Used Suction Fan for sale (5,968)

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory Ffsdpfx Afekm Rynsnou coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz Fjdpfxshp S Tro Afnsfu 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm Fjdpfexaal Rox Afnjfu motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surcharge (recommended) - Retrofit kit STAVO (dust pre-separation) - for FILTOO with spark protection and collecting tray Note : - The device is only used to extract dry dust / smoke - Read the operating instructions before using for the first time

Year of construction: 2010, condition: ready for operation (used), Volume flow: 1000m³/h, max. depression: 10,000Pa, motor power: 5.5kW, weight: 350kg. Ffjdpjhz Dx Ssfx Afnsu

Condition: new, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 6x2, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: air conditioning, cruise control, differential lock, hydraulics, onboard computer, permissible gross weight: 18,000 kg, fabric seats, leaf-air suspension, retarder: ZF Intarder, tachograph, PTO: PTO Mot. rear, 1 p.m., control without clutch, pump drive, electronic braking system (EBS), electronic stability program (ESP), stationary air conditioning, comfort seats, air-suspended driver’s seat, LED headlights, radio, audio interface, leather steering wheel, power steering, anti-theft alarm, electric windows, outside temperature display, electrically adjustable exterior mirrors, wide-angle mirror, immobilizer, central locking, sun visor, all-season tires, driver package, speed limiter, passenger seat: cinema with fabric upholstery, Adaptive Cruise Control with FCW and AEBS-3, lane change warning system, Goodyear, Emissions standard Euro 6 OBD-E, engine H6, fuel B7, automated transmission, TraXon, 12 gears, standard component arrangement, fuel tank left, Plus Guarantee–driveline–3 years–300,000 km, hook lift type V1 REPTO, PlugPlay, BB-CAN control, Sleeper High Cab design, chassis front: no floor plate, cab air-suspended, exterior sun visor, signal horns prepared, LED headlights and fog lights, additional LED lights cab roof prepared, two LED headlights for cab rear wall, revolving lights front cab prepared, windscreen with sun protection film, laminated glass with sun protection film, main mirror convex, no front mirror, no digital vision system by DAF, DAF Corner View 1,450.00 (x2), without roof spoiler, black mirror housing for cab, Crystal White steering wheel, leather, dashboard design: plateau, door trim: loosely woven fabric, driver’s seat: luxury air, armrests on both sides of driver’s seat, armrests on both sides of passenger seat, refrigerator and drawer, luggage compartment, safety net on both bunks, curtains with dividing curtain, luxury LED interior lighting, automatic cab climate control, integrated stationary air conditioning, accessory power supply: standard + 2x 40 A, ECAS remote control with extend... Ffodpfxoyigmrs Afnou

Condition: like new (used), The device is like new and has barely been used! It operates flawlessly. Fsdpfx Afex Tu Ehenefu

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Ffedpfjvxk Anjx Afnsu Storage location: Nattheim

Condition: used, Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type EC2-HS160M2-2 -Engine power: 15 kW / 2935 rpm -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 580 x 470 mm -Total dimensions: 930/820/H1220 mm Ffodpfx Afjrh Niaoneu -Weight: 395 kg

Condition: used, Centrifugal fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, exhaust, chip blower, high performance fan, metal chip extraction fan Fsderh Nidopfx Afnsfu -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type T3C 160M2-2 built in 2021 -Motor power: 15 kW / 2940 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 530 x 580 mm / 580 x 470 mm -Quantity: 2x blowers available -Price per piece -Total dimensions: 950/800/H1215 mm / 930/820/H1220 mm -Weight: 395 kg/pc.

Condition: used, Side channel compressor, side channel blower, vacuum pump, blower, dust extraction fan, exhaust gas extraction, welding fume extraction, suction, fan, pressure blower, vacuum blower, low pressure fan -Pressure blower: High pressure blower with transport rollers -Motor: elsto Type:ES 160M2A-40 H -Motor power: 11 kW / 2900 rpm -Volume flow: m³/min -Connection input: Ø 185 mm -Connection output: Ø 160 mm -Base plate: 800 x 250 mm Ffsdpfx Asrh Nitsfneu -Dimensions total: 1260/920/H1170 mm -Weight: 161 kg with pallet

Condition: good (used), axial fan, fan, exhaust, fan wheel, fan blades, fan blades -Fan wheel: fan blades for exhaust fans -Diameter: 900mm -Receptacle: Ø 38 mm -Quantity: 9x fan wheel available -Price per piece Fsdpfx Afjriicisnefu -Dimensions: Ø 900 x 85 mm -Weight: 16 kg/pc.

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas extraction fan, extraction filter system Ffedsryaliepfx Afnsu -Manufacturer:Oelde, extraction system, extraction filter system, type size 16 -Air flow: 22 m³/min -Engine: 1.85 kW -Speed: 2890 rpm -Individual components/technical data: see photos -Dimensions: 870/480/H1250 mm -Weight: 100 kg

Condition: good (used), Ventilator, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, smoke gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Ziehl-Abegg, radial fan type DKHR 280-2 -Speed: 2800 rpm -Power: 0.4 kW -Protection class: IP 44 Fedpfxeqpl Rxs Afnjfu -Quantity: 1 piece available -Dimensions: Ø 280 x 175 mm -Weight: 8.5 kg

Condition: used, Radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, , , ventilation fan, blower -Fan: centrifugal fan exhaust fan -Type: unfortunately without type designation -Voltage: 380V/3ph. / separate windings Ffedsq Dau Topfx Afneu -Speed: 550 / 750 rpm -Inlet: Ø 220 mm -Air duct connection: 190 x 145 mm -Dimensions: 410/380/H190 mm -Weight: 10 kg

Condition: good (used), Fan, blower, electric motor, blower, axial fan Ffedpfx Afepwnf Toneu -Manufacturer: ebmpapst, axial fan type 4656 N -Voltage: 230 V 19 W -Number: 1x fan included -Dimensions: 120/120/H35 mm -Weight: 0.5 kg

Condition: good (used), Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: Siemens, Simatic S 5 fan assembly from Demag D 100-275 NC injection molding machine -Type: 6ES5 981-0 HA 11 -Voltage: 230/115V Ffedpfsn Hbb Aex Afnsu -Dimensions: 490/175/H265 mm -Weight: 2.9 kg

Year of construction: 2010, condition: used, Centrifugal fan, chip extraction fan, fan, suction, chip blower, high performance fan -Motor power: 5.5 kW -Speed: 2895 rpm -Volume flow: 1060 m³/h Ffodpjn Srvyjfx Afneu -Connection input: Ø 200 mm -Connection output: Ø 115 mm -Dimensions: 775/1000/H1350 mm -Weight: 170kg

Condition: good (used), Fan, blower, electric motor, blower, axial fan Fjdpfx Ajfxg Nqjfnefu -Manufacturer: ebmpapst, axial fan type A2E250-AE65-17 -Voltage: 230 V 115 W -Speed: 2550 rpm -Dimensions: 258/147/H313 mm -Weight: 3.7 kg

Year of construction: 2015, condition: good (used), Fan, fan, electric motor, blower, axial fan, duct fan -Manufacturer: FläktWoods, axial fan type 31JM / 16/4/5/36 S / S 3 S BT4 Ffodpfxsgx Am So Afnsu -Motor: 380-420 V / 1370 rpm / 100 W. -Ventilation duct: Ø 315 mm -Hole circle: Ø 355 x 10 mm -Protection class: IP55 -Number: 1x fans available -Price per piece -Dimension: Ø 395 x 360 mm -Weight: 15 kg / pc.

Condition: used, Air outlet, ventilation duct, ventilation flap for ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, shutter flap, non-return flap -Slat fan: without fan, air outlet, lateral. Slats adjustable -Connection opening: Ø 800 mm -Dimensions: 1130/1130/770 mm Fsdpfx Afef S Nctonofu -Weight: 135kg

Condition: used, Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction, radial duct fan -Manufacturer: Maico, radial tube fan type ERR 12/1 -Voltage: 220V -Power: 62 W Ffsdpfx Afottnuwonou -Protection class: Iso-Kl.B G 42 -Connection input: Ø 120 mm -Connection output: Ø 125 mm -Fan wheel: Ø 330 x 170 mm -Dimensions: 420/270/H250mm -Weight: 3.5 kg/piece

Condition: used, Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan, suction fan -Manufacturer: Ziehl-Abegg, axial fan axial fan suction fan -Type: ... 500-4-4ADsp -Power: 0.42 kW / 1360/1050 rpm -Fan: Ø 500 mm -Quantity: 1x fans available -Price per piece -Total dimensions: 860/850/H180 mm Fedsquft Eopfx Afnofu -Weight: 21 kg/pc.

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: MA-VIB, fan blower radial fan type OS.120.201.4 -Engine power: kW -Speed: 2950 rpm -Volume output: /min -Fan wheel: Ø 120 x 30 mm -Connection input: Ø 135 mm -Connection output: 80 x 55 mm -Dimensions: 210/190/H200 mm -Weight: 3.1 kg Fodpfouqf Ulex Afnofu

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Radial fan -Motor: Besel type SKG71-2B 0.55 kW -Speed: 2810 rpm -Volume output: 18.5 m³/min Fsdpfx Asuqq Rlofnefu -Fan wheel: Ø 170 x 50 mm -Connection input: Ø 85 mm -Connection output: 60 x 75 mm -Dimensions: 350/300/H260 mm -Weight: 11.5 kg

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type DG 63 b -Motor: Dietz 0.125 kW 2845 rpm -Volume flow: 6 m³/min / 360 m³/h -Connection: inlet Ø 58 mm -Connection: output Ø 75 mm -Dimensions: 380/250/H360 mm -Weight: 9.2 kg Ffjdpfx Aot Rbhzefneu