Used Splinters Separator for sale (5,770)

Condition: used, Dust Cyclone, Dust Separator, Used machine Dksdpfxext Tw Hs Ag Dsk Overall dimensions: 1200 x 1150 x 3270 mm Inlet side: 280 mm Outlet side: 250 mm Cylinder shell height: 800 mm

Condition: excellent (used), Year of construction: 2011, We are selling 2 pieces of Alpha 1200 separators, year of manufacture 2011. Dodslpafdjpfx Ag Dokk New rotors installed.

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Dkodjdzqn Uopfx Ag Dok Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: used, Hydr. scissor lift table WEIDMANN type E5/13-1 Serial no. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Lift max. 1280 mm Overall height - table bottom 290 mm Overall height - table top max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Djdpfx Agjhlnzno Dokk Motor power 1.5 kW Mains connection 400 Volt, 50 Hz. - Rotary switch on the hydraulic unit for up and down - Infinitely adjustable lowering speed via throttle valve - 1 lifting cylinder - Hydraulic unit built in 2007 with tank opposite - Safety protection frame with limit switches dead weight 660 kg good condition

Condition: excellent (used), Year of construction: 2012, operating hours: 1,522 h, Fish / Meat Bone Separator Make: Sepamatic Model: 2000VT Built 2012 Dkjdpfxoyckiaj Ag Djk Low running hours: 1522 supplied with 2 drums

Year of construction: 1998, condition: used, functionality: fully functional, We are offering this used mobile tramp oil separator from SISTO GmbH. It is pneumatic-operated and designed for cleaning coolant and separating tramp oil from coolants. If you have any questions or require further information, please feel free to send us a message. Dedpoyxngiefx Ag Dskk

Year of construction: 2018, condition: new, functionality: unexamined, – For removing foreign matter from municipal and industrial sludge and from process water – Continuous screening, dewatering, and discharge of foreign matter in a single operation - Compressor for compressed air generation - Electrical technology, Strainpress control and switchgear panel Process data: - Sludge type: digestate from wet anaerobic digestion of biowaste - Sludge quantity: expected 8–10 m³/h - Solids content in feed (average/max): 4–6% DS (dry solids) Dsdsyvhr Hspfx Ag Dekk - Screen/slot size for preliminary screening: 12 mm Performance data: - Number of machines: 1 (1 in operation/0 standby) - Throughput per machine: expected 8–10 m³/h - Solid throughput per machine: 4–6% DS

Year of construction: 2012, condition: used, functionality: fully functional, For sale are 3 ballistic separators from the company Hartner. The price is per unit. Two of them are currently still integrated in our production and can be inspected on site. The dismantling is planned for around early June 2026. All technical data can be found in the pictures. If you have any further questions, please do not hesitate to contact us. Dsdpfx Asyrngujg Dokk

Condition: good (used), Year of construction: 1982, machine/vehicle number: 3102, Meijn egg-shell centrifuge For separating eggshells from liquid egg by processing whole eggs. 30,000 eggs/eggshells per hour 2.2 kW Dimensions (L x W x H): approx. 1150 x 750 x 1750 mm (can be lowered by approx. 350 mm) Dksdsylbu Ejpfx Ag Dek Good working condition.

Condition: repair required (used), Year of construction: 2007, Color separator Separation & Sorting Technology Gmbh Year 2007 Missing sensors Available catalog Djdpfx Agou Icgbe Djkk

Condition: new, Year of construction: 2025, functionality: fully functional, Rotating drum separator with rollers Type: PVC rollers Ø450 x L650 mm Frame Base frame made of 80×40 mm anodised extruded aluminium profile 3 mm thick aluminium lateral/front safety covers and discharge hopper 5 mm removable polycarbonate cover 3 mm thick aluminium infeed chute (height and angle adjustable) Dedoyynaxopfx Ag Dokk 4 Nylon drum support wheels Stand Drum inclination angle adjustable via galvanized steel hinge 70x30 mm galvanized tubular steel legs (height adjustable every 30 mm) Painted steel base with integrated mounting bracket Ø80 mm castors with/without brake (2+2) Rotating drum Ø450×650 mm 10 pairs of PVC or stainless steel rollers with individual (single-screw) roller adjustment Adjustable separation gap from 0 to 31 mm Drive Direct drive three-phase asynchronous motor 400Vac-50Hz-3Ph Control panel On/off, emergency stop, thermal overload protection

Condition: used, This listing is for a SWECO PH06 Pharmaceutical Separator with matching SWECO Adjust-A-Vibe Control SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFFF049 Listing name: SWECO PH06Y2 Pharmaceutical Separator Dsdpfxexzia He Ag Dskk

Year of construction: 2014, condition: used, We are offering this used IFE Aufbereitungstechnik GmbH MPQ 750 overband magnetic separator, year of manufacture 2014. Dodpeyxrpnofx Ag Djkk If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Marvel Townsend StorkDMM50 meat bone separator to produce best quality low pressure deboned meat when used in conjunction with a Baader or SEPAmatic. This machine has come direct from a closed meat factory in Scotland. Almost impossible to find these machines on the used market. Dodpelkc I Rjfx Ag Dskk

Condition: used, Dust Cyclone, Dust Separator, HLZ-J 1600, used machine Manufacturer: HLZ-J 1600 Volume flow: 14,000 Bm³/h Dkodpfeyuzhwex Ag Dek Suction side: 400 mm Height: 5853 mm Diameter: 1695 mm Year: 2013

Condition: good (used), Year of construction: 2010, Sepamatic 2000 T Separator SEPA 2000T separator, ideal for recovering meat from bones and separating soft tissues from hard ones. The device is characterized by high efficiency, which makes it an indispensable element in food processing. Dksdpfx Agoyhmk De Djk Manufacturer: Sepamatic Model: Sepa 2000 T Year: 2010 Drum Size: 1,3 mm Power: 7,5kW / 50Hz / 400V Capacity: Up to 4.000 kg/h (depending on product) Machine Dimensions LxWxH: 1.300x1.300x1.700 mm Machine Weight: 1.400 kg.

Year of construction: 1992, condition: used, Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 125 Engine type: 1130-1190 Year of construction: 1992 Power: 125 m ³/h Dkodpfxsb Swr Ne Ag Dsk Speed: 1000 rpm KW: 2.7

Condition: used, Lamella separator 2 pieces identical in construction: - Manufacturer and year of manufacture unknown (probably late 70s) - Rectangular design, with discharge screws to the funnel Dedpjt Ay Scsfx Ag Djkk - Dimensions: Length 9700mm, width 3500mm, height 6100mm

Year of construction: 2017, condition: used, Manufacturer : Eclipse Magnetics Model : Housed Grid ECHD150 Type : Housed Easy Clean Grid Magnetic Separator Year: 2017 Atex : Ex II1/2DcTX + II1/2GIICcTX Input / output : Ø 150 mm Machine dimensions with base: 100 x 90 x 120 cm Machine dimensions without base: 208 x 214 x 270 mm Weight : 40 kg Dodpfxsx R D H Ae Ag Dekk

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP Dkodpfeppyhtjx Ag Dek dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Year of construction: 2026, condition: new, functionality: fully functional, power: 1.4 kW (1.90 HP), overall weight: 880 kg, total length: 2,600 mm, total width: 1,250 mm, total height: 1,760 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The FlexScreen delivers efficient separation, classification, and sizing of bulk materials in industries such as mining, recycling, construction, and aggregates. Customers benefit from precise sorting, continuous operation, and a low-maintenance design that reduces downtime and operating costs. Key Features: • Robust, stabilized frame for controlled vibration and accurate material flow • Modular design with interchangeable screen inserts for flexible configurations Djdpsxdwdxsfx Ag Dskk • Durable, low-maintenance construction with easy access to wear parts • Reliable drive system for steady performance and consistent product quality Tech Highlights: L 2.6 m · W 1.25 m · H 1.76 m · Qmax 10 m³/h · Max. bucket W 0.8 m · Power 2 × 0.7 kW · Screen area 0.9 m² · Weight 880 kg · Voltage 400 V

Condition: ready for operation (used), Year of construction: 2016, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 27 / 16, overall weight: 1,500 kg, power: 2.2 kW (2.99 HP), space requirement height: 4,150 mm, space requirement length: 5,100 mm, space requirement width: 2,000 mm, The machine is easy to operate, highly efficient, and not only threshes leaves but also partially separates them from stems and classifies them. It delivers excellent processing results for mint, lemon balm, sage, thyme, oregano, and rosemary. The machine can be operated in two different modes: as a threshing and crushing machine or as a vibrating separator. This is a major advantage, as it allows two processing steps to be covered with one machine. 1. Threshing and Crushing Operation To operate the REBLER LGU 304, a conveyor belt is required. The material is fed by a VARIO 608 conveyor belt into the threshing and crushing section, where the leaves are separated from the stems and the material is sorted into five different fractions. 2. Vibrating Separator Machine use for separation: The machine functions as a vibrating separator by simply changing the conveyor belt angle and feeding the material through the first opening. The machine is equipped with four sieves and enables classification of the processed material. Sieve changes are quick and easy. Sieve sizes: 17 sieves (12 mm, 10 mm, 8 mm, 6 mm, 5 mm, 3 mm, 2.5 mm, 2 mm, 0.8 mm, 0.5 mm, 0.3 mm, NLC 10x4, MLC 12x18/6, NLR 54x82/18, NLR 22x44.5/12, NLC 54x82/18 & LPC 20x40, NLC 15x24/8) and five additional PETERSON sieves for FS 3004 Dkedpfx Aeyl T Aneg Dok Technical Data LGU 304: Dimensions (L x W x H): 5,100 mm x 2,000 mm x 4,150 mm Sieve length: First, second, and third sieve: 2,800 mm; fourth sieve: 2,650 mm Sieve width: 950 mm Number of sieves: 4 Approximate machine weight: 1,000 kg Total electric motor power: 2.2 kW Voltage: 380 V Electronic control: 2.2 kW LG 304 LEAF REMOVER ADAPTER Electric motor power: 1.5 kW Infeed roller drives: 2 x 0.55 kW Voltage: ~ 380 V Inclination angle adjustment: Continuously between 20 and 40 degrees LGU Screening machine FS 3004 with threshing and rebbler section Individual components: - VARIO 608 conveyor belt with dosing hopper (infeed conveyor) - FS 3004 screening machine with sieves and vibration control - Threshing and rebbler section with PA drums for FS 3004 - TRIPLE 202 conveyor belt (discharge conveyors) - Control cabinet - Covers for FS 3004 VARIO 608 conveyor with feeder Year of manufacture conveyor: 2020 Year of manufacture LGU: 2016 If you have any questions or would like to arrange a viewing, we are available at any time. Shipping by freight forwarder is possible upon request.

Condition: ready for operation (used), Good condition. Ready for immediate use. Mobile unit Pressschbeckenseparator M1301 with extra cutting filter SF 300 M1708. Equipped with 2 installed rotary lobe pumps D-SW 70 and conveyor belt. Mounted on a Humbaur 3.5 t trailer. New inspection (TÜV). First registration 12/2020. 887 operating hours. Djdsx R Efajpfx Ag Dokk

Year of construction: 2014, operating hours: 20,000 h, condition: used, machine/vehicle number: S410041, Used Optical Separator TiTECH - TOMRA Model Autosort-4 (NIR1) (S-2800) (X-H) Acceleration belt working width: 2800 mm Control cabinet with complete control system Including subframe, platforms, and stairs Plant already dismantled, inspection possible at any time. Dodpfx Ageyh Afho Dskk

Year of construction: 1998, condition: good (used), Material separator, material selector, filter system, material separator, metering rotary valve, rotary valve, metering valve, rotary valve, conveying technology Dsdpfxex Td Ilj Ag Djkk -Manufacturer: Höcker Polytechnik, material separators for paper, cardboard, corrugated board ... -Type:PMA-U -Drive: 0.75 kW -Inlet: 590 x 610 mm -Injection air volume: max. 12000 m³/h -Technical data: see photo of the nameplate -Transport dimensions: 2020/1340/H2000 mm -Weight: 878 kg