Heater fan

Remko Promat 50 DP

Condition: new, Year of construction: 2025, Fully automatic labeller for bottles, cans, containers. PLC control, operation via touch monitor. Variable speed motors and conveyor chain board. - Specifications: label length: 6-260mm; label width (backing paper width): 10-150mm; bottle diameter25-130mm; inner diameter of the label roll: 76mm; max. outer diameter of the label roll: 300mm; label precision: ± 1mm; production capacity: max. speed of the machine in neutral: 40 cycles/minute; power: 220V, 50Hz/60Hz. Iedev Nk Sdjpfx Akpetn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Standard equipment: Itedpfjzqnxtsx Akpon - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) - Detection of paper and liner tears - Rewinding on label entry/label exit - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: ET2-120-IP19, The aim of the labeler is to label flat bags from one side. - Liner material: translucent paper (tear-resistant) - Repeat length: Label length + min. 3mm - Machine materials: SS304 and anodized aluminium alloy - Stepper and servo motors for precise positioning of the label - Controlled by a Siemens PLC - Label roll inside: 76 mm - Label roll outside: max. 350mm - Accuracy: ± 1 mm (except for product and label errors) - Label dimensions (LxW): 15-300mm x 10-130mm Isdeq U Sfwepfx Akpjtn - Power: 2.0kW / 230V / 50Hz - Dimensions (LxWxH): 2,000mm x 800mm x 1,500mm - Weight: approx. 180 kg

Condition: used, machine/vehicle number: 17314, Wood band saw, band saw machine, band saw, vertical band saw -Band saw: Vertical band saw -Drive: 5.5 kW -Cutting width: max.780 mm -Cutting height: max.300 mm -Saw band: length 5500 mm -Dimensions: 1800/875/H2440 mm -Weight: 870 kg Itsdpohx E Ucsfx Akpon

Year of construction: 2008, condition: ready for operation (used), machine/vehicle number: LF 020, Min. / max. web width: 150 – 330 mm Min. / max. paper weight: 90 – 160 g/m² Max. unwind roll diameter: 1000 mm Max. rewind roll diameter: 400 mm (300 mm when using the 3-shaft turret) Core diameter: Unwind: 76 mm / Rewind: 40, 45 and 76 mm (3 sets of 3 shafts) Iedpsy Shztjfx Akpjtn Max. speed: 200 m/min Description: Unwind with splicing tables and clamping devices, web guiding and tension control (including automatic web clamping during stop operation as well as dancer rollers), up to 12 rotary or 12 stationary knives within a pneumatically controlled slitting unit, edge trim extraction, interactive digital control panel with color touchscreen, program memory, settings management, counting functions (labels or running meters), and inspection control (missing label detection), fully automatic 3-shaft turret rewinder for non-stop operation. All required safety devices are installed on the machine.

Year of construction: 2022, condition: good (used), Manufacturer / Model: Grafotronic DCL2 550 Serial Number: 220520G Web Width: 550 mm Year of Manufacture: Location: Germany Condition: Used – in production CE Marking: Yes _____ Main Configuration Unwinder Module: • Max. roll Ø 1000 mm / weight 430 kg • Ultrasonic sensor and web guide ±15 mm • Splice table with clamps, servo brake, reel lift Flexo Printing / Coating Module (10–24" repeat): • GEW E2C UV dryer • Ceramic anilox 400 l/cm – 5.5 cm³/m² • Stainless steel ink pan 1.2 L, reverse-angle doctor blade • Re-register drive for overprinting • Max. speed 100 m/min – tolerance ±0.1 mm Die-Cutting Module (10–24" repeat): • Servo register system, anvil & support roller • Contact matrix rewind, stripping bar • Delam/Relam before die-cutting (limit 70 m/min) • Max. speed 250 m/min, tolerance ±0.1 mm Inspection & Slitting Section: • Missing Label Detection (MLD) up to 220 m/min • Automatic Sci-Fi knife system (12 sets) • Vacuum edge-trim removal • Auto-set under/back scorer (2 knives) Itsdexq A Hlspfx Akpon Semi-Automatic Turret Rewinder: • 2 × Ø 600 mm rolls • Semi-automatic cutting and push-out system • Label & meter counters • Core diameters 40–76 mm Additional Equipment: • Anti-static brush • Tablet with housing and accessories • ERP interface • Crane for magnetic cylinders Materials: • Foil 30–250 µm • Paper 100–250 µm _____ General Condition: Overall in good working order. According to the operator, two UV units require lamp replacement, which represents a minor cost. All other modules are fully functional.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM6424 1 x AL Tech UK Labelling Technologies Ltd high-performance 'print and apply' label applicator with infeed conveyor and Zebra ZE500 printer. Used to apply labels onto the short and long sides of pre-formed cardboard boxes. Manufacturer - ALTech UK Labelling Technologies Ltd. Model - ALritma S. Date of manufacture – 2020. Controls - 40 x programs, controlled by colour 4.3'' touch-screen. Label width - 20 mm to 107 mm wide. Speed - 50 m/minute. Iedpoy Uni Nsfx Akpetn Electrical requirements - 110-230 V / 50-60 hz / 1 phase. Video available on request.

Condition: good (used), Heating fan, mobile heater, gas heater, gas blower -Power output: approx. 30 kW -Dimensions: 620/340/H540 mm -Weight: 20 kg Itodpfxob A Hyuo Akpon

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater UDSA Gas-Fired Warm Air Heater – efficient, even at peak loads. The most well-known device from REZNOR is the UDSA gas-fired warm air heater, which ensures uniform air distribution in industrial halls. This easy-to-install unit is available in 14 power sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. Itodpsx Ihiijfx Akpen UDSA: compact, revolutionary, and innovative. With this generation of devices, halls can be heated in a particularly economical way directly – without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-fired warm air heater. The advantages: Efficiency of over 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air deflection vanes Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, as well as the gas and exhaust connections, must only be carried out by an approved installation company. These gas-fired warm air heaters are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation* control via ECOtronic TN - L* with day/night/week program - Exhaust gas extraction via roof, version B or C * - Exhaust gas extraction through the outer wall, version C * Gas-fired warm air heater type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat input (Hs) QN: 17.60 kW Max. rated heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air flow rate: 1360 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), ApenGroup LRP28DE Gas-fired hot air generator Gas type: G20 natural gas Connection pressure: 20 mbar Rated heat input QN: 27 kW Rated heat output: 24.63 kW Connection voltage: 230V 1N, 50Hz Airflow rate: 2700 m3/h Protection class: IP20 You can find more new and used items in our shop! International shipping costs available upon request! Ijdpfxox Ihlks Akpjtn