Used Steam Boiler for sale (1,389)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: MRG 2500 4G, operating temperature: 95 °C, total height: 4,700 mm, total length: 5,000 mm, total width: 1,980 mm, AHENA 3 MW Shredded Steel Boiler For Sale For sale is a brand new AHENA 3 MW steel boiler , which has a four flue system, horizontal flue pipes and moving grate automatic feed. Ideal for solid fuels such as bark and wood chips. Key features: - Power: 3 MW nominal power - Year of production: 2024 - Fuel: Bark and wood chips, max. particle size G100 - Heat release: Water cooled system, maximum temperature +95°C, 2 bar operating pressure Kfedpsua D Twofx Aa Esa - Flues: 4 flue systems (2 in tubes, 2 in firebox) - Weight: 16,000 kg - Dimensions: Height 2600 mm (4800 mm with base), Width 2000 mm, Length 5500 mm Boiler specifications: - Model: MRG 2500 4G - Firebox: Large firebox with wet walls, minimum 110 mm thick refractory cladding - Maintenance: rear inspection door and front cleaning door for regular embers cleaning - Connections: flanged connections for hot water inlet and return, flue gas pipe connection, cleaning brush - Water content: approximately 11,000 litres - Flue gas volume: 15,000 m³/h at 250 °C - Heat exchange surface: 155 m² - Volume of combustion chamber: 8.3 m³ - Water connections: DN200 Additional systems: 1. Moving Grid Burner: - Wet-wall base, fully insulated and fireproof - Hydraulic movement, divided into zones with fans 2. Ashtray System: - Water cooled discharge with pulley, water circulating pump 3. Hydraulic Sliding Feeding System: - Made of thick steel plate with fire protection valves 4. Control and Regulating Electrical Cabinet with PLC: - With 15" touch screen display, inverters and lambda probe 5. Compressed Air Duct Cleaner (optional): - With electric valves, electronic sequencer 6. Smoke Exhaust and Multicyclone Particulate Filter: - Centrifugal extractor and inertial dust separator 7. Smoke pipe and chimney: - Stainless steel flue pipe and galvanized carbon steel chimney This boiler is an excellent choice for high efficiency and environmentally friendly operation. The chimney is made of high quality steel and is very efficient for high efficiency.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, operating pressure: 6 bar, The CERTUSS Electro E – 120 electric steam generator quickly produces steam in less than 3 minutes. The total heating power is regulated by a pressure sensor and features three-stage manual power control. The CERTUSS E – 120 electric steam generator is ideal for small-scale steam industry operations without access to fossil fuels and requiring an electric steam boiler. The CERTUSS E 120 electric steam generator is a compact, user-friendly unit with electronic controls. Ksdpfx Aaexwdchj Esfa Steam output is 160 kg/h (120 kW) at an operating pressure of 6 Bar. Power consumption can be adjusted across three sections. The generator is in excellent technical condition. The unit has been dismantled. All our equipment offered for sale undergoes rigorous technical checks, including pressure testing, safety automation testing, leak tests, and more. We cooperate with a freight company that delivers equipment to our customers throughout Europe and beyond.

Year of construction: 2021, operating hours: 100 h, condition: excellent (used), functionality: fully functional, Optima steamer XE 18 KW electric steam cleaner used very good condition 400 V 32 Ampere With accessories 2 x steam hose 10 meter 2 x steam gun Kedswnpkujpfx Aa Ejfa machine cleaning vehicle cleaning car wash

Condition: used, - Dimensions: 600x700x787 mm - Year: 2005 Kfedpsw Em U Sefx Aa Eoa - Serial No.: 204T - Variable low temperature program +60/90°C - Water inlet pressure: 1.7–3.4 bar - Steam pressure: 1 bar - This is a very healthy cooking method. A fast, healthy, economical, and simple cooking process. - High-pressure steam cooking offers the chef excellent portion control for steaming, braising, blanching, and cooking. - Cooking chamber: 1 - Voltage: 400V - Power: 18.2 kW

Condition: good (used), Steam generator, evaporator Ksdpfx Aaewz Edqs Esfa -Vaporizer: Manufacturer KED, Kurt Ehemann/Type electric vaporizer -Number: 5x evaporators available -Price: per piece -Total dimensions: Ø 330 x 575 mm -Weight: 35 kg/piece

Year of construction: 2004, condition: excellent (used), 1 used quick steaming units ----- manufacturer : CERTUSS type : Universal capacity : 1.300 kg/h thermal output : 947 kW working pressure : 10 bar Kedpfei E Hztsx Aa Eefa test pressure : 57 bar water contents approx. : 155,7 ltr heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2004 yoc heating coil : 2018 / 2021 equipped with Certuss oil burner, oil throughput 40-80 kg/h, switch cabinet built on boiler body, feed water pump and the existing fine and coarse fittings.

Condition: used, Year of construction: 2017, Overview  The steam generator was built in 2017 by the German manufacturer Certuss. It is fired with gas and can deliver up to 300 kg/h. The unit was used in a German brewery. Was in operation till June 2025. Still assembled but disconnected from the gas pipe. Unit was only used once in a week during brewing, therefor the working hours are low. Technical specifications  Steam production max.: 300 kg/h Powered by gas Operating Pressure: 10bar Accessories  Filter Condensate recuperation Kfodpfx Ajwwaxzea Eoa

Condition: ready for operation (used), Technical characteristics Max power 175 kW Air flow rate 8900 m3/h Thermal fan 2,2 kW, smoke fan 0,55 kW Kedpfxjtv Th Ee Aa Eefa Chimney diameter 200 mm 3 hot air outlets diameter 250 mm Combustion chamber dimensions : 950 x 600 x 680 mm Ideal for heating workshops of 600 to 800 m2 (about 3000 m3) Power and Motors Voltage: 400 V Pluging: Three-phased Power: 3 Kw Overall dimensions Lenght: 1700 mm Width: 930 mm Height: 1970 mm Weight: 615 Kg

Year of construction: 1988, condition: good (used), machine/vehicle number: D 206089, OFFER 15106 Technical data: - Total payload driven + travelling unit 60000 kg. - Payload per container device 30000 kg - workpiece diameter 500 - 4000 mm - Centre distance of the support rollers mot. adjustable - roller diameter 500 mm - roller width 470 mm - infinitely variable rotation speed 100 - 1500 mm/min - torque 5132 Nm Kjdpehcwzasfx Aa Eefa - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on guide rails and can be manually - can be moved manually in parallel - Space requirement for attached unit approx. W 2800 x H 1200 x D 1600 mm - Space requirement with running unit approx. W 2800 x H 1200 x D 1200 mm - Weight attached unit approx. 4800 kg - Weight with running unit approx. 3800 kg

Year of construction: 2008, condition: good (used), Industrial stainless stell humidifier , steam generator Kjdpsfl Iqujfx Aa Eefa Outdoor unit 4x8 kw heating wire 32kW 160 ° C max

Condition: good (used), Analyzer, vapor pressure tester, Minivap VPS -Manufacturer: Grabner, steam pressure tester Minivap VPS -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm Kfodowbd Twepfx Aa Eoa -Weight: 7.9 kg

Year of construction: 2007, condition: excellent (used), 2 used quick steaming units ----- manufacturer : LOOS, Gunzenhausen type : DF 1000 capacity : 1.000 kg/h working pressure max : 31 bar test pressure : 56 bar heating surface : 21,9 m² water contents approx. : 110 l year of construction : 2007 equipped with Weishaupt combined burner gas&oil, Kfjdpfxenp Hvbe Aa Eea type WM-GL 10/3-A, version ZM-T, 110-1.000 kW, oil throughput 20-84 kg/h, switch cabinet built on boiler body, fittings for gas supply, feed water pump and the existing small and large fittings.

Condition: used, Year of construction: 2010, Overview  This SOGECAL steam boiler, model M8KK, was manufactured in 2010 and is available for sale due to the company's relocation, where it is no longer required. It has been used exclusively for beer production, runs on diesel fuel and is available immediately. Technical Data  Model: M8KK Year of Manufacture: 2010 Fuel Type: Diesel Service Pressure: 8 Kg/cm² Test Pressure: 17 Kg/cm² Design Pressure: 11 Kg/cm² Steam Production: 450 Kg/h Thermal Power: 2700 Kcal/x100 Heating Surface: 8.8 m² Operating Temperature: 174 °C Volume of Water/Oil: 0.65 m³ Kfodpfx Aaeuqrd Ts Eja

Condition: ready for operation (used), Technical characteristics Used boiler Compte-R Type CFC 1000 Control cabinet Thermostats, aquastats, thermometers and probes Chip feeder Injection fan Kfodpfxjt U Ugxj Aa Eea Dust collector Fan Connection hopper Thermal power of 990 kW Suitable for the combustion of sawdust and shavings from carpentry and for use in a workshop heating system Power and Motors Pluging: Three-phased Overall dimensions

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Mot. tank-boiler turning device with rail trolley Technical data: - Total payload driven + travelling unit 40000 kg. - payload per vessel device 20000 kg Kfsdpfx Aashcnhmj Esa - workpiece diameter approx. 500 - 3500 mm - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm - roller width 150 mm - driven unit with drive on both sides - infinitely variable rotational speed - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Year of construction: 2009, condition: reconditioned (used), steam ketlle Getinge M3 with mixing arm. Power 45kW 380V. Audit after full renovation. In offer kettle 100/150/ Kodpfexpq Nrjx Aa Esfa

Condition: used, Humidifier, Humidifir, Humidificateur, Hymidificador, Steam Cylinder Kfjdpfjpb Ea Eox Aa Eea -Manufacturer: HygroMatik, steam cylinder for steam humidifiers/steam generators -Type: unfortunately without type designation -Accessories: including 6x electrics / 1x sensor electrics installed, see photos -Quantity: 2x containers available -Price per piece -Dimensions Ø 372 x 660 mm -Weight: 7.6 kg

Condition: good (used), tem: D-7856-Samson-steam Valves Kfsdpfeirfb Esx Aa Esa Diverse steam valves made by Samson complete with control box! For more informations please contact us! DN 20/DN40/DN50/DN65/

Condition: ready for operation (used), Year of construction: 2011, A Jumag steam generator including a Weishaupt burner is available. 1) Jumag DG 360 rapid steam generator, year of manufacture: 2011, volume: 60l, test pressure: 12bar, max. operating pressure: 13bar, max. temperature: 220°C, max. firing capacity: 245kW. 2) Weishaupt WM-G10/1-A Monarch burner, year of manufacture: 2011, capacity range: 65kW-310kW, connection pressure range: 15mbar/500mbar, gas type: bio. The system was in operation for only 3 years. Documentation available. An on-site inspection is possible. Kodpfx Ajxd Au Aea Eefa

Condition: excellent (used), Carel HeaterSteam UR020HL10S isothermal steam humidifier The Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. Kfedju Eb A Nopfx Aa Eea It produces steam by heating heating elements immersed in a steam cylinder filled with water. This can be regular tap water or fully demineralized water. The heat generated by the heating elements heats the water to a temperature of 100°C. Technical specifications: Dimensions: (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Power supply: 400 V/3 Steam pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4" G male Steam distribution For optimal humidifier performance, the produced steam must be distributed evenly throughout the room to avoid droplet formation and condensate accumulation. This can be achieved either with vented steam distributors or steam lances. The choice of steam distributor depends on the room into which the steam is to be introduced. For direct room humidification (in rooms, factory halls, etc.), vented steam distributors (optional) with a motorized fan should be used. However, if steam is to be distributed via ducts or air handling units, Steam lances are used, which utilize the speed of the air flowing through them for humidification. You can find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 1985, condition: good (used), machine/vehicle number: XXXX, Lg.No. 21392 Technical data approx: - Total payload driven + travelling unit 25000 kg - payload per container device 12500 kg - workpiece diameter approx. 500 - 4000 mm - center distance of the support rollers adjustable - roller diameter 400 mm - roller width 120 mm - infinitely variable rotation speed - manual remote control for Re- and Li.-run Kfedjk Eatdepfx Aa Eoa - drive 400 V - space requirement attached unit approx. W 3500 x H 850 x D 1000 mm - space requirement with running unit approx. W 2700 x H 850 x D 800 mm - Weight of driven unit approx. 1300 kg - Weight with running unit approx. 900 kg

Condition: used, Steam trap, ball float, steam trap ARI Cona, ball float steam waste Kjdpfertcfbsx Aa Ejfa -Manufacturer: ARI, float steam trap with flanges -Type: CNU R4 -Connection: DN50 PN16 -Dimension: 275/230/H365 mm -Weight: 23.2 kg/pc.

Year of construction: 1980, condition: good (used), Offer 15107 Technical data: - Total payload driven + travelling unit 60000 kg. Ksdpfskqxn Dox Aa Eefa - payload per container unit 30000 kg - workpiece diameter 500 - 4000 mm - Adjustable center distance of the support rollers - Support rollers made of steel - roller diameter 650 mm - roller width 200 mm - infinitely variable rotation speed - manual remote control for Re- and Li.-run - drive 400 V - space requirement attached unit approx. W 5100 x H 1000 x D 1500 mm - space requirement with running unit approx. W 3500 x H 1000 x D 1000 mm - Weight of driven unit approx. 4500 kg - Weight with running unit approx. 3300 kg

Condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, control, air humidification, dehumidification and evaporative cooling -Module: M4 (large display) -for: Condair CP2 -Type: M4 Kjdped Tq Rxefx Aa Esfa -Weight: 0.3 kg

Year of construction: 1998, condition: good (used), Offer 23126 Technical data: - Total payload driven + travelling unit 20000 kg. - payload per container device 10000 kg - workpiece diameter approx. 500 - 3500 mm - center distance of the articulated support arms man. adjustable - Roll diameter 4 x per support arm 250 mm each - roller width 4 x each support arm 80 mm - infinitely variable turning speed approx. 100 - 1500 mm/min - manual remote control for Re- and Li.-run - drive 400 V - space requirement with running unit approx. W 1700 x H 1100 x D 1000 mm - space requirement with running unit approx. W 1700 x H 1100 x D 700 mm - Weight attached unit approx. 1400 kg - Weight with running unit approx. 1000 kg Kedpjnwmt Isfx Aa Eofa