Used Software for sale (2,594)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT Kdedpfsw Hxuaex Aacou 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: new, Year of construction: 2023, functionality: fully functional, cutting width (max.): 600 mm, cutting length (max.): 1,300 mm, stack height: 1,300 mm, Equipment: documentation/manual, The P60 is a small format Hot Wire Cutter designed to cut EPS and XPS polystyrene sheets while keeping the footprint of the machine to a minimum. Kedpfx Aaoup Epaecjdu The P60 is suited for Sign Makers and businesses who manufacture 3D products including Decorative Facias, Letters and Logos. Key Features - 2-axis CNC Contour cutting system. - 600mm Working Width. - Available in 3 modular sizes up to a maximum cutting length of 3050mm. - Supports High Strength Titanium wire available from 0.15mm in diameter. - IXshaper Windows software to operate the machine and prepare cutting files. - Auto-stop and resume feature during a wire break. Additional Options - Turntable – Rotating plate used for making 3D products. - Lathe – Horizontal rotation feature used to make round objects such as columns and balusters. - Shapewire Bar – Uses a 1mm diameter wire which can be shaped to any custom design. - Handheld Controller to provide machine status and position. P60 Technical Data Processable Materials: EPS Polystyrene, XPS Polystyrene Software: iXshaper – Lifetime Updates Compatible File Formats: DXF, HPGL/PLT, RAW 3D, PS/AI Maximum Move Speed: 47 mm/Sec Available Wire Diameters (mm): 0.15, 0.25, 0.30, 0.35, 0.45, 0.55, 0.6 Power Requirement: 230v, 50hz Windows Compatibility: XP, Vista, 7, 8, 10, 11 PC and Monitor: Optional Warranty: 5 Years - Excluding Consumables

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Specifications • Working Area: 2500 mm × 1800 mm Kdedpswm Nu Dofx Aacsu • Laser Source: CO₂ laser, with available power options ranging from 60 to 600 watts, utilizing sealed-off laser technology for consistent performance • Mechanical Tools: Supports a variety of tools, including routers, oscillating knives, drag knives, kiss-cut knives, and creasing wheels • Control System: Equipped with Zünd's ZCC V3 software, facilitating precise control over cutting operations • Additional Features: o Optical registration camera for enhanced precision o Integrated conveyor system for efficient material handling o Modular design allowing up to three tools to operate in parallel

Condition: new, Year of construction: 2025, Number of placement heads: 4 Number of feeders: 50 Minimum component size / smallest printable component: 0201 (inch) components Maximum component size: ~40 × 40 mm Minimum pin pitch: ≥ 0.3 mm Maximum PCB size: Standard: 400 × 200 mm; Optional: 400 × 290 mm Z-axis travel range: 20 mm zjyingxing.com Maximum placement speed (peak): ~9,500 pcs/hour Average placement speed: ~8,000 pcs/hour Placement accuracy: 0.01 mm Nozzle buffer range: ~4.5 mm Drive / motor: Servo motor (Panasonic) + ball screw & linear guide rails (TBI linear guide) Cameras / vision system: One “mark” camera, four high-speed cameras, plus one high-definition camera Power supply: 220 V / 110 V, 50 Hz; average power consumption approx. 400 W Air requirements: Compressed air: 0.6-0.7 MPa Air pump capacity: Minimum 80-120 L/min, pump volume ≥ 60 L Number of trays (components outside feeders): Supports up to approx. 48 trays for non-feeder parts, each with coordinates within the placement area Kodjxnlmiopfx Aacedu PCB handling: Automatic 'left-in, right-out'; supports left-right connection of devices (infeed/outfeed) Machine dimensions: ~900 × 1140 × 900 mm (L × W × H) Weight: ~250 kg Software / interface: English; free software updates; user interface with display

Condition: ready for operation (used), - invoersysteem voor plat- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Hydraulische schaar voor vlak staal VPS 2200 cap: 220 ton maximale lengte: 15 200 mm breedte/dikte: 500/25 mm hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 Kdodswlkw Djpfx Aaceu cap: 240 ton maximale lengte: 15 200 mm 200 x 200 mm / 16 mm Hydraulisch ponsen VPO 1000 cap: 100 ton ponsdiameter/dikte: 57/15 mm of 32/25 mm 4 ponsunits voor vlak staal (Verticale positie) 1 ponseenheid voor hoekstaal (horizontale positie) incl. gereedschap Hydraulische teller VNI 1/36 1 codeerschijf 36 tekens tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 37 kW - 250 bar

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Kodpfovvi I Rex Aacjdu

Condition: excellent (used), 5-Axis Machining Center HOLZ-HER ProMaster 7125 -used- Console machine, pneumatic workpiece stops with double-acting cylinders, pneumatic loading aids, hardened, dust-protected prism guides, helical rack and pinion drive (X-axis), ball screw drives on Y and Z axes, network card for remote maintenance, electrical cabinet cooling with heat exchanger, manual control device, C-axis, A-axis, saw unit for grooving in the X direction, Kjdpoxlqkhofx Aacodu revolving disc tool changer, including safety fence, including tread mats, pendulum operation possible, laser for suction cup positioning, automatic central lubrication, uninterruptible power supply ----- Technical Data ----- Processing length (routing R) X: 3,385L / 3,605L mm, Processing length (routing R) Y: 1,335 mm, min. workpiece thickness: 215 mm, control software: CAMPUS HOPS 7, main spindle motor power: 12 kW (S6), main spindle speed: 1,000 - 24,000 rpm, main spindle interface: HSK-F63, spindle cooling: liquid cooling, drilling unit motor power: 3 kW, drill spindle interface: M10, locating fit 11mm, number of vertical drill spindles: 10 pcs, number of horizontal double drill spindles in X direction: 2 pcs, number of horizontal double drill spindles in Y direction: 1 pc, saw blade diameter of saw unit: 125 x 20 mm, number of consoles: 6 pcs, number of tool changer positions: 18 pcs, vacuum pump capacity: 140 m³/h, extraction port diameter: 250 mm, required volume flow: 6,100 m³/h, required static pressure: 1,300 Pa, required air velocity: 35 m/s, compressed air connection: 6-8 bar, compressed air consumption: 300 Nl/min, weight: 4,600 kg, year of manufacture: 2019 Quality Information: - complete basic cleaning - electrics checked - pneumatics checked - set as per manufacturer's specifications - immediately ready for operation

Condition: new, functionality: fully functional, Year of construction: 2025, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity, while offering the lowest total cost of ownership. The high-quality components used in this machine, as well as the latest version of the BENDtronic® control system, which is installed as standard on all EVO machines, are particular highlights. HAEUSLER EVO 21015 4-Roll Bending Machine / Roll Bending Machine Manufacturer: Haeusler Type: EVO 21015 4-Roll Bending Machine / Roll Bending Machine Origin: Germany / Switzerland Condition: NEW, Display Machine Availability: 12-14 weeks Capacity: Working width 2100 mm Rolling capacity 12 mm Pre-bending capacity 9 mm Standard Equipment: • Variable swing arm adjustment of the side rollers VSA® • HAEUSLER Hybrid Drive System HHDS® • Movable 21.5" touchscreen control panel including high-end BENDtronic® control • Continuously adjustable rotation speed between 0 and 8 m/min • Machine prepared for remote maintenance • Electromechanical holding system for the rotation of the upper roller • Automatic pressure adjustment of the lower roller • Automatic pressure compensation of the Bottom roll cylinders: Standard cooling system for ambient temperatures up to 35°C • Automated axis optimization • Automatic hydraulic shutdown for roll positioning • Ultra-compact design to reduce or even eliminate foundation costs • Safety ripcord Optional equipment: • Two-roll drive for the top and bottom rolls • Cone bending device for bending conical workpieces • Advanced cooling system for ambient temperatures up to 45°C • Top support for easier bending of large diameters • Side support for assisting with bending of large diameters • Gas pressure accumulator for calibrating previously welded cylinders • BendIT-Office workstation software • Autonomous bending • Machine prepared for quick top roll changes • Interchangeable top rolls with different diameters for bending small-diameter sections • Hardened rolls for bending black and stainless material • Infeed roller conveyor for easy sheet feeding into the machine • Centering device for the infeed roller conveyor, for automatic centering of sheets before bending Not the right machine? Kdjdpfx Aaoxnnf Isceu As a Haeusler representative, we can customize and offer you the machine you need. Don't hesitate to contact us.

Year of construction: 1998, condition: used, temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available Kdjdpfou Rwausx Aacju - Machine is CE98 certified On sale as is.

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 1438016140010, Checkweigher Mettler Toledo / Garvens Model C3570 Year built: 2020 Weighing capacity: 360–1400g Calibration still valid Kodpoxnmy Refx Aacodu Software included

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: AC, input voltage: 230 V, Measuring range D50mm / L500mm, see template Software version ProMeasure 2.46.4 SCSI electronics Scan50+ Kdjdpowzrt Eefx Aacju PC Dell EX2, i5, operating system Win 10 32Bit, 4GB RAM Condition very good, with minor signs of use Keyboard + mouse new Monitor 23 inch

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Storage location: Nattheim Ksdevvi Nbjpfx Aacjdu

Year of construction: 2020, condition: new, A new Cassel Ferrous In Foil Metal Detector with an aperture of 350mm x 200mm - this unit was purchased new and never used - Metal Detector for industrial foreign body detection - Metal Shark 2A BD - complete with instruction manual in English - ready to ship worldwide from our warehouse. Kdodpfjt Dkrcox Aacou This is a digital metal detector for conveyor applications - housing in stainless steel - Digital control box attached to sensor and IP rated IP54 Ethernet Module enables software connection (auto reporting and remote maintenance) Estimated Sensitivity based on the aperture size is Fe 3.5 - 4.5mm Comments - Sensitivity performance of Ferrous in Foil MD type depends on product speed - The faster the product through the aperture the stronger a metal amplitude becomes. Recommended belt speed minimum is 500mm/sec. Ask for video of system operating

Condition: used, Year of construction: 2008, functionality: fully functional, MEASURING ARM FARO FUSION Year of manufacture: 2008 Measuring range: 2400 mm Software: Polyworks (please download the current version from the Polyworks website, ours is for Win XP) Dongle for the software is present and included Accessories: measuring spheres, tools, spare battery, cables, charger, and original transport case Last calibration: 2020 REV 26.8 Single point: 0.0510 mm Volumetric: 0.710 mm Further details can be found in the pictures Kedpfx Aasxmrymscjdu

Condition: used, Technical details: Kedpfxou N Auhj Aacjdu space requirements of the machine approx.: 2x Boxen: 0,85x0,55x0,40 / 0,10x0,55x0,4 m Aramis 3D Camera = robust design for high-end applications with high-resolution 3D sensor. Camera resolution 1936 x 1216 pixel Frame rate (fps) 130 fps at full resolution; 24 fps at 1/2 image height; 450 fps at 1/4 image height: Aramis Adjustable = modular and flexible measurement system for research and industry with user-friendly application. without software (only via manufacturer ) *

Year of construction: 2003, condition: excellent (used), Schneeberger DMR Gemini CNC tool grinding machine TECHNICAL DATA Control: GE Fanuc 160, 5 axes simultaneous Software: Schneeberger Quinto Measuring system X,Y and Z axis: 0.1 μm A-axis: 0.0001° C axis: 0.0001° Grinding head Power: 15 kW speed: 50 - 10`000 rpm spindle nose: HSK 50 Max. wheel diameter: 250 mm Max. Number of grinding wheels: 6 Linear axes X-axis, travel: 380 mm feed speed: 20`000 mm/min resolution: 0,0001 mm gear ratio: 1 : 1 Power: 1,0 kW / 3 Nm Y-axis, travel: 300 mm feed speed: 5`000 mm/min resolution: 0,0001 mm Gear ratio: 24 :4 Power: 1,6 kW / 8 Nm Z-axis, travel: 280 mm feed speed: 20`000 mm/min resolution: 0,0001 mm gear ratio: 1 : 1 Power: 1,0 kW / 3 Nm Rotary axes C-axis: 210 ° Speed: 72 ° / s Resolution: 0,0001 ° Power: 1.6 kW / 8 Nm C` axis: +- 180 ° Speed: 90 ° / s Resolution: 0,0001 ° Infeed: Hydraulic A axis: +- 360 ° Speed: 225 ° / s resolution: 0,0001° Power: 1,0 kW Nose: ISO 50 Center height: 210 mm Dimensions and weight Length: 1700 mm Depth: 2270 mm Height: 2260 mm Weight: 8`000 kg Kjdpfomqni Aox Aacjdu We do not guarantee the accuracy, completeness and timeliness of the information.

Condition: excellent (used), Year of construction: 2015, operating hours: 64 h, machine/vehicle number: LS001216, Size 53 x 75 cm, Prinect Press Center, Axis control, Instantgate software, Intellistart, Colorfast, Preset Plus feeder, ultrasonic double sheet control, Autoplate, Alcolor Vario dampening, Heidelberg combistar air-cooled cooling and recirculation unit, Heidelberg Hydrostar air-cooled, Powderstar AP 262 powder spray, Staticstar compact anti-static device, Preset Plus delivery, blanket wash, roller wash, impression cylinder wash. 15,000 sheets/hour. Ksdpfxexd Ahie Aacjdu

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Kedpfx Aaevvkipscjdu

Condition: used, Year of construction: 2003, Power: 5 kW (7 HP) Height: 164 cm Voltage: 400 Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Year: 2003 Type : Laboratory and pilot freeze-dryer Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, 3 + 1 shelves Shelf surface area: 0.3 m². Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Sample extraction system Manual stopper for vials Ice condenser : Capacity: 8.0 kg Performance: 6.0 kg / 24 h Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Height: 1640 mm Weight: ~650 kg Kodpewqd Umefx Aacjdu Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½” hose connection Defrost water drain: ½” hose connection Vacuum exhaust: DN 25 stainless steel pipe Ventilation: DN 6 connection Others : Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts

Condition: excellent (used), Year of construction: 2022, operating hours: 175 h, functionality: fully functional, feed length X-axis: 3,700 mm, feed length Z-axis: 80 mm, power of the milling unit: 12,000 W, type of input current: three-phase, rotational speed (max.): 24,000 rpm, workpiece length (max.): 3,700 mm, workpiece width (max.): 950 mm, table width: 950 mm, input frequency: 50 Hz, air pressure: 6 bar, overall weight: 2,500 kg, working width: 950 mm, Equipment: rotational speed infinitely variable, Lightly used 3-axis CNC machine available immediately! 4-sided formatting 12kW main motor HSK 63F Automatic 4-position tool changer Pickup station for additional tools Drilling head DH17 2 alignment stops in X-direction for short/long panels Foldable tables at front and rear Software on the machine AND in the office with dedicated license Kodpfx Aasxmbm Ascjdu DXF import Modern, fully-featured CNC machine with low operating hours – immediately available!

Condition: new, table length 3000 mm table width 1500 mm burner heads Precitec ProCutter laser capacity in Watt 4000 x-axis 3050 mm z-axis 150 mm y-axis 1550 mm total power requirement 22 kW dimensions 9190 x 3710 x 2200 mm weight of the machine ca. 11200 kg Furnishing: - MOMENTUM GEN - 2 fiber laser cutting machines 3,000 x 1,500 mm - Ytterbium YLS 4000 compact resonator (4 kW) - PRECITEC PROCUTTER laser cutting head - CAD / CAM software BECKHOFF - Controller CP 6242 - 17 "touchscreen, keyboard, control panel, alphanumeric keyboard - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel ... 20 mm - stainless steel ... 12 mm - aluminum ... 10 mm - brass ... 6.0 mm - Copper ... 5.0 mm Kodpfx Aogvq A Eeacedu Workspace: - max .: 3,000 x 1,500 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - s speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) included : - Compatible suction system - Light barrier safety device - Spare part basic supply package Why Fibermak / Fiberlaser? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - Axis speed: reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology - Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical components - therefore, among other things, very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting reflective materials * like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Kdedjvvi Nzopfx Aaceu

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Kodpfxjvvi Rfe Aacedu

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Kdodpfovvi Tysx Aacsu Storage location: Customer

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Ksdpfxovvi Scs Aacjdu