Used Soap Production for sale (15,514)

Condition: like new (used), functionality: fully functional, This line is designed for the production of all types of juices and compotes. It is engineered for continuous processing of the final product, with adjustable capacity up to 2,500 l/h for juices and up to approximately 700 l/h for apple compote. For products with viscosities between juices and compotes (such as purées), throughput ranges from approximately 700 to 1,500 l/h. The line is suitable for a wide variety of applications, including pomegranate juice, apple compote, and similar products. The processing line is capable of heating the selected flow from an adjustable inlet temperature between 30°C/50°C (or as low as 20°C for juices) up to a pasteurisation temperature of 95°C, before cooling the product down for pouch filling, with a setpoint temperature at 75/80°C. INCLUDES: - LOAD CELLS FOR ACCURATE DOSING/MIXING - AUTOMATIC CIP CLEANING SYSTEM - MULTITUBULAR HEAT EXCHANGER THE LINE CONSISTS OF: - 2 TANKS: Nwodpsynkgcofx Adbsc - BRAND: SACOME - AGITATOR MOTOR POWER: 2 HP EACH - MANHOLE INCLUDED - EQUIPPED WITH STAINLESS STEEL VACUUM PUMP - TOTAL TANK HEIGHT: 1.90 M - INTERNAL DIAMETER: 1.18 M - CAPACITY: 2,000 LITRES (EACH) - 1 DEAERATOR TANK: - BRAND: SACOME - CAPACITY: 700 LITRES - 45° CONICAL BOTTOM - SIDE MANHOLE INCLUDED.

Condition: ready for operation (used), functionality: fully functional, A special machine is for sale. It is a complete production line for the manufacture of heating segments. The production line was built and developed by Bosch itself. The heating segments are suitable for instantaneous water heaters. You can see a picture of the segments in the 2nd picture of the picture gallery. The production line also includes a test station. Everything is apparently available in terms of documentation. Njdpfx Adsydlgvebjwc

Condition: used, Cheese Vat, Open Type, Stainless Steel, 6,000 L capacity. Complete stainless steel vat with agitation equipment. Insulated. Very good working condition, last used two months ago. Nwedpfox R U Htox Adboc

Condition: used, Tenoning spindle 1 St. Number of milling agregates 1 St. Spindle diameter 40 mm Small window production consisting of: W. ----- 1) Haberkorn FZS1 slotting machine 2) Okoma SF3F table milling machine 3) Oertli tool for the Haberkorn and Okoma machines Wooden windows 1 set IV 68/78/88 and 1 set wooden aluminium windows IV 68/78 built in 2011 4) Götzinger OBM Plus corner bearing and olive drilling machine, Maco MultiMatic fittings (fitting type can be changed with additonal costs on request!)!) ----- Technical manufacturer's description: - Haberkorn FZS1 slotting machine with automatic feed, -stepless height adjustment D 40 mm Cutting-to-length saw: -Spindle arrangement: top -Three-phase motor: 3 kW -Spindle diameter: 30 mm -Speed: 2800 rpm -Saw blade diameter: 400 mm -Automatic brake with speed monitoring -Horizontal pneumatic positioning, manually adjustable -Protective and extraction hood with extraction nozzle diameter: 100 mm Slotting spindle D 40 mm: -Power: 7.5 kW -Speed: 4200 rpm -Working length: 252 mm -Max. tool diameter: 340 mm -220 mm stroke, infinitely variable height adjustment via precision ball screws -Protective cover and extraction hood with extraction nozzle diameter: 180 mm -Automatic brake with speed monitoring Studio table: -Swivel range +/- 65 degrees -Automatically changing counter blade (programmable) -Pneumatic clamp -High-precision electric degree display -Automatic length compensation -Counter blade for every angle setting in the cutting plane Special equipment: -Laser for workpiece positioning -Pneumatic saw position -Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools -Suction connection nozzles 2 x 120 mm -Spindle length 270 mm -Counter stop ruler with fine adjustment and turret head -Triple stroke, cycle height max. 90 mm -Glass bead cutting saw with protective and extraction hood 80 mm diameter -8 roller feed device with stand and hold-down arm, required for glass bead cutting saw setup -Pneumatically controlled pouring device for edge gear, speed 6000 rpm -2x 3kW motor -Mounting diameter 30 mm ----- 3) Oertli tool for Haberkorn and Okoma machines -1 set of wooden windows IV 68/78/88 -1 set of wood-aluminium windows IV 68/78 Sale of tools in the condition, scope and with accessories as available in our warehouse. Note on window cuts, tool drawings, tool system listings: Engelfried does not guarantee that the tools actually available correspond to the systems mentioned and drawn. ----- 4) Götzinger OBM Plus corner bearing and olive drilling machine -Corner and shear bearings + handle olive drilling -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x olive drill head 24 mm -1x corner bearing double head -Maco MultiMatic fitting -1x adjustable folding stop on the left with 6 stops -1x adjustable folding stop on the right with 6 stops -1x machine stand complete with shelf -220/400 V, 60 Hz, 1.3 kW -1x roller conveyor approx. 1 m long with 2 rollers Nsdpfx Adsxa Hi Nobjwc -1x roller conveyor approx. 1.5 m long with 3 rollers ----- Price of the above machines on request! Plus packaging and shipping -----...

Condition: excellent (used), Year of construction: 2021, Year of manufacturing: 2021 Number of prints: approx. 6,8 millions Condition: excellent Speed: 120 A4 / min. Nodpfxornr Rzo Adbjwc Max. format: 488 x 330 mm, long format up to 1200 mm (width 330 mm) Equipment: 4-colors (CMYK), 1x high capacity stacker, 2x high capacity input module with 4 drawers General description: Machine is in perfect condition and still producing. Printer was and still is under Xerox service contract. Only original Xerox service, spare parts a consumption materials were used. Test printing and inspection is possible.

Year of construction: 2008, condition: ready for operation (used), Produces light sources in the form of tubes, product dimensions: 2-4x100-1200mm, including coating, cleaning, sealing, high vacuum station, labelling station and Compressor ALMIG LENTO 15. Nedpjg Tvy Defx Adbowc

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles Nedpfx Adjx Tu N Hsbjwc and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the co...

Condition: good (used), Year of construction: 2019, total length: 3,250 mm, total width: 1,000 mm, total height: 2,400 mm, 4 compartment trolleys - sorting system 25 compartments max. glass size 3000x2000 mm Nodpfowld Euox Adbjwc

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, total length: 2,000 mm, total width: 1,250 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), saw blade diameter: 450 mm, workpiece width (max.): 300 mm, workpiece height (max.): 30 mm, air pressure: 6 bar, extraction connection diameter: 200 mm, hone diameter: 125 mm, number of spindles: 2, MARINUS PROMAX - Endmatcher and defect saw. The machine is according to following specifications: - Stable and heavy construction, dimensions LxDxH = 2080x1260x2000 mm. - Continuous feeding system with accurate positioning (servo). - Pneumatic sidepushers for guaranteed square angle. - PLC-steering. - Operating by terminal. - Modem for programming at distance. - 2 servomotors for maximum dynamics. - 2 sawingmotors (3,0 kW). - 2 high-speed millingmotors with inverter (7,5 kW each /200 Hz/n=12.000). - 1 motorgearbox with inverter. - 2 drummotors. - 26 pneumatic cylinders with valves. - 1 luminescence-sensor - 6 inductive-sensors - Bandconveyor for waste, height 1,3 mtr. - Machine completely closed by safety-doors. - Machine according to CE-requirements. Length-measuring system: A lenght-measuring-system displays the total lenght and square meters of the boards on the display during production. Tooling: We can offer tooling (tongue and groove) with disposable knives and 2 crosscutsawblades as an option for the machine. Standard Programming: The machine is equipped with 2 main programs: 1 Endmatching 2 Cutting Both main programs have 2 sub programs: 1. Variable lenghts: defects are cut out, endproducts are of all variable lenghts. 2. Fix lenghts: boards will be produced at a fixlenght, infeedlenght has an oversize of max +200 mm. Cutting out defects is not possible. - Min. Width 60 mm - Max. Width 300 mm Nwedpfx Adjq Auhdjbec - Min. Length 500 mm - Max. Length 6000 mm - Min. Thickness 10 mm - Max. Thickness 30 mm

Condition: like new (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, water tank capacity: 10,000 l, Complete mineral water and soft drink production plant for sale, available with brands, staff, or standalone. Nwsdpfx Aexm Rmxodbjc The production line features a mixed configuration, allowing both glass and PET bottle products to be manufactured on the same line. The machine list is available in the documents along with information about the company. The machines have seen little use since 2019 and remain in good condition.

Year of construction: 2011, condition: excellent (used), functionality: unexamined, machine/vehicle number: 24, For sale: Mixer – Raw material agitator from a pellet production line. Thanks to the mixer, the material supplied to the pellet mills is homogeneous. Line capacity where the agitator was used: approx. 8 t/h Mixer dimensions: External length: 6150 mm, External width: 1760 mm, Nwodpfx Adjwxatbsbjc External height: 2740 mm, Internal length: 5000 mm, Internal width: 1490 mm, Internal height: 1750 mm, Ribbon diameter: approx. 1400 mm, Motor power: 22 kW, Agitator price: 25,000 Euro, We also offer a bag filter for the mixer, as shown in the production line photos. Filter price: 7,000 Euro, The machine can be inspected in: Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), Njdpfjyi Ezkex Adbowc - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Bourg Document Finisher with manual feed for set feeding. Stapling, folding, front trimming. 2 stitch heads fed from wire spools. Saddle stitching, block stitching, and corner stapling. Electrical connection: 230V/50Hz, 400kg. Technical data attached as PDF. Top machine at a top price. Nwsdpfx Ajxnl Hpsdboc

Condition: excellent (used), total height: 2,050 mm, This stainless steel mixing tank on a mobile frame, manufactured by Padovan, is designed for mixing, homogenizing, and preparing liquid products in wineries, food processing operations, or light industrial environments. Equipped with a motor-driven agitator, conical bottom, and mounted on a stainless steel frame, it provides a robust, mobile, and operational solution, perfectly suited to workshops requiring flexibility and efficiency. TECHNICAL SPECIFICATIONS LID: - 1 motorized agitator, ensuring homogeneous product mixing - Motorization suitable for stirring and resuspension operations SHELL: - 2 lateral outlets at the lower section: - 1 outlet with Mâcon stainless steel butterfly valve DN 50 - 1 outlet with Mâcon stainless steel butterfly valve DN 40 BOTTOM: - Conical bottom for complete drainage and minimal retention zones - 3 stainless steel feet, 350 mm high, fitted to a mobile stainless frame - 1 total drain outlet with Mâcon stainless steel butterfly valve DN 40 FRAME: Nodpfx Ajyhda Njdbjwc - Sturdy stainless steel frame - Frame dimensions: 1100 × 1200 × 200 mm, ensuring stability and easy maneuverability Applications: - Mixing and homogenizing liquids - Batch preparation, blending, corrections, or additives - Use in wineries, breweries, cideries, or food processing workshops - Mobile process tank or agitated buffer tank This tank is particularly well-suited for operations looking for a reliable, mobile, and easy-to-use mixing solution, without heavy fixed installation. DIMENSIONS - Tank diameter: 1,040 mm - Shell height: 1,250 mm - Total height: 2,050 mm Compact format, easily integrated into a workshop or production area. ADDITIONAL INFORMATION - Suitable for products with a density of 1 - Operating condition: atmospheric pressure - 6-month warranty - CE compliant

Condition: excellent (used), total length: 2,750 mm, overall weight: 161 kg, TECHNICAL SPECIFICATIONS Nwjdoyhdaiepfx Adboc - Material: Stainless steel 304 L - Motor power: 0.37 kW - Housing made of folded sheet metal forming band edges for natural sealing - Support on plastic bearing with anti-jamming sector drum, quick cleaning - Easy belt removal and quick belt release - Drive by flange-mounted gearmotor on left side, with hollow shaft and speed adjustment = 7 to 35 m/min - Tubular drum with rubber-coated guide profile - Smooth white welded belt with guiding profile - Belt scraper with waste collection chute - Electrical control with circuit breaker, equipped with emergency stop on each side (low voltage) DIMENSIONS - Centre-to-centre length: 2750 mm - Working height: 900 mm belt + 400 mm adjustment - Overall dimensions: 2935×1100 mm - Weight: 161 kg APPENDICES - 6-month warranty - CE compliant

Condition: excellent (used), total height: 5,200 mm, tank capacity: 23,000 l, Stainless Steel Storage Tank GD Industrie – 23,000 L – Conical Bottom on Legs – 3 Compartments Designed for food-grade storage, these tanks were previously used for wine, fully meeting oenological and agri-food regulatory requirements. The multi-compartment design offers great operational flexibility, ideal for batch management, volume optimisation, and product segregation within a single vessel. TECHNICAL FEATURES - Total Capacity: 23,000 L (230 hL) per tank - Construction: food-grade stainless steel - Type: vertical storage tank - Bottom: conical - Mounting: on stainless steel legs - Previous use: wine (food-grade application) Compartment Layout (bottom to top): Each tank is divided into 3 independent compartments: - Lower compartment: 9,700 L (97 hL) - Middle compartment: 5,200 L (52 hL) - Upper compartment: 8,100 L (81 hL) This configuration enables: - storage of several distinct batches; - improved volume management; - greater flexibility in wineries or industrial cellars. Equipment per compartment: Nwodpfeyhc U Esx Adbjc Each compartment is fully and independently fitted with: - 1 oval stainless steel autoclave door – 310 × 420 mm - 1 level indicator - 1 full drain outlet - 1 partial drain outlet - 1 stainless steel vent/chimney Ø 200 mm This equipment ensures: - excellent accessibility for cleaning and inspection; - precise transfer management; - ventilation and safety adapted to the stored volume. Applications: These tanks are perfectly suited for: - storage of wine, must, or juice; - vinification and maturation; - large-volume food industry requirements; - industrial sites or cooperative wineries. DIMENSIONS - External diameter: 2,700 mm - Overall height: 5,200 mm Suitable for high-volume tank installations, industrial plants, or large-scale cellars. ADDITIONAL INFORMATION - 6-month warranty - CE compliant

Condition: new, Year of construction: 2023, REF: MM5675 Nwjdpfx Ador I Ddkebsc Vigo semi-automatic T-capping machine. Suitable for applying T-caps to 70cl and 100cl bottles.  Model - PG2010/TV SEMIAUTOMAT T-CAPPER.  Date of manufacture - 2023. Electric supply - 220 V / 50 hz / 1 phase. Supplied with manual, 1 x T stop corker adjustments for 2 x cap types (miniature and normal), 1 x Head and down channel for different “T” caps sizes and castors.  Purchased brand new in 2023 but never used.

Year of construction: 2023, operating hours: 100 h, condition: new, functionality: fully functional, machine/vehicle number: 1500, ICE CREAM FREEZING MACHINES, virtually new, only used for initial testing, located in Seville (Spain): - FREEZER EXPLORER 1500 with piston pumps Njdov Akgnopfx Adbewc - FANUC LR Mate 200iD 7LG robot

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 08020115, input voltage: 400 V, input frequency: 50 Hz, Sausage production line Stuffer Brand Vemag Model HP 12E Year of production 2016 Power 16kW Voltage 400-460V 27A 3~50/60Hz Portioner Nwjdsvztr Dopfx Adbec Brand Vemag Model LPG 209 servo Dimensions 1800X850X1400 Hanger Brand VEMAG Model AH212 Dimensions 4500X800X1500

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 3135471444, color channels: 4, resolution (max.): 2,400 dpi, paper weight (min.): 52 g/m², paper weight (max.): 400 g/m², paper width (min.): 182 mm, paper width (max.): 1,200 mm, paper height (min.): 182 mm, paper height (max.): 330 mm, number of feeding trays: 4, total length: 8,500 mm, total width: 1,000 mm, total height: 1,560 mm, space requirement length: 10,000 mm, space requirement width: 3,000 mm, space requirement height: 2,500 mm, year of last overhaul: 2025, type of input current: AC, input current: 50 A, input voltage: 220 V, Equipment: auto duplex, documentation/manual, raster image processor, EXCELLENT CONDITION production printing machine Xerox Iridesse with EFI Fiery Hyper Rip EX-P. The machine is still under full-service maintenance and can be inspected in full working order. Nedoxv Aknopfx Adbswc

Condition: new, Year of construction: 2026, Bio Machines has been designing production lines, manufacturing machinery, and providing assembly services for over 20 years. We offer both complete production lines and individual machines, tailored to your needs. Our solutions include: Pellet production lines Briquette production lines Drying systems: rotary and belt-type Hammer mills Moving floors Feed bins Wood chippers Chain, bucket, screw, and belt conveyors Cyclones Silos Pellet coolers Sawdust and pellet sifters Bagging machines for small bags and big bags Palletizing lines for bags And many other specialized machines Nodpeylm Tyofx Adbowc

Condition: good (used), Year of construction: 2001, machine/vehicle number: 310 VP 2784, Collating machine / booklet maker Theisen & Bonitz tb sprint 310 VP, machine number 310 VP 2784, year of manufacture 2001, 10 stations, format min. 65 x 100 mm - max. 350 x 500 mm, flat pile feeder, pile height 30 cm, in good condition, available immediately If you are interested, we will be happy to inform you about other machines in our company. Nsdpfxstt Nfyj Adbjwc You are welcome to view the machine at our premises by prior appointment.

Condition: excellent (used), Year of construction: 2023, GHS Type: VDS-S30 / VUTS-EC Vacuum Drying Oven with Vacuum Pump Year of Manufacture: 09/2023 Professional vacuum drying oven with pass-through function – ideal for cathode & anode materials The GHS VDS-S30 / VUTS-EC vacuum drying oven is used for drying cathode and anode materials in battery cell manufacturing. Additionally, it serves as a pass-through into controlled dry rooms (e.g. Njdpfx Aew Ekd Dedbowc

Condition: like new (used), Year of construction: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EGDE COMPLETE LINE INCLUDES: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE FILLER V200, YOM 2010 15.120 RUNNING HOURS CAPACITY 9.000 CARTONS PER HOUR 2. TETRA PAK ACHX 10-0400-44 HELIX CARTON ACCUMULATOR V400, YOM 2010, 17.431 RUNNING HOURS Nwsdpsya Nf Isfx Adboc 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM APGRATED V300, YOM 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 V200, YOM 2010, 10.914 RUNNING HOURS 5. TETRA PAK FILM WRAPPER 32 V400, YOM 2010, NEVER USED, ONLY 45 HOURS! 6. TETRA PAK CARDBOARD PACKER CBP 32 V400, YOM 2010 WRAP AROUND 7. TETRA PAK LINE CONTROLLER LC30+ 8. CONVEYORS SYSTEM 9. INC PRINTER VIDEOJET 1620 THE LINE IS IN AS NEW CONDITION. LOCATION - SWEDEN. READY FOR DISMANTLING AND SHIPPING IMMEDIATELY. PRICE UNDER REQUEST

Condition: excellent (used), Catalogue number 7811 TECHNICAL DATA - Compression force: hydraulic - Briquette shape: round - Briquette diameter: 60 mm - Hopper diameter: 990 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Inspection window - Motor: 5.59 kW - Max. operating pressure: 150 bar - Dimensions (L/W/H): 1700x1350x1550 mm - Weight: approx. 1100 kg ADVANTAGES – Italian manufacture – Used briquetting press – Inspection window – Very good condition Net price: 35,900 PLN Net price: 8,550 EUR based on an exchange rate of 4.2 EUR Nwsdpsyfhh Eofx Adbec (Prices may change due to exchange rate fluctuations)