Cutting mill 18.5 kW

Rapid GK 4535-KU

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Hodpjua Tbwsfx Adweu Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Granulator, separator for copper or aluminum cables. Feed rate: 9 m/min Hodpfjxxirwsx Adweu Capacity: 150 kg/h of granulated cable. Granules approx. 3 mm and a copper content range of 50%. 15 kW 400 V 50 Hz INSTRUCTION AND MAINTENANCE MANUAL AVAILABLE

Condition: excellent (used), overall weight: 19,500 kg, chain condition: 95 %, Year of construction: 2024, operating hours: 615 h, Equipment: air conditioning, Komatsu D61 PX-24E0 Year: 2024 Operation hours: 615 hrs. ROPS Airco Radio Back drive camera U/C: approx. 95% good trackshoes: 850 millimeter width Hedpfxszr Epxe Adwou PAT -Blade ripper valve CE / EPA Transport: 5.5 x 3 x 3.15 Operation weight: 19.5 to

Condition: used, Year of construction: 2004, operating hours: 17,800 h, Equipment: ABS, all wheel drive, Wheel loader not ready for operation!!! * 124 kW diesel engine * Loading bucket Hjdpfjzah Unex Adweu * Enclosed cab * Radio * Air conditioning ----Vehicle number 11897 ----Errors and prior sale excepted

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials. Throughput is highly dependent on the screen and the input material: - up to 60 kg/h for EPS with a 15 mm screen *the coarser the screen, the higher the throughput. Motor 9.2 / 11 kW - 400 Volts, sturdy steel construction, hardened cutting blades, screen with interchangeable inserts, optional hole sizes: (8), (10), 15, 22, 26, 30, 40, or 60 mm with electric drive, star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge nozzle 150 mm, optional for plastic or corrugated pipes, blowing distance approx. 12 m, chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) weight approx. 240 kg, Spare parts prices and options: 24 hardened blades, €9.90 each (net) 6 bolts, €14.90 each (net) 1 screen, €475 (net) Hsdpfxjh S H T Us Adwsu 1 cover, €290 (net)

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request Hsdpfx Adotqfhxjweu The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: new, Year of construction: 2024, power: 15 kW (20.39 HP), GT SERIES KNIFE MILLS MACHINES HOUSED IN SOUND-ABSORBING ENCLOSURES, COMPLETE WITH BIG-BAG STATION OPEN ROTOR WITH V-CUTTING SYSTEM THE FOLLOWING MILL SIZES ARE CURRENTLY AVAILABLE IN STOCK GT300/600 ROTOR DIAMETER 300MM ROTOR LENGTH 600MM Hjdpfjudyghjx Adwsu MAIN MOTOR 15KW ROTOR EQUIPPED WITH V-SHAPED KNIVES

Condition: excellent (used), functionality: fully functional, power: 55 kW (74.78 HP), fuel type: diesel, fuel consumption per hour: 12 l/h, fuel tank capacity: 280 l, color: yellow, empty load weight: 24,600 kg, operation weight: 25,000 kg, drive condition: 100 %, chain condition: 100 %, emission class: euro5, Year of construction: 2024, operating hours: 875 h, machine/vehicle number: 21N1217, Equipment: hydraulics, steel tracks, Description Used K4 demo scalper for sale Make Keestrack Model K4 Hjdpozdifdefx Adweu Year of make 2024 Working hours 875 Serial number 21N1217 Capacity up to 350 t/h Condition In perfect working condition, demo machine Weight 24,5 t Engine Deutz TCD 3.6 L4 Emission class Stage V / Tier IV final Transport dimensions L x H x W: 10.75 m x 3.25 m x 2.78 m Working Dimensions L x H x W: 13.30 m x 3.88 m x 14.30 m Equipped with: Radio Remote Control 10 Functions For Tracks And Functions Light holder with 4 LED lights 45 Watt, 4500 Lumen Umts Modem With Gps Tracking System - Telematic system Central greasing system KT-MAX 24V Screen flow break Walkway next to screenbox No screen decks are installed ! Location Bilzen-Hoeselt - BELGIUM Sales conditions EXW, Payment in advance

Year of construction: 2025, operating hours: 2 h, condition: like new (used), functionality: fully functional, DG 2660 E granulator, 15 kW, rotor width 600 mm, rotor diameter 260 mm, 3 rows of knives, V-cut, 2 rows of counter knives. With soundproof enclosure. Showroom machine, as good as new. Hedov Iqyxopfx Adwju

Condition: used, Year of construction: 2019, operating hours: 9,096 h, Equipment: all wheel drive, Internal vehicle number: MK300028 Available immediately More information at: Luis Lucena Hodpey Dmwwjfx Adweu Viktoria Sologubova CAT 972M XE wheel loader with 4.8 m³ rock bucket – 24.9 tonnes – 9,096 operating hours German Caterpillar 972M XE wheel loader from a private owner. The machine was manufactured in 2019 and comes with a large, permanently attached special rock bucket. Equipped with all-wheel drive, a 250 kW engine, and air conditioning. The last documented service, including an oil change and inspection, was performed on February 24, 2026, at 9,094 operating hours. The next service is scheduled for 9,500 operating hours. Technical specifications: * Vehicle number: MK300028 * Vehicle condition: Used machine * Category: Wheel loader * Manufacturer: Caterpillar * Model: 972M XE * Year of manufacture: 2019 * Operating hours: 9,096 hours * Power: 250 kW * Operating weight: 24,900 kg * German vehicle * Previous owner: Private Equipment: * All-wheel drive * Air conditioning * Enclosed operator cab * Special rock bucket * Bucket included Bucket specifications: * Design: Special rock bucket * Suitable for: CAT 972M * Mounting type: Permanently attached * SAE bucket capacity: 4.80 m³ * Cutting width: 3,200 mm * Weight: 3,300 kg * Serial number: 14348-1 * Year of manufacture of bucket: 02/2016 * Client: Zeppelin Baumaschinen GmbH * Manufacturer: Resch-Ka-Tec GmbH * Made in Germany Maintenance information according to service label: * Last service at 9,094 operating hours * Service performed on February 24, 2026 * Oil change performed * Inspection performed * Coolant protection checked to -46 °C * Next service at 9,500 operating hours Inspection and functional testing are possible by prior appointment. Further information, photos, and videos are available upon request. Errors, changes, and prior sale are subject to change.