Used Sieve for sale (384)

Condition: used, Manufacturer: ChauvinType: vibrating sieveNumber of separation stages: 1Screen diameter: Ø 650 mmMaterials in contact with the product: stainless steelScreens available (3 mm and 0.315 mm)Power supply: three-phase (240 or 400)Weight: 100 kg Prodpfx Aasx Akaks Eof

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Podpfx Aasd E R D So Ejrf Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: ready for operation (used), Screening machine KRUPP 21/55-2 Podpfxen Unkfj Aa Ejrf Brand: Krupp Surface: 5500 x 2100 mm – 2 Decks Upper deck: sieve opening [] 35mm Lower deck: sieve opening [] 16 x 3mm Driving : 22 kW Incl.: springs and spring consoles In stock: 2 pieces

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, The Glöckner K 225.5 circular cooler is particularly suitable for the animal feed, chemical and food industries. The round cooler has been completely overhauled. Dimensions: diameter 2,250mm; height 4,000mm. Throughput: approx. 2,500kg/h; inlet moisture: approx. 10%; bulk density: approx. 650kg/cbm; inlet temperature: 50 degrees; outlet temperature: ambient + 3 degrees; size of pellets: approx. 10mm Podotqt Utjpfx Aa Eerf The cooler consists of 5 cooling decks, with round lids and made of stainless steel. Inlet housing with adjustable baffles, mild steel housing, stainless steel baffles. Even product distribution through distributor rakes. Stainless steel on each sieve deck. Stainless steel baffle plates for optimum product guidance. Sieve segments made of stainless steel; perforation 3-5 mm. Material of the complete cooler made of mild steel, sandblasted, primed and painted. Direct drive by frequency-controlled gear motor, max. 0.55 kW. Non-contact door safety switch. One inductive proximity switch per deck to switch off in the event of overload. Sensor for monitoring the layer height. Drawing available. Control: Attached terminal box for wiring. Connection to on-site control system.

Condition: new, Spare parts for Doppstadt Rotaro for sale: Psdpfx Aex E T Dyea Eerf - various sieve baskets - 2 pcs of afterpress units - flywheels - control cabinets with Schneider control - control cabinets with frequency inverter

Condition: good (used), Dirt traps, flanged dirt traps, filters, coarse or fine sieves, coarse filters, water filters -Manufacturer: AW Armaturen Wolff, Coarse filter, corner shape -Type: AW 603.0 PN 2.5 DN 300 GG25 603300 -Sieve plate, mesh size: Ø 2mm, material: stainless steel -Dimensions: 700/50/H533 mm -Weight: 163 kg Psdeipwb Sopfx Aa Ejrf

Condition: used, Manufacturer : Gericke Prodjx Ai Sxjpfx Aa Ejf Model : NBS 200/200 Type : Nibbler Year: – Power motor : 1,1 kW / 1500 RPM Sieve : Ø 5mm Atex : Ex II d IIC T4 Machine size : 60 x 85 x 125 cm Weight : 55kg

Condition: used, Year of construction: 1991, total length: 6,450 mm, total height: 2,200 mm, total width: 2,200 mm, Komplett mit Förderband und Magnet - Year: 1991 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 45 - Rotation speed [rpm]: 982 - Hydraulic unit power [kW]: 7.5 - Oil tank capacity [L]: 110 - Rotor width [mm]: 1000 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 2300 - Opening width [mm]: 2500 - Opening length [mm]: 3200 - Sieve perforation [mm]: 200 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 6450mm x 2200mm x 2200mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Pedpfxjww T U No Aa Eorf Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Psdpfxex Iwfms Aa Eorf Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Year of construction: 2002, condition: good (used), For sale 4 Getecha sprue mills with screw conveyor Type: GRS 182 - A 2.29 year of construction 04/2002 Volt: 400 Amp.: 2.29 Granules sieve dm 5 mm Machines purchase / sale Psdshzqzrepfx Aa Ejrf PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Year of construction: 1999, condition: good (used), Used Bühler controlsieve 4kW Drive Pedpfjhq Hq Sjx Aa Eerf Stainless steel sieve ø1mm Inlet ø200 Outlet ø200

Condition: good (used), Bead mill, agitator mill, shredder, crusher, grinder -Spare parts: 1x bead mill sieve, 1x bead mill screw, 1x bead mill wheel (see pictures) -Dimensions: 500/500/H165mm, 480/480/H175mm, 370/370/H70mm Predpfx Aaeiqu R De Esf -Weight: 74 kg net complete

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 18.8 kW (25.56 HP), RegloChill RC2E 20 warehouse no.: 503608 type / device: chiller manufacturer: RegloChill type: RC2E 20 year of construction: 2016 - Ecological refrigerant R407C - High efficiency rotating Scroll motor compressor groups - Molecular sieves dehydrating filter - Liquid level sight glass - High efficiency copper tube aluminum finned condenser - Solenoid valve - Safety pressure switches for high and low gas pressure - Copper evaporator, with high efficiency water-gas exchange stainless steel plates connection power: 12 A Prjdpfxjxz Dt Is Aa Esf cooling medium: R407C cooling capacity: 18,8 kW voltage: 400 V - 50 Hz

Condition: used, total length: 3,100 mm, total height: 1,550 mm, total width: 1,850 mm, Empty weight: 5.000 kg Pjdewf U Aqjpfx Aa Ejrf - Documentation available: No - CE certificate present: No - Main motor power [kW]: 30 - Rotation speed [rpm]: 1470 - Hydraulic unit power [kW]: 3.4 - Oil tank capacity [L]: 75 - Rotor width [mm]: 1150 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 1000 - Opening width [mm]: 2580 - Opening length [mm]: 2180 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 63 +/- - Transport dimensions: 3100mm x 1850mm x 1550mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, Weima HWN-2-1000 chipper for shredding wood and similar materials such as plastics or cardboard. The machine features a robust design, a large feed hopper, and two powerful rotors for continuous material feeding. Optional new blades available at an additional cost. rotor diameter: approx. 354 mm rotor length: 1.000 mm Pedexvzzxepfx Aa Ejrf Number of knives: 2 x 72 drive power: 2 x 18.5 kW Dimensions: 2.4 x 2 x 2 m sieve size: 10 mm

Condition: used, Dinnissen Dima 1200 bag emptying machine bag cutting machine stainless steel Machine has been overhauled. Equipped with new running wheels, bearings, clamps, etc. Capacity: 1200 bags/hour Prsdsx D U Nlepfx Aa Ejf Completely made of stainless steel Drum motor power: 2x 1.5kW 124rpm Cutting rotor motor power: 2x 5.5kW 211rpm Cutting chamber with double rotor is mounted on top of the infeed hopper of the drum sieve See our other advertisements VMA Wekerom

Condition: used, overall weight: 1,500 kg, rotor diameter: 252 mm, total length: 1,800 mm, total height: 2,000 mm, total width: 1,200 mm, rotor width: 600 mm, power: 18.5 kW (25.15 HP), rotational speed (max.): 90 rpm, filling opening width: 600 mm, filling opening length: 800 mm, No. 3255 Single-shaft shredder WEIMA WL 4 Used Quiet-running and slow-running Pedpfx Asx Hhk Rja Eerf V-rotor system Motor power main drive 18.5 kW Rotor diameter 252 mm Rotor width approx. 600 mm Rotor speed approx. 90 rpm Hopper volume 0.6 m3 Inlet cross-section 800 x 600 mm LW Reversible blades, concave ground Automatic operation / manual operation Sieve perforation 15 mm Suction nozzle 160 mm Transport dimensions approx. 1800 x 1200 x 2000 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Year of construction: 1995, condition: good (used), Single-shaft shredder, waste shredder, cutting mill, auxiliary mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Condition: Single-shaft shredder is equipped with a good set of blades. -Manufacturer: Vecoplan, Side-mounted mill cutting mill -Type: VAZ120/105 -Processing capacity: 200-3000 kg/h -Number of sieves: 2 pieces Ø20 mm, Ø30 mm -Drive motor: 18.5 kW -Number of cutting blades: 27 pieces Psdpfjxlcqtex Aa Eorf -Number of counter blades: 1 piece -Inlet cross-section: 1240 x 1075 mm -Rotor width: 1075 mm -Rotor diameter: 230 mm -Dimensions: 2000/2700/H2370 mm -Weight: 2800 kg

Year of construction: 2019, condition: ready for operation (used), Additional Equipment Number of Blades: 111 Sieve: Ø 30 mm Mass (m): 140 kg Pusher Feed Behavior: 144 A Prsdox D Dpuepfx Aa Eef This VECOPLAN VHZ 1600 was manufactured in 2019. A robust wood shredder featuring an ESC drive with a powerful 90 kW motor and a rotor speed of 206 1/min. It includes 111 blades and a sieve size of Ø 30 mm, ensuring efficient processing with a throughput of 4200 kg/h. Consider the opportunity to buy this VECOPLAN VHZ 1600 wood shredder. Contact us for more information. Application Types Other Woodworking Machinery

Condition: used, Year of construction: 1991, total length: 1,660 mm, total height: 1,470 mm, total width: 1,100 mm, Empty weight: 1.300 kg - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 500-1014 - Main motor power [kW]: 18.5 - Rotor width [mm]: 600 - Opening width [mm]: 600 - Opening length [mm]: 800 - Sieve perforation [mm]: 15 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 1660mm x 1100mm x 1470mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information Predpewu Uy Ijfx Aa Eef VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2018, condition: excellent (used), Complete powder packing system for manufacturing and filling bags up to 10kg. The plant was purchased in 2017/2018 and has only been used very lightly (approx. 60 tonnes in 2024). The system comprises of the following equipment: 1 x Entecon stainless-steel powder sieve fitted to stainless-steel frame. Overall dimensions - 1100mm x 930mm x 2200mm high. 1 x Entecon AMC blower conveyor with control box. 1 x Busch vacuum lifting system. Model - SB 0310 D 0H0 UH XX. Pjdpfx Aewa Ilhoa Ejrf 1 x Fluidiser with high and low level probes. 1 x All-Fill powder auger filler with agitator and outfeed tube. Model - S10. 1 x Gainsborough Engineering Co. GV4 vertical form, fill and seal bagging machine (2018) fitted with Markem Imaje Smart-Date X60 thermal printer. Sealing bars - 430mm (horizontal) and 600mm (vertical). Current film - 840mm wide. Used to produce 400mm wide bags. 1 x Gainsborough Engineering Co. mobile outfeed conveyor. Infeed - 200mm. Outfeed - 1000mm. 1 x OCS Checkweighers GmbH HC check weigher (2017) to weigh up to 30kg. Type - HC. Weigh table dimensions - 800mm long x 60mm wide. 1 x Declined roller conveyor on height adjustable feet, all stainless steel. Roller bed width - 800mm. Overall dimensions - 1210mm long x 880mm wide x 870mm high (+130mm max). *Please note - if you require a metal detector for this line then please enquire with us, we can supply a suitable unit* Please contact for more details and to arrange a viewing.

Condition: good (used), Year of construction: 2016, operating hours: 27,412 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, controller manufacturer: Siemens, controller model: 840D sl, table width: 400 mm, table height: 30 mm, table length: 500 mm, table load: 500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,956 h, coolant supply: 80 bar, spindle motor power: 32,400 W, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a Starrag HEC 400 F 4-axis machining center, which was fully inspected and overhauled at the Starrag factory in 2022. All relevant components were checked and, where necessary, adjusted or replaced. Since its installation in 2022, the machine has been in operation at our facility and is currently under power in ongoing production. It is in well-maintained technical condition and has been regularly serviced. Technical Highlights - Starrag HEC 400 F – 17211, 4-axis machining center for milling / drilling / turning - Control: Siemens Sinumerik 840 D solution Line with NCU710 and PLC integration - Spindle: HSK-A63 motor spindle, speed range 50 – 18,000 rpm, torque 130 Nm (25% duty cycle), power 32.4 kW / 24 kW (100% duty cycle) Predpjx H Idkofx Aa Ejf - Factory inspection in Chemnitz 2022: all assemblies checked, adjusted, and replaced as necessary - Direct drive CNC rotary table, 80 rpm, 400 Nm drive torque, tangential moment 3,000 Nm - Siemens spindle diagnostics & remote diagnostics (Teamviewer) - Energy-efficient system with regeneration and standby mode for energy savings Working Area & Dimensions - Travel paths (X/Y/Z): 650 / 650 / 680 mm - Pallet size: 400 × 500 mm with 57 × M12 threads - Max. workpiece height: 850 mm • Max. pallet load: 500 kg - Pallet changer: 2 pallets – automatic, changeover time approx. 8 s - Tool magazine: 60 tool pockets (chain magazine) • Chip-to-chip time 3 – 4 s - Chip conveyor: scraper belt conveyor with vacuum gap sieve, discharge height 1,050 mm - Machine dimensions (L × W × H): approx. 5,150 × 2,800 × 3,025 mm - Machine weight: approx. 11,500 kg - Noise emission: ≤ 80 dB(A) according to EN ISO 3744 Additional Equipment - Clamping hydraulics, 6-channel (90 bar) at setup and working positions - Increased spindle torque (130 Nm) for heavy-duty machining - Torque support with axial support - Coolant system: connection to central supply including return and temperature compensation - Increased coolant pressure to 80 bar through spindle center - Optical probe Renishaw OMP60 including Siemens measuring cycles - Tool breakage detection (mechanical, parallel to main time) - Pallet sequence operation + crane infeed/outfeed (software) - Signal tower (4-color) for machine status indication - Working area/machine equipment: shower, rinse gun, vortex nozzle, emission extraction interface, foot pedal blow-off nozzle - Documentation: fully digital (PDF) Operating hours / machine run times - Power-on hours approx. 27,412 h (as of Oct 2025) The counter runs whenever the machine is powered on – including during setup, maintenance, or standby periods. - Spindle operating time total 9,956 h Special features - OPTIONAL: with perfect postprocessor and CAM software TOP Solid (at extra cost) - Under power – demonstration possible at any time - Direct from production – not a dealer sale - Complete technical documentation available - Support for dismantling, loading, and transport possible (for a fee) The tool holders and vise visible in the photos are not included in the offer, but can be purchased separately on request. Price €140,000 net, negotiable for quick completion. All information has been prepared to the best of our knowledge and belief. Subject to prior sale, error, and change.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Available immediately! Function Easy operation thanks to a fully automatic cleaning process, allowing professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaner (washing solution). The contaminated items are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed around its own axis. The pump units draw the washing solution from the tank and distribute it through 6 stainless steel jet pipes with overlapping flat spray nozzles. The items are intensively sprayed from all sides with the hot solution due to the uniform rotation of the motor-driven basket. Once the cleaning process is complete, the unit shuts off automatically. Advantages - 2 horizontally mounted pumps - 6 three-dimensional stainless steel jet pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket, V-belt drive via separate motor - Steam extraction - Stainless steel sieve plate with filter basket above the wash tank - Suction filter in front of the pump chamber - Water shortage safety feature - Individually height-adjustable feet Technical Data Psdpfjx Izwmox Aa Eerf Capacity dipping tank / basket: 280 l Diameter dipping tank / basket: 1150 mm Load capacity: 350 kg / optional 500 kg Temperature min. - max.: 0-60 °C Working height: 700 mm Dimensions (W x D x H): 1570 x 1510 / 1830 x 1495 / 2175 mm Weight: 250 kg Heating power: 10 kW Spray amount: 2x10800 l/h Pump pressure: 2.3 bar Material: Stainless steel Electrical connection: 13.5 kW / 400 V / 50 Hz / 32 A

Condition: used, total length: 1,400 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 500 kg Price: On request Granulator Dreher S26/26 VS Machine No. K 8329 Built in 1982 Engine 5.5kW Speed 1440 Rpm. 2 fixed blades 3 rotating blades (need to be replaced) Funnel opening: 360x240 mm Pedpfxswh Naie Aa Esrf Interchangeable strainer Sieve holes 6mm - Documentation available: No - CE certificate present: No - Main motor power [kW]: 5.5 - Rotation speed [rpm]: 1440 - Opening width [mm]: 360 - Opening length [mm]: 240 - Sieve perforation [mm]: 6 - Number of rotating knives [pcs.]: 3 - Number of fixed knives [pcs.]: 2 - Transport dimensions: 1400mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2003, operating hours: 10,120 h, total length: 1,800 mm, total height: 1,700 mm, total width: 1,200 mm, Empty weight: 1.300 kg Price: On request Shredder Predpjwh Na Njfx Aa Eof Untha LR 630 Year of construction 2003 Input opening: 624 x 792 mm Throughput speed: material and sieve dependent Rotor diameter: 248 mm Rotor speed: 86 - 96 rpm Engine power: 15 kW Cutting system: 17 knives Sieve diameter 24mm Transport dimensions 1800*1200*1700mm (L*W*H), Weight 1300kg - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: LR632318 - Operating hours: 10120 - Transport dimensions: 1800mm x 1200mm x 1700mm (l x w x h) - Transport weight [kg]: 1300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels