Used Spindle Router for sale (12,643)

Condition: good (used), Year of construction: 2014, functionality: fully functional, using Stäubli robots Specifications, information, price, images, etc. can be found in the PDF documents attached. Nsdpfxjzuc T Tj Akiown

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 51.10.318.12, functionality: fully functional, operating hours: 300 h, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 315 mm, cutting width (max.): 420 mm, control type: manual, roller diameter: 440 mm, pivoting range: 45 °, actuation type: electric, total height: 1,900 mm, total length: 780 mm, total width: 650 mm, overall weight: 140 kg, table height: 91 mm, year of last overhaul: 2012, saw band speed: 333 mm/s, Equipment: CE marking, documentation/manual, motor brake, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) Nwedpfx Akjz Im Husion - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: good (used), Year of construction: 2010, functionality: fully functional, DMG Gildemeister GMC20, manufactured in 2010 • Siemens 840D Powerline control system • Six spindles plus 6-2 backworking • All front spindles with X, Z, and W axes • Hainbuch SZ9012B2 collet chucks on the front, equipped with Hainbuch collets in sizes 6 mm, 10 mm, 12 mm, 14 mm, 16 mm, 20 mm, and 24 mm; bar feed accessories included • 9012 ETPU special collet chuck installed on the rear. Various sizes from 3 mm to 22 mm included • HP cutting oil supply • Front tool stations with 30-degree taper on all six spindles. 25 holders included • 15 turning tool holders with 12x12 cross-section • 4 round tool holders with 16 mm diameter • Double “X” axis driven tool holder for use in position 5 Nedpfx As Adp H Nskijwn • Single “X” axis driven tool holder for use in position 4 • Single “Z” axis driven tool for use in 6-2 backworking • Iemca SIR 25P bar feeder • Part ejector, collection device, conveyor belt, and collection container • Losma Filtermist • Kraft & Bauer fire extinguisher

Condition: used, Year of construction: 1988, tilting spindle: Ja -5 bis 45° height adjustment: elektrisch tilting adjustment: elektrisch fence adjustment: manuell height indicator: digital tilting indicator: digital fence indicator: Scala spindle diameter: 30 mm speeds: 3000, 4500, 6000, 8000, 10000 motor power: 6 kW motor brake: Ja, automatisch sustion connection: 2 x 120mm Nsdpozq Dc Iofx Akijwn machine length: 1200mm machine wide: 1400mm weight: 1100kg

Year of construction: 2002, condition: excellent (used), The Sedgwick spindle moulder is designed with a backward tilting spindle - 45 degrees with a forward tilting of 5 degrees. Motor Power 4kw 1.1/4" Spindle diameter Spindle length 140mm Ex College Machine - Like New Year 2002 Nsdpfx Akezumtqsiswn

Condition: excellent (used), Year of construction: 2015, Holzkraft T 45 W classic Year of manufacture: 2015 Nwjdpfszzci Uox Akien Table saw with a robust steel-cast iron construction Tilts up to -45° Usable spindle length: 108 mm Max. tool diameter: 190 mm Table dimensions: 1000 x 435 mm Dimensions of aluminum sliding table: 1000 x 270 mm Motor: 4 kW, 400 V 3500/6000/8000/10000 rpm Equipped with a crosscut fence and sliding table Support arm on a swivel arm Aluminum telescope fence with folding stops and eccentric clamping device Otherwise, standard version Includes a 3-roller feed device

Condition: used, machine/vehicle number: 008739, X axis working area: 6000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Nwodez N Swijpfx Akion Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 16 Total number of tool changer positions: 14

Condition: used, Year of construction: 1963, Rigid milling machine Year of manufacture: 1963 Spindle diameter 30 mm Availability: at short notice Nwodpfx Aszk N Iiskien Storage location: Röllbach

Condition: good (used), Year of construction: 2007, Details will be provided via email upon request. The following repairs were carried out on this machine by Index:  New collet chuck  New clamping cylinder  New part removal system  New PCU (presumably referring to a Programmable Control Unit)  New display screen Nwjdpfx Aj Af Uzzokion  New synchronization spindle

Condition: good (used), Year of construction: 1989, machine/vehicle number: 18052, functionality: fully functional, pressing force: 3 t, stroke length: 500 mm, distance table to ram: 500 mm, total length: 700 mm, total width: 300 mm, total height: 780 mm, overall weight: 185 kg, Dornpresse Ageo DP3000R in good, fully functional condition. Technical specifications can be found in the last image. Nodpfxoz Hlplj Akijwn

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller model: Siemens, workpiece weight (max.): 100 kg, total height: 3,030 mm, total length: 5,400 mm, total width: 6,265 mm, overall weight: 24,000 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 32,000 W, number of spindles: 2, number of slots in tool magazine: 100, Equipment: CE marking, chip conveyor, documentation/manual, type plate available, SAMAG MFZ 4-2W CNC twin-spindle machining center For sale: SAMAG MFZ 4-2W CNC machining center, currently in working order and available for inspection at our facility. The machine is ideal for high-productivity machining thanks to its twin-spindle configuration and has been maintained in good working condition. >Included in the supply: Spare electro-spindles Spare B-axis motors Spare W-axis motors Spare A1/A2 motors Machine documentation available (mechanical and electrical) Nwedpfoz Nlzzex Akien >Main features: CNC twin-spindle machining center Year of manufacture: 2014 Machine in working order Inspection and testing possible on-site by appointment The inclusion of spare parts represents a significant added value, allowing for reduced time and costs for any future maintenance work. The system includes a chip extraction system for cast iron components from Knoll, complete with a filter mat for managing the emulsion for coated parts. Spindle mount: HSK-80 The 3D (step) model of the machine is also available for use with simulators. IMPORTANT: The machine will be sold without tooling, as it is specific to the components being produced! For further information, photographs, videos of the machine in operation, or to arrange a visit, please contact the seller directly.

Condition: excellent (used), Year of construction: 2007, operating hours: 60,000 h, functionality: fully functional, travel distance X-axis: 240 mm, travel distance Z-axis: 450 mm, chuck outer diameter: 381 mm, spindle speed (min.): 2,500 rpm, turning diameter: 580 mm, total length: 2,900 mm, total height: 2,770 mm, total width: 2,700 mm, turning length: 450 mm, turning height: 450 mm, overall weight: 13,000 kg, Equipment: documentation/manual, Used DOOSAN Mecatec V450TM twin-spindle CNC vertical turning centre, fitted with FANUC Series 18i-TB CNC control. The machine has been modified with two SAUTER VDI50 tool turrets, each offering 12 tool stations and driven-tool capability (24 tool positions in total). C-axis. Turret arrangement supports combined turning, drilling and milling operations. Nwodpfsz Sx Nkox Akien

Condition: good (used), Year of construction: 1996, functionality: fully functional, For sale is a used SAMCO T 40 I table milling machine / swivel spindle milling machine, manufactured in 1996. This compact and robust milling machine features a spindle that can be swiveled up to 45°, multiple speed settings, and clockwise/counter-clockwise rotation. The spindle adjustment is conveniently done using the side handwheel. Technical specifications: Manufacturer: SAMCO / SCM Type: T 40 I Year of manufacture: 1996 Machine number: KK/032907 Voltage: 380 V / 50 Hz Motor power: 3 kW / 4 HP Speeds: 3,500 / 6,000 / 8,000 rpm Nsdpfx Aezxx Egjkijwn Spindle length: approx. 125 mm Max. tool diameter: approx. 180 mm Swiveling milling spindle: up to 45° Clockwise/counter-clockwise rotation Motor brake Manual spindle height adjustment Milling fence with dust extraction option Weight: approx. 175 kg Used, well-maintained condition considering its age. The machine is compactly built and is well-suited for carpentry shops, joineries, and smaller woodworking businesses. Transportation is possible for an additional charge! The machine is currently still at the customer's location but would be immediately available! The machine will be inspected before sale. In the case of a sale to commercial customers, the warranty will be excluded due to the year of manufacture. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 1992, Table milling machine, Panhans Type 250, from a training workshop. - Dovetail and slot table - Aigner integral fence - Elu feed system - Power: 5.5 kW - Speeds: 3000/4500/6000/9000 rpm - Clockwise/counterclockwise operation - Spindle: 30 mm #8503 Nwodpfeztwr Isx Akien Net price

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: AB00022616, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 901 kg, SCM Class TI 145ep shaper in CE version, manufactured in 2022. Equipped with the READY 3 UP system, featuring a shaper fence with mechanical programming, a FAST sectional table with manual adjustment, and a support for the feeder with manual vertical and horizontal movements. Interchangeable shaper arbor with MK 5 coupling, tool holder cone MK 5 with adapter and clamp (right), and a T-SET rapid tool clamping system. LL version with 2 cast iron table extensions for profiling. Nwjdez Nggrspfx Akien

Condition: refurbished (used), Year of construction: 1998, workpiece weight (max.): 15,000 kg, travel distance Z-axis: 1,000 mm, chuck outer diameter: 1,750 mm, spindle speed (max.): 400 rpm, turning diameter: 2,100 mm, turning height: 1,350 mm, rotational speed (max.): 3,000 rpm, feed force Z-axis: 50,000 N, year of last overhaul: 2026, The Millennium provides very high precision turning and versatile machining capability. Always precise, always powerful. Features of this machine:- – Involute chain drive for very high speeds, very low noise – a 36” diameter Timken cross roller bearing, the ultimate bearing – see last page – All steel 1750mm dia. 4 jaw chuck for high speeds. Maximum loading 15,000kgs. – A servo powered C axis control that provides backlash free C axis movement – high power and high accuracy – 200mm square forged steel ram - high accuracy heavy cutting when required and incorporating a 15KW ISO 50taper live spindle providing speeds 20 to 3000rpm for rotary contour milling, pcd drilling and angle milling and grinding with attachments (new heads can be provided to order). 1350mm maximum height under ram – Automatic pick up of turning tools, live tools and attachments from the 18 pocket tool magazine – Raise and lower crossrail - high precision latching and clamping at 200mm pitches – flexibility without loss of accuracy Fanuc 18Ti. A very precise, powerful and versatile machine tool. Performs all functions shown in photo gallery Nwsdpsy Uwxtofx Akion 12 months guarantee

Condition: used, Year of construction: 1981, Used Machine Year of manufacture: 1981 Features and Technical Specifications: - With 2-stage pneumatic lifting spindle - Mandrel diameter: 40 mm - With long table length: 2500 mm Nwodpfjzk N Dqsx Akion - With extendable frame support - With milling stop featuring Panhans metal stop jaws and fine adjustment - Machine must be inspected/overhauled. Basic functions are intact Availability: Immediately Location: Röllbach

Condition: excellent (used), Year of construction: 2000, Robust oscillating milling machine T 26, swiveling from -45 to +45 degrees. Reversible drive motor 5/6kW with automatic motor brake. R/L rotation. Swiveling angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the swiveling angle is displayed in the upper display, which can then be set on the stop, allowing settings to be implemented according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for overall adjustment and infeed stop separately, as well as input of the cutter diameter; the cutting depth is automatically calculated. Stop with lifting device, can be swiveled away (for curved milling work). Table extension to the right and left with retractable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Nsdpfxozbm Tfe Akijwn Foldable stop for plunge milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron table tops, left 500mm, right 500mm, with two insert guide rails. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed connection, switchable from the control panel. Comfort stand with electrically height-adjustable feed support, which can be swiveled away for machine maintenance and then easily locked into place. Dust extraction port 2 x 120mm. Compressed air connection 6bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belt renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: used, Spindle 3.5 - 16 - 10 kVA 2750 - 14660 - 23660 RPM Nsdpfep I T Rqjx Akiswn Inspection is possible at my warehouse after prior appointment. Collection or shipping are both possible.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Good morning, Nsdpjz R R Ttsfx Akiown I am offering for sale a Felder F900Z Z vertical milling machine. The machine is in VERY GOOD condition – it has been used less than it has been idle. It is a solid machine, ideal for precise woodworking. Its condition is visible in the photos, and it is ready for use – with no hidden defects. Please contact me via WhatsApp: 783-547-702.

Condition: used, Year of construction: 1980, machine/vehicle number: 18.742, Table milling machine with fixed milling spindle Table size 1,920 x 900 mm, Motor 6/8 kW (8/11 HP), Nedpsul Sfmefx Akijwn 4 speeds 3,000/6,000/4,500/9,000 rpm, Milling arbor D = 30 mm with Morse taper MK 5, Weight approx. 700 kg, Location: Seevetal, Sold "as is", as inspected, Ex works, excluding transport, subject to prior sale.

Condition: used, machine/vehicle number: 184099601, Turning length: max. approx. 1000 mm, center height: approx. 250 mm, with coolant system, machine light, 4-jaw chuck, diameter: approx. 250 mm, hollow spindle diameter: 60 mm. Nsdpfxe Af Nkls Akiewn

Condition: used, total width: 900 mm, total length: 2,050 mm, total height: 2,100 mm, Year of manufacture: 1956 Colour: Green Empty weight: 2.400 kg - Year: 1956 - Serial number: 3706 - Drive system: Conventional - Drive system: Gear drive - Number of drills [pcs]: 4 - Power [kW]: 6 - Table type: Fixed table - Table length [mm]: 1800 - Table width [mm]: 350 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 25 - Reach [mm]: 275 - Main spindle power [kW]: 6.0 - Min. spindle speed [rpm]: 180 - Max. spindle speed [rpm]: 2000 - Options: Tapping function - Transport dimensions: 2050mm x 900mm x 2100mm (l x w x h) - Transport weight [kg]: 2400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Njdpfsz R Dt Eox Akiswn Lukas van Rossum

Condition: used, Year of construction: 2006, functionality: fully functional, Equipment: rotational speed infinitely variable, Manufacturer: 600 Lathes Model: Harrison V350 Centre Height: 170 mm Swing over Bed: 350 mm Swing over Cross Slide: 196 mm Swing in Gap: 535 mm Width in front of Face Plate: 165 mm Distance between Centres: 650 mm Spindle Speeds (stepless via potentiometer across 3 ranges, with digital readout): 15 - 340 rpm 45 - 1010 rpm 150 - 3250 rpm Spindle Mount (Camlock): D1-4 Spindle Bore: 54 mm Nwedpfxexcuule Akijn Spindle Motor: 7.5 kW Carriage Guideway Width: 318 mm Cross Slide Travel: 250 mm Top Slide Travel: 140 mm Tailstock Quill Travel: 140 mm Tailstock Quill Taper: MT4 Quill Diameter: 63 mm Metric Version Machine Threads: Metric: 0.2 - 14 mm (51) Imperial TPI: 2 - 56 (56) Module: 0.2 - 3.5 (20) Diametral Pitch: 8 - 56 (20) Drive Power: 7.5 kW Equipment: 3-Axis Digital Readout 3-jaw Chuck Röhm D:200 mm 4-jaw Chuck D:160 mm Collet Chuck System Steady Rest 4-position Quick Change Toolpost Live Centre Chuck Guard Additional Chip Shield on Carriage Coolant System Rear Splash Guard Machine Documentation incl. Schematics Dimensions: Floor to Spindle Centre: 1050 mm Overall Length: 1900 mm Overall Width: 1100 mm Overall Height: 1300 mm Weight: 1350 kg The machine can be demonstrated under power on site by arrangement. All details without guarantee. Errors and prior sale reserved.

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,600 kg, pressure: 7 bar, Masterwood Speedy TF 2.0 Machine in very good condition Maximum working width: 1000 mm Maximum working length: unlimited Fully equipped Drilling head Nodpfx Aez A Trajkijwn Saw blade Tool changer Router ISO30 Masterwork CAD-CAM system Tables with adjustable inclination, front and rear Available from the end of November 2026 Price upon request