Used Suction Dredger for sale (2,702)

Condition: new, Year of construction: 2025, Extraction ground, Waffle floor mineral abrasive about 7000x4200mm without grid East surface with suction and collecting boxes For questions about technical specifications, etc. contact us in writing or by telephone. Prodpodz Ayvefx Aa Eof Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, Year of construction: 2025, Suction nozzle diameter: 120 mm or 100 mm Nominal flow rate: 1900 m³/h Chip bag volume: 1 x 0.1426 m³ Filter cleaning: manual Prjdowhuufopfx Aa Eef Motor power: 1.1 kW Machine height: 1000 x 500 x 1800 mm (L x W x H) Weight: 39 kg

Condition: used, Year of construction: 1997, used, good condition Manufacturer: Spänex Model: SMU 4500 Year of Manufacture: 1997 Machine No.: 4500-97/59 Clean air unit / negative pressure GS dust tested CE type tested Motor: 5.5 kW Predpfjw U Emqjx Aa Eof Connection diameter: 250 mm Pressure: 2400 Pa Air capacity: 4250/3530 m³/h nominal volume flow Discharge drums: 2 pcs of 230 l each Filter area: 22 m² Filter cleaning: automatic/pneumatic New price approx. EUR 15,000.00 Space required approx. 2070 mm x 900 mm x 1965 mm Weight approx. 600 kg Storage location: 97447 Gerolzhofen, loaded free, unpacked Sold in current condition as inspected, without guarantee or warranty

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: TD2002, Schmalz Vacuum Lifter with 50kg Payload / Lifting Capacity Predpfxsupyn Rj Aa Eof Dimensions: 30 x 30 x 30 cm, Weight: 11 kg Equipped with 1 suction pad, approx. 150 mm diameter 1 compressed air connection Good condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only

Condition: ready for operation (used), Year of construction: 1987, A Wieland extraction system is available. Engine speed: 2930rpm, power: 18.5kW, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Psdpfxsw Az Rcs Aa Esrf

Condition: new, Year of construction: 2025, pressure: 12 bar, Innovative dust-free sandblasters combine the power of conventional sandblasting with a vacuum system that captures all dust and removed material during work. This not only eliminates the need for extensive cleanup but also protects the operator and those around them from the harmful effects of airborne particles. With a dust-free sandblaster, you can complete cleaning and surface preparation faster and more efficiently. And thanks to the intuitive controls and user-friendly design, these machines are easy to operate, even for sandblasting beginners. ✅ PR 50 Predpfx Aaeupzn Ee Ejf Dust-free Sandblaster With its versatile application capabilities, the PR 50 can handle a wide variety of surfaces, from hard metal to delicate glass. Our PR 50 is an excellent choice for those working in the automotive, construction, or cleaning industries, to name a few. Its compact size and handy design make it easy to operate and transport, even for those new to sandblasting.

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) Pedpelxyhfefx Aa Eerf each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Suction nozzle diameter: 120 mm Flow rate: 1900 m³/h Vacuum pressure: 2500 Pa Chip bag volume: 1 x 1426 m³ Filter cleaning: manual Predsh Ekx Ispfx Aa Esf Motor power: 1.1 kW Dimensions: 1000 x 500 x 1800 mm (L x W x H) Weight: 39 kg

Condition: good (used), Year of construction: 2013, Suction lifter with 4 suction plates Lifting capacity: 400 kg vertical / 400 kg horizontal Weight: 50 kg Prodpfxjw Inzdo Aa Eef Width: 2000 mm Height: 1040 mm Depth: 200 mm

Year of construction: 2022, condition: new, Suction belt with two suction belts Vacuum individually adjustable Speed ​​up to 160m / min Infinitely variable speed Height adjustable also available with other lengths Inkjet base Prodpfxoch Hcae Aa Eof

Condition: ready for operation (used), Year of construction: 2019, An unused Kemper extraction system for room ventilation in the production area is available. Filter class: H10, Filter method: Storage filter, Filter material: Nano-Cellulose, Separation efficiency: 99.9%, Dust class: M, Volume flow: 5000m³/h, Motor power: 3.35kW, Filter area: 50m². Machine diameter: approx. 1200mm, machine height: approx. 2700mm, weight: approx. 420kg, operating hours: 1h. Documentation available. On-site inspection is possible. Prodpfxswrrrco Aa Esf

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Podpfx Aaowc Nrne Esrf Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete Predpfx Aodrtalja Eof essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2022, Suction nozzle diameter: 180mm Nominal volume flow: 4200 m³/h Scavenging bag volume: 2 x 175 l Filter cleaning: manual Motor power: 3.8 kW / 400V Machine height: 1700 x 600 x 2400 mm (L x W x H) Weight: 69 kg Prodpjd Txblefx Aa Ejf

Condition: good (used), Year of construction: 1998, Suction lifter with 4 suction plates Load capacity of the device: 600 kg Psdpfx Aaew Inlis Ejrf vertical and horizontal Net weight: 60 kg Width: 1250 mm Height: 1250 mm Depth: 250 mm

Year of construction: 2024, condition: new, Suction belt with two suction belts Vacuum individually adjustable Speed ​​up to 160m / min Infinitely variable speed Predshl H Ikspfx Aa Eef Height adjustable also available with other lengths Inkjet base

Condition: ready for operation (used), Year of construction: 2019, A filter system Teka is available. Air flow rate: 5000m³/h, motor power: 4kW, machine dimensions X/Y/Z: approx. 700mm/1000mm/2700mm. Includes control cabinet/control unit and a few folding pipes. Documentation available. An on-site inspection is possible. Predpfxsw Ni I Is Aa Esf

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 600, overall weight: 60 kg, warranty duration: 12 months, GLASS SYSTEM DS600 MINI VACUUM LIFTER Pjdpfswzafpsx Aa Eorf For facade installation, glass window assembly, and glass transportation. Device size optimized for operation between façades and scaffolding. Technical specifications Lifting capacity: Maximum lifting capacity: 350 kg Control system: Radio remote control (remote range up to 200 m) Battery charge indicator: Yes Power supply: Battery-powered, up to 12 hours of operation Construction: Number of suction cups: 4 Number of circuits: 1 Number of arms: — Device weight: 60 kg Movement capabilities: Vertical/horizontal rotation: No Rotation around own axis: No Option to use rotation actuator: No Supported material dimensions: Minimum: 0.8 x 0.8 m Maximum: 2.5 x 2.5 m Ability to lift HST glazing: No Compatibility: For use with cranes and HDS (truck-mounted cranes) Flexible device configuration – can be tailored to individual customer needs

Condition: new, Year of construction: 2025, Suction nozzle diameter: 260mm Nominal volume flow: 7700 m³/h scavenging bag volume: 2 x 290 l Filter cleaning: manual Podpfx Aaehw I Szj Ejrf Engine power: 4,8 kW Dimensions: 1900 x 670 x 2800 mm (L x W x H) Weight: 88 kg

Condition: good (used), Year of construction: 2000, Suction lifter with 4 suction plates Lifting capacity: 400 kg vertical/4000 kg horizontal Width: 2000 mm Height: 450 mm Depth: 120 mm Weight: 53 kg Pedpfxew I Hhvo Aa Eorf

Condition: new, Year of construction: 1985, Blow-in diameter: 300mm Pjdsurv Hbopfx Aa Eorf Spähesacks: 4 Filter area: 16 Filter cleaning: manual Dimensions: approx.: 1900 x 670 x 2800 mm (L x W x H)

Condition: good (used), Year of construction: 1993, Suction lifter with 4 suction plates Lifting capacity: 600 kg vertical/600 kg horizontal Width: 2000 mm Height: 450 mm Depth: 120 mm Weight: 53 kg Prodpfx Asw I Hk Dja Eof

Condition: new, Year of construction: 2024, Suction nozzle diameter: 150 mm Flow rate: 3000 m³/h Predpfx Asknyhhsa Ejf Negative pressure: 3500 Pa Air velocity: 47 m/s Chip bag volume: 2 x 0.1426 m³ Filter area: 5 m² Filter cleaning: manual Motor power: 1.5 kW Dimensions: Weight:

Year of construction: 2006, condition: good (used), Suction lifter Vertical lifting capacity 600 kg Support tube length: approx. 2.9m-3.5m Prjdpfxou R Rp Nj Aa Eef Load capacity per suction cup 100kg Connected load: 400V/50Hz 3Ph./1.9A External dimensions: Width:2900mm Height: 1200mm Depth: 280mm Weight: approx. 104kg

Condition: good (used), Year of construction: 1994, Suction lifter with 8 suction plates Lifting capacity: 800 kg, vertical / 800 kg horizontal Weight: 48 kg Width: 2800 mm Height: 400 mm Depth: 130 mm Prjdpfjw Inukjx Aa Eof