Used Silos for sale (628)

Year of construction: 1998, condition: good (used), Concrete bucket, concrete bomb, concrete silo Gtedpfx Agsb A Scno Eet -Concrete bomb: for concreting by crane -Contents: 500 liters -Crane slings -Dimensions: Ø 1100 x 1700 mm -Empty weight: 200 kg

Condition: used, Year of construction: 2013, functionality: fully functional, total width: 860 mm, total height: 1,800 mm, total length: 3,100 mm, briquette diameter: 65 mm, overall weight: 3,800 kg, We are selling our used briquetting press from the manufacturer Mütek, as shown in the photos. Model: MAP 750 Year of manufacture: 2013 Diameter: 65 mm Main motor power: 37 kW Feed auger gear motor: 2.2 kW Compactor auger: 5.5 kW Hydraulic pump motor: 0.37 kW Total connected load: approx. 47 kW Siemens PLC S7/300 controller with operating hours counter in the control cabinet Machine has CE marking Automatic start-stop function Dimensions: 3100 x 860 x 1800 mm (LxWxH) Gtodpfxexxyy Ee Ag Ejt Weight: 3,800 kg Included accessories: - Storage silo above the machine (6 m³) - Briquette channel extension without gate (2 m with stand) - Temperature control unit - Cutting device (trims briquettes to equal length) - Cyclone for material injection, incl. frame - Rotary valve The machine is still installed and operational, so a functional test on site is of course possible. Net price: €90,000. Gross: €107,100. VAT can be stated separately.

Condition: used, axle configuration: 3 axles, first registration: 09/2014, total length: 13,200 mm, total width: 2,550 mm, total height: 3,850 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2014, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy wheels = Remarks = Number of axles: 3, unladen weight: 6,450 kg, gross weight: 40,000 kg, chassis material: aluminium, kingpin size: 2 inch, alloy wheels, suspension type: full air suspension, ABS, EBS, body year: 2014, body material: aluminium, drum volume: 60, drum volume in: m³, number of compartments: 1, cargo type: silo, axle type: SAF = Further Information = General information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; tire tread left: 4 mm; tire tread right: 6 mm Axle 2: tire tread left: 13 mm; tire tread right: 13 mm Axle 3: tire tread left: 8 mm; tire tread right: 7 mm Weights Unladen weight: 6,450 kg Payload: 33,550 kg Gross vehicle weight: 40,000 kg Functional Number of compartments: 1 Environment Gtodpfjw Dngyox Ag Eot Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European makes, years of manufacture, and price ranges. Why buy from Kleyn Trucks? It's simple: • Large, fast-changing inventory • Recognizable quality • Good prices • Proper business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of ‘recognizable quality’ • And much more… Please visit our website for special offers and our complete stock. Leasing with Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly for our European warranty package.

Condition: used, Technical Data / Dimensions Available Quantity: 2 Volume: approx. 115,000 liters Container Type: Silo Condition: Used Food Grade: No Design: Vertical Internal Diameter: approx. 3,000 mm Cylindrical Height: approx. 15,600 mm Total Height: approx. 18,000 mm Weight: approx. 2,700 kg Specific Weight of Medium: 0.6 t/m³ Operating Pressure: Unpressurized Ground Clearance: approx. 1,000 mm Material / Properties Inner Casing Material: Aluminum Notes: Material: AlMg3 / AlMgSi Standing Type: Base Ring/Stand Frame Fastening: Fixed Top Bottom Type: Conical Grade: approx. 15% Bottom Bottom Type: Conical Conical Inclination: 90 degrees Top Bottom: 1 x Roof edge railing, height: 1,200 mm 2 x crane eyelets 1 x flanged connection DN 80 (filling) 1 x flanged connection for silo pilot 1 x venting connection Various connections for measurement and control technology Shell: 1 x service room door (approx. 1,800 x 850 mm) 1 x cable conduit 1 x filling line DN 80 8 x pipe holders Godswfrgyjpfx Ag Eott Subfloor: The silos end at the bottom in a 90° cone with a flange

Condition: used, Year of construction: 1983, functionality: fully functional, 1450 rpm Gtedpfx Asx Nh Twsg Eot 28.7 kW

Condition: excellent (used), mileage: 456,036 km, power: 316 kW (429.64 HP), first registration: 10/2013, fuel type: diesel, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, loading space length: 4,890 mm, loading space width: 2,500 mm, loading space height: 2,410 mm, Year of construction: 2013, Equipment: ABS, AdBlue, air conditioning, electric window regulation, power mirror, tail-lift, = Additional Options and Accessories = Gtedpfxot D S Uxs Ag Ejt - Leaf suspension - Speed limiter - Air suspension - Toolbox = Notes = VF624CP000005244 = Further Information = gross vehicle weight (GVW): 26,000 kg Technical condition: very good Visual condition: very good Please contact Sales for further information. = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber). MOB: Dutch (Available on WhatsApp and Viber). When you pay by bank transfer, the funds need to be transferred to our bank account shown below. Always verify the payment details on our website. If you have received different information, please contact us. If you have doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Year of construction: 2026, condition: excellent (used), Maize leveling blade, silo leveling blade, maize leveling blade -The shield is rounded for better material flow -Working width: 3000 mm Gtsdpjb A H Adsfx Ag Ejt -Sign height: 1250 mm -Wall thickness: 18 mm -Delivery time about 2 weeks -Weight can be made according to customer requirements -Weight: approx. 1000 kg

Condition: excellent (used), axle configuration: 3 axles, first registration: 12/2004, total length: 11,090 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/65 R22,5, Year of construction: 2004, Equipment: ABS, = Additional options and equipment = - Air suspension = Remarks = TRANSPORT TO ANTWERP 590 EURO = Further information = Tyre size: 385/65 R22.5 Axle brand: BPW Suspension: Air suspension Unladen weight: 8,020 kg Payload: 29,980 kg Gross vehicle weight: 38,000 kg Gtodpfx Ajx Nbdpsg Est Number of compartments: 8 Technical condition: very good Visual condition: very good

Condition: used, axle configuration: 3 axles, first registration: 09/2014, total length: 13,200 mm, total width: 2,550 mm, total height: 3,850 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2014, Equipment: ABS, = Additional Options and Equipment = - EBS = Notes = Number of axles: 3, Kerb weight: 6,450 kg, Gross weight: 40,000 kg, Chassis type: Full chassis, Chassis material: Aluminum, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body year of manufacture: 2014, Body material: Aluminum, Drum volume: 60, Drum volume unit: m3, Number of compartments: 1, Type of load: Silo, Axle type: SAF, Spare wheel = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Left tyre tread: 5 mm; Right tyre tread: 7 mm Gedpfx Ajw Hw Dasg Ejtt Axle 2: Left tyre tread: 9 mm; Right tyre tread: 14 mm Axle 3: Left tyre tread: 8 mm; Right tyre tread: 8 mm Weights Unladen weight: 6,450 kg Payload: 33,550 kg Gross vehicle weight: 40,000 kg Functional Number of chambers: 1 Environment Emission class: Euro 0 Maintenance APK (General Technical Inspection): valid until 04.2026 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our portfolio includes all European brands, years of manufacture, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Good pricing • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Skilled technical services • The assurance of 'recognizable quality' • And more… Please visit our website for special offers and a complete stocklist: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer ---- Type: CM 35 (Horizontal Silo) Axles and Suspension: Disc brakes 22.5" SAF axle assemblies, 3 x 9t with air suspension, axle spacing is 2 x 1310 mm, raising and lowering valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor equipment, 3rd axle liftable with Wabco Optiturn. Rims and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice, on Alcoa Ultra One aluminum rims, size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO air brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected. Landing Gear: Mechanical landing legs with two speeds, 2 x 20t support load, with pivoting foot. Electrical System: All lights in LED version, 24 volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis carrier, yellow side marker lights in prescribed quantity, rear position lights, front marker lights, rear license plate lights, lights according to standards 97/28/CE-2007/35/CE, 2 multi-chamber rear lights mounted at turntable height in aluminum brackets as per standards 97/28/CE-2007/35/CE, 2 rotating LED work lights mounted top left and right on the tank, yellow warning light at rear at hose pipe height, 2 x reversing lights in underrun protection, 2 x reversing lights at leg height (each separately switchable from the energy console). Tank Design: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank, with a capacity of 35,000 liters, tank warranty: 24 months from delivery, kingpin 2" according to standard 94/20/CE Gsdex Nufyspfx Ag Eett Operating Parameters: Pressure vessel as per the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 Bar – operating pressure 2.0 Bar, operating temperature -40° to +80° Filling Options: 3 manholes DN 450 with swiveling and folding dome lids. Each dome lid is pressure-tight, secured with 4 wing nuts, support for dome lids on top for storage, rain channel closed at front – open at rear. Material Discharge: 2 product outlet cones with synthetic fabric inserts for fluidizing, individual discharge lines DN 100 made of steel and connected to the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 ball valve with ring nozzle, remote control for the ball valve and Storz A coupling at the end of the discharge line. Air Piping: A 2.5" stainless-steel air manifold installed on the right-hand operation side. The air line is routed to the front up to the end of the silo with a check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold is equipped with ball valves for top air, auxiliary air, and fluidization. Top air 2" rear right, PRESSURE LINE INLET REAR RIGHT, external air intake Storz C at the air line tube, pneumatic connection with blow-off gun and spiral hose on top of the walkway near the access ladder, 1 x vibrator on top of the tank, air line located centrally on the walkway for cleaning with gun, air line below in tool box for cleaning with gun. Ladder and Access: 1 aluminum ladder mounted at the rear left of the vehicle, 1 pneumatic aluminum safety scissor handrail with locking system acting on the brake, 1 aluminum...

Condition: new, Year of construction: 2025, operating hours: 8 h, Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Gtjdpfx Asxfwdeg Eet Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, Year of construction: 2008, functionality: fully functional, • Manufacturer: Ellimetal N.V. • Country of manufacture: Belgium 2. System Identification • System type: Bulk goods silo system • Configuration: Group of three (3) vertical silos Gjdpsx Iuqyefx Ag Eott • Application: Storage and handling of powder/silicon dioxide (“powder”) 3. Year of Manufacture • Year of manufacture: 2008 4. Capacity and Construction Data • Maximum storage volume: 190 m³ per silo • Design specific weight: 0.6 kg/dm³ • Empty weight: 4,000 kg per silo • Operating pressure: Atmospheric 5. Construction Design • Vertical cylindrical steel silos • Truncated conical discharge hoppers • External vertical access ladders with safety cages 6. Discharge and Dosing Equipment • Discharge system with conical bottom • Integrated vibrating activators (“vibrators”) • Rotary airlock valve for controlled discharge 7. Conveying Equipment • Integrated screw conveyor/auger system • Conveying components painted green 8. Control and Operation • Local control panels assigned to: – Silo Silica 1 – Silo Silica 2 – Silo Silica 3 • Control functions for: – Vibrating bin activators – Rotary valves / airlocks

Condition: used, maximum load weight: 32,760 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2018, next inspection (TÜV): 01/2028, Year of construction: 2018, Internal vehicle number: G300368 Godpfxsxpbm Ij Ag Eett German vehicle Available immediately at our lot in Kaufungen - Kassel More INFO from: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Subject to errors and revisions We are happy to accept your used vehicle in part exchange. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, axle configuration: 3 axles, first registration: 11/2007, total length: 13,200 mm, total width: 2,500 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2007, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy wheels = Remarks = Number of axles: 3, Unladen weight: 6,700 kg, Gross weight: 40,000 kg, Chassis type: Full chassis, Chassis material: Aluminum, Kingpin size: 2 inch, Alloy wheels, Suspension type: Full air suspension, ABS, EBS, Body year: 2007, Drum volume: 60, Drum volume unit: m³, Axle type: BPW = Further Information = General Information Cab: Day License plate: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread left: 6 mm; Tire tread right: 15 mm Axle 2: Tire tread left: 14 mm; Tire tread right: 12 mm Gtodpfowp Aw Rex Ag Eet Axle 3: Tire tread left: 6 mm; Tire tread right: 5 mm Weights Unladen weight: 6,700 kg Payload: 33,300 kg Gross vehicle weight: 40,000 kg Environment Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world’s largest independent traders of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large and rapidly changing inventory • Recognizable quality • Good prices • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of "recognizable quality" • And more…. Please visit our website for special offers and our complete stock: Leasing through Kleyn Trucks is possible in most European countries! Calculate your lease rate quickly and submit a request through our website. Ask us directly about our European warranty package.

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Gsdpfjx Nugdjx Ag Eott Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, Year of construction: 2025, Good, used demonstration machine Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Gtjdpfod Nm Sijx Ag Eot Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: used, Year of construction: 1969, functionality: fully functional, Banbury Mixer No. 3 with Peripheral Equipment Documented Modifications/Upgrades: Year Modification / Upgrade 1962 Gearbox upgrade, Mixer III Gtodjx Itfpjpfx Ag Est 1973 Weighing and feeding system for Mixer III 1981 Exhaust system for Mixer III 1985 Batch-off machine, Mixer 3 1985 Temperature control unit, Mixer 3 1995 DC motor 1500 HP, 1700 V, 1678 A 1996 Upgrade to KSBI-L270 Mixer III 2007 Hose scale for Mixer No. 3 2008 Vibration measurement system, Mixer III 2008 Column slewing crane for bale handling, Mixer III 2009 Vacuum lifting system, Kneader III 2010 CMS system for Mixer III 2013 Slab strip cutter for Kneader III 2014 Plate feeding system for Kneader III 2014 Overhead conveyor, Kneader III 2014 2 × floor scales for Kneader III 2014 New control systems for Kneader III 2014 Cooling coils MUAFAN 1+2 – cooling line mill Mixer 2+3 2015 Monitoring system (Mixer I–III) for CMS-Kneader III 2017 Mixer body, Kneader III (replacement) 2023 Rubber Kneader III KSBI-L270 Control System: New control systems 2014, CMS system 2010, DC drive/Automax, PLC batch-off & conveyor, documented AC drives Maintenance/Condition: Regular modernizations and upgrades documented 1962–2023 Accessories/Options: Batch-off machine, plate feeding unit, installation conveyor, strip cutting device, floor scales, bale handling crane, vacuum lifting system, carbon black silos and weighing system, extruder, roll die, roll head with conveyor, cooling systems (dip tank, cooling line, discharge), control systems (DC drive, AC drive, Automax, PLC)

Condition: used, maximum load weight: 33,100 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 04/2008, next inspection (TÜV): 01/2028, loading space volume: 60 m³, Year of construction: 2008, Internal vehicle number: G300169 German vehicle At our yard in Kaufungen - Kassel, available immediately More INFO from: * Luis Lucena (German, English, Spanish, French) Gtsdpfx Aow H U E Hjg Ejt * Viktoria Sologubova (Polish, Russian, Ukrainian, English) STAMP IS DAMAGED Unladen weight: 7,100 kg Feldbinder KIP 60.3 Silo Year of manufacture: 2008 ADR AT SAF axles Next inspection of tank Subject to errors and omissions We are happy to take your used vehicle in part exchange. Financing directly available in-house. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer----Type: CM 35 Axles and Suspension: Disc brakes 22.5" SAF axle assemblies (3 x 9 t) with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn. Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Ultra One aluminum rims size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, compliant with standard 98/12/CE - ECE R13/09. Brake wear indicator connected. Landing Legs: Mechanical landing legs with two speeds, 2 x 20 t static load with swiveling foot. Electrical System: All lights LED version, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, yellow side marker lamps as required, rear position lamps, front outline markers, rear license plate lights, lights compliant with standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps mounted at the pivot height in aluminum brackets per 97/28/CE-2007/35/CE, 2 rotatable LED work lights on top left and right of the tank, yellow warning beacon at the rear at hose pipe height, 2x reversing lights on the underrun protection, 2x reversing lights at the leg height (each switchable on the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 35,000 L capacity. Tank warranty: 24 months from delivery. 2" kingpin as per standard 94/20/CE Operating Parameters: Pressure vessel in accordance with the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40°C to +80°C. Filling options: 3 manholes DN 450 with swivel and foldable manhole covers. Covers close pressure-tight with 4 wing nuts each, support on top for cover storage, rain rail closed at the front, open at the rear. Gedsx Nuf Hepfx Ag Estt Material Discharge: 2 discharge cones with synthetic fabric agitator inserts, individual discharge lines DN 100 made of steel combined at the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 shut-off ball valve with ring nozzle, remote control for shut-off ball valve and Storz A coupling at the end of the discharge line. Air Piping: 2.5” stainless steel air manifold mounted on the right-hand operator side, air line routed to the front, up to the end of the silo with check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold has ball valves for upper air, additional air, and agitation air. Upper air 2” rear right, PRESSURE INLET REAR RIGHT, external air connection Storz C on the air line rear RIGHT, pneumatic connection with blow-off gun and spiral hose on the catwalk near the access ladder, 1 vibrator top of the tank, air line center-top on the catwalk for cleaning with air gun, air line bottom in storage box for cleaning with air gun. Ladders and Access: 1 aluminum ladder mounted rear left of the vehicle, 1 pneumatic aluminum safety scissor railing with locking system acting on the brake, 1 aluminum safety walkway

Condition: new, Year of construction: 2025, operating hours: 9 h, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm Godogl Nlmspfx Ag Ejtt - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, mileage: 153,000 km, power: 368 kW (500.34 HP), first registration: 01/2014, fuel type: diesel, overall weight: 33,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 01/2028, color: orange, gearing type: automatic, emission class: euro5, loading space volume: 17 m³, Year of construction: 2014, Equipment: ABS, air conditioning, Internal vehicle number: G300331 German vehicle Available immediately at our yard in Kaufungen - Kassel More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Vacuum pump: 2,007 hours HD pump: 2,743 hours Vehicle Data — Scania R500LB 8x4 * Manufacturer: Scania * Model: R500LB 8x4 * First registration: 03.01.2014 * Engine: 15.6 l diesel, 500 HP (368 kW) * Transmission: Opticruise * Emission standard: Euro 5 * Seats: 2 * Axle spacings: * 1st – 2nd axle: 390 cm * 2nd – 3rd axle: 135 cm * Curb weight: 20,500 kg * Gross vehicle weight: 33,000 kg * Payload: 12,425 kg * Gross train weight: 66,000 kg * Suspension: Air suspension ----Body — Müller CM F 170 KT (Year of construction 2013) * Sludge tank: 10 m³ * Water tank: 7 m³ * Water tank + hot water tank * Uraca high-pressure pump: 170 bar * Sludge suction function * Snow plow mount at the front * 2 radio remote controls * Frost protection: * 2 × Webasto heaters on the body * 1 × Webasto in the cab * Body year: 2013 HIGH-PRESSURE PUMP Manufacturer: Uraca Type: KD 718/60 Pump no.: HD-11305664 Max. pressure (bar/liters/min): 170/325 Godexc R Uhepfx Ag Ejtt Max. speed (rpm): 1516 VACUUM PUMP Manufacturer: CVS Type: W 1600 Pump no.: 92009002/164 Max. output (cbm/h): 1540 Max. speed (rpm): 1501 Max. continuous operation pressure (bar): 0.5 DISCHARGE WHILE TIPPING SUCTION HOSE CASSETTE Technical equipment and vehicle features * Total height: 3,900 mm * Operation at subzero temperatures: Equipped with frost protection system and can operate down to -5 °C. * Webasto heaters: A total of three Webasto air heaters: * Two units on the body (for system frost protection) * One unit in the driver’s cab * Water heating / hot water circulation: Vehicle fitted with hot water tanks. * Technical defects: Currently, no known defects or repair needs. * Tank separation: Fresh and wastewater compartments are separated via a tipping silo. * Condition of chassis frame: The frame is in very good, clean condition with no visible rust damage. ----Additional information * Side-mounted water tanks: Yes, two stainless steel (VA) side water tanks – one each on the right and left side. Capacity per tank: approx. 3,500 liters Financing example: * Internal number: G300331 * Purchase price: €142,900.00 * Down payment: 10% * Term: 60 * Monthly rate: €2,238.16 * Residual value: €28,580.00 If you are interested in this offer, or would like to have it customized to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors excepted. We are happy to take your used vehicle in part exchange. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer----Type: CR 60 Chassis: Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and Suspension: Disc brakes 22.5" SAF axle assemblies, 3 x 9 t with air suspension. Axle spacing is 2 x 1,310 mm. Raise/lower control valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor equipment, 3rd axle liftable with Wabco Optiturn Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice of Alcoa Dura-Bright aluminium rims in 11.75 x 22.5 ET 120 Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, in compliance with Standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing Gear: Mechanical landing legs with two speeds, 2 x 20 t support capacity with swiveling foot, rear crank landing gear Gjdpfxjx Nuf Tj Ag Eott Electrical System: All lights in LED version, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis rail, yellow side marker lights in the required number, rear position lights, front clearance lights, rear license plate lights, lights according to Standard 97/28/CE-2007/35/CE, two multifunction rear lights mounted on aluminium brackets at the level of the pivot bearing as per Standard 97/28/CE-2007/35/CE, one LED work light on the tank, yellow warning beacon at rear mounted at hose pipe height, 2x reversing lights in the underrun protection, 2x reversing lights at support height (each individually switchable from the power console) Tank Construction: Horizontal tank made of aluminium alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank with a 60,000-litre capacity. Tank warranty: 24 months from delivery Operating Parameters: Pressure vessel in accordance with Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar – operating pressure 2.0 bar, operating temperature -40° to +80°C Filling Options: 5 manholes DN 450 with swing and folding dome covers. Dome covers tightly sealed with 4 wing nuts each, rubber support for dome covers on top for stowage, rain gutter closed at front – open at rear Material Discharge: 1 discharge cone DN 800 in stainless steel (INOX), folding with INOX disc for loosening, discharge cone laterally swivelling, shut-off valve DN 150 with white seal, connection: STORZ-A Air Piping: 2.5" stainless steel air manifold mounted on the right operating side, one 4" stainless steel air distribution pipe mounted at the rear of the tank, air valves (shut-off valves) in INOX, top air hose and air connection hoses with 2" STORZ couplings, micron filter, vacuum valve on top of tank, 1x vibrator 1 m before the pivot bearing Access Ladder and Walkway: 1 aluminium ladder mounted rear left on the vehicle, 1 aluminium safety scissor handrail deployable from below with separate folding ladder section and parking brake when open, 1 aluminium safety catwalk runs along the top left of the tank, anti-slip coating on the tank Hose Storage: 4 hose tube containers, 5 m long, DN 200 made of aluminium with 4 DN 100 hoses and STORZ couplings, hose tube with compressor hose D.76 Accessories: Side-mounted ...

Condition: used, maximum load weight: 35,080 kg, overall weight: 39,300 kg, axle configuration: 3 axles, first registration: 08/2018, next inspection (TÜV): 01/2028, Year of construction: 2018, Internal vehicle number: G300168 German vehicle Located at our yard in Kaufungen - Kassel, immediately available More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) OMEPS CM27 Year of manufacture: 2018 Axles: SAF 27,000 liters Unladen weight: 4,220 kg Gtjdpfx Ajwgt Uhjg Est Max. permitted total weight: 38,000 kg Financing example: * Internal number: G300168 * Purchase price: €32,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €515.29 * Residual value: €6,580.00 If this offer interests you or if you want to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call! Errors and changes excepted. We are happy to accept your used vehicle in part exchange. Financing possible directly through us. GOLEC Nutzfahrzeuge GmbH Languages spoken: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Semi-Trailer – Type: CR 47 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" king pin, tipping cylinder: Hyva Axles and Suspension: Disc brakes 22.5" SAF axle units, 3x 9t with air suspension, axle spacing is 2 x 1310 mm, raise/lower valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Gtsdpsx Nufmsfx Ag Est Rims and Tyres: 6 wheels fitted with 385/65 R22.5 tyres, as per manufacturer’s choice on Alcoa Dura Bright aluminium rims, 11.75x22.5 ET 120 Brake System: WABCO EBS 4S/2M compressed air brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake pad wear indicator connected Landing Legs: Mechanical landing legs, two speeds, 2x 20t support load with swiveling foot, rear without support Electrical System: All lights in LED version, 24 volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis, yellow side marker lights in the required number, rear position lights, front outline marker lights, rear license plate lights, lighting in compliance with standard 97/28/CE-2007/35/CE, 2 multi-chamber lights mounted at pivot height on aluminum brackets in compliance with standard 97/28/CE-2007/35/CE, 1 LED work spotlight mounted on the tank, yellow warning beacon at the rear at hose tube height, 2x reversing lights on underrun protection, 2x reversing lights at the height of the supports (each switchable on the energy console) Tank Design: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank, with 47,000 liters capacity, tank warranty: 24 months from delivery, operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40° to +80° C Filling Options: 4 manholes DN 450 with swing and folding domed covers. The dome covers are closed pressure-tight with 4 wing nuts each, rubber supports for the domed covers at the top for storage, rain guard at the front closed - rear open Material Discharge: 1 discharge cone DN 800 made of stainless steel (INOX), foldable with INOX disc for loosening, discharge cone swivel-mounted laterally, shut-off valve DN 150 with white seal, connection: STORZ-A Air Piping: One 2.5" stainless steel air manifold pipe mounted on the right-hand control side, one 4" stainless steel air distribution pipe mounted at the rear of the tank, air valves (shut-off valves) in stainless steel, top air hose and air connection hoses with 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the pivot bearing Ladder and Access Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety folding guardrail deployable from below with a separate ladder part, equipped with parking brake when opened, 1 aluminum safety walkway running along the left on top of the tank, non-slip coating on the tank Discharge Hose Storage: 4 hose tube containers 5m in length, DN 200 made of aluminium with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection...

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Semi-Trailer----Type: CR 47 Chassis: Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400mm, 2" king pin, tilting cylinder: Hyva Axles and Suspension: Disc brakes 22.5” SAF axle assemblies 3x 9t with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit adaptation, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer’s choice on Alcoa Dura Bright aluminum rims in 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing Gear: Mechanical landing legs with two speeds, 2x 20t static load with swiveling foot, rear without support Electrical System: All lights in LED design, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis beam, yellow side marker lights in required quantity, rear position lights, front clearance lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lights installed at the level of the pivot bearing in aluminum consoles according to standard 97/28/CE-2007/35/CE, 1 LED work light on the vessel, yellow warning light at the rear mounted at the height of the hose pipes, 2x reverse lights in the underrun protection, 2x reverse lights at the height of the supports (each switchable at the power console) Gjdpfxjx Nufts Ag Ejtt Tank Specification: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, capacity 47,000 liters, 24-month tank warranty from delivery. Operating parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar - operating pressure 2.0 bar, operating temperature -40° to +80° Filling Options: 4 manholes DN 450 with swiveling and folding covers. Each cover is sealed under pressure with 4 wing nuts, rubber support for domed covers at the top for storage, rain strip closed at front, open at rear Material Discharge: 1 material discharge cone DN 800 made of INOX, foldable with INOX disc for material loosening, discharge cone swivels laterally, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: A 2.5” stainless steel air manifold pipe mounted on the right-hand operator side, a stainless steel air distribution pipe 4” mounted at the rear of the tank, air valves (shut-off flaps) in INOX, top air hose and air connection hoses feature 2” STORZ couplings, Micron filter, vacuum valve at the top of the tank, 1x vibrator 1m before the pivot bearing Access Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail with a separate foldable ladder section deployable from below with parking brake when open, 1 aluminum safety walkway along the upper left side of the tank, anti-slip coating on the tank Conveying Hose Storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum design