Used Spindle Moulding Machines for sale (66,476)

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 43, turning diameter over cross slide: 32 mm, number of spindles: 6, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Swing diameter over cross slide: 32 mm Max. spindle speed: 3,150 rpm Number of spindles: 6 Round bar capacity: 32 mm Square bar capacity: 22 mm Hexagonal bar capacity: 27 mm Max. bar feed: 125 mm Max. travel long slide: 100 mm Maximum number of parts: 35 Bjdpfxsyybcaj Acvjda Machining speed: from 1.12 s to 125 s Spindle speeds: from 200 rpm to 3,150 rpm Number (steps): 49 Machining time: from 0.63 s to 200 s MACHINE DETAILS Voltage: 50 Hz, 3x 380 V Power: 18.5 kW Dimensions & Weight Dimensions (L x W x H): 3,850 x 1,390 x 2,200 mm Weight: approx. 8,000 kg EQUIPMENT Knoll AE 1114 high-pressure system Filtration system 5-bar and 40-bar pumps individually adjustable for processing stages Plate heat exchanger Lifting pump for chip conveyor

Condition: used, Year of construction: 2007, Patented tie-bar-less clamping system, screw diameter 70 mm. Fully operational. We are winding down our production. Bedpfxjyw Hyxs Acveda

Condition: used, Year of construction: 2010, operating hours: 60,000 h, Patented tie-bar-less clamping system. Screw diameter 55 mm. We are closing down our production; we have two of these machines available, both in full working condition. Bjdpfx Aoyw Hwqjcvsda

Condition: used, Year of construction: 2010, operating hours: 65,000 h, Patented tie-bar-less clamping system, fully hydraulic, with high rigidity. Screw diameter 22 mm. We are winding down our production. We have two of these machines. Both are fully operational. Bodpfxeyw Ht Sj Acvoda

Condition: used, Year of construction: 2008, functionality: fully functional, HAAS VF-4SS Machining Center, 4th Axis – !!!! SPINDLE NEW !!!!! Year of manufacture: 11/2008, Commissioned 03/2009 Description: Bdjdpfoytpqksx Acvja X-axis travel: 1270 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Distance spindle nose to table max.: 742 mm Spindle power: 22.4 kW Max. spindle speed: 12,000 rpm Max. spindle torque: 122.0 Nm at 2,000 rpm Drive system: Direct drive, inline Spindle taper: SK40 Table size (L x W): 1321 x 457 mm T-slot width: 16 mm Number of standard T-slots: 5 Feed rates: - Max. cutting feed: 21.2 m/min - Rapid traverse: 35.6 m/min Tool changer capacity: 40 stations Max. tool weight: 5.4 kg Tool-to-tool change (avg.): 1.80 s Chip-to-chip change (avg.): 2.40 s Coolant capacity: 208 L Machine weight: 6,033 kg Accessories/Options: - 4th axis rotary table, HAAS HRT210 - Spiral chip conveyor - Coolant tank 200L - Through-spindle coolant (TSC 20 BAR) - 2-stage 25µ filter system - 40+1 position tool magazine - Programmable spindle orientation - 16MB program memory - 8M functions - 4th axis interface - Manual tailstock HTS6 Machine is powered and currently in production.

Condition: good (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 280 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,065 bar, total length: 3,200 mm, total width: 1,350 mm, total height: 1,850 mm, overall weight: 2,900 kg, Equipment: documentation/manual, warehouse no.: 503562 manufacturer: ENGEL type: Victory 200-28 Tech controller: CC200 year of construction: 2011 clamping force: 280 kN size of mould plates h x v: 500 x 400 mm min. mould height: 150 mm max. open daylight: 550 mm Bdedpfxjykpvbo Acvja opening stroke: 400 mm screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor LxW: 2800mm x 350mm Discharge height: 950mm Speed: 9m/min machine incl. Handling machine incl. water flow regulator Anti vibration mounts interface for ejector plates safety interface for temperature control units Schuko-socket 10A selection unit measures of machine l x w x h: 4.4m x 1.9m x 2.1m total weight: 2900KG technical data robot-system handling type: Linear manufacture: ENGEL controller: Viper 6 year of construction: 2011 electric cabinet dimensions: 1,00m x 0,35m x 0,64m

Condition: excellent (used), Year of construction: 2012, operating hours: 49,130 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 42 mm, displacement volume: 214 cm³, injection pressure: 1,724 bar, ejector force: 20,400 N, ejector stroke: 130 mm, plate length: 610 mm, plate width: 635 mm, total length: 4,370 mm, total width: 1,210 mm, total height: 2,200 mm, overall weight: 3,730 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 725 mm, Equipment: documentation/manual, warehouse no.: 503452 manufacturer: BOY type: 90 E controller: Procan ALPHA year of construction: 2012 operation hours: 49130 h clamping force: 900 kN distance between tie-bars h x v: 430 x 360 mm size of mould plates h x v: 635 x 610 mm min. mould height: 250 mm max. open daylight: 725 mm opening stroke: 475 mm screw diameter: 42 mm swept volume: 214.7 ccm injection pressure: 1724 bar screw length: 20 l/d Bdodpfx Aoyknr Iocvea screw stroke: 155 mm screw speed: 280 min screw torque: 700 N plasticising rate: 136 g/s PS number of heating zones: 4 nozzle stroke: 250 mm equipment included screen text german core pulling hydraulically 1x machine without material hopper machine without water flow regulator Anti vibration mounts interface EUROMAP 67 interface USB measures of machine l x w x h: 4.37m x 1.21m x 2.2m total weight: 3730KG

Condition: good (used), Four-side planer SCM SINTEX – very well-maintained machine from a small joinery Bdedpfxjyuw Rnj Acvoa Weight: 925 kg Dimensions (L x W x H): 340 x 100 x 160 cm 380V 4 spindles Bottom/top spindle 7.5 kW Left/right spindle 7.5 kW Max. working height 105 mm Max. working width 180 mm Infeed table 2300 mm Spindle diameter 40 mm

Year of construction: 2006, condition: ready for operation (used), Four Engel injection molding machines are available. 1) Engel ES 750/150 HL, year of manufacture: 2006, core pulls: 2, screw diameter: 55mm, shot volume: 511cm³, injection pressure: 1616bar/2052bar, nozzle stroke: 350mm, nozzle contact force: 67kN, clamping force: 1500kN, opening stroke: 606mm, ejector force: 60kN, ejector stroke: 150mm, min. mold installation height: 294mm, platen dimensions X/Y: 750mm/520mm, weight: approx. 9500kg, control system: CC100, operating hours: approx. 79000h. Including Engel HLi automation robot. 2) Engel ES 80/30 HL, year of manufacture: 1995, core pulls: 2, screw diameter: 22mm, shot volume: 38cm³, injection pressure: 1500bar/2050bar, nozzle stroke: 200mm, nozzle contact force: 28kN, clamping force: 300kN, opening stroke: 330mm, ejector force: 24kN, ejector stroke: 70mm, min. mold installation height: 110mm, platen dimensions X/Y: 550mm/380mm, weight: approx. 2500kg, control system: CC100, operating hours: approx. 113300h. 3) Engel ES 2000/250, year of manufacture: 1993, core pulls: 3, injection unit: PVC, screw diameter: 70mm, shot volume: 1154cm³, injection pressure: 1400bar/1700bar, nozzle stroke: 450mm, nozzle contact force: 150kN, clamping force: 2500kN, opening stroke: 600mm, ejector force: 70kN, ejector stroke: 200mm, min. mold installation height: 200mm, platen dimensions X/Y: 910mm/910mm, weight: approx. 16000kg, control system: CC90, operating hours: approx. 109300h. Including Wittmann W322 automation robot. 4) Engel ES 750/150 HL, year of manufacture: 1998, core pulls: 2, screw diameter: 35mm, shot volume: 135cm³, injection pressure: 1060bar/1600bar, nozzle stroke: 200mm, nozzle contact force: 28kN, clamping force: 600kN, opening stroke: 450mm, ejector force: 40kN, ejector stroke: 100mm, min. mold installation height: 150mm, platen dimensions X/Y: 600mm/560mm, weight: approx. 4700kg, control system: CC100, operating hours: approx. 108600h. Including Engel sprue picker automation robot. Documentation available. An inspection on site is possible. Bdjdpfoyu T D Dsx Acvoa

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Hersteller: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Bdjdpfexhfuasx Acvsa Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Bdsdpfegrzh Ejx Acvsa Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: good (used), Year of construction: 2007, Ref. no.: 18588 Hersteller: BATTENFELD Type: EM 30/55 Unilog B6 Run hours: 3.200 Electric machines Bsdpfxexdk Aue Acvsda Year of construction: 2007 Clamping unit Clamping force: 30 ton Distance between tie bars: 300 x 300 mm Mould height min.: 150 mm Mould height max.: 330 mm Opening width: 580 mm Platen size (h x v): 450 x 450 mm Injection unit Screw diameter: 18 mm Injection volume: 19 cm³ Shot weight: 17,5 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 x 1,1 x 1,9 m Machine weight: 2700 kg

Condition: good (used), Year of construction: 2011, Ref. no.: 18586 Hersteller: KRAUSS MAFFEI Type: KM180-750 AX Electric machines Year of construction: 2011 Clamping unit Clamping force: 180 ton Bdsdpjw E E Evsfx Acvsa Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Bdsdjym Nbvepfx Acvja Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: used, Multi-speed machine with flexible shaft BIAX type MB 4-2 Machine no. No. 9/50/55 Year of construction approx. 1970 Length of the flexible shaft: 2 meters Speed: 900 - 9000 rpm infinitely variable Motor speed: 3000 rpm Motor power: 1.2 kW = 1.5 HP Mains connection: 380 Volt, 50 Hz - Handle straight grinder with collet Ø 6 mm - Swivel and rotatable base - Transport trolley with 2 drawers Overall dimensions: 850 x 550 x 1100 Weight: approx. 80 kg Bdedjfim Tispfx Acvsa good condition Universal for milling, grinding and polishing work

Condition: used, Stretch blow molding machine from Etek ISBM Line = Injection Stretch Blow Molding Stretch blow molding machine for single-use PET bottles from PET preform blanks Stretch blow molding machine for rotary index production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Bdedpfxjkucxls Acvsa Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As new condition

Condition: as good as new (ex-display), Year of construction: 2023, Spindle tiltable: Yes -45 to 45° Height adjustment: electric Pivot adjustment: electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop indicator: mechanical counter spindle diameter: 30 mm spindle speeds: 3000, 4500, 6000, 8000, 10000 rpm power input: 7 kW Bdodogr Ufpopfx Acvea Motor brake: Yes, automatic Suction connection: 1 x 120mm, 2 x 80mm Machine length: 2500mm Machine width: 1250mm Weight: 510kg

Condition: as good as new (ex-display), Year of construction: 2025, Spindle tilting: Yes, 0 to 45° Height adjustment: Electric / Position control Swivel adjustment: Electric / Position control Milling stop adjustment: Electric / Position control Milling jaw adjustment: Manual / Handwheel Height display: Digital display Swivel angle display: Digital display Milling stop display: Mechanical counter Aigner integral stop: Yes Milling spindle diameter: 30 mm Bdedpfx Acjwhuvcsvsa Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 2599 mm Machine depth: 900 mm Weight: 655 kg

Condition: as good as new (ex-display), Year of construction: 2026, Swivel spindle: Yes 0 to 45° Height adjustment: handwheel / electric Swivel adjustment: Handwheel / electric Milling jaw adjustment: manual Height display: Digital display Swivel angle display: Digital display Milling stop indicator: mech counter Bdsdpfjuzkxxex Acvsa Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg

Condition: as good as new (ex-display), Year of construction: 2018, Spindle tiltable: Yes -45 to 45° Height adjustment: Handwheel Pivot adjustment: Handwheel Stop adjustment: manual Height display: mech. counter display Swivel angle display: mech. counter display Milling stop display: mechanical counter display spindle diameter: 30 mm spindle speeds: 3000, 4500, 6000, 8000, 10000 rpm power input: 7 kW Motor brake: Yes, automatic Suction connection: 1 x 120mm, 2 x 80mm Machine length: 2500mm Bodegyzzmjpfx Acvsda Machine width: 1250mm Weight: 510kg

Condition: good (used), Code: 0405 Brand: VITAP - ITALY Model: ALFA 21 Multiple boring machine for furniture, kitchens, custom furniture, bathroom furniture and various Technical data: Bedpfx Aoyrrhiocveda N° 21 spindles - Centre distance mm 32 Max drilling depth mm 80 Table dimensions mm 860 x 500 Spindle rpm 2800 Motor power Hp 2,5 Tilting head 0-90° Operating pressure 6-8 atm Overall dimensions mm 950 x 800 x 1140 h Weight kg 300

Condition: good (used), Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Bdedpfxsyrgcbo Acvea Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700

Year of construction: 2001, condition: excellent (used), machine/vehicle number: PB 04 02.01/1070, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Bedpfx Acjidqtlovoda

Condition: excellent (used), machine/vehicle number: 70218, Equipment / Additional information: Bjdpfxspithao Acveda Various tools Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: excellent (used), machine/vehicle number: 85039, Model: 371 Bdodpfoth U E Eox Acvsa Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm