Used Spindle Router for sale (12,481)

Year of construction: 2023, condition: ready for operation (used), Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Z1/Z2: 700mm/720mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8200kg, control: Fanuc 31i-B, operating hours: 1407h, spindle hours: 343h. Includes transformer and chip conveyor. Documentation available. An on-site inspection is possible. Hjdoxaphuepfx Afnsfc

Year of construction: 2023, condition: ready for operation (used), Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Y: 100mm, travel Z1/Z2: 700mm/702mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8400kg, control: Fanuc 31i-B, operating hours: 1565h, spindle hours: 506h. Includes transformer, chip conveyor, filter system, and cooling unit. The cabin door window is broken. Documentation available. An on-site inspection is possible. Hfedpfx Asxaphnofnec

Year of construction: 1994, condition: ready for operation (used), There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible. Hfodpfxourwy Nj Afnec

Condition: ready for operation (used), Year of construction: 2010, Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline. Hfjdpfxotqfq Uj Afnoc

Condition: ready for operation (used), Year of construction: 1997, A Mori-Say 6/32M multi-spindle curve lathe is available. Number of spindles: 6, max. spindle speed: 3750 rpm, max. bar diameter: 40mm. Dimensions X/Y/Z: approx. 6200mm/1600mm/2050mm, weight: approx. 9500kg. Hfodpotqfq Rsfx Afnsc

Year of construction: 2006, condition: ready for operation (used), A screw press is available. Working capacity: approx. 64kNm, max. stroke: 250mm, nominal pressing force: 650t, max. pressing force: 750t, impact stroke: approx. 900t. Spindle diameter: 290mm, number of spindle starts: 3, max. stroke adjustment: 150mm, stroke rate: approx. 30min⁻¹. Frame opening: 730mm, max. installation height: 720mm. Ram area X/Y: 700mm/700mm, table area X/Y: 720mm/740mm. Machine dimensions X/Y/Z: approx. 4400mm/3150mm/2000mm, machine weight: approx. 30000kg. Upper and lower platen available. An inspection on site is possible. Hfjdsxxl Nfepfx Afnjc

Year of construction: 2002, condition: ready for operation (used), A CNC multi-spindle lathe Index overhauled in 2020 is available. Number of spindles: 6, max. bar capacity: 32mm, spindle speed: 6300rpm, weight: approx. 10800kg, control: Siemens Sinumerik. Bearing condition measurement 2024 HS1: 14.35, HS2: 15.45, HS3: 10.37, HS4: 11.16, HS5: 17.44, HS6: 7.54. The machine has undergone extensive repairs to the spindles, cooling system, bearings, hydraulic lines, etc. Documentation available. Documentation available. On-site inspection is possible. Hodjwr Dw Rspfx Afnofc

Year of construction: 1992, condition: ready for operation (used), Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible. Hfedpfsx Tum Sox Afnjc

Year of construction: 2009, condition: ready for operation (used), Travel X/Y/Z: 2200mm/520mm/510mm, rapid traverse X/Y/Z: 40m/min, number of spindles: 2, speed: 10000rpm, spindle power: 22kW, spindle bearing: 95mm, max. torque: 300Nm, tool holder: HSK A100, max. milling capacity: 500cm³, max. drilling diameter: 50mm, max. thread diameter: M36. Table dimensions X/Y: 2x 1250mm/250mm, spindle table distance min./max.: 250mm/760mm, max. workpiece weight: 2x 1500kg, max. tool length: 320mm, tool positions: 2x 21, tool clamping: 45000N. Dimensions X/Y/Z: approx. 4000mm/6500mm/3800mm, weight: approx. 11000kg, operating hours: 37771h. Including sheet metal technology SHA KMB 900, volume: 900l, and magnetic plate. Documentation available. Hsdpst E Tp Tjfx Afnjfc

Year of construction: 2018, condition: ready for operation (used), A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible. Hsdpfx Afju Dm Izensfc

Condition: excellent (used), Year of construction: 2004, Please read the technical specifications thoroughly. If you are considering this machine as a potential investment, we kindly request your complete credentials with an accurate telephone number and email address in order to submit an offer. We are offering an exceptionally high-quality precision lathe. In its class, this is arguably the best German lathe ever built. BOEHRINGER Precision Lathe Model DUE 500 Year of manufacture: 2004, incl. CE certificate and central lubrication Machine no.: T1022.2027-00 Centre height: 240 mm Swing over bed: 500 mm Swing over cross slide: 285 mm Centre distance: approx. 1,200 mm Turning length (effective): approx. 1,000 mm Bar capacity: 62 mm Spindle nose: DIN 55027 size 6 Spindle diameter: 100 mm Hfodpfx Ajw Rdthefnjc Drive power: 11 kW Max. torque: 2,000 Nm 24 spindle speeds: 11.2 – 2,240 rpm 60 cross feeds: 0.03 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Tailstock quill travel: 190 mm Tailstock taper: MK 5 Space requirement: approx. 4,000 x 1,525 mm (L x W) Weight: approx. 4,300 kg Accessories included: - 3-axis digital readout HEIDENHAIN - Central lubrication - Electrically interlocked chuck guard - Coolant system - Chip protection rear wall - Röhm lathe chuck T 250 mm incl. various clamping jaws - Telescopic cover for leadscrew and support to bed - Machine lamp - Multifix C tool post + 4 holders - Live centre - Operating manual - Circuit diagram - Rapid traverse in longitudinal and cross slide Condition: The machine is in very good technical and visual condition. Backlash in cross slide: approx. 0.3 mm, top slide: approx. 0.15 mm Spindle nose runout: approx. 0.006 mm Bed geometry: deviation approx. 0.01 mm over 750 mm of bed length (measured on flat guideway with dial indicator towards the chuck) The following parts have been renewed: - Oil change - New hoses for central lubrication - New wipers - Key for engagement lever replaced - Locking pin for engagement interlock replaced Net price EXW. Delivery with our own truck can be offered for an additional charge.

Condition: excellent (used), Please read the technical specifications thoroughly. If you are considering the machine as an investment, we kindly request that, for an offer to be made, you provide full identification along with a correct phone number and email address. EMCO Precision Lathe EMCOMAT 17 D Including 3-axis EMCO digital display Year of manufacture: 2007 with CE marking Centre distance: 700 mm Centre height: 170 mm Swing over bed Ø 340 mm Swing over cross slide Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Carriage guide length: 380 mm Turning tool cross-section: 20 x 20 mm Distance from turning centre to top slide: 34 mm Top slide (compound) swivel range: 60 / 120° Main spindle: Spindle mounting: DIN 55029 (Camlock) Spindle bore: Ø 50 mm Internal taper to DIN 7178 1:22 Front bearing spindle diameter: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. face plate diameter: Ø 200 mm Spindle speeds: 40 - 3000 rpm Stepless speed control Number of mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. nominal torque at drive spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045 - 0.787 mm/rev 20 (28) cross feeds X: 0.023 - 0.406 mm/rev Threads: 20 (28) metric threads (standard) Pitch: 0.4 – 7.0 mm Tailstock: Quill diameter: Ø 50 mm Quill internal taper: MK 3 Quill stroke: 120 mm Offset: ±13 mm Permissible workpiece weights: (between centres) 50 kg, supported by tailstock 150 kg Weight: 755 kg Hedpfx Afjxx S R Asnjfc Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe suitable for all areas of mechanical engineering and vocational training. Equipment: - EMCO 3-axis digital display with colour screen - Potentiometer, EMERGENCY STOP button, speed digital display on control panel next to digital display - 3-jaw chuck - MULTIFIX tool post head size B - Electrically interlocked chuck guard - Quick-collet clamping device - MICROJET coolant spray system - Chip guard (rear wall) - Machine lamp - Machine feet - Bed stop Condition: Very good, from a training facility "Due to its quality and price, this machine is not suitable for private individuals." Available from March 2026.

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW with 4-roller feed, fixed speeds. Speed extensions. Height of worktable: 920 mm. Spindle tilting: -10° + 45°. Max. spindle projection above table: 175 mm. Spindle speeds: 3250/6500-5000/10000 rpm. Max. tool diameter: 250 mm. Weight: approx. 950 kg. Location: Nattheim. Hfjdpow Enw Ijfx Afnsc

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Hfedpfexta Dysx Afnsc Location: Supplier

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed: 40 – 3000 rpm Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Hsdpfow I A Uxox Afnefc Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: good (used), Year of construction: 1990, functionality: fully functional, Control panel at top, electric spindle lift, 30 mm spindle, electric tilting 45°, Hfsdpfeyaq U Djx Afnec 6 speeds, motor power 7 kW, cast iron fence jaws, large table 2500 mm, Haffner 4-roller feed with 8 speeds, dimensions 2500 x 1100 x 1680 mm, weight 1000 kg, good condition Price ex location. Transport available at additional cost!

Condition: good (used), Spindle mount BT 50 Collet chuck holder DIN 6388, diameter 2 - 16 mm Gear ratio 1:6 Max. speed 15,000 rpm Hfedpfx Afowz I Tbonsc Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, functionality: fully functional, spindle diameter: 40 mm, Spindle for thickness planer Hfjdpot Uvz Rjfx Afnoc

Condition: excellent (used), Catalogue number: 7859 ADVANTAGES – 8 spindles – with oscillation – variable spindle spacing (adjustable) – 2 work tables – unpainted – used drilling machine, in very good condition TECHNICAL DATA Drilling spindles: 2x4 pcs Oscillation range left/right: 40mm per side Oscillation speed adjustment on inverter Spindle head adjustment: up/down Each pair of spindles (2 pcs) adjustable: left/right 2 rotation speed options + left/right Max tool diameter: 15mm Table adjustment: up/down Hsdpfeykay Rjx Afnsfc Table dimensions: 700x200mm 4 hydraulic cylinders Motor power: 2x 2kW Oscillation motor: 0.75kW Dimensions (L/W/H): 1800x1350x1300mm Weight: 862kg Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7896 TECHNICAL DATA - Spindle diameter: 30mm - Working height of spindle: 125mm - Interchangeable spindle - Spindle locking - Height and angle adjustment (up/down + angle) - Fence with adjustment - 4 spindle speeds + left/right rotation: 1400/3500/6000/8000 rpm Hjdsykat Repfx Afnefc - Table dimensions: 1000x550mm - Cast iron table - With sliding carriage 1150x350mm - Hold-down clamp - Angle stop - Motor: 4kW - Brake - Extractor port diameter: 2x120mm - Overall (L/W/H): 1320x1550x1200mm - Weight: 400kg ADVANTAGES – Bulgarian-made – With sliding carriage - With tilting spindle – Used milling machine – In very good condition Net price: 12,900 PLN Net price: 3,070 EUR depending on 4.2 EUR exchange rate (Prices may change depending on fluctuations)

Condition: excellent (used), Catalogue number: 7759 TECHNICAL DATA Circular saw: - Max blade diameter: 350mm - Spindle: 30mm - Blade adjustable front/back, up/down, angle - Pneumatic movement of the saw unit front/back - Blade guard - Motor: 2.2kW I and II milling spindles: - Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 150mm - Spindle lock - Pneumatic movement of units front/back - Manual up/down adjustment - Max cutter diameter: 300mm - Motor approx. 7.5kW - Side sliding table – manual traverse - Table dimensions (L/W): 1000x380mm - Angle fence - Pneumatic workpiece clamp - Dimensions (L/W/H): 2600/3200 (for shipping 2200)/1540mm Hjdpfx Aoyi Trkjfnsfc - Weight: 1450kg ADVANTAGES – German manufacture – 3-spindle machine – Not repainted – Very good condition – Used tenoner Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2001, total length: 2,680 mm, total width: 1,200 mm, total height: 2,200 mm, Empty weight: 950 kg Price: On request Table milling machine Hofmann TFS 1200 Serial no. 127-01204 Year of construction 2001 7.8kW, 16amp, 400V 45 degree tilt adjustable. Hedewl I E Eopfx Afnofc Aigner guide Feeder - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 127-01204 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 2680 - Table width [mm]: 450 - Tiltable spindle: - └ Min. tiltability [°]: 0 - └ Max. tiltability [°]: 45 - Feeding device present: Yes - Brand: Masterwood - Type: Euromeo - Number of wheels [pcs]: 4 - Number of speeds: 2 - Guide present: Yes - Brand: Aigner - Min. spindle speed [rpm]: 3000 - Spindle speed control: Incremental - Transport dimensions: 2680mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1989, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) Hfedpfxox Hggwj Afnoc An independent feed is installed at position 1 A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1989, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) A gear set for one speed is installed A gear set for one cycle time is installed Hjdpfxsx Hgkco Afnjfc The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: not inspected (used), Year of construction: 1965, functionality: unexamined, machine/vehicle number: 103/65, total height: 2,750 mm, table width: 500 mm, table length: 400 mm, pressing force: 110 t, For sale: Weingarten mechanical press 110 ton. This press is from Maschinenfabrik Weingarten A-G and was built as a robust industrial press. The machine was originally always a direct drive press. At a later stage, a conversion to a trimming press was started, but this project was never finished. As a result, the press has been out of operation for several years. The basic structure of the press is still in good condition. Specifications (according to nameplate): Brand: Weingarten Type: P125 Press force: max. 110 tons Ram stroke: min. 100 mm – max. 300 mm Year of manufacture/delivery: 24-02-1965 Serial number: 103/65 Condition: used, project not completed. Hfedpfxjybz Sve Afnoc