vacuum blower GM 25Sm / GM 150 Sm • Pratissoli High-Pressure Pump, KE Series • Pneumatic unloading system • Complete operating and maintenance manuals available • Ready for immediate use The semi-trailer is equipped with a powerful Caterpillar C9 engine in combination with a CVS SiloKing compressor and vacuum blower. This makes the system suitable for efficient loading and unloading, as well as the transport of dry bulk goods. Available with tractor unit DAF XF 105.410 Tractor Unit • Year of manufacture: 2010 • Euro 5 • Automatic transmission • Air conditioning • Cruise control • Electric windows and mirrors • Refrigerator • 2 beds • 2 large diesel tanks • Mileage approx. 569,104 km • Tires approx. 80% • Front axle: Leaf suspension / Rear axle: Air suspension • Type: XF 105.410 Space Cab The tractor unit and semi-trailer form a combination that is ready for immediate use for the transport of dry bulk goods. For further information, photos, or to arrange a viewing, please contact us. = Further information = Pump: Yes High-pressure pump: Yes Nsdpozbuphofx Abkelc Hoses: Yes

Condition: used, mileage: 518,000 km, power: 199 kW (270.56 HP), first registration: 05/2007, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro4, Year of construction: 2007, Equipment: ABS, air conditioning, Manufacturer Scania Model P270 4x2 Hvidtved Larsen 7000 L Year 2007 Condition Good Serial Number XLEP4X20005167807 Ref. nr. 128140 Reg. date: 15.05.2007 Hk: 270 Km: 518000 Gearbox: Manual Eurotype: 4 Diesel tank: 1 Nedpfx Abszc Dt Sskslc Tank liter: 300 L Cabin type: CP16 Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/55R22,5 - 315/70R22,5 Cover% left 60% - 80% Front suspension: Air Suspension rear: Air Toolbox: ? Total weight: 18000 Kg Net weight: 12500 Kg Load capacity 5500 Kg Manufacturer: Hvidtved Larsen Tank capacity: 7000 L with stamp High pressure pump: Uraca P3-10 High pressure capacity: 104 l/min 200 bar High pressure pump hours: 1522 Vacuum pump: Wittig RFW 200 Vacuum capacity: 20,600 L/min Vacuum pump timer: 8072 Remote control: ?

Condition: excellent (used), mileage: 133,000 km, power: 294 kW (399.73 HP), first registration: 12/2016, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro6, total length: 11,610 mm, total width: 2,550 mm, total height: 3,700 mm, loading space volume: 15 m³, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, - Brake booster - Remote-controlled central locking - Refrigerator - Air suspension - Air horn - Radio/CD player - Reversing camera - Sun visor - Toolbox - Xenon lighting - Central lubrication Manufacturer: WIEDEMANN Nljdpjza Id Nefx Abkoc Model / Sales designation: SUPER 1000 15 Equipment number: D/BAM/1666/T Factory No.: X OW 1000 1494 Year of manufacture: 02.12.2016 Equipment: Suction / pressure tank body ADR Sludge compartment – variable size, rear closure floor and front torispherical head made from stainless steel, material 1.4404, sludge tank in stainless steel, material 1.4404, auxiliary tipping device, sludge tank lid/ADR, sludge tank lid – hydraulically opening, central locking pneumatically operated, level indicator with scale at the tank bottom, lower suction connection with gate valve DN 125 reduced to DN 100, lower suction connection pneumatically actuated, upper suction connection with gate valve DN 125 reduced to DN 100, hydraulic telescopic piston, display of 3 pre-set piston positions, ADR equipment, tank code L4BH (without heat recovery), splash partition in stainless steel 1.4301, vacuum pump type CVS VACUSTAR 1600 – DN 100, overfill protection, vacuum pump cooling, oil separator and silencer, vacuum pump flushing device, vacuum system piping, safety fittings and fittings DN 125, suction hose reel 25 m DN 125, special spiral suction hose 25 m / DN 125, oil-resistant, transport hose reel 40 m DN 80 (side-mounted), suction and high-pressure (HP) boom, retractable suction and HP boom, water compartment – variable, water filling device, hand washing device, warm, level control – Plexiglas sight glass for water compartment, high-pressure pump type URACA P 345-60, HP system protection, high-pressure reel 220 m DN 25 or 180 m DN 32, at the boom, high-pressure hose 180 m DN 25, rubber (GrüloKan 250), large automatic winding device, pressure roller – large HP reel, meter counter, high-pressure reel 80 m DN 13, hydraulic, high-pressure hose 80 m DN 13, rubber (GrüloKan 250), water shortage protection, pneumatic system, three-stage hydraulic system, centralized lubrication system, hydraulic winch, electrical system, reversing camera system with 2nd camera, engine can be started from control panel, PLC/CAN-BUS control, control cabinet with display, radio remote control with display, equipment cabinet with single flap – one side, insert tubes for suction hoses, pump room sound enclosure, full side paneling, toolbox approx. 800x500x500 mm, stainless steel, 3 work lights (LED), 2 revolving warning lights – flashing version, operating hour meter for HP pump; operating hour meter for vacuum pump, compressed air connection, spring cable pull, ladder, ladder holder, shovel, broom, and manhole hook Next inspection dates: General inspection (HU): 01 / 2026 Section 57b test: 05 / 2025 Safety inspection (SP): 07 / 2025 GGVSEB/ADR inspection: 02.01.2026 Tank inspection: 12 / 2027 German registration In very good condition! Immediately operational Transmission Transmission: ZF, 16-speed manual transmission Axle configuration Front axle 1: steered Front axle 2: steered Rear axle 1: steered Weights Unladen weight: 21,952 kg Payload: 10,048 kg Gross vehicle weight: 32,000 kg Functionality Body make: Wiedemann Super 1000...

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 216 105, BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Nodpjhqmghsfx Abkslc Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

Year of construction: 2010, operating hours: 5 h, condition: used, functionality: fully functional, machine/vehicle number: 123456789, We are offering this used Wood's Powr-Grip MRT vacuum lifter, year of manufacture 2010. Manufacturer: Wood's Powr-Grip Model: MRT Year of manufacture: 2010 Condition: used Category ID: 681 Type: Woods Powr Grip vacuum lifter Original price: €7,800 Nledpsycwnisfx Abkjc If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Dimensions (approximate): 510 x 510 mm Inner tube diameter: 230 mm Njdpfxjlf Iz Ao Abkelc

Condition: used, Connections: 145 mm Main pipe: 310 mm Njdpfx Abolf Izmekjlc with 5 connections.

Condition: good (used), Year of construction: 2016, Esta welding fume extraction system SRF K10 FM IFA W 3 230 Volt, max. 950 m³/h, with automatic filter cleaning, suction nozzle 3 meters. Nlsdpfxey Uch To Abkjc

Condition: reconditioned (used), Year of construction: 2019, operating hours: 6,700 h, functionality: fully functional, machine/vehicle number: 3.9 - 1200C, type of input current: three-phase, input voltage: 400 V, filter area: 40 m², suction capacity: 1,500 m³/h, negative pressure: 3,000 Pa, compressed air connection: 5 bar, power: 3 kW (4.08 HP), extraction connection diameter: 200 mm, LM Ecocell 1500 Year of manufacture: 2019. 3 KW / 6 A / 50 HZ Type: 3.9 - 1200C - Equipped with DOL relay start in original LM control unit, with on/off and automatic start-up functions. - Price includes 9x 4.5m² NEW filter cartridges installed in the unit upon sale. - Price includes 1x NEW HEPA filter cartridge installed in the unit upon sale. - Equipped with compressed air cleaning system, Delta P controlled. Nledpex Rrlmefx Abkec - Ex works Soerendonk (NL), loaded on truck free of charge. Tested and operational, can be demonstrated in our workshop. - Sold as seen, no warranty. - Tested on site and in proper working order. - Testing and inspection possible.

Year of construction: 2010, condition: good (used), Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 -Side channel blower: Elmo Rietschle -Individual components: see photos Nodpfx Aey R S Twebkslc -Quantity: 1 device available -Dimensions: 530/520/H1120 mm -Weight: 56 kg

Condition: ready for operation (used), Local Exhaust Unit, Workplace Extractor, PlymoVent S-1, Used Machine,smoke suction,dust extractor,plymovent Manufacturer: PlymoVent Model: S-1 Nlodoxa Hldspfx Abkec Overall Dimensions: Width: 1600 mm Depth: 660 mm Height: 1510 mm Weight: 103 kg Year of Manufacture: 2001 Max. Airflow: 1400 m³/h

Condition: like new (used), functionality: fully functional, machine/vehicle number: Nilfisk Industriesauger R104 V 4031600000, R104 X Product number: 4031600006 Nlsdpjw D Upzefx Abkoc The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. Originates from a cleanroom manufacturing process, plastic granules. Industrial vacuum cleaner for compressible material. The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. • Reduces downtime through continuous cleaning • Compression and easy removal of the collected material • Dust removal from the work environment • Recycling of trimmings • Flexible due to different performance classes • Container sizes, maintenance-free • Simple monitoring • Unattended operation possible. Nilfisk industrial vacuum cleaner R104 V 4031600000 Article number: NILFISK-4031600000 R104 X Product number: 4031600006 The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. Industrial vacuum cleaner for compressible material The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop.

Year of construction: 1993, condition: good (used), Lifting capacity: 250 kg Includes shelf bracket Side arms are adjustable Height: 1115 mm Width: 1500 mm Depth: 600 mm Net weight: 50 kg Condition: good, second-hand Nsdpfjzb U Uqex Abkolc

Condition: good (used), Year of construction: 2001, Lifting capacity: 550 kg Nsdpfozb Uygox Abkelc 5 suction cups Height: 1200 mm Width: 2300 mm Depth: 300 mm Weight: 75 kg Condition: good, second-hand

Condition: used, Year of construction: 2013, Technical details: weight of the machine approx.: 300 kg electrics - voltage/frequency: 400 / 50 bei 3~ V/Hz power consumption: 750 Watt dimensions L x W x H: 1,5 x 0,8 x 2,6 m Nlodpfxou Nv Afs Abkjc Mobile compact filter unit with extraction arm. (Welding fume extraction and fume filtration). Range of application: MIG/MAG solid wire; various fume and dust applications. incl. extraction nozzle manufacturer Lincoln, type LFA 4.1 CPL BJ 2013; tube Ø 200mm; suction Ø 280mm; total length=3900mm; the head is equipped with illumination via light switch, manual rotary head for locking flap, on/off switch gas temperature 40°C / 100°F Suction capacity approx. 2000m³ mobile over 4 wheels, front braked *