Used Sack Vacuum Press for sale (29,993)

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Iedehfwqzspfx Ag Dja Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: excellent (used), Year of construction: 1983, pressure 630 t Ijdpfx Agoxvdr He Dja diameter 320 mm stroke 310 mm weight of the machine ca. 3500 t

Condition: used, Year of construction: 1979, pressure 18 t diameter 250 mm stroke 150 mm distance between columns 210 mm max. distance table - ram 400 mm power capacity 5,5 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,0 x 1,0 x 1,8 m hydraulic die-hob press with oil-hydraulic drive, controllable dependent on pressure/time Iedpfx Agsvzxp Io Doa as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1952, Type of machine: Down-stroking press Manufacturer: SACK&KIESSELBACH Model: EP500 Year of construction: 1952 Pressing force: 500 t Clear gap: 450 mm Location: Iedjwxw H Eepfx Ag Dsa In Germany

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, press force: max. 1.250 to. daylight: max. 480 mm Iodpfx Agowuutbo Dea width: 585 mm stroke: max. 355 mm weight: 7.200 Kg.

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: M42L/8940, Offer Number: M42L/8940 Machinetype: hobbing press Make: SACK & KIESSELBACH Type: 1000 Constr. year: 1955 press power: 1000 to clear width: 585 mm daylight: 410 mm stroke: 380 mm table size: 0/ 700 mm Ijdpfx Agewi Tdbj Dea Location: In our warehouse

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Ijdehtaaqspfx Ag Dja Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: good (used), Year of construction: 1971, pressing force: 630 t, Manufacturer: Sack & Kiesselbach Iedpfxswxw Amj Ag Dja Model: EP 630 Mode of operation: oil-hydraulic Table height: 1175 mm Stroke: 305 mm Tool installation height: 317 mm Rapid approach descending speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Electrics: 550 V / 60 Hz Information without guarantee.

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, Press force: max. 630 to. Tool installation space: 450 x 520 mm Iedjwun E Dspfx Ag Dja Tool installation hight: max. 600 mm Stroke: max. 275 mm Power consuption: max. 5,5 kW

Condition: excellent (used), Year of construction: 2015, With a view to optimized and energy-saving drives in the vehicle industry, significantly higher demands are placed on the components of the drive system. Higher power transmission and higher torques combined with smaller size are the challenges. This development has increased the demand for cold-formed splines. With the Vertical Splines Press (VSP) Sack & Kiesselbach provides the customer with a solution that offers technological and also logistical advantages compared to conventional technologies (such as roller burnishing or broaching). The relatively small and very user-friendly press can be configured both manually and as an automated system. In addition to the splines press, the customer can also obtain the appropriate die system and process technology from a single source. 1 used Vertical Splines Press make Sack & Kiesselbach type VSP 50/30 Year 2015 Technical data: Pressing force 500KN ram stroke 450 mm Closing speed 200 mm/s pressing speed 5,5 mm/s opening speed 120 mm/s table dimension 500 x 400 mm installation height 1000mm width between columns 530 mm splines cylinder speed 3-9,5 mm/s Dimensions height 2900 mm Isdpfxegtty Te Ag Dea width 3100 mm depth 1400 mm Drive power 8 KW Special equipment Digital measuring system Splines tool for internal splines

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, press power: max. 630 to. daylight: max. 375 mm Iedpfjgwv S Ujx Ag Doa stroke: max. 275 mm weight: 4.500 Kg.

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 serial number 31900 Isdpfx Asul U Sveg Doa Pressing force 630 t, stroke 310 mm Installation height 320 mm Working height 1200 mm Drive power 10 KW

Condition: ready for operation (used), Year of construction: 2010, Vacuum press – working area 205 x 415 cm – 2 worktables For sale: Professional vacuum press with a 205 x 415 cm working area, equipped with two independent worktables and a high-performance vacuum pump. The machine is in perfect technical condition, currently in continuous operation – ready for immediate use without any additional investment. Included in the set: spare membrane set, Isdpfx Agoxqht Do Dja felt, table cover/protector. Price negotiable.

Year of construction: 2025, condition: new, Vacuum membrane press VPR-3500 is a universal Press for the wood processing and thermoforming. The VPR-3500 press is also adjustable and mobile. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components Vakkumsystem: work surface with vacuum channels for a uniform Unterdruckauch for large workpieces. Becker Vakkumpumpe / oil free / tank capacity 100 l Iodjd Ecc Tspfx Ag Dja Work surface: 3500x1500mm Pump output: KW 0.75 Vacuum pump flow rate: 40 m3/h Rubber membrane Dimensions exterior: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Off the shelf 54634 Bitburg -free load-

Condition: new, power: 324 kW (440.52 HP), overall weight: 32,000 kg, fuel type: diesel, color: orange, axle configuration: > 3 axles, gearing type: mechanical, Year of construction: 2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ A powerful Naaktgeboren industrial vacuum truck with Vacu-Press 10,000, HI-LIFT, stainless steel tank, complete remote control, extensive lighting, and a comprehensive list of accessories. Ideal for companies requiring high suction power, efficient BigBag operation, and robust quality. Technical Highlights 1. Pump Unit ? Vacu-Press 10,000 ? air-cooled 3-lobe rotary piston blower ? Capacity: 8,220 m³/h (no-load) ? Vacuum: 0.95 bar (0.05 bar abs.) at 100°C ? Overpressure: 1.20 bar (2.20 bar abs.) at 125°C ? Maximum power consumption: 190 kW ? Extremely high suction, ideal for heavy industrial applications. 2. Sound Insulation ? Completely sound-insulated pump housing ? Stainless steel interior lining ? Inlet, cooling, and exhaust mufflers ? Noise level: approx. 80 dB(A) ? Quiet operation despite extreme performance. 3. Stainless Steel Tank ? Load volume: 13.0 m³ ? Filter chamber: 2.0 m³ ? Total volume: 15.0 m³ ? Wall thickness: 6 mm stainless steel ? Design pressure: full vacuum up to 2 bar overpressure ? Temperature range: -20°C to +50°C ? Filter chamber at the front, fully openable lid ? Discharge via large oval, waterproof and pressure-resistant flap 4. HI-LIFT Version ? Liftable tank for BigBags, skips, containers ? Sack discharge height under slide valve: approx. 1,600 mm (with tilted tank) ? Lifting cylinder hydraulic, double-acting ? Lift: 1,070 mm ? DN300 pneumatic slide valve 5. Filter System ? Cylindrical filter chamber Ø 1,800 mm ? Separation efficiency: 99.95% ? Filter material: BIA class C ? Suitable for fine dusts and demanding industrial vacuuming tasks. 6. Suction and Blowing Connectors ? Suction port: DN150, large internal deflection elbow, replaceable wear plate ? Blowing port: DN125 ? Hose couplings selectable 7. Rear Lid & Body ? Hydraulically operated ? Internal cone + blowing connection ? Hydraulic lock with self-adjusting wedge closure ? Chassis: MAN TGS 41.440 BB ? Stainless steel toolboxes (V2A) ? Storage boxes left & rear ? Galvanized fenders ? Continuous tipping axle ? OMSI transfer case for optimal pump speed ? low consumption, long service life 8. Control System Operation: electric (relay control) Functions: ? Main switch ? Work lights on/off ? Beacon lights on/off ? Selection suction/blowing ? Start/stop units ? Blowing start also via separate switch at rear right Signal indicators: ? Blower oil pressure ? Blower oil temperature ? Work light ? Beacon light ? Cooling air flap ? Free suction flap ? Blowing flap Instruments: ? Vacuum gauge Ijdjwqblpepfx Ag Doa Accessories (included) * Speck water pump 701/140B + approx. 1,000-liter water tank + 40-m spray hose reel * Paint: RAL 2004 * IFM liquid level sensor * 6 work lights (2 left, 2 right, 2 rear) with changeover switch * Hetronic remote control: ? Suction arm ? Suction start/stop ? Speed +/– ? Water pump on/off ? BigBag slide valve open/close * 5" Perrot suction & blowing couplings (male) * Fire extinguisher * 4 beacon lights (2 cab, 2 body) * Full-length left-side hose compartment * Rear axle storage box * Storage box under front silencer * 42 additional filter bags For more detailed information and/or photos, please contact us directly. A large selection of additional vehicles for PURCHASE or RENT can be found at: Subject to change, prior sale, and errors excepted. The buyer is obligat

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: F06034L, Vacuum press Columbus Ijdpfxjxzqmuo Ag Dsa Power: 350 W Tank capacity: 200 l Suction capacity: 8 m³/h Vacuum: max. 0.85 bar

Condition: like new (used), Year of construction: 2025, operating hours: 900 h, functionality: fully functional, machine/vehicle number: M-06 1292 5014 25, total height: 2,150 mm, total length: 1,700 mm, total width: 5,250 mm, table width: 5,000 mm, table length: 1,420 mm, table load: 200 kg, overall weight: 680 kg, We are offering the vacuum press with integrated pressing time control and MAX-CONTROL PLC control system for sale. Transport and any costs incurred as a result, such as customs clearance, are the responsibility of the buyer. Iodpfx Agsxy Sdfj Dsa

Condition: excellent (used), Catalogue no.: 7815 TECHNICAL DATA Worktable dimensions (L/W): 2900x1200mm Isdpfx Agjxwygce Doa Overall table dimensions: 3000x1300mm Operating temperature: ±40-60°C Maximum temperature: ±60°C Total machine power: 5.25kW Vacuum pump power: 0.90kW Vacuum pump capacity: approx. 25/30m3/h Noise level: approx. 70dB Dimensions (L/W/H): 3060x1400x1400mm Weight: 360kg – DTR Documentation – Unpainted – Very good condition – Used press Net price: 21,900 PLN Net price: 5,200 EUR depending on the exchange rate of 4.2 EUR (Prices may change with higher fluctuations)

Year of construction: 2009, condition: used, comprising: 1 vacuum press with heating BÜRKLE type: M8, year of manufacture: 2009, serial no.: , dimensions (WxHxD): approx. 300x180x200 cm, 2 loading tables dimensions (WxHxD): approx. 300x100x180 cm, for alternating loading, 2 film cutters, dimensions (WxHxD): approx. 50x100x200 cm, 2 paternoster racks, dimensions (WxHxD): approx. 100x250x200 cm, with mandrels for film rolls, 1 vacuum pump Isdpfx Aoxnam Rog Dja

Year of construction: 2025, condition: as good as new (ex-display), Vacuum - membrane press VP - series are the ideal solution for the wood processing industry. VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive so that the performance is higher. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components The heating system is equipped with temperature control Rubber membrane 2.5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of vacuum / Tankinhalr 15 l Iodsdvltyjpfx Ag Dsa Work surface: 3000x1500mm Heating system temperature: Max 60 degrees C Heating system: KW 4,5 Pump output: KW 0.75 Vacuum pump capacity: 25 m3/h Rubber membrane Dimensions exterior: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Off the shelf 54634 Bitburg -free load-

Year of construction: 2025, condition: new, INFINITY - the vacuum press system in special lengths The Columbus INFINITY is the new and groundbreaking vacuum press system that can be constructed in the length desired by the user on request. The specially created and eponymous Infinity Principle, according to which the usable area in terms of length can be increased very cost-effectively almost to infinity, is used in each individual component. The system offers both maximum flexibility and maximum efficiency, because where the Infinity Vacuum Table and the Rolling Membrane System offer infinity, the Multi-Zone Suction guarantees maximum control. Thanks to this Multi-Zone Suction, only that section of the usable area that is currently in use is vacuumized. INFINITY is perfect for all users who value an infinite usable area for a wide variety of special pressing with maximum yield volume. Directly from the manufacturer - including warranty! Execution: Length and width on customer request! Table base made of stable, welded metal construction, adjustable table feet. The table material is a 21 mm thick birch plywood board. An approx. 15 mm wide vacuum suction groove is milled on the table surface to seal the membrane. The membrane is wound onto a reel and is manually unrolled onto the table surface using a very smooth-running linear slide. The cavities of the table frame serve as vacuum buffer storage. The vacuum pump has an output of 100 m³/hour. The table surface has several suction grooves, these are divided into 5 suction zones. Iedjxu Eduspfx Ag Doa The table load is about 200 kg / m

Year of construction: 2007, condition: used, comprising: 1 heated vacuum press BÜRKLE Type: BTF 1528-1400 Year of manufacture: 2007 Serial No.: 11507-20, dimensions (WxHxD): approx. 350x200x200 cm, table surface approx. 280x170 cm; 1 lifting platen table BÜRKLE Serial No.: 11507-30, with 2 support plates, dimensions (WxHxD): approx. 300x140x200 cm; 1 turning table BÜRKLE, for support plates, Serial No.: 11507-10, dimensions (WxHxD): approx. 400x320x200 cm; 1 BÜRKLE film unwinder Serial No.: 8669-71 with cutting device; 1 KRAFT paternoster storage rack Type: 810-41-00001 Year: 1991 Serial No.: 19603016, dimensions (WxHxD): approx. 220x380x150 cm; 1 BÜRKLE panel table for shaped parts, dimensions (WxHxD): approx. 350x120x180 cm; 1 film unwinder stand; 2 safety light barriers; control cabinets; 1 pressure/vacuum tank approx. 1,500 ltr.; 1 BÜRKLE terminal; 1 HP flat screen, keyboard and mouse. Supply does not include stock of coating film, the remaining material stock is to be properly decommissioned by the buyer as instructed. Isdpfsxnam Djx Ag Dsa

Year of construction: 2025, condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Possible applications: Veneer / form gluing / wrapping... Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h Iedpfx Agodwh E Ae Doa The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck -

Year of construction: 2025, condition: new, Exclusive to Columbus: the digital master manual with user knowledge from +45 years Modular system - can be upgraded at any time with a vertical opening mechanism and heating system for plastic panels! Directly from the manufacturer - including warranty! PIONEER Basic L - high-precision vacuum press incl.: • Membrane fast-change system • Gas springs for flap opening • Highly elastic natural rubber membrane (up to +130 °C) • Stable phenolic resin worktop (up to +120 °C) • 40 m³ high-performance vacuum pump (up to 900 mbar (9 t / m²)) from BECKER • Analog vacuum pressure gauge • Connection for external vacuum bag • Feet including smooth-running swivel castors • Mounting fixture for vertical opening system Iodpfx Agsxu Edho Dsa • FESTO pneumatics and SIEMENS electrics Technical data: • Voltage: 400 V • Power: 1,3 kW • Supply frequency: 50 Hz Dimensions: • Usable area: approx. 3050 x 1350 mm • Dimensions inside the frame: approx. 3130 x 1430 mm • Max. workpiece height: approx. 600 mm • Overall dimensions: approx. 3700 x 1640 x 1080 mm

Year of construction: 2025, condition: new, Exclusively from Columbus: the digital master manual with user knowledge from +45 years enables safe use of the press Modular system: Vacuum press with flap opening - can be upgraded at any time with a vertical opening mechanism for high workpieces and better usability AND heating for forming plastic panels (such as Corian) Iedjxu Ec Repfx Ag Doa 3 different sizes available Austrian, ISO-certified mechanical engineering quality with the exclusive use of branded components guarantees many years of use