Used Stock Press for sale (21,693)

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Ledpfx Afszuzw Dokjaf Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1996, Continuous press Manufacturer: OTT Type: 300-K-D0 Year of manufacture: 1996 Technical data Plate dimensions: 2550 x 1350 mm Hot water heating 6 pressure cylinders Laedpozuzwwsfx Afkof Total pressing force: 135 t Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2007, Lamination press Manufacturer: Dimter Type: PROFIPRESS L2500 Year of manufacture: 2007 Technical data Wood dimensions to be processed Wood width, panels: 30 - 150 mm Wood thickness: 11 - 60 mm Wood inlet length: 800 - 2500 mm Laedpfx Afozuzwqjkef Panel widths, variable: max. 1300 mm Specific pressing pressure for cross-sections of 2500 x 60 mm: up to 1.6 N/mm2 The pressing surface per press cycle must not be smaller than 100 cm2 Filling width of the press per cycle: min. 650 mm / max. 1300 mm Max. filling area of the press per cycle: 3.25 m2 (The max. usable press width depends on the widths of the individual lamellas.) Wood type Softwood/hardwood Press without options Electrical connection, press: 7 kW Electrical connection, 40 kW generator: 56 kW Operating voltage: approx. 400 Volt / 50 Hz (C/s) Collection table extended to 3700 x 1300 mm, with stainless steel wood support Motor-driven multi-function slider Lamination press Profipress L 2500 Press bed area approx. 2500 x 1300 mm Sturdy base frame with lower press table made of stainless steel as a grounding electrode Quick-change stop guide sets for panel thicknesses of 19 - 40 mm, which can be hydraulically adjusted to the current filling width Hydraulic special pressure elements ensure uniform pressure distribution over the entire joint length and compensate for tolerances In multi-lane operation, filling widths may vary by a maximum of 15 mm Upper pressure plate with hydraulic drive generates high vertical pressing pressure for minimal displacement Integrated hydraulic unit for generating pressing force and driving the hydraulic motors Control cabinet and control panel Protective cladding Additional individual pressure elements from above Automatic gluing station with precision gluing head Infeed for different widths Camera Washing and rinsing device for gluing head Modem incl. software for online connection Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2019, Corpus press Manufacturer: LINYI JIANZHONG WOOD MACHINERY Type: JJZ-CP Year of manufacture: 2019 The JJZ-CP press is suitable for the production of plywood, doors, and MDF panel joints. The feeding and removal of the glued elements are carried out automatically via powered roller conveyors. Technical data - Max. pressure 500 t (adjustable) Ljdpfx Ajzuzwkofkeaf - Max. filling height 1300 mm - Min. filling height 900 mm - Max. filling size 1300 x 2500 mm - Press dimensions 3600 x 1370 x 4500 mm - Press placement approx. 500 mm below floor level - Feeding table 2000 x 1960 mm - Receiving table 2350 x 2500 mm - Max. power 13.2 kW - Weight 12000 kg - CE marking - Capacity: 6 batches per hour 2 corpus presses are available for sale. Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1998, Continuous body press Manufacturer: LIGMATECH TYPE: MPP 15 Year of manufacture: 1998 The MPP 15 is a flexible press for batch-related production without setup times. The MPP 15 can be used individually or in various combinations in an assembly line. The pressing forces are applied pneumatically. The separately adjustable vertical and horizontal pressure allows for pressing both horizontal and vertical bodies. The vertical forces are transmitted through a plate, while the horizontal forces act on the body via press cheeks. Ledpjzuzv Tofx Afkjaf The position of the center press cheeks can be adjusted using adjustable stops, allowing for different heights of bottoms and sides. During the infeed process, the body is measured photoelectrically, which automatically positions the horizontal pressure bar. Technical data: Body dimensions: Length: min. 300 mm / max. 2300 mm Height: min. 300 mm / max. 1220 mm Depth: max. 600/800/1000 mm (depending on the press type) Pressing pressure: vertical max. 17 kN horizontal max. 16 kN Working height: 500 mm Transport speed: min. 8 m/min. / max. 37 m/min. Pressing time: selectable up to 999 s Operating voltage: 400 V, 50 Hz Control voltage: 24 V DC (according to VDE) Required air pressure: 5...8 bar Air consumption: 120 NL/cycle Total connected load: 3 kW Weight: approx. 4 tons Required room height: 3000 mm Extended infeed belt as a staging area Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, Corrugated board press Manufacturer: Hüttenhölscher Year of manufacture: 2000 Technical data Lodezuzvmepfx Afkeaf Voltage: 400 V Current: 32 A Frequency: 50 Hz Compressed air: 6 bar Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2001, Short-cycle pressing line Manufacturer: Wemhöner Type: KT-F-1E Laedpfezuzi Tox Afkof Year of manufacture: 2001 Technical data - Pressing area: 5,750 mm x 2,200 mm - Operating side: left - Plate dimensions: Length: 2 x 2,600 mm - 2 x 2,620 mm Width: 2,070 mm Thickness: 6 mm - 40 mm - Pressing pressure: approx. 40 kg/cm² Note: Upon request, the complete layout plan of the system can be sent. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 1998, - Lengths: 1,800 - 2,300 mm - Widths: 500 - 1,300 mm - Thicknesses: 35 / 40 / 44 mm Door pressing system Manufacturer: Wild Laodozuzgrepfx Afksf Year of manufacture: 1998 For door dimensions: - Lengths: 1,800 - 2,300 mm - Widths: 500 - 1,300 mm - Thicknesses: 35 / 40 / 44 mm Consisting of the following sections: 1. Continuous door panel gluing with frame assembly station / 2. Pressing line with hardboard facing station Section 1 consists of: - Gantry loading system - Angle transfer with longitudinal and cross saws - Loading and feeding of the longitudinal and transverse frame parts from magazines - Longitudinal cutting station for the longitudinal frame parts - Connecting station of the frame parts with the door panel core. With clamping devices - Conveyor belt angle transfer with shuttle transfer of the door panel cores onto the glued hardboard Section 2 consists of: - Loading of the hardboard - Brush cleaning machine - Hardener application machine from below - Glue application machine from below - Roller conveyor - Angle transfer for the lower hardboard - Vacuum reversing device for the upper hardboard - Automatic facing station for hardboard and door panel cores - 2 door presses, each with 2 x 4 pressing stations, arranged parallel to each other - Both presses are loaded at the infeed with 1 shuttle loading basket - Both presses are unloaded at the outfeed with 1 shuttle unloading basket - Angle transfer to the infeed into a hedgehog buffer - Angle transfer at the outfeed of the hedgehog buffer and feeding to the stacking station - One-sided vacuum stacking with protective plate space Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, PLEASE READ CAREFULLY!!! THIS OFFER IS EXCLUSIVELY FOR EUROPEAN END CUSTOMERS, AND THE FIRST INQUIRY MUST INCLUDE COMPLETE CONTACT INFORMATION. THANK YOU. The forging line consists of a hydraulic 1500-ton forging press, an induction unit with 1200 kW, and a robot with a load capacity of 300 kg. So far, prototypes have been manufactured; however, the line was actually designed for series production, which has not yet taken place. The line was built and installed in 2023. The technical specifications are as follows: Hydraulic press 1500 tons (year of manufacture 2023) SIEMENS control system - Pressing force: 1500 tons - Retraction force: 120 tons - Downward stroke: 300 mm/s - Pressing stroke: 100 mm/s - Upward stroke: 300 mm/s - Installation height: 3,000 mm - Ram stroke: 1,500 mm (!) - Ram size: 1,600 x 1,600 mm - Table size: 1,600 x 1,600 mm - Ejection force / 1 position: 40 tons - Stroke: 600 mm - Ejection speed: 250 mm/s - Return speed: 250 mm/s - Stroke: 400 + 400 mm - Traverse speed: 200 mm/s - Ram positions: 3 positions Including a 1200 kW induction unit (year of manufacture 2023) MITSUBISHI control system - 1200 kW / 450 Hz induction unit for billets Ledpozvnpiofx Afkeaf - Coil size: Ø 215 / Ø 150 mm, two sets of coils - Material feeding system Including a Kawasaki robot (6 axes) – Model: ZX300S-D- (year of manufacture 2023) - Max. load capacity: 300 kg - Max. reach: 2500 mm Sample images of the machines are attached.

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 2.102.061, functionality: fully functional, pressing force: 135 t, stroke length: 210 mm, throat depth: 410 mm, controller model: Cybelec CybTouch 8W, working width: 3,100 mm, TECHNICAL DETAILS Press force: 135 t Lasdozrmu Nepfx Afkjf Max. working width: 3,100 mm Frame spacing: 2,500 mm Overhang: 410 mm Rear gauge depth: 750 mm Max. stroke: 210 mm Number of axes: 4 (Y1, Y2, X, R) MACHINE DETAILS Control system: Cybelec CybTouch 8W Power: 11 kW Tool holder type: European-style Punch holder: Standard Dimensions & Weight Dimensions (L x W x H): 3,720 × 2,300 × 2,750 mm Shipping weight: 7,700 kg Shipping packages: 1 EQUIPMENT Tools CE marking Documentation

Condition: ready for operation (used), functionality: fully functional, pressing force: 70 t, table width: 495 mm, table length: 650 mm, TECHNICAL DETAILS Pressing force: 70 t Stroke, min.: 10 mm Stroke, max.: 90 mm Table length: 650 mm Table width: 495 mm Laodpjzrmm Sofx Afkjf Column width: 400 mm MACHINE DETAILS Control system: CNC Dimensions & Weight Dimensions (L x W x H): 2,650 x 1,600 x 3,350 mm Dry weight: 9,000 kg Shipping packages: 4 pcs. EQUIPMENT Documentation

Condition: used, Year of construction: 2020, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Weight: 5.500 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Delem - Control system type: DA-41s - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 40 - Max. working width [mm]: 2000 - Column gap [mm]: 1800 - Throat depth [mm]: 200 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 100 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style Laedpfx Afezr Inwskof - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), number of spindles: 4, - Benchtop model - 4 drilling spindles - Foot switch Lasdpszv D D Nsfx Afkof - 380/400V 50Hz 4 new drive belts have been installed.

Condition: used, mileage: 941,433 km, power: 382 kW (519.37 HP), first registration: 12/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 4,000 mm, loading space length: 7,300 mm, loading space width: 2,460 mm, loading space height: 2,860 mm, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, * Scania Mediaradio * Navigation / CD/ Bluetooth / Sound system / USB / Aux * Rear view camera system with external monitor Lajdpfx Afeytmidokjf * On-board computer with multi-function steering wheel * Microwave * Leather interior * Auxiliary heater ----* Sun visor * Additional headlights ----* Hill start assist * Lane keeping assist * Emergency braking assist * Adaptive cruise control ----* Full air suspension * Differential lock, rear axle * Electric fifth wheel coupling * Steerable and liftable tag axle * Retarder ----4th floor Menke Janzen livestock body* own hydraulic unit * Lifting roof * Hydraulic loading ramp * Drinking trough system * 3 intermediate floors with partition grille * Side sliding doors * Feed flap * Storage boxes * Hydraulic connections for trailer operation ----Dimensions: 1st floor: 7.30 x 2.46 x 0.71 = 17.95 m² 2nd floor: 7.30 x 2.46 x 0.73 = 17.95 m² 3rd floor: 7.30 x 2.46 x 0.72 = 17.95 m² 4th floor: 7.30 x 2.46 x 0.70 = 17.95 m² Total area: 71.80 m² ----* Front axle tire dimension: 385/55R22.5 * Rear axle tire dimension: 315/60R22.5 * Fuel tank: 700 liters * AdBlue tank: 80 liters * Technical gross vehicle weight: 27000 kg * Unladen weight: 14590 kg * Permissible trailer load: 19000 kg * Overall length: 5990 mm ----Vehicle number/Vehicle: 11866----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export handling, arranging financing, applying for export license plates, vehicle delivery, vehicle registration, recovery and vehicle transport. ----YOUR VTS TEAM

Condition: used, mileage: 600,822 km, power: 488 kW (663.49 HP), first registration: 03/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space volume: 35 m³, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, Cab & Comfort Cab: FH16 Globetrotter XL (extra-high sleeper cab) * Seats: Comfortable driver's seat, air-suspended, heated, with seatbelt integrated into the seat; standard passenger seat, non-suspended. * Seat upholstery: Leather/textile mix, black/green/yellow. * 2 bunks: Rest package with two bunks, lower bunk foldable, upper bunk height-adjustable with safety net. * Air conditioning: Automatic climate control with multiple sensors and activated carbon filter, integrated parking air conditioning (I-Park Cool). * Windows: Electric windows (driver's side with automatic function), tinted windows, electric sunroof. * Sun visors: Interior, electric; exterior, on both sides. * Cooler box: 33 liters with freezer compartment under the bunk. * Storage space: Storage compartments at the rear/top, storage space under the bunk, drawer under the dashboard. * Additional comfort features: Leather armrests, leather door handles, curtains on windshield and windows, writing board for the steering wheel. ----Multimedia & Navigation * Infotainment: Media/infotainment system with navigation. * 8 speakers. * Radio with AM/FM and DAB/DAB+. * Bluetooth hands-free system. * USB and AUX connection. * Displays: Driver information color display (4 inches). * Second 9-inch touch display. * Navigation system: European maps. ----Safety & Assistance Systems Collision warning with emergency braking function. * Lane keeping assist. * Rear view camera (digital), heated lens, automatic lens protection. * Rain sensor for windshield wipers. * Immobilizer (transponder in key). * Smoke detector. * Black seatbelts (driver and passenger). * Brake lights with emergency brake flash pattern. * Electronic Stability Program (ESP). * ABS brakes. ----Lights & Electrical Light package Plus. * Bi-Xenon headlights. * LED fog lights. * Headlight cleaning system. * LED daytime running lights (V-light). * Work lights, side (2 front, 2 rear, LED white). * Marker lights, rear and side, with turn signal function. * Interior lighting with dimmer and red night light. ----Drive & Engine Engine: 16.1-liter diesel engine, 664 hp/488 kW, 3,213 Nm, Euro 6 with SCR, particulate filter, exhaust gas recirculation, two-stage turbocharger. * Transmission: I-Shift ATO3112F, automated 12-speed transmission with overdrive, reinforced. * Auxiliary drive: Gearbox-side, max. 600 Nm. * Differential lock: Between axles and wheels. * Retarder: Compact retarder, gearbox-mounted, 450 kW braking power. Lodpfx Afszi Rcrokeaf ----Chassis & Axles Axle configuration: 6x2, hydraulically steered trailing axle, single tires. * Air suspension: Front and rear axles. * Steering: Single-circuit power steering, leather steering wheel, adjustable. ----Brakes Disc brakes, electronically controlled, with TCS. * EBS (Electronic Braking System), Medium package. * Automatic impulse parking brake. * Stationary trailer brake. ----* Rear view camera. * Central locking with remote control. * Dura-Bright polished aluminum wheels. * Exterior sun visor. * Auxiliary headlights. ----2nd Floor Pezzaioli livestock body, own hydraulic unit. * Hydraulic loading ramp (2-part). * Hydraulic loading ramp, side. * Feed flaps. ----* Tire dimension, front axle: 385/65R22.5. * Tire dimension, rear axle: 315/70R22.5. * Fuel tank: * AdBlue tank: 64 liters. * Technically permissible total weight: 19,000 kg. * Unladen weight: 14,800 kg. * Permissible trailer load: 24,000 kg. * Overall length: * Wheelbase: 4800 mm. * Next service due: / ----Vehicle number/Vehicle: 12259----Error

Condition: used, mileage: 943,220 km, power: 324 kW (440.52 HP), first registration: 08/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 01/2026, brakes: retarder, color: red, gearing type: mechanical, emission class: euro5, total length: 11,430 mm, total width: 2,550 mm, total height: 4,000 mm, loading space length: 8,260 mm, loading space width: 2,426 mm, loading space height: 2,609 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, Cab & Comfort* Cab with high roof 'XXL' (2440 mm wide, 2280 mm long) * Comfort control panel above the sleeper berth * Two sleeper berths with storage space (aluminum frame), mattresses above and below, two pillows * Leather interior trim, leather seat covers * Driver's comfort seat, air-suspended, air-conditioned, with lumbar support and heating * Co-driver's comfort seat, air-suspended, with lumbar support, shoulder adjustment and heating * Multifunction leather steering wheel, adjustable in height and tilt * Central locking * Electric windows for driver and co-driver * Cooler box * Storage table, two drawers in the dashboard, two waste containers * Ambient lighting, reading lights, entry lighting * Sun blind for windshield (electric) * ECAS air suspension system * Auxiliary air heater EBERSPÄCHER D4S * Air conditioning with automatic temperature control (CFC-free) * Electric stationary air conditioning ----* Touchscreen media radio * Hands-free system * Voice control (German/English) * MAN sound system * Navigation DVD Europe * Antenna for GPS and car phone * Digital tachograph (CONTI) ----Technology & Safety* Engine D2066LF25, 440 hp / 324 kW, EURO5 SCR, 2100 Nm * Transmission ZF 16 S 222 DD & ZF-Intarder * MAN ComfortShift manual transmission * MAN BrakeMatic (electronic braking system), ABS, ASR * Disc brakes front and rear * High-load roll stabilization (stabilizer + X-strut) * Hill start assist * Speed limiter (85 km/h) * Cruise control * Full air suspension * Tag axle, steered and liftable * Fifth wheel coupling with DouMatic * Spray mist reduction ----Exterior & Body* Alloy wheels (ALCOA polished) * Aero package for high roof including roof spoiler * Side panels * Movable side flaps * Additional headlights * Sun visor ----* 3rd floor FINKL livestock body * Separate hydraulic unit (24V) * Lifting roof * Hydraulic loading lift * 2 intermediate floors with 2 partition gates each * Drinking trough system * Fan * Electric side sliding door * Electric livestock scale * Storage boxes ----Loading area 1st floor: 22.30 m² = 1x 1.90 m loading height Loading area 2nd floor: 43.70 m² = 2x 1.37 m loading height Loading area 3rd floor: 63.90 m² = 3x 0.97 m loading height ----* Tire dimension front axle: 385/55R22.5 * Tire dimension rear axle: 315/70R22.5 * Fuel tank: 430 l * AdBlue tank: 70 l Lajdsziit Nepfx Afkof * Technical gross vehicle weight: 28000 kg * Curb weight: 15100 kg * Permissible trailer load: 18000 kg * Overall length: 11430 mm * Wheelbase: 5500+1350 mm * Next inspection: 07.2026 ----Vehicle number: 12159----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.----We are happy to assist you with all formalities that arise when purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicleTÜV/SP inspectionComplete export processingArrangement of financingApplication for export license platesVehicle transfer

Condition: good (used), Year of construction: 1981, operating hours: 376 h, functionality: fully functional, machine/vehicle number: 01031, total height: 3,200 mm, total width: 1,900 mm, total length: 2,500 mm, table width: 570 mm, table length: 670 mm, overall weight: 10,000 kg, clamping force: 400 kN, input frequency: 50 Hz, input current: 25 A, power: 7.5 kW (10.20 HP), REIS TUS 600 K Coating Press - Operating voltage: 380/260 V Lodpozlfb Isfx Afkeaf Attention: The item must be picked up between September 8 and September 10, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach - loaded onto a truck.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, A very good machine with the benefit of the infeed table and outfeed exit table, which saves significantly on labour. Lsdpfxjzifpge Afksaf

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer Presona Sweden Type LP 85 VH2 Laedpfx Afszulknokjf Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Pre-compression force 28 t Main compression force 85 t Feed opening 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volumetric capacity: 1200 m³/h Throughput capacity at 30-100 kg/m³: 13-30 t/h Tying 5-strand vertical, (3-strand horizontal) Oil tank volume 2000 L Transport dimensions of press 10400 x 2400 x 2800 mm (LxWxH) Weight approx. 27000 kg Materials: Paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It has been dismantled from ongoing operation. The following work has been carried out by us: New wear plates (Hardox) in the press channel Seals completely replaced on the main cylinder Oil filter changed Vertical tying mechanism overhauled and made functional The horizontal tying mechanism is currently not functional. The technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any possible errors. The offer is subject to change, prior sale is reserved, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without warranty.

Condition: used, Year of construction: 2016, Colour: Blue - Year: 2016 - Documentation available: No - CE certificate present: No - Serial number: 61700170 Financial information Lsdpfx Afezry S Uskjaf VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1967, total length: 2,000 mm, total width: 1,750 mm, total height: 2,850 mm, Colour: Grey Empty weight: 6.000 kg - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 740 - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Lodpozry Icefx Afksaf Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2023, total length: 1,400 mm, total width: 600 mm, total height: 2,180 mm, Colour: Blue Empty weight: 280 kg - Year: 2023 - Documentation available: No - CE marking present: Yes - CE certificate present: No Lodpjzry H Eefx Afkeaf - Serial number: SA021 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 30 - Min. stroke [mm]: 0 - Max. stroke [mm]: 190 - Table length [mm]: 695 - Table width [mm]: 60 - Ram width [mm]: 60 - Max. opening height [mm]: 1000 - Height adjustment [mm]: 830 - Transport dimensions: 1400mm x 600mm x 2180mm (l x w x h) - Transport weight [kg]: 280kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,250 mm, total width: 2,100 mm, total height: 3,300 mm, Colour: Green Empty weight: 7.000 kg Price: On request Lodpfx Aozrxr Tefksaf - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 100 - Min. stroke [mm]: 20 - Max. stroke [mm]: 140 - Table length [mm]: 580 - Table width [mm]: 780 - Ram width [mm]: 400 - Throat depth [mm]: 315 - Max. opening height [mm]: 560 - Height adjustment [mm]: 70 - Pressing speed [mm/s]: 360 - Transport dimensions: 1250mm x 2100mm x 3300mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2007, total length: 3,550 mm, total width: 1,800 mm, total height: 2,800 mm, Colour: Grey Weight: 10.000 kg - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 11520 - Drive system: CNC - Control system brand: Baykal - Control system type: EC4-CNC - Power [kW]: 11.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 150 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Max. stroke [mm]: 260 - Crowning system: CNC-controlled - Punch holder: Quick-release - Tool holder type: European-style - Transport dimensions: 3550mm x 1800mm x 2800mm (l x w x h) Lajdpfszrxftex Afksf - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1964, total length: 2,100 mm, total width: 1,500 mm, total height: 1,850 mm, Colour: Green Weight: 2.500 kg - Year: 1964 Laedpfx Aozc Irrefksf - Documentation available: No - CE certificate present: No - Serial number: 13120 - Drive system: Conventional - Number of axes [pcs]: 1: Y1 - Press force [ton]: 50 - Max. working width [mm]: 2000 - Backgauge depth [mm]: 0 - Punch holder: Fixed - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 2100mm x 1500mm x 1850mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum