Used Spot Welder for sale (1,723)

Condition: used, DALEX Spot Welding Machine Type SF 204 Machine No. AZA/N-32865 Year of Manufacture 2010 Power at 50% duty cycle: 30 kVA Continuous power: 21.2 kVA Maximum short-circuit power: 108 kVA Maximum welding power: 86.4 kVA Throat 500 mm Arm distance 350 - 500 mm Electrode force: 65 - 360 kp (short throat) Electrode force: 25 - 140 kp (long throat) Electrode arm Ø 45 mm Pedpfx Ahoit Rq Helspt Electrode holder Ø 25 mm Electrode stroke 20 mm Welding capacity: Steel sheet 5 + 5 mm / max. 6 + 6 mm Brass sheet 2 + 2 mm / max. 3 + 3 mm Aluminum sheet 1 + 1 mm / max. 1.2 + 1.2 mm mm CrNi 1 + 1 mm Round steel 12 + 12 mm / 16 + 16 mm Open circuit voltage 5.2 volts Connected load 55.2 kVA Mains connection 400 volts, 50 Hz - Multifunctional welding control system with Dalex RS 15 microprocessor - Lower electrode arm with swivel fitting for height adjustment and lateral swiveling - Foot pedal operation - Water-cooled (cooling water requirement 4 liters/min.) Space requirement L x W x H 1250 x 415 x 1200 mm (height = 1310 mm with base) Weight 196 kg Very good condition

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Electrode holder Ø 25 mm Ppedpfx Ahjy N Dukelot Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Rated power at 50% duty cycle: 20 kVA Max. welding power: 40 kVA Adjustable reach: 280 to 550 mm Electrode stroke: 15 to 85 mm Welding parameters for sheet steel: approx. 4 + 4 mm Electrode force adjustable up to 240 daN Cooling water flow 3 l/min Weight approx. 122 kg Welding controller T 90 Mark II Operating instructions and manual available Working stroke triggered by pneumatic foot pedal We have cleaned and inspected the spot welder, the condition is very good, looks like new. Podpfx Asy A Hr Sohlopt

Condition: good (used), functionality: fully functional, We offer for sale a complete line for multi-point automatic welding of SCHLATTER brand steel wires. We have three fully operational production lines. Psdpfx Aetvpilehlopt There are also automatic machines for the production of transverse wires (so called slitting machines with a cutter). We also have a number of single point welding machines for steel wires.

Condition: used, MF welding machine with water-cooled spotter Medium frequency spotter Manufacturer: TECNA (Italy) Type 3670 E CF00 Serial no.: Year of construction 2014 Rated welding power 25 kVA Max. welding power 160 kVA Power supply 400 Volt, 50 Hz - Welding controller TE750 or TE760 Ppodpfx Aheg U A Uzoljt - Spotter for single-sided spot welds - Ideal for bodywork repair with excellent weld quality - Water-cooled type 2BHPLN - Mobile transport trolley Weight approx. 155 kg Very good condition - as new

Condition: excellent (used), Welding current max.: 5kA Welding force: 45-150N Podpfx Ahetq Ez Eslspt Closing stroke: pneumatic Welding pressure: pneumatic, resetting unit with disk spring Force adjustment: Proportional valve Electrode shape: cylindrical, 6mmØ --- Welding control: optional (according to recommendation) --- equipped with: - Base body with welding heads on aluminum - Modular design - Electrodes top and bottom with feed cylinder - Welding head top F120K with repositioning unit - pneumatic valve units - Pneumatic air cooling unit for electrodes - Workpiece carrier on dovetail guide, for exact positioning to electrodes positioning to electrodes --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Column-type spot welder PEI MOD. PBP 126 PX Year of manufacture: 2006 CE PEI POINT pneumatic spot welders are user-friendly and ideal for welding all types of metals. This machine is foot pedal operated with pneumatic drive and offers a maximum welding power of 25 kVA. The machine is also equipped with water-cooled electrode holder, electrodes, arms, and transformer. The upper arm is depth-adjustable and the lower arm is height-adjustable. Used • Pneumatic foot pedal operation • Maximum welding power: 25 kVA • Maximum capacity: 2.0 mm • Electrode force: 165 dan • Throat/Arms: 580 mm • Depth-adjustable upper arm • Height-adjustable lower arm • Steel frame Pedpjw T Tlfefx Ahlopt • 400 V, 50 Hz

Condition: good (used), Good working condition. Please check out our other listings as well. Ppjden Uv Ulopfx Ahlst

Condition: excellent (used), Ultrasonic welder, Ultrasonic plastic welder, used machine Manufacturer : Branson Type :900 AES series actuator Overall dimensions : 1200 x 810 x 2410 mm Machine dimensions : 420 x 700 x 1470 mm Control dimensions : 450 x 450 x 180 mm Weight : 167 kg Frequency : 20 KHZ Ppedpfx Ajt H Nhuohlst Power : 1000 W Maximum stroke length : 100 mm

Condition: used, Year of construction: 2012, manufacture NIMAK electric cabinet Rexroth - Bosch Group dimension div. verfügbar We offer approximately 100 spot welding guns in various sizes. Application: Automotive bodywork Podoxrg Ebjpfx Ahlept Each welding gun is sold as a complete unit, including control unit and control cabinet. The photos show a selection of different models. Year of manufacture: approx. 2012/2013 The welding guns are offered at individual prices. In our assessment, the goods are in good to very good used condition and can be inspected at short notice by appointment. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 1,000 mm, welding current (min.): 40 A, welding current (max.): 420 A, ESS Powermag 461 – Water-Cooled MIG/MAG Double wire feed 3 Months Warranty Refurbished, tested, serviced, and ready for immediate use. Specifications: 40-420 AMP 380 Volt Water-cooled Synergic 2/4 Step / 4 Roller drive Double Wire Feed 36 Steps adjustable Spot welding Fixed programs Including 2 MIG PRO5000 welding torches, earth work cable with clamp, gas cable, and +- 3 Meter Interconnection hose. Visits by appointment only. Psdpfxoy Udx Te Ahlept Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), Hydraulic press TCS - 150T MACH-ID 8821 Manufacturer: TCS Type: 150T Control system: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load sliding table 20000 Kg Table load upper table 9000 kg Table out feed stroke 2100 mm Column diamater 180 mm Closing force 1500 Kn Opening force 700 Kn Laser safe CE Safety Power 15 kW Specifications Metric US Standard Distance between uprights 2000 mm Installation height 2000 mm Table length 1500 x 2000 mm ram stroke 1800 mm Starting speed Psdjulwzmopfx Ahlept 50 mm/min. Working speed 8 mm/min. Return speed 50 mm/min. Table rotation 0 - 270 rpm Table rotation 0 - 180 ° Dimensions (estimation) length 4800 mm width 5600 mm height 5200 mm Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2002, Manufacturer: Millutensil Type: MIL 203 Control: Siemens SIMATIC OP7 Year of manufacture: 2002 Pressure 0 - 250 Bar T Size T-22 Opening force 35 Ton Closing force 150 Ton Distance between columns 2130 mm Table height above floor 770 mm Upper table rotation 180 degrees Specifications Metric US Standard Capacity 30000 Distance between the columns 2130 mm Table length 2000 mm Table width 1500 mm Table height 1500 mm Run-in speed 3900 - 4800 mm/min. Working speed 480 mm/min. Return speed 2100 - 3000 mm/min. Dimensions (approximate) Length 6150 mm Ppodpfxswpkv Ij Ahlot Width 3500 mm Height 4800 mm Weight 28000 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details.

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Specifications Metric US Standard Distance between uprights 930 mm Installation height 760 mm Table length 755 x 755 mm ram stroke 600 mm Starting speed 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Ppjdperr Ui Rofx Ahlot Table rotation 360 rpm Dimensions (estimate) length 1350 mm width 1350 mm Height 2000 mm weight 1500 kg

Condition: used, Welding transformer, high-current transformer, transformer for spot welding machines, resistance welding machines, roll seam welding machines Ppjdpfjdzp Txox Ahlot ELREX Type 3x ET70.0.G Mfg. No. Year of manufacture approx. 1990 Consisting of three water-cooled transformers with a water-cooled rectifier block Performance data: Total power at 50% duty cycle 210 kVA (total power from 3 transformers) Secondary voltage 7 - 10.5 volts (adjustable in 4 steps via connection terminals on the transformer) Secondary current at 50% duty cycle 20.1 kA (total power from 3 transformers) Primary connection 380 volts, 50 Hz (three phases) Consisting of three transformers - data for a single transformer: Power at 50% duty cycle 70 kVA (power per transformer) Secondary voltage 7 - 10.5 volts (adjustable in 4 steps via connection terminals on the transformer) Secondary current at 50% duty cycle 6.7 kA (per transformer) Primary connection 380 volts, 50 Hz (two phases) Cooling water requirement per transformer 4 liters/min. Insulation class F - Water-cooled transformer - A water-cooled rectifier block is located on the secondary side. - Connection of the DC power output via contact surfaces 50x50mm with M20x1.5mm thread - Temperature monitor on each rectifier element and on each transformer coil - Connection cable 7-core, cross-section 50 mm², length approx. 6 m Overall dimensions WxHxD 700 x 710 x 440 mm Total weight 480 kg in good condition

Condition: used, current capacity 8,0 kVA Pjdey Ty Dcjpfx Ahlopt throat 80 - 480 mm contact pressure capacity 17 - 235 daN horn spacing 140 mm mm rated capacity 8,0 kVA voltage 380 V total power requirement 17,8 kVA weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2

Year of construction: 2019, condition: refurbished (used), machine/vehicle number: DF0137, pressure:120 t table length:600 mm Ppedsffamtepfx Ahlst table width:600 mm stroke max.:400 mm dimensions:1070 x 2340 x 2800 mm weight:4,2 t pre-running speed:10 mm/sec :26 mm/sec :200 l Oil cooling (electric):1,5 kW (max) table height:875 mm Working height from to:500 mm diameter of piston:230 mm total power requirement:15 kW pump capacity:24 Lt./sec Pressure power:300 bar :76 mm :650 mm capacity of ejector in table:20 t :150 mm Recommended oil:46er

Condition: used, Year of construction: 1960, Technical details: current capacity: 60 kVA throat: 680 mm arm distance: 115 / 415 mm Podpfsu Nv Emjx Ahlept pincer opening adjustable: 180 mm rated capacity: 60 kVA welding power: 71 kVA electrode capacity: 100 bis 600 daN voltage: 380 V / 50 Hz V air pressure: min./max.: 6 / 10 bar cooling water consumption: 12 l/min weight of the machine approx.: 685 + 200 kg connection voltage: 380 V / 91 A V rated capacity: 60 kVA connected load: 54 kVA dimension L-W-H: ca. Maschine: 1.700 x 850 x 1.750 mm dimension L-W-H: ca. Aggregat: 900 x 650 x 1000 mm POINT WELDING MACHINE - WELDING TRANSFORMER Direct current three-phase welding machine Application: Spot, projection and series spot welding Maximum short-circuit power 89 kVA Primary short-circuit current 135 A Secondary current = short-circuit current: 25 kA and welding current max. 20 kA Electrode stroke max. 90 mm; electrode force min./max.: 100 daN / 600 daN Stroke sequence max. with 10 mm stroke 400 strokes/min. Spot fitting: electrode holder Ø 30 mm, adjustable 180 mm, arm distance = min./max.: 115 / 415 mm 2-fold foot switch Cooling unit, mobile = movable on wheels, connection power 1.45 kW, pipe connection R 3/4 inch, coolant R22 *

Condition: used, Technical details: current capacity: 100 kVA throat: 600 mm arm distance: 600 mm control: Bosch Programmier-Feldbusse pincer opening adjustable: 240 - 540 interface: RS 485 voltage: 500 V connection voltage: 380 V air pressure: 6 bar cooling water consumption: 14 l/min weight of the machine approx.: 770 kg space requirements of the machine approx.: 1,5 x 0,95 x 2,1 m SPOT WELDING MACHINE - WELDING TRANSFORMER Application: Spot, projection and series spot welding 1 - 1000 Hz Lifting cylinder electrode force 11 daN PSI 6000 medium frequency inverter with integrated control function (50/60 Hz AC mains voltage) Electrode arm Ø 35mm Electrode holder adjustment 200mm (manual) Arm distance min. 240mm max.: 540mm Manual adjustment Ppsdpfx Aheu Nv Eajlst Operation via Rexroth IntraControl VCP05 control panel and foot switch incl. replacement electrodes (water-cooled) external Rittal water recooling unit SK3320.609 *

Condition: used, MIG / MAG Pulse Gas-Shielded Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Output: 330 amps = 50% duty cycle (DC) 300 amps = 60% duty cycle (DC) 210 amps = 100% duty cycle (DC) Stepless adjustment range Open circuit voltage approx. 50 V Open circuit voltage approx. 30 V Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and amperage - Pulse welding function - Various welding programs selectable Welding methods: MIG/MAG/TIG (programmed and manual modes) 2-stroke, 4-stroke, 4-stroke special, and spot welding - Welding control with program memory and disk drive for external program storage - Separate 4-roller wire feeder FRONIUS Type VR 152 with connecting hose package approx. 1.5 meters - 4-meter BINZEL hose package with central connection - External Fronius water cooling unit Type FK 71 - Welding gas pressure regulator - Supplied with 1.2 mm welding wire Space requirements (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Ppjdpoyv H Elsfx Ahlot Good condition – fully functional – ready for demonstration

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Pedpfx Aehpf Iyshlspt Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Ppedpfx Asycv Saohlet Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Pedpfodzp Tcex Ahljpt Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Year of construction: 2018, condition: good (used), Fully automatic angle welding machine / Fully automatic side welding machine Manufacturer: Diez Type: AWS-C 9070 CS Ppodpfx Aotzcd Sjhljt Year of manufacture: 2018 Shrink tunnel Manufacturer: Diez Type: HTC 122-40D Year of manufacture: 2018 Operating side: Left, in the direction of travel Passage width: approx. 600 mm Passage height: approx. 190 mm Welding length: approx. 900 mm Working height / belt height, infeed/outfeed: approx. 860 mm + 100 Performance: Up to 30 cycles/min (depending on package size and feed speed) Connection voltage: 230V AC, 50Hz, 1 phase + N + PE Power consumption: 3.5 KW Rated current: 10 A With cable and 16A Schuko plug Compressed air connection: 6 bar External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm 19526

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: PS1/9173/9169/2, type of input current: three-phase, input voltage: 400 V, overall weight: 775 kg, electrical fuse: 105 A, compressed air connection: 5 bar, This Schlatter PS 130 is a robust, industrial spot welding machine renowned for its reliability in metal welding applications. Psdpfxoy Snycj Ahljpt