Used Ski Grinding Machine for sale (93,924)

Condition: used, functionality: not functional, Bovone 371 glass beveling machine, disconnected and ready for loading. Working daily until recently, but limited to around 1m length of glass, due to needing some belt renewals. Now breaking for parts, all available for sale. Bljdpfjxbq Dysx Adxjp Prices subject to part required.

Condition: excellent (used), functionality: fully functional, Herminghausen SR2 High-precision and conventional centerless cylindrical grinding machine. High machine stability thanks to a robust cast iron bed and hydrodynamic plain bearing support. Thanks to the low design height, there is excellent accessibility to all key functions. Quick and easy retooling for different workpieces and materials. The machine is in very good mechanical and electrical condition and is ready for immediate operation. A vibratory conveyor for workpiece removal and a vibratory bowl feeder with a diameter of 620 mm including table are included. Electrical documentation is available. Bjdpfx Adsxrg Tlexelp Partial overhaul August 2025 Workpiece diameter: 0.5 - 40 mm Grinding wheel dimensions (DxWxB): 290 x 100 x 150 mm Control wheel dimensions (DxWxB): 200 x 100 x 120 mm Hydrodynamic plain bearing support for both grinding and control wheel spindles Infinitely variable control wheel speed regulation with digital speed display Plunge grinding via cam-controlled plunge grinding attachment Through-feed grinding possible with separate feed jaws

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Blodovvkipspfx Adxsp

Condition: used, Year of construction: 2010, functionality: fully functional, total width: 2,400 mm, total length: 2,500 mm, total height: 2,300 mm, feed length X-axis: 750 mm, feed length Y-axis: 485 mm, feed length Z-axis: 335 mm, travel distance X-axis: 750 mm, travel distance Y-axis: 485 mm, travel distance Z-axis: 335 mm, grinding wheel width: 600 mm, table width: 300 mm, overall weight: 4,800 kg, Capable of creep feed grinding, plunge grinding, and transverse grinding. This machine also comes with 2x Rotary Diamond Disc dressing units, one unit being stationary and the other unit being an extremely rare option on these machines which is a motorized "swivel" rotary diamond disc dressing unit with a stationary diamond on the end (see pictures). Bjdpfx Aexaqm Sjdxelp

Condition: like new (used), Year of construction: 1995, Grinding area: 200 x 400 mm Table travel x longitudinal/y transverse: 420/190 mm Maximum distance between table and spindle center without magnetic chuck: 415 mm Blsdpfx Asxmflcodxsp Table speed longitudinal hydraulically infinitely adjustable Table speed transverse electrically infinitely adjustable Vertical movement electrically infinitely adjustable Grinding wheel dimensions: 225 x 25 x 51 mm Grinding wheel speed, DC, infinitely adjustable Grinding motor power: 2 kW Total electrical connection: 400 V, 5 kW Machine footprint: 1600 x 1350 x 2200 mm Control cabinet footprint: 800 x 300 x 1200 mm Weight: 1000 kg

Year of construction: 2002, condition: ready for operation (used), Control Unit Brand SIEMENS Bedpfx Adsxnr Imoxjlp Model Sinumerik 840 D This GEIBEL & HOTZ RS 2000 CNC cylindrical grinding machine was manufactured in 2002. It features a center height of 230 mm, a center width of 2000 mm, and a maximum grinding diameter of 355 mm. Equipped with Siemens 840 D control, it has a drive power for the external grinding spindle of 9 kW and an internal grinding spindle of 2.2 kW. Total weight is 10000 kg. Contact us for more information about this machine. Application Types Grinding

Condition: good (used), Year of construction: 1994, Grinding belt size: 100x1830 mm Max. external dimensions: Width: 1200 mm Bljdpfxoxr Dcdj Adxep Depth: maximum approx. 900 mm Support table/depth approx. 600 mm Weight: approx. 200 kg

Condition: like new (used), Year of construction: 2021, operating hours: 1,117 h, functionality: fully functional, 8 cup wheels vertical glass edging machine with higher rack total working meters : 36019 mtrs condition as new min. glass size height : 35 mm glass thikness : 3 - 40mm speed : 0,5 - 5 m/min. Bedpfx Adswlgfdoxolp total power : 20 kw machine dimensions : L : 7 m , W: 1,6 m , H. 3 m weight : 3330 Kg glass weight : 200 Kg/m

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Bsdpfx Aowhqpredxslp

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15/30 m/s total power requirement 3,0 kW weight of the machine ca. 159 kg dimensions of the machine ca. 768 x 1185 x 1417 mm Bedpfst Hyqgsx Adxelp Mobile belt sander PASOVEC 75 RUNNER Pasovec 75 RUNNER - the special belt grinder developed for Surface grinding applications, especially for grinding weld seams in the material surface. Pasovec 75 Runner removes unwanted layers that occur when Sheet metal rolling or after sheet metal cutting with plasma or oxygen arise. Innovative, multifunctional machine Stepless adjustment of the grinding depth Equipped with a dead man's switch Station for flat grinding small workpieces Low running costs

Condition: new, Year of construction: 2025, 0600 mm 300 mm 382 mm 700x340 mm Bledewp Tpdopfx Adxep 355x38x127 mm 1500 U/min

Condition: like new (used), Year of construction: 2018, Stöckel FX 60/30 ST 2 Stöckel FX 60/30 ST 2 Surface Grinding Machine with STÖCKEL ST-2 Control, Year of Manufacture 2018, in Excellent Original Condition The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2018 Power supply: 3/N/PE Operating voltage: 400 V Control voltage: 230 V/24 V DC/130 V DC Frequency: 50 Hz Connected load: 14 kW / 21.5 A Main fuse: 32 A Max. grinding area: 630 x 300 mm Standard magnetic chuck dimensions: 600 x 250 mm Max. table longitudinal travel: 680 mm Max. cross travel: 305 mm Max. distance from table to spindle center: 650 mm Max. table load: 400 kg Table speed: 2 – 30 m/min Rapid traverse cross movement: 1.3 m/min Automatic cross feed: 0.3 – 40 mm (intermittent, optionally continuous) Rapid traverse vertical movement: 600 mm/min Grinding wheel (standard: outer x width x bore): 300 x 50 x 127 mm Rib width: max. 60 mm Grinding wheel motor rating: 5.5 kW Hydraulic pump power rating: 2.2 kW Bedswz Imhjpfx Adxjlp Cross travel power rating: 0.35 kW Vertical rapid traverse power rating: 0.75 kW Total connected power: 12 kW Total weight of the machine: 3600 kg Operating noise level: 80dB(A) according to EN 31201 Hydraulic oil capacity: 125 l Coolant capacity: 90 l Accessories and Equipment: - 1 piece coolant unit - Electronic handwheel - Extraction unit - Operating manual, electrical schematics - Machine mounting pads - Grinding wheel About the Machine: We are offering a Stöckel FX 60/30 ST 2 surface grinding machine with automatic cycle, year 2018, in very good condition. The machine is, of course, fully operational. All slides move very smoothly and uniformly. Even at high speeds, the Stöckel runs very quietly. This newer generation of grinding machines is extremely user-friendly and is capable of producing surfaces in the low Rz range. Take advantage of the opportunity to view this machine under power on-site and see its condition for yourself. About the Controls: The STÖCKEL ST-2 control system provides all the functions needed for economical surface and plunge grinding. Inputs are made using softkeys on the control panel, while all information is presented graphically in color on the display. The control is intuitively designed and easy to learn in a short time. No ISO programming skills are required. The control is suitable for both automatic grinding cycles and for manual adjustment via electronic handwheel. The operator can intervene in an ongoing grinding cycle at any time, changing parameters or taking over feed via the handwheel. The control features the following: • Surface grinding program subdivided into rough grinding, finish grinding, and spark-out • Plunge grinding program subdivided into rough grinding, finish grinding, and spark-out • Multiple-plunge program (for rapid material removal) • Automatic dressing: A regular automatic dressing cycle can be triggered during grinding based on various criteria such as "grinding dimension" or "number of strokes." Dressing before finish grinding is also possible. • When the "speed control" option is selected, different cutting speeds can be set for roughing, finishing, and dressing operations.

Condition: used, Year of construction: 1990, table length 800 mm Bsdexmk Ezspfx Adxslp table width 300 mm grinding wheel diameter 400 mm grinding wheel width 50 mm turning speed range 1470 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), AGATHON 150 SL2 Centerless cylindrical grinding machine TECHNICAL DATA Working wheel: Diameter: 150 mm width: 50 mm Bore: 50 mm Regulating disk: Diameter: 100 mm Width: 50 mm Bore: 40 mm Workpiece diameter: Bledpsr Hdi Aofx Adxop Minimum: 0.1 mm Maximum: 12 mm Max. Length for plunge-cut grinding: 49 mm Weight: 750 kg Connected loads: 3 X 380 V / 50 Hz Compressed air: 5-6 bar Dimensions: Machine: 1000 x 500 x 880 mm Electrical cabinet: 1550 x 540 x 420 mm Coolant tank: 750 x 550 x 700 SCOPE OF OFFER U.A: (list not exhaustive): Grinding wheels regulating wheels Spare flange mandrel Grinding pads Complete operating documentation Exact scope of offer according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided.

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Bsdpfjwhqplsx Adxslp

Condition: new, width of the strips 75 mm band length 2000 mm band speed 30 m/s total power requirement 3,0 kW weight of the machine ca. 70 kg dimensions of the machine ca. 610 x 944 x 1419 mm Bjdpfek Uqg Ssx Adxjlp Mobile belt sander PASOVEC 75 RUNNER Pasovec 75 RUNNER - the special belt grinder developed for Surface grinding applications, especially for grinding weld seams in the material surface. Pasovec 75 Runner removes unwanted layers that occur when Sheet metal rolling or after sheet metal cutting with plasma or oxygen arise. Innovative, multifunctional machine Stepless adjustment of the grinding depth Equipped with a dead man's switch Station for flat grinding small workpieces Low running costs

Condition: new, Year of construction: 2025, 0600 mm 300 mm 382 mm Bjdowp Taiopfx Adxolp 700x340 mm 355x38x127 mm 2400 U/min

Condition: good (used), Year of construction: 1991, Technical data - Table surface: 800 x 450 [mm] - Grinding surface: 800 x 500 [mm] - Max. distance between table surface and spindle: 650 [mm] - Max. weight on the table: 400 [mm] - Spindle speed: 1400/1700 [tr/min] Bjdpfxsvx E Rtj Adxolp - Dimensions of the grinding wheels: 350 x 127 x 50 [mm] - Dimensions of the machine: 3350 x 2100 x 1750 [mm] - Weight: 2900 [kg]

Condition: used, Year of construction: 1988, Year 1988 In our opinion, the machine is in good used condition and can be inspected Bledexmk Eujpfx Adxjp under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW Bljdpfx Aevca Izjdxjp No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2000, Jung Supromatic HF 50 EVO Jung Supromatic HF 50 EVO Surface Grinding Machine, year of manufacture 2000, in excellent, fully overhauled original condition. The machine comes from the technical center of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2000 Technical specifications Clamping surface (L x W in mm): 600 x 200 Maximum grinding area (L x W in mm): 600 x 250 Maximum magnet size (mm): 500 x 200 Maximum grinding wheel dimensions (mm): 225 (250) x 25 x 51 Table to spindle center distance (mm): Max. 400 Table longitudinal feed (reciprocating, m/min): 1 – 20 Creep feed (mm/min): 0 – 500 Grinding spindle drive speed (rpm): 800 – 4200 Power output kW (with creep feed): 1.6 – 2.2 Approximate machine weight: 2.0 t Accessories and Equipment: • Magnetic chuck • Coolant system • Machine feet • Grinding wheel About the machine: We offer a Jung HF 50 EVO surface grinding machine, year 2000, in excellent condition. The machine is, of course, fully functional and has only approx. 50 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung operates very quietly. This newer generation of surface grinders is highly user-friendly and enables the production of surfaces with a low Rz value. Take the opportunity to inspect this machine under power on site and see its condition for yourself. Scope of overhaul: Mechanical service: • Complete mechanical overhaul • Hydraulics • Infeed mechanism • Lubrication • Cross and vertical adjustment • Grinding spindle • Wheel dresser • Repainting in new machine quality Geometric service: • Guideway grinding by the manufacturer (optional) • Scraping of guideways • Column realignment, measurement, possible scraping/grinding, refitting with pressure plates, inspection and preparation of guideways • Adjusting crosshatch at spindle head • Alignment of wheel dresser • Regrinding of table and magnet • Machine acceptance according to manufacturer’s test sheet Electrical service: • Replacement of complete wiring, all limit switches and pushbuttons • Conversion of X-axis from cam switch to contactless limit switches (HF 50) • New control cabinet • RSF position display (2- or 3-axis readout) • Magnet holding force control for 24V or EP magnetic chuck Control modernization: • New auxiliary control cabinet (operator panel top right) • Thyristor control for grinding spindle drive • Manual cylindrical wheel dressing with top dresser or side dresser (for Diaform operation) Bledpfx Adewzmgyoxep

Condition: good (used), Year of construction: 1987, TSCHUDIN Type HTG-610 U660 TSCHUDIN Type HTG-610 U660 Cylindrical Grinding Machine, year of manufacture 1987, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. TECHNICAL DATA Blsdpfow Iqr Sjx Adxep MAIN DATA Centre distance: 600 mm Centre height: 100 mm Total power requirement: 4-8 HP MACHINE TABLE Table travel max.: 620 mm Table speed, stepless up to: 5 m/min Reversal delay up to: 4 sec Chuck base swivels: 7° GRINDING SPINDLE HEADSTOCK Wheel diameter: 300 mm Wheel bore (with 300 mm diameter): 127 mm Motor power with 300 mm wheel: 2.5 HP WORKPIECE SPINDLE HEADSTOCK Swivelling range: 360° Spindle taper: MT 4 Spindle speeds, stepless: 65-500 rpm Motor power: 0.5 HP TAILSTOCK Quill internal taper: MT 3 Quill stroke: 20 mm INTERNAL GRINDING ATTACHMENT Spindle diameter max.: 80 mm Motor power: 1.5 HP COOLANT TANK Capacity: 100 litres Dimensions (LxWxH): 2160 x 1200 x 1350 mm Weight: 2600 kg About the machine: We are offering a TSCHUDIN Type HTG-610 U660 cylindrical grinding machine with automatic cycle, year 1987, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Tschudin also operates very quietly at high speeds. Take advantage of the opportunity to inspect this machine under power on-site and see its condition for yourself. You can find further cylindrical grinding machines from reputable manufacturers on our website.

Condition: excellent (used), Year of construction: 2015, Okamoto ACC 64 CA Surface grinding machine Okamoto ACC 64 CA with CA Surface Grinding Control, year of manufacture 2015, excellent condition. CE compliant!! The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: - Year of manufacture: 2015 - Table size: 605 x 400 mm - Table travel: 800 x 440 mm - Distance spindle center (min/max): 22.5 – 522.5 mm - Max. load: 1000 kg - X axis longitudinal travel: 3000 – 25000 mm/min - Y axis crossfeed: 0 – 2000 mm/min - Rapid traverse: 4000 mm/min - Z axis infeed: 0.0001 – 0.001 mm - Rapid traverse: 1000 mm/min - Grinding wheel: 355 x 38 x 127 mm - Speed: 500 – 2500 rpm - Motor: 5.5 kW - Weight: 4950 kg - Dimensions: 3550 x 2695 x 2203 mm Accessories and features: About the machine: Bledpfsxp H Ikex Adxsp Offered here is a surface grinding machine Okamoto ACC 64 CA with CA Surface Grinding Control. This universal surface grinding machine is in excellent original condition. It comes from a facility where it was only lightly used for training purposes. The control is very easy to operate. With a grinding path of 800 mm longitudinally and a cross travel of 400 mm, this machine is ideal for toolmaking, jig manufacture, and small batch production. The series stands out for its comprehensive standard equipment and ease of operation. The robust spindle head design and the double V-guideways in both longitudinal and cross axes ensure lasting precision. The intuitive operation of the control elements simplifies handling and significantly increases productivity. The guideways are automatically lubricated via a central lubrication system. The Okamoto has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Okamoto under power on site. You can find further surface grinding machines from reputable manufacturers on our website.

Condition: like new (used), Year of construction: 2019, Weight 6250 kg Size 5810 × 2545 × 2445 mm Design Table clamping area 1500 x 600 mm Bsdpovwdhhsfx Adxjlp Max. table load 1300 kg Longitudinal table movement 1600 mm Table groove (number/width) 3/ 16 mm Table feed 7 – 25 m/mm Min./Max. Distance spindle nose-table max. 600 mm Handwheel pitch vertical 0.002 mm Handwheel revolution vertical 0.5 mm Automatic grinding feed 0.002 – 0.02 mm Vertical rapid traverse (Y-axis) 230 mm/min Cross travel 660 mm Cross feed per stroke 0.1 – 12 mm Cross rapid traverse 1250 mm/min Handwheel pitch transverse 0.02 mm Handwheel revolution transverse 5 mm Grinding spindle motor 7.5 kW Grinding spindle speed 1450 rpm Grinding wheel 355 x 50 x 127 mm Hydraulic motor 3.7 kW

Condition: excellent (used), Year of construction: 1997, DETAILS PRECISION SURFACE GRINDING MACHINE Manufacturer: JUNG Model: JF 520 Year of manufacture: 1997 Machine weight: 2200 kg Total weight: 2600 kg Location: Haiger Price: €24,000 excl. VAT Description: Serial no.: 3821, Digital readout, manufacturer Heidenhain, microprocessor control, profile dressing device, manufacturer Diaform, machine lighting, coolant system, magnetic clamping table. Technical Data: Bjdpfoxqa I Tsx Adxelp Clamping surface (L x W in mm): 600 x 200 Grindable area (L x W in mm): 600 x 250 Max. magnet size mm: 600 x 200 Max. grinding wheel dimensions (mm): 225 x 25 x 51 Distance table/spindle center (mm): 350 (+50) Table longitudinal feed reciprocating (m/min): 1 – 20 Creep feed (mm/min): 0 – 500 Grinding spindle drive speed (rpm): 800 – 4200 Power kW (with creep feed): 2.2 (3.5)