Used Smoke Chamber for sale (3,502)

Condition: good (used), CTS Type: TSR-30/1000 Water-cooled The type designation of the CTS enclosure series is made up as follows: z. e.g. type TSR -30/1000 1) T means: Temperature 2) S means: stress screening 3) R means: external conditioning 4) -30 means: lower temperature -30 °C 5) 1000 means: 1000 liter test chamber volume Technical performance data: A) TSR-30/1000 basic device without hose connections, i.e. when used as a stand-alone temperature test chamber Temperature tests: Temperature range -40°C to +180°C Final temperature -45°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 6.0 K/min Cooling 5.0 K/min Heat radiation approx. 5000 W at +20°C approx. 4200 W at ± 0°C approx. 3000 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Air volume flow approx.2000m³/h B) TSR-30/1000 basic unit with hose connections, for connection to an external test room provided by the customer Temperature tests: Temperature range -30°C to +170°C Temperature deviation ≤ ±0.1 to 0.5 K in time Average rate of temperature change, measured with short-circuited circuit Heating 4.0 K/min Cooling 4.0 K/min in the range from +150°C to -10°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment, measured with short-circuited circuit Attention: The external test chamber provided by the customer must be absolutely tight and appropriately insulated, any feed-throughs must be optimally sealed on site. Dimensions: Test volume 1000 liters Air circulation connection Ø 200 mm Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm Technical design: Refrigeration unit: water-cooled, low-noise, fully hermetic Infinitely variable capacity adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Fully opening door, door hinge on the left, one-handed operation, lockable. Shelf: Kodpfx Aorivfcea Ejfa Stainless steel, support surface 970 x 980 mm Max. load per shelf 35 kg Total load with max. shelf load 100 kg Test area lighting: Halogen lamp 20 W, 12 V Control: - 32 bit controller - LCD control panel Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 13.3 kW Protection class IP 22 Sound pressure level < 60 dB(A) Weight approx. 850 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Kjdpfxewgayko Aa Eefa Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), White Type: SC/KWT 450 Salt Spray Chamber Technical Specifications: Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Room temperature up to +50°C Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability Ksdpsw Strcsfx Aa Eefa The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW, Rated current 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Model: VT³ 4100 Water-Cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Control System Features: - Color touchscreen with intuitive menu navigation (typically 5.7" or larger) - Programming of temperature/humidity profiles with ramps and dwell times - Data acquisition & logging (e.g., temperature profile, alarms) - USB port for data export (CSV, optionally S!MPATI compatible) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Specifications (Temperature Test Chamber) - Test volume: 990 liters - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Temperature change rate (per IEC 60068-3-5): • Heating: 4.0 K/min • Cooling: 3.0 K/min - Maximum heat compensation capacity: 4500 W - Calibration values: +23 °C and +80 °C - Internal dimensions (W×D×H): 1100 × 950 × 950 mm - External dimensions (W×D×H): 1390 × 1955 × 1995 mm Feed-Throughs: The chamber is equipped with feed-throughs on both the right and left sides, allowing insertion of measuring cables and test devices into the test space. • 1 × L1 nominal width 50 mm • 1 × R1 nominal width 125 mm • 3 × R1 nominal width 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg Important information for buyers: Kfodpfx Aswyu H Eja Eea For your security, the following measures are carried out on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; information may be subject to alteration!) For any further questions, feel free to contact us by phone.

Condition: excellent (used), Weiss temperature test chamber Here we offer a temperature test chamber. Weiss temperature test chamber water cooled Technical data: Test cabinet designation: WT-600/70 Outer dimensions with hinges and door lock height 1995 mm, width 1090 mm, depth 1660 mm Outer dimensions without hinges and door lock height 1995 mm, width 1000 mm, depth 1660 mm Kodpfx Aaoiqk Abo Esfa Internal dimensions: Height 950 mm, width 800 mm, depth 800 mm Test chamber capacity: approx. 600 liters cold / heat operation -70°C to 180°C Temperature change per time cooling approx. 2.5 K/min Heating up approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Fuse on site: 32 A slow blow Permissible test material weight Total load of grate supports 80kg test chamber floor 80kg, insert grate 40kg Refrigerant: R 404A/R23 Weight: 675kg Type: WT-600/70 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), CTS test cabinet climatic chamber Here we offer a CTS climatic chamber. Air cooled Test chamber volume: 200 liters Test chamber dimensions: Height 750, width 650, depth 400 mm External dimensions: Height 1800, width 920, depth 1345 mm Temperature working range temperature range: -40°C / +180°C cooling speed: 4 K / min heating speed: 4 K / min Max. heat radiation at +20°C: 3500 W Temperature constancy, temporal: ≤± 0.3 K. Climate working range Temperature range: +10°C to +95°C. Humidity range: +10%to +98% r.H. Connection: 400 V +6% -10%, 3/N, 50 Hz Rated current 9.4 A Rated power 4,8 kw Weight: approx. 450 kg Refrigerant R404A Type: CTS C-40/200 The following points are carried out on our offered chambers in advance: Kjdpfshwhzwjx Aa Esfa 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), RS Simulators Here we offer a climatic test chamber. Water cooled 300 liters Temperature range from -75 °C to +180 °C Time deviation +- 0.2 K to +- 0.8 K Kfodpeiivgvefx Aa Esa Average heating rate: approx. 2.1 K/min Average cooling rate: approx. 1.2 K/min Humidity range from 10 % to 98 % rel. humidity Working climate range Temperature: 10 °C to 95 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 1000 mm 1800 Height mm 1400 Depth mm Voltage: 3x400V/N/PE Current: 40A Refrigerant: R404a / R23 Type: KS 300 / 75 Weight: 630 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2020, condition: excellent (used), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: designed for a maximum load of 250 kg Specifications for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Heating compensation: max. 8000 W Specifications for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Climate performance data (excerpt) Humidity range: 10 to 98% relative humidity (RH) Humidity deviation (temporal): At chamber center, in steady-state condition, depending on climatic setting: ±1 to ±3% RH Temperature deviation (temporal): At chamber center, in steady-state condition, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to the setpoint (in the range > 20% RH): ±0.5 to ±1 K Operational data: LED strip: 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10%, 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A Chamber is equipped with Greenmode Weight: approx. 2050 kg Buyer Safety Information! The following steps are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) Kjdpow R Rt Ijfx Aa Esfa (Specifications and technical data are subject to change and error!) For further questions, we are happy to answer your call.

Condition: excellent (used), Here we offer a TIRA temperature test chamber. TIRA temperature test chamber air-cooled The chamber has the option for an external test box with external sensor connection can therefore also be used as an external temperature control unit. Temperature range -20°C...+140°C Temperature stability over time ± 0.1°C...± 0.3°C Ksdpenyh T Sofx Aa Eofa External dimensions Width 860 mm x depth 1500 mm x height 2100 mm Test chamber dimensions width 601 mm x depth 545 mm x height 692 mm Electrical connection 400V +6% / -10% 50Hz 3P+N+PE Rated current: 10.0 (max.17) A Rated power: 5.2 (max.9.0) kW Net weight: 735 kg Refrigerant: R404A / R23 Type: TTRE 2001S The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Espec Here we offer an Espec(ThermoTec) stress test chamber. Overpressure humidity tests at over 100 degrees in many different modes Program capacity of 10 patterns with 30 steps per pattern Kodpfjn Arznex Aa Ejfa A variety of protection mechanisms; overheat/overpressure protection, detection of water- supply failure.Complete door interlock and temperature sensor. Saturated Temp Range 105 to 142.9°C Unsaturated Temp Range 105 to 132.9°C Humidity range 50 to 100% r.h. Nominal pressure 0.196 MPa at 132.9°C and 100% e.F. External dimensions: width 740 x height 1553 x depth 1000 mm Test chamber dimensions: Width 355x Height 355 x Depth 426 mm Other equipment: with rails and grid Test material connections in the interior Type: EHS-221M Scope of delivery: See pictures 300 kg Condition: Used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vötsch shock test chamber Here we offer you a Vötsch shock test chamber. Water cooled Temp. range -80C to +220C Hot chamber +50 to +220 Medium chamber -10 to +90 Cold chamber -80 to +70 Mains voltage 400V +-10% 3/N 50Hz Rated current 30.5 A Rated power 13.5 KW Refrigerant VK : R 404A 3.00kg p*: 25bar Refrigerant TK : R23 15bar p* : 25 bar Condition: used / used Type: VT 7012 S3 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: Kjdpfx Aasn Avcuo Ejfa 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Weiss temperature chamber Here we offer a Weiss temperature chamber. Weiss temperature chamber air cooled with Weiss condenser cooler Test chamber capacity approx. 990 liters Data for temperature tests: Temperature range -40°C to +180°C Temperature deviation in time in center of chamber ± 0,1 to ± 0,5 K Temperature deviation spatially ± 0.5 to ± 2.0 K Temperature gradient (acc. to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 4 K/min Cooling 3 K/min Heat compensation max. 4500 W Feedthrough built into basic equipment R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x depth 950 mm x height 950 mm Housing dimensions: width 1390 mm x depth 1525 mm x height 1995 mm maximum load (evenly distributed over the surface) of the test chamber floor 150 kg per insert grate 50 kg total load of the grate supports 100 kg Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 11,5 kW Rated current 22 A Heat output water-cooled test chambers max. heat output to environment 1.3 kW Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: ( converted to R-452a ) weight: approx. 840 kg Type: WT11-1000/40 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components Kedpep Dun Ujfx Aa Eofa 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, RS Simulators Water-cooled temperature test chamber New generation rod program controller (SE-702 with touch panel and data logger for measurement recording) Filter dryer, refrigeration oil, and refrigerant (R23/3.25 kg and R452a/12 kg) new upon delivery, including a leak test, oil strainers, and sight glasses replaced The chamber is supplied with an RMS substructure, a frame for holding the test sample, and a separate control panel (Pure RMS housing, NO shaker included!) The special feature: the RMS substructure can be extended like a shaker using a pallet truck. This facilitates a possible test setup outside the cabinet. Measurement lines can also be routed to the outside via a duct in the base plate of the RMS substructure. The system includes a compressed air dryer, also known as a dew protection device, which prevents condensation during the heating phase (commonly found in electronics tests) Application) Test chamber dimensions: Height approx. 1000mm / Width approx. 1400mm / Depth approx. 900mm Temperature range: -70°C to +180°C Kfsdpfx Aaov Rcbas Eoa Current consumption: approx. 100 A Total power: approx. 50 kVA Cooling and heating capacity: 10 K/min Since the chambers are overhauled and converted, the delivery time from the date of purchase is approx. 8-10 weeks!! Type: TS1000/70-10K For your safety, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a test run monitored by calibrated equipment. Condition: Used Scope of delivery: (Temperature chamber TS1000/70-10K, without test chamber contents, without shaker) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VT 7060 Vötsch VT 7060 Temperature Chamber 600 Liter with Simcon 32-net Chamber is air-cooled Reliable climate chamber for demanding environmental simulations Ideal for laboratories, R&D, and quality assurance. Device description: For sale is a professional temperature chamber from manufacturer Vötsch Industrietechnik, model VT 7060 with SIMcon 32-net controller. This high-performance unit is suitable for a wide range of demanding environmental simulations, Kfedewybb Nepfx Aa Eoa from material testing and electronics tests to long-term climate stress tests. Technical data (summary): Model: Vötsch VT 7060 Internal volume: approx. 600 liters Temperature range: –70 °C to +180 °C Temperature deviation when stabilized: Temporal: ±0.1 K to ±0.5 K Spatial: ±0.5 K to ±2.0 K Temperature change rate (without test specimen): Heating: 4 K/min Cooling: 3 K/min Control: SIMcon 32-net with touch panel Interfaces: RS232, optionally RS485/422 1 × port, NW 50 mm, left 1 × port, NW 125 mm, left 2 × ports, each NW 125 mm, right External dimensions (approx.): Width 1090 × Height 1960 × Depth 1995 mm Internal dimensions (approx.): Width 800 × Height 800 × Depth 950 mm Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerants: R 404A and R 23 Weight approx. 675 kg For your safety as a buyer, please note the following: The following steps are carried out on all chambers we offer: 1. Functional test and replacement of necessary components 2. If necessary, new charge with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Shipping / Collection: Collection preferred Shipping via freight carrier on pallet possible Europe-wide. (Shipping costs according to expenditure) Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Espec Type: PSL-2KPH Thermo TEC Espec Temperature and Climate Test Chamber, Air-Cooled Kfjdew D Dgvepfx Aa Eja Temperature range: -70°C to +150°C Humidity range: 20 to 98% rH Temperature/Humidity Fluctuations: ± 0.3°C / ± 2.5% rH Temperature/Humidity Stability: ± 0.5°C / ± 3% rH Heat-up time: from -70°C to +150°C in 50 min Cool-down time: from +20°C to -70°C in 80 min Test chamber dimensions: width 600 mm x height 850 mm x depth 600 mm External dimensions: width 1010 mm x height 1690 mm x depth 1173 mm Test chamber volume: 306 liters Refrigerants: R-404A, R-508A Stainless steel construction Connection: AC 400V 3~ 50/60 Hz Max. 18 A Rated power: 1.5 kW Net weight approx. 400 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New charge with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (see photo) (Technical data and specifications may be subject to change and errors!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Espec Model: PSL-4KPH Espec Temperature and Climate Test Chamber, Air-Cooled There is a minor dent at the upper edge of the door (see photo). The door closes perfectly, the seal is intact, and the climate chamber operates without any technical issues. The dent is purely cosmetic and does not affect function, sealing, or control accuracy. Temperature range: -70°C to +150°C Humidity range: 20 to 98% r.h. Temperature/humidity fluctuation: ± 0.3°C / ± 2.5% r.h. Temperature/humidity stability: ± 0.5°C / ± 3% r.h. Heating/cooling rates & times: Heating rate: 5.0°C/min Cooling rate: 3.0°C/min Test chamber dimensions: Width 1000 mm x Height 1000 mm x Depth 800 mm External dimensions: Width 1410 mm x Height 1983 mm x Depth 1593 mm Feed-through with silicone stopper, 100 mm With RS232 interface Test chamber volume: 800 liters Refrigerants: R-404A, R-508A Stainless steel construction, AC 400 V 3φ, 50Hz, 31 A Net weight approx. 720 kg For your safety as a buyer, please note the following: Kjdpfx Aajwz Er Us Eofa The following points are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New refill with legally compliant refrigerants 3. After successful inspection, the chambers undergo a trial run monitored by calibrated devices. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and correction!) We would be happy to answer any further questions you may have by phone.

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation in time K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Kjdpfxeuxq T Dj Aa Esfa Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! Kedpfx Aajvba Rae Eofa The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a temperature shock test cabinet. White Temperature Shock Test Cabinet Air Cooled Kfodpfxolgux Aj Aa Esa Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot/cold chamber 10 s Temperature constancy ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width ( without and with door hinge ) without....approx. 1820 mm with....approx. 1850 mm Depth ( without and with test room door ) without....ca. 900 mm with....ca. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), CTS Type: C-40/350 CTS air-cooled temperature test chamber Test chamber volume 350 liters Test chamber dimensions: Height 750 mm Width 650 mm Depth 720 mm External dimensions: Height 1800 mm Width 850 mm Depth 1640 mm Design: Floor-standing appliance Temperature working range: Temperature range -40°C/+180°C Cooling speed: 4.0 K/min Heating speed: 3.0 K/min Electrical connection: 400V +6-10 %, 3/N, 50Hz Connected load: 5.5 kW Rated current: 8.3 A Condenser refrigeration machine: Air-cooled Refrigerant: R-404A Weight: 550 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Kfsdjg Sr Egopfx Aa Esa

Condition: excellent (used), CTS Temperature Test Chamber Here we offer you a CTS temperature test chamber. Water cooled CTS temperature test chamber Technical performance data: Temperature working range temperature range -70°C / +180°C cooling speed 3,0 K/min Heating speed 3.5 K/min Temperature constancy, temporal ≤± 0.3 K. Dimensions: Test volume: 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6% -10%, 3/N, 50 Hz connected load 8,2 kW, 14,2 A Refrigerant: R404A / R23 Weight: 600 Kg Type: T-70/600 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: Kjdpfxjichkve Aa Eofa 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer Vötsch shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: The temperature control of the warm chamber ranges from +50°C to +220°C Temperature deviation in time in the center of the chamber ± 1 K Temperature deviation spatially ± 2 K Temperature change rate heating 11 K/min cold chamber: the cold chamber from -80°C to +70°C Temperature deviation temporally in useful space center ± 1 K Kfsdpfoigg Hnjx Aa Eja temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions width 470mm depth 650mm height 410mm Outer dimensions width 930mm depth 2115mm height 1970+mm Feedthrough ∅ 67mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: VT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber water cooled Temperature range -70°C to + 180°C Temperature deviation temporal ±0,1 to ±0,5 K Temperature deviation in time ±0.5 to ±2.0 K Temperature change rate cooling 7.5 K/min Temperature change rate heating 7.5 K/min Heat compensation +20°C 3000 W Heat compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 450 mm Height 750 mm Outer dimensions: Width 870 mm Depth 1280 mm Height 1575 mm Observation window: Width 300 mm x height 540 mm Test chamber volume 190 litres Rated voltage: 3/N/PE AC, 400 V ±10 %, 50Hz Rated power: 10.5 kW Rated current: 22 A Fuse, on-site: 32 A slow-blow Sound level at 1m distance (free field measurement) < 69dB (A) lateral feed-through 50 cm / 125 cm Cabinet is water cooled Refrigerant: R 404A and R 23 Weight approx. 460 kg Ksdpshh H Hisfx Aa Ejfa Type: VTS 7018-5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. function check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), CTS climate chamber climate test cell Here we offer a CTS climate chamber climate test cell. Available from mid-January 2023! Water cooled Height adjustable! Footprint approx. (W x D x H): 3755x 3470x 2480 Test area approx. (W x D x H): 2500x 2720x 2200 Test space volume: approx. 15m³ Temperature range: -40°C to +140°C Temperature deviation 1 K temporally Temperature change speed in the average without heat radiation Measured in the supply air Kodpfx Aaeip Dp Se Ejfa heating: 2 K/min Cooling: 1 K/min from +110°C to -35°C Climatic tests: Temperature range: +10 °C to +90 °C Humidity range . +30 % to +95% r.H. dew point range : +5°C to 89°C temperature deviation 0,5 K temporal Humidity deviation ±1- ±3% r.H. temporal nominal voltage: 400V 3/N, PE, 50 Hz rated power: 53,5 KW Rated current: 92,3 A Compressor: S6J-16.2 + chiller Refrigerant: R404A Weight 5500 kg Type: CW-40/16 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a Köhler salt spray chamber. Salt spray chambers: diverse testing possibilities from salt spray test to fully automatic alternating test easy operation by graphical menu guidance customized versions for many applications easy operation via touch panel internal dimensions W x D x H (without hood) 1080 x 675 x 580 mm Kfsdpjnr Hi Sofx Aa Eja external dimensions W x D x H 1940 x 900 x 1220 mm Test chamber capacity 500 liters Chamber temperature Rt +5 - 60°C Humidifier temperature Rt +5 - 75°C Mains connection 230V 1P 50/60Hz 2000W Compressed air 4,5 - 8.0 bar / 3Nm³/h Brine supply 140 liters Stainless steel version Refurbished and converted to Comfort control - Renewal of all electrical components - Renewal of all hose connections Type: HK 500 400 Kg Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.