Used Sleeve Mandrel for sale (1,183)

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Gjdpfspu R Nvox Afkebn Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: excellent (used), Year of construction: 2009, decoiler - expansion mandrel type: AE-050 strip width: 400 - 1.500 mm strip thickness: 0,5 - 3 mm Gsdpsupg Scefx Afkjbn coil weight: 20 t coil OD: max. 1.800 mm mandrel Ø: 508 mm year: 2009

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter -Adapter for the cone in the chuck of a lathe -Outer mounting: MK8 (Ø80 mm to Ø75 mm) -Number: 7 recordings available -2x mounting: internal tool MK6 -5x recording: internal tool MK5 -Price: per piece Godpfx Ajc U Dpmsfkebn

Condition: used, Specification 1: H=35.643 Specification 2: ø 50.000 Unknown gauge mandrel ø 50.000 mm with taper shank. Gbedpfsw Ut D Rsx Afkon

Condition: used, bore 25 mm Diameter 40 mm length in total 136 mm Gbsdpfx Afoqz A Ecoken material Stahl

Condition: excellent (used), Abrasive mandrels ,different sizes also single to give away. Gedsk R Tnpepfx Afkjbn Diameter : 8-10-12-13-14,8-15-16-17-18 mm price piece 10 Euro Diameter : 20-22-25-28 mm Price per piece 12 Euro Diameter : 30-32-34-35-36-38-mm Price per piece 15 Euro Diameter : 40-42-45-48 mm Price per piece 20 Euro Diameter : 50-52-55 mmPrice per piece 25 Euro Diameter : 60-62-65-68 mm Price per piece 30 Euro per piece Diameter 70 mm price per piece 40 Euro Diameter 80 mm price per piece 50 Euro We are also happy to offer you a package price.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: A-200711, total length: 2,450 mm, total width: 780 mm, total height: 1,150 mm, input voltage: 220 V, A washing system for anilox rollers and sleeves is for sale. Further information can be found in the photos. Gbedpjww Tzijfx Afkon

Condition: ready for operation (used), ERCOLINA TOPBENDER with 2-axis positioning system / 3 meters Godsy T Namopfx Afkjbn -CE marking -Pipe capacity 60mm -Bending radius R10-R300 -Bending angle 0-180 degrees -Motor power 1.5 KW -Bending speed 1.25-1.5 revolutions/min -Includes 2-axis positioning system / 3 meters -2 sets of tooling with sliding shoe R100-1-1/4 & R67-25mm -Foot switch -Documentation Dimensions: L x W x H (base machine) 0.7 x 0.9 x 1.4 meters / Total weight 220 kg Errors and omissions excepted.

Condition: used, functionality: fully functional, actuation type: manual, mandrel diameter: 508 mm, mandrel length: 400 mm, turntable diameter: 1,800 mm, Floor to mandrel center: 1000 mm Outer diameter stop: 1800 mm Mandrel length: 400 mm Mandrel nominal diameter: 508 mm Coil limiting rings: on both sides Braking: pneumatic, brake disc/caliper Mandrel expansion: threaded spindle with socket wrench Mandrel drive: electric, geared motor Godpfxoy Smkaj Afksbn The machine was in perfect working order in production at the customer's site until it was dismantled. We can assist you with integration, including: Planning Mechanical overhaul Control system engineering Painting Safety concept CE documentation

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Number of clamping sleeves: 29 pieces -Various sizes: Ø 9-35 mm -6,10,13,14,20,20,20,20,22,24,24,24,26,26,27,28,30,30,30,32,33,3 3,35,35,35,35,35,35 -Cone: 44 to 55 mm -Shaft: Ø 42 mm -Sale: only as a package -Weight: 16 kg Gjdob A Swkspfx Afkjbn

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW Gbodpfx Afstr U Hlekon → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: Gsdpfx Afettah Rsksbn → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: good (used), Year of construction: 1996, Tube diameter: 4-28 mm Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Delivery rate: 4.5 l/min Max. bending angle +/-: 190° Nominal pressure: 250 bar Operating pressure: 3095 bar Gbjdpfoy Uwrtox Afkjn Delivery rate: 4.5 l/min Total power requirement: 1.5 kW Drive: Hydraulic cylinder and roller chain

Condition: excellent (used), Very good condition, precision holder from the renowned brand WNT, made in Germany. Equipped with Centro-P HPC16 bush, ensuring high runout accuracy and stable tool clamping. A solid carbide VHM end mill for precision machining is mounted on the holder. Total length A=100, SK40 mounting type (DIN 69871 AD). Premium-class equipment, ready for work on CNC machining centres. Gsdpow Rrzmofx Afkobn

Condition: used, Year of construction: 1988, gebraucht 1988 090151 prompt, Zwischenverkauf v Italien 12800 € 1 Gsdpoxx A Eksfx Afkobn 42 mm 4665 mm 800 mm 1160 mm 1470 kg 42 x 2,5 mm 40 x 1,2 mm 30 x 40 x 1,7 mm 40 x 30 x 1,3 mm 255 mm 22 mm 180 ° 90 °/s 5.5 kW 120 l Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV regulations Tools not included BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: good (used), Clamping head, dead-collet chuck, collet sleeves, collet, tool holder, milling chuck, milling tool, clamping sleeves -Clamping sleeves: 17 pieces -Diameter: Ø 6 - 20 mm, see photos Godowc R Dfopfx Afksbn -Price/Delivery: complete -Transport dimensions: 230/120/H60 mm -Weight: 2.5 kg

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Gbodpfxsvv Uy Sj Afken -Clamping sleeves: Length 85 mm, 79 pieces -Sizes: Ø 1 - 20 mm, see photos -Price/Sale: complete -Dimensions: 310/200/H150 mm -Weight: 13 kg

Condition: good (used), clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Clamping sleeves: length 80 mm, 23 pieces -Sizes: Ø 8 - 40 mm, see photos -Price/Delivery: complete Gsdpfx Aou T Tpnjfksbn -Transport dimensions: 360/260/H80 mm -Weight: 19.2 kg

Condition: good (used), clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves Gedpfou Uwwlox Afksbn -Clamping sleeves: length 70 mm, 17 pieces -Sizes: Ø 10 - 40 mm, see photos -Price/Delivery: complete -Transport dimensions: 300/170/H70 mm -Weight: 9.3 kg

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Gbodpfx Afoyz Sl Usken -Clamping sleeves: Length 42 mm, 37 pieces -Sizes: Ø 2.5 - 18 mm, see photos / parts list -Price/Fee: complete -Transport dimensions: 180/160/H42 mm -Weight: 3.0 kg

Condition: used, various adaptors for MK pictures 5 x 5 on 4 2 x. 5 to 3 1 x. 5 to 2 1 x. 5 to 1 1 x. 6 to 4 1 x. 6 to 5 1 x. 4 to 3 1 x. 3 to 2 Gbedpfedgcd Aox Afksn

Condition: used, Drill sleeve MK 4 Length 170 mm Gedpfxeb Tyqae Afkjbn Diameter 63 mm

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 125 mm, 27 pieces -Sizes: Ø 0.7 - 17 mm, see photos / parts list Godpfxjyzyiuj Afkebn -Price/Fee: complete -Transport dimensions: 195/180/H130 mm -Weight: 4.7 kg

Condition: new, functionality: fully functional, machine/vehicle number: 314567.00, number of clamping sleeves: 1, mount diameter: 30 mm, clamping range: 30 mm, Collets / collet caps / support sleeve for collet device new - unused 5 collet caps for collets, size Ø30, item no. 314567.00 4 collets, size Ø30.0 1 support sleeve for collet, size Ø30 - for Reishauer RZ 301 / RZ 362 from our stock Price / details on request All technical data subject to errors/omissions. We sell exclusively to countries within the European Community. Gbedpowccp Hsfx Afken

Condition: ready for operation (used), No. of sleeve heads: 1 Linear design Type of sleeving: Full product sleeve / partial / bottom sleeve Gbedpfoy A Tlfox Afken Capacity: up to 12,000 pcs/hour